Organization Name Tender Results

Desktops

Desktops

surgical isolation or surgical masks Surgical Isolation Or Surgical Masks ( 325000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Conformity to EN 14863 true Fabric material non woven fabrics - GSM of the Fabric (G/m2) 35 Pleated Construction of Mask To provide adujstable and leakproof fitting - No of Layers or Plies of Fabric 3 3 Bacterial filteration efficiency (BFE)(%) >=99 >=95, >=98, >=99 Splash resistant true Breathing resistance (mm of H2O/cm2) <=5(Splash Resistant) <=3(Non-Splash Resistant), <=5(Splash Resistant) Securing Loops Tie - Adjustable Flexible nose clip With - Colour Blue - DIMENSION Length 19.5 - Width 9.5 - CERTIFICATION Submission of Test Yes - 1/2 Report to the buyer on demand from NABL ILAC accredited or Central Government Lab to prove conformity of products to the specification Certification ISO - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajendra Kumar Chopra 110095, Guru Teg Bahadur Hospital, Dilshad Garden 325000 15

Potable water purification system Potable Water Purification System ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values EQUIPMENT TYPE & FEATURES Type Electrically Operated Reverse Osmosis based water purifier Electrically Operated Reverse Osmosis based water purifier, Gravity operated water purifier, Water Purifier electro- deionization Based Ultraviolet (UV) LAMP Yes Yes, No Ultra Voilet (UV) Lamp power consumption 16 * STANDARDS Conformity to Indian Standrad for System IS 14724 (latest) for water purification system with Ultraviolet disinfection * Number of float valves/sensors 2 1-5 INPUT PARAMETERS Input Water TDS 3000 1000, 2000, 3000, 4000, 5000 OUTPUT PARAMETERS Recovery at 27 degree Centigrade 90-100 25-35, 30-40, 90-100, 70-80, 50-60 Output Water of RO system Conforming to IS 10500(latest) * 1/3 Indian Standard Output water capacity (Litre/Hour): 100 10, 25, 50, 100, 250, 500, 750 Arsenic and Floride removal capability false true, false Misc, warranty etc Thin-film composite membrane No Yes, No, NA High Pressure Pump No * Raw water/Chemical Raw water/Chemical Cleaning PUMP Yes Yes, No Pre Filter Vessels: No Yes, No Micron Filter Yes Yes, No Membrane Housing Yes Yes, NA Auto cut Yes Yes, No No of candles (Nos) 5 1-5 Installation Type Floor mounted Table top, Wall mounted, Floor mounted, Floor mounted & enclosed Warranty period ( for free replacement of machine 2 2, 3, 1 (or higher) Warranty Period (for scope including free of cost candle and activated carbon onsite replacement twice a year) 2 2, 1 (or higher) Antiscalant- where silica is up to 100 ppm/where Mica is up to 100 ppm No Yes, NA Chloride & Flouride removal facility Yes without pump Yes with Pump, Yes without pump, No Test Report Availability of type test report(Design Evalution Reports) as per IS:14724 and IS 10500 - * Test certificate No and date: - * Name and Address of laboratory which conducted Test: - * * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Jagdish Prasad 304804, GOVERNMENT P.G COLLEGE NH-12, CISF ROAD, DEOLI 1 15

battery cell Battery Cell ( 500 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Confirming to Indian Standard Heavy duty battery cell as per IS:9128 Heavy duty battery cell as per IS:9128 Type of batteries R06 R06 ISI marked Yes * CM/L No. 7294078 * No. of Cells per pack 10 10 CONSTRUCTIONAL Leak Proof Yes * FUNCTIONAL Nominal Voltage (Volts) 1.5 * CERTIFICATIONS Applicability of Test Reports from Central Govt./NABL/ILAC accrediated Lab covering all the declared parameters as per IS specification Yes * Test Report No. 146572 * Test Report Date 1/4/2017 * Name of the Lab GODREJ &BOYCE MFG LAB * 1/2 Address of the Lab MUMBAI * Secondary Cells and Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications Complusory Registration(CRS) of BIS for safety as per IS 16046 as applicable YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Suraj Sendram 481661, Office of the Field Director Kanha Tiger Reserve Mandla Madhya Pradesh 500 15

Executive Table

Rolling Pin, Board & Sets (Chakla, Belan, Chakla & Belan Set) Rolling Pin, Chakla & Belan Set) ( 1500 ) Technical Specifications Specification Specification Name Values Allowed Values Requirement Item Rolling Pin with Board set (Chakla & Belan Set) Rolling Pin (Belan), Board(Chakla), Rolling Pin with Board set (Chakla & Belan Set) Material Rolling Pin(Belan) Wooden Hard Wooden Hard, Wooden Soft, Stainless Steel, Plastic, Aluminium, NA Board(Chakla) Wooden Hard Wooden Hard, Granite, Stone, Marble, NA Shape, Design & Colour Board(Chakla) Leg type Integrated Leg With leg, Without leg, Integrated Leg, NA Board(Chakla) Shape Round Round, NA Colour Brown - Dimensions Rolling pin(Belan) Diameter 31-35 (mm) As per GeM Catalogue. Rolling pin(Belan) Overall Length 211-215 (mm) As per GeM Catalogue. Rolling pin(Belan) Contact Length 111-115 (mm) As per GeM Catalogue. Rolling pin(Belan) 61-65(mm) As per GeM Catalogue. 1/3 Handle Length Rolling Pin(Belan) Weight 91-110 (gm) As per GeM Catalogue. Board(Chakla) Diameter 221-230 mm As per GeM Catalogue. Board(Chakla) Thickness Without Leg 26-30 (mm) As per GeM Catalogue. Board(Chakla) Leg Thickness 16-20 (mm) 5-10 (mm), 11-15 (mm), 16-20 (mm), 21-25 (mm), 26-30 (mm), 31-35 (mm), 36-40 (mm), 41-45 (mm), 46-50 (mm), NA Board(Chakla) Weight 131-150 (gm) As per GeM Catalogue. Finish Rollin Pin(Belan) Smooth surface provide Yes - Board(Chakla) Smooth surface provide Yes - Polished on products Yes Yes, No Rolling pin(Belan) Knurling With With, Without, NA * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 1500 15

Desktops

Notebook Computers-laptop

brooms

detergent surfactant powder Detergent Surfactant Powder ( 70 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 4955 : latest - ISI Marking false CML Number 0 - Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes Yes Test Report Number 23632 - Test Report Date 25/06/2016 - Name of the Lab GODREJ LAB - Address of the Lab MUMBAI - Grade Grade Grade 2 Grade 1, Grade 2, Grade 3 Packing Quantity Per Pack (gms) 1000 1000, 1000.0 Type of Packing POLY PACK - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 uma shanker shrivastava 325220, ADMN. BUILDING, SHAKTI PARISAR, CTPP, MOTIPURA, TELSIL- CHHABRA, DISTT. BARAN, RAJASTHAN-325220 70 30

Professional Large Format Display

All in one Average Turn Over of Last 3 Years 8 Lakh (s) Experience with Gov. Required 3 Year (s) All In One ( 1 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Processor Processor Make Intel * Processor Generation 7th 7th Processor Intel Core i5-7600K (3.8 GHz, 6 MB Cache, 4 Cores) Intel Core i5-7600K (3.8 GHz, 4 Cores) Chipset Chipset On OEM Motherboard * Graphics Graphics type Dedicated/Discrete * Graphic Card Description Radeon Pro 580 with 8GB of VRAM * Storage Type of Hard disk drive Fusion SATA, SSD, Fusion Hard Disk Drive Size (GB) 2000 2000 (or higher) Hard disk drive speed (RPM) NA * RAM Type of RAM DDR4 * 1/4 RAM Size (GB) 32 32 RAM Expandability Upto (GB) 32 8, 16, 32, Not- Available Ram speed (MHz) 2400 * Operating System Operating system Mac OS High Sierra Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Mac OS * Display Display Size (Inch) 27 27 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) Retina 5K Display (5120 x 2880) with IPS Technology 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes * Ports USB Port 2.0 (No.) 0 * USB Port 3.0 (No.) 4 * VGA Port Not-Available * HDMI Port Not-Available * Thunderbolt Port (No.) 2 * Display Port Available * Input Devices Keyboard Standard with USB Interface * Mouse Optical Scroll with USB Interface * Audio Integrated Stereo Sound with internal speakers & Mic. * Connectivity Wi-fi Connectivity 802.11 ac * Bluetooth Connectivity 4.0 or higher * LAN Port Integrated Gigabit Ethernet 10/100/1000 * Certification BIS Registration under CRS of Meity Yes * BIS Registration no - * Certifications Available Energy Star * ROHS Compliance Yes * 2/4 Power Maximum Wattage (Watts) 230 * Power Efficiency (%) Minimum 80 * Others Webcam Full HD * DVD R/W Not-Available * Optical drive External * Stand Standard * On Site OEM Warranty (Year) 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bharat Lal Meena 110006, Old St Stephens College Building Kashmere Gate Delhi 1 15

hdpe tarpaulins in square mtrs Average Turn Over of Last 3 Years 10 Lakh (s) Hdpe Tarpaulins In Square Mtrs ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS: 7903: 2011: Latest - Certification BIS Marking No Yes, No CM/L No 7800024316 - Material Material High density polyethylene woven fabrics - Mass of Tarpaulin, gram per square meter (GSM) 250 250, 300, 350, 400, 450, 5 00 Laminating film on both sides of Tarpaulin Low density polyethylene (LDPE) - Thickness of Sandwitch Lamination ( In case two or more layers of HDPE Fabric are used ) (Micro Meter) (Minimum) 40 - Number of layers of HDPE Woven Fabric (Nos) 4 1, 2, 3, 4, 5 Thickness of laminating 40 - 1/3 film on the outer layer (Micro Meter)(Minimum) Line/cord beading diameter ( min ) 2.5 - UV Stabilisation UV stabliser UV stabliser, Carbon black Water Proofing Yes - Dimension Length 12 - Width 12 - Colour Colour as per buyer's requirements - Eyelets Eyelets Mettalic Mettalic, Plastic Size of eyelets Size 28 Of IS 4084 - Number of eyelets 8 - Hemming Hemming Heat sealing - Hemming width (Minimum) 40 - Other Requirement One square meter of Tarpaulin shall constitute as one unit for selling YES - Quantity supplied shall not exceed the quantity ordered YES - LOGO Logo/Totem As per buyer's requirements As per buyer's requirements, No Test Report Availability of Test Report from NABL ILAC accredited or Central Government Lab to prove conformity of products to the specification. true Name of the Lab THE SUPREME INDUSTRIES LIMITED, Address of The Lab MUMBAI - Test Report No SI231416 - Test Report Date 01/08/2017 - Test Report to be furnished to buyer on demand, if claimed to be available Yes - * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vinod Kumar 744101, Near Police Fire Headquarter Supply Line 20 30

hdpe tarpaulins in square mtrs Average Turn Over of Last 3 Years 1 Lakh (s) Hdpe Tarpaulins In Square Mtrs ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS: 7903: 2011: Latest - Certification BIS Marking No Yes, No CM/L No IS 14611 (1998) CONFORMING - Material Material High density polyethylene woven fabrics - Mass of Tarpaulin, gram per square meter (GSM) 250 250, 300, 350, 400, 450, 500 Laminating film on both sides of Tarpaulin Combination of Linear low density polyethylene (LLDPE) and LDPE - Thickness of Sandwitch Lamination ( In case two or more layers of HDPE Fabric are used ) (Micro Meter) (Minimum) 40 - Number of layers of HDPE Woven Fabric 3 1, 2, 3, 4, 5 1/3 (Nos) Thickness of laminating film on the outer layer (Micro Meter)(Minimum) 40 - Line/cord beading diameter ( min ) 2.5 - UV Stabilisation UV stabliser UV stabliser, Carbon black Water Proofing Yes - Dimension Length 30 - Width 30 - Colour Colour as per buyer's requirements - Eyelets Eyelets Plastic Mettalic, Plastic Size of eyelets Size 28 Of IS 4084 - Number of eyelets 6 - Hemming Hemming Heat sealing - Hemming width (Minimum) 40 - Other Requirement One square meter of Tarpaulin shall constitute as one unit for selling YES - Quantity supplied shall not exceed the quantity ordered YES - LOGO Logo/Totem As per buyer's requirements As per buyer's requirements, No Test Report Availability of Test Report from NABL ILAC accredited or Central Government Lab to prove conformity of products to the specification. false true, false Name of the Lab ON DEMAND - Address of The Lab ON DEMAND - Test Report No ON DEMAND - Test Report Date ON DEMAND - Test Report to be furnished to buyer on demand, if claimed to be available Not applicable - * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vinod Kumar 744101, Near Police Fire Headquarter Supply Line 15 25

diesel generators- DG Sets Average Turn Over of Last 3 Years 8 Lakh (s) Experience with Gov. Required 1 Year (s) Diesel Generators- DG Sets ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 5 5 (or higher) No of Phase - Single phase ENGINE Make of Engine - * Model Number of Engine - * Capacity of Engine (cc) - * Engine Power (kWm) - * ISI Marking to IS :10001 for engine false * BIS license No, if applicable - * Type of Engine cooling Air Cooled Air Cooled Type of governer Mechanical Mechanical, Electronic (or higher) Class of governer A2 A2 1/4 (or higher) Number of cylinders (nos) 1 * No of Strokes (nos) 4 * Rated RPM of Engine (RPM) - 3000 Overload capacity for one hour for every 11 hours continuous running at full load (%) 10 * Specific Fuel Consumption (gm/kWh) - * Starting voltage (volt) 12 * ALTERNATOR AC GENERATOR(ALTER NATOR) Make - * AC GENERATOR(ALTER NATOR) model Number - * Rating of AC Generator (KVA) 5 * Power Factor of AC generator 0.8 * Efficiency at rated Power factor at 75% of full Load 86 * Compliance of Alternator to IS:13364(part-1) Yes * Type of alternator Brushless * Voltage Regulation Grade VG 1 * Alternator IP Rating IP 23 * Class of Insulation H * CONTROL PANEL Control Panel Manual Manual IP Rating of Control Panel IP 53 * ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6 (or higher) Thickness of Foam 30 * Density of Foam for sound insulation 32 * Noise level at 1 meter (dB) 74 * BATTERY Battery Type & Specification Normal lead acid to IS: 7372 for motor vehicles * 2/4 Battery capacity (Ah) - * No of batteries 1 * TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory No * Test Report number and date(Engine) - * Name and address of laboratory(Engine) - * Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory No * Test Report number and date(Alternator) - * Name and address of laboratory(Alternator) - * DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes * WARRANTY INSTALLATION & COMMISSIONING Warranty 1 1.0, 2.0 Installation & Commissioning With Installation With Installation Agreed to STC of the Product Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Premjit Tripathy 762001, CDM & PHO Office, Near Medical Square, Phulbani, Kandhamal, Odisha 1 15

Notebook Computers-laptop Notebook Computers-laptop ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 8 th 8 th Processor Intel Core i5 8250U (1.6 GHz, 6 MB Cache, 4 cores) Intel Core i5 8250U (1.6 GHz, 4 cores) Graphics Graphics Type Dedicated/Discrete - Graphics Card Description 2GB NVIDIA® GeForce® MX130 - Graphics Memory (GB) 2GB NVIDIA® GeForce® MX130 - Memory Type of RAM DDR 4 - RAM Size (GB) 8 8 (or higher) RAM Expandable upto ( in GB) using spare DIMM Slot on Mother Board 8 8 RAM Speed (MHz) 2400 - Storage Type of Hard Disk Drive Fusion Fusion Hard Disk Drive Size( GB) 1000 1000.0 Higher is better 1/4 Hard Disk Drive Speed (rpm) 5400 - Operating System Operating System Windows 10 Home Windows 10 Home, Windows 10 Professional Ports USB 3.0 or higher (No.) 2 - USB Type C Available - VGA Port Not-Available - HDMI Port Available - DISPLAY PORT Not-Available - Thunderbolt Port 1 - Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 - Wi-fi Connectivity 802.11 a/b/g/n - Bluetooth 4.0 or higher - Display LCD LED Backlit Display Type Touch Touch Display Size (Inch) 14 14 (or higher) Display Resolution (Pixel) 1440 x 900 1440 x 900 Certification BIS Registration under CRS of Meity Yes - BIS Registration no. - - BEE/Energy Star Certification - - ROHS Compliance Yes - Additional feature Finger Print Reader No - Webcam (HD or Better) Available - Miscellaneous Optical Drive not available - Keyboard Backlit - Trusted Platform Module Enabled Yes - Weight (With Battery) (Kg) 1.63 - Carry Case Included Included Power Battery Type (Li-Ion/Li- Polymer) Built-in - Battery Back-up (Hours) 9 - Warranty Battery Warranty (Year) 1 1 (or higher) 2/4 On Site OEM Warranty (Year) 1 1 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Radhe Shyam Ekka 492001, ROOM NO. 501, 4th FLOOR, WHITE HOUSE, HEAD OFFICE MUNICIPAL CORPORATION, RAIPUR(C.G.) 2 15

Multifunction Machines

All in one All In One ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Processor Processor Make Intel * Processor Generation 7th 6th, 7th, 8th Processor Intel Core i7-7700T (2.9 GHz, 8 MB Cache, 4 Cores) * Chipset Chipset Intel H110 * Graphics Graphics type Integrated * Graphic Card Description AS PER COMPNY * Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 1000 500, 1000, 2000 (or higher) Hard disk drive speed (RPM) 7200 * RAM Type of RAM DDR4 * RAM Size (GB) 8 4, 8, 16, 32 RAM Expandability 32 8, 32, Not- 1/3 Upto (GB) Available Ram speed (MHz) 2400 * Operating System Operating system Windows 10 Professional Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows * Display Display Size (Inch) 23 18-27 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes * Ports USB Port 2.0 (No.) 2 * USB Port 3.0 (No.) 4 * VGA Port Available * HDMI Port Available * Thunderbolt Port (No.) Not-Available * Display Port Available * Input Devices Keyboard Standard with USB Interface * Mouse Optical Scroll with USB Interface * Audio Integrated Stereo Sound with internal speakers & Mic. * Connectivity Wi-fi Connectivity 802.11 ac * Bluetooth Connectivity 4.0 or higher * LAN Port Integrated Gigabit Ethernet 10/100/1000 * Certification BIS Registration under CRS of Meity Yes * BIS Registration no - * Certifications Available Energy Star * ROHS Compliance Yes * Power Maximum Wattage (Watts) 240 * 2/3 Power Efficiency (%) Minimum 80 * Others Webcam Full HD * DVD R/W Available * Optical drive Integrated * Stand Standard * On Site OEM Warranty (Year) 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Resham Singh Dhurve 480001, O/o Divisional Forest Office South Chhindwara 1 15

All in one Average Turn Over of Last 3 Years 40 Lakh (s) Experience with Gov. Required 10 Year (s) All In One ( 27 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Processor Processor Make Intel * Processor Generation 7th 7th Processor Intel Core i7-7700 (3.6 GHz, 8 MB Cache, 4 Cores) Intel Core i7-7700 (3.6 GHz, 4 Cores), Intel Core i7-7700T (2.9 GHz, 4 Cores) Chipset Chipset Intel H110 * Graphics Graphics type Integrated * Graphic Card Description Intel Graphics HD * Storage Type of Hard disk drive SATA SATA Hard Disk Drive Size (GB) 1000 1000 (or higher) Hard disk drive speed 7200 * 1/3 (RPM) RAM Type of RAM DDR4 * RAM Size (GB) 4 8, 4 RAM Expandability Upto (GB) 32 32 Ram speed (MHz) 2400 * Operating System Operating system Windows 10 Professional Windows 10 Professional OS Certification Windows * Display Display Size (Inch) 19.5 19.5, 20.0, 20 Type of Display Non Touch Non Touch display resolution (Pixels) 1600 x 900 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes * Ports USB Port 2.0 (No.) 2 * USB Port 3.0 (No.) 4 * VGA Port Not-Available * HDMI Port Available * Thunderbolt Port (No.) Not-Available * Display Port Not-Available * Input Devices Keyboard Standard with USB Interface * Mouse Optical Scroll with USB Interface * Audio Integrated Stereo Sound with internal speakers & Mic. * Connectivity Wi-fi Connectivity 802.11 ac * Bluetooth Connectivity 4.0 or higher * LAN Port Integrated Gigabit Ethernet 10/100/1000 * Certification BIS Registration under CRS of Meity Yes * BIS Registration no - * Certifications Available Energy Star * ROHS Compliance Yes * 2/3 Power Maximum Wattage (Watts) 120 * Power Efficiency (%) Minimum 80 * Others Webcam HD * DVD R/W Available * Optical drive Integrated * Stand Standard * On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sanjay Wasudeorao Thakare 444604, VMV Road, Near Kathora Naka, Amravati- 444604 27 15

fire fighting and hydraulic rescue platform Fire Fighting And Hydraulic Rescue Platform ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Fire Fighting and Hydraulic Rescue Platform The Hydraulic Platform shall be designed specifically for fire fighting and rescue work. The entire unit shall be mounted on a Turntable on a CMVR certified BS-IV compliant Chassis. The Truck Chassis complete with Company Built Cabin and PTO Unit are included under this equipment The Hydraulic Platform shall be designed specifically for fire fighting and rescue work. The entire unit shall be mounted on a Turntable on a CMVR certified BS-IV compliant Chassis. The Truck Chassis complete with Company Built Cabin and PTO Unit are included under this equipment Maximum Working Height from Ground level 32 22, 32, 42, 52, 62 Type of Fuel Diesel - Power Take Off (PTO Unit) Type TATA G 550 PTO - Main Boom Configuration na - Number of Booms 0 - Number of Telescopic Sections 0 - 1/13 Cage Capacity with Dry Monitor 700 700.0 Cage Capacity with Monitor delivering 3000 LPM 750 - Water Monitor capacity in (LPM) 4500 4500 Maximum Cage floor height from Ground level 22 - Maximum reach from Slew centre to Cage corner at full rated load 22 - Slewing (degrees plus endless, continuous in both directions) 360 360.0 Standard Sparewheel, Tool Kit, First Aid Kit YES - List of Standard Accessories provided YES - Optional Accessory - Portable Pump 1500 LPM @ approx 9 Bar false - Availability of Drawing and Service Manual YES - Transportation Charge in Rupees Per Km 32 - Outreach management as per manufacturer’s design shall be controlled automatically by Electro Hydraulic System Electro Hydraulic System Computer Override Mechanism for operations even in case of failure or malfunction of the Computer Aided safety system NA for 22-m NA for 22-m, Yes, the mechanism enables to override the electronic computerised controlled safety system and operate the machine with modified reach parameters, with alternative mechanical hydraulic/electric safety at full load and stability Constructional and Performance Make & Model No of Chassis TATA 1613 LPT - Emission Norms BSIV - 2/13 Chassis with Built up Cabin for Driver YES - Engine Power Max 2500 2500.0 Engine Torque Max 490Nm@1500rpm - Wheelbase 6200 - Drive 2-WD 2-WD Fuel Tank Capacity 250 - Overall Stowed Length 12 Overall Stowed Width 2.5 - Overall Stowed Height 4 - Overall Width (with all outriggers fully extended) 7.5 7.5 Overall Width (with one side jacking) 5.5 Static Stability of fully built up Unit on Chassis to incline of 15 - Turning Circle Radius 12 Gradeability (%) 22 - Maximum Speed (km/hr) 110 - Front overhang of the Built Up Unit 1 - Rear overhang of the Built Up Unit (in % of wheelbase) 60 - Overall Weight of Built Up Unit shall not exceed Chassis GVW YES YES Maximum penetration of outrigger base plate below firm horizontal ground suitable to level vehicle on incline of 7 - Spirit level indicator provided Yes - Cage Dimensions Outer +/- 5% approx 1045x2050x1150 (LxWxH) (in mm) 1945x2050x1150 - Independent Cage Slewing (left and right) 45 - 3/13 Mounting of Cage for Up and Down movement Direct Attachment - The cage must be horizontal in all operating positions through an electronically (or hydraulic) controlled levelling mechanism Yes - Additional switch/lever control shall be provided in the cage to allow operator to adjust the cage level Yes - Water Monitor Type Water cum Foam - Water spray curtain system for protection from radiant heat Yes - Boom shall be Box-type section made of corrosion resistant high strength steel grade FE540 to IS 2062 reaffirmed 2000/ST55 to IS 961 or Superior Yes - Welding Process for fabrication work FIRE FABRICATION In operating position, the Unit shall be stabilized on 4 nos H-type (hydraulic out and down type) outriggers Yes, outriggers having sufficient power and stroke to lift all wheels of the vehicle off firm level ground Yes, outriggers having sufficient power and stroke to lift all wheels of the vehicle off firm level ground Operating Position - Option 1 All 4 outriggers are extended fully horizontally: Slew through full circle permitted, unlimited, endless, continuous All 4 outriggers are extended fully horizontally: Slew through full circle permitted, continuous Operating Position - Option 2 Outriggers on left side extended horizontally fully but not fully on right side of vehicle: Slew permitted on left side only Outriggers on left side extended horizontally fully but not fully on right side of vehicle: Slew permitted on left side only Operating Position - Option 3 Outriggers on right side extended horizontally fully but not fully on left side of vehicle: Slew permitted on right Outriggers on right side extended horizontally fully but not fully on left side of vehicle: Slew permitted on right 4/13 side only side only Outreach management as per Manufacturers design shall be controlled automatically by a combination of electrical, mechanical and/or hydraulic safety systems YES - There shall be an on- board computer system, which receives geometric information through redundant (dual information) sensors NA for 22-m - Digital cage load display, with alarm and cut-off indicating overload, irrespective of reach, height or position of the hydraulic platform with 20% overload allowance (ie load in cage not to exceed 600kgs) YES - Electro-hydraulic proportional joysticks for controlled and simultaneous movements of booms and slew shall be provided YES - Automatic stops to prevent platforms from reaching unsafe area of operation shall be provided YES - The equipment shall be powered by a double hydraulic pump powered by the vehicle engine through PTO unit YES - When one of the booms or slew movement is operated, the control valve shall automatically increase the pressure and oil flow to the extent needed for the Yes, and when hydraulic platform is not in operation, the pump shall operate on minimum flow and minimum pressure - 5/13 movement activated The main platform control levers shall allow for a progressive control at infinite variable speed from creep to maximum and proportional to the joystick lever position YES - The system shall be equipped with an inbuilt provision to provide smooth start or stop controls for relatively jerkfree operation, providing automatically for a progressive acceleration or deceleration of the main platform movements YES - All controls shall be of 'Deadman' type and return automatically to neutral position, stopping the motion if the control is abandoned YES - Deadman Switch type Integrated in Joystick - 3 sets of displays (at outrigger, turntable and cage control stations) on backlit colour monitors of at least 14cm size, which shall dynamically display information about NA for 22-m - Minimum inner diameter of the telescopic waterway made of stainless steel aluminium 75 - There shall be a 63mm inlet with closing valves on the rear of the vehicle, from where the line leads through the centre post, turntable and upto the water monitor in cage YES - The piping shall be YES - 6/13 simultaneously protected from possible over pressure by means of relief valve mounted underneath the turntable Moving sections of the water pipe shall be thoroughly ground and chromium plated anodized YES - An additional outlet with 63mm closing valve and coupling for water supply from the cage shall be provided for extension hoses YES - There shall be a drain cock fitted in the pipe to enable it to drain the water after use YES - An inter- communication system shall be fitted between the turn-table and the cage YES - There shall be an electric siren unit with hooter fitted on the roof of the vehicle cab Yes, Control panel of the system is located in the driver’s cab with switches for the fast (Yelp) and slow (wail) sounds - Command microphone with push to talk switch shall allow the public address message to override the siren function YES - Compressed breathing air supply from turntable to the cage shall be provided through a four way manifold at the cage along with four breathing air masks at cage Yes, 4 nos. 6 litres 300 bar air cylinders is provided at the turntable - It must be possible to change the cylinders without interrupting the air supply; pressure regulator shall also be incorporated in the YES - 7/13 system Electric supply shall be taken from the chassis battery, which shall be charged when the engine is running 12 - The Telescopic Rescue Ladder System Shall be provided attached on to main boom structure at several points throughout its length and front end in the telescopic sections that shall allow direct continuous rescue way with cross or no cross over platform or similar obstacle - Telescopic Rescue Ladder System - Distance between each rung 280 - Each rung of the ladder shall be able to support load without any permanent distortion 300 - Spot Light at Cage railing and at Rear of body shall be provided 2 - Rotating Beacons: Two rotating blue beacon lights, one on each side of the driver cab roof shall be provided YES - Painting : All surfaces of steel structure and hollow structures shall be chemically mechanically cleaned for rust removal, after which they shall be primed All booms shall be painted from inside also Yes, paint shades shall be provided as specified by the customer - Storage lockers shall be sufficient for all equipments which are required to be carried on the appliance including as below: YES - Flexible rubber suction hoses of 100 mm dia each and 3 m length 4 nos. - 8/13 Canvas delivery hoses of 63mm dia and each of 15 m unfolded length 2 nos. - Metal outrigger ground plates with brackets 4 Nos - Portable oil pressure gauge attached to 1 m long hydraulic hose 1 no. - Drop down Stretcher carrier of 180 Kgs capacity for injured persons to be rescued 1 no. - Working range diagram, one at the turn-table, and one in the working cage, hard copy 2 nos. - Plug for 12/24 volts working light at the turn-table and in the cage 1 no. each - Lifting hook under the working cage 500 kg capacity YES - Anchorage points for safety harnesses for 4 persons in the cage YES - Safety and Inspection Parameters The Hydraulic Platform shall comply with the Safety requirements and features as per EN1777 norms and other national international norms & standard YES YES Test Load for Stability at full outreach 750 Max Safe Operating Wind Speed at Max Height/Reach and Rated Cage Load ( in m/sec) 12.6 - Electronic Auto- Leveling of Vehicle Yes, through single push button to level Vehicle upto an accuracy of 0.5 degrees, operation not allowed if vehicle is not - 9/13 in level position Automatic Slew Restriction, depending on outrigger position Yes, it shall automatically prohibit the slew movement on the side where the outriggers have not been fully extended - Interlock to prevent boom operation, unless outriggers are deployed and vehicle levelled YES - Interlock to prevent outrigger movement unless the Platform is fully stowed YES - Cage collision guard with automatic cut-off and possibility to over- ride the cut-off as decided by operator in cage YES - Display of cage load and alarm if load is exceed and automatic cut-off YES - Indication in driver’s cabin for PTO, locker open, outrigger stowed position so that driver knows that it is safe to drive after completion of all operations Yes, visible only when PTO lever is engaged - Automatic cut-off and alarm in case any outrigger loses contact with ground YES - Static Stability of the equipment, duly mounted on the chassis, in transport position, shall be stable upto 15 degree incline or higher YES - Test to verify if the outriggers are designed to level the vehicle on slope of 7 degree in both longitudinal and transverse directions Yes, the level shall be measured with a digital inclinometer and the error in leveling shall not exceed 0.5 degree Yes, the level shall be measured with a digital inclinometer and the error in leveling shall not exceed 0.5 degree 10/13 Pressure overload protection for hydraulic pumps through pressure relief valve in main control valve shall be provided YES - All cylinders shall be provided with load holding valves to prevent boom crash in case of hose failure YES - Restrictor valves for slow descent in the event of lock valve failure YES - Emergency cut off device at turntable and at the cage to cut off all functions, with easy restoration YES - Emergency backup system with auxilliary hydraulic pump for stowing the equipment in case of Main pump, PTO or vehicle engine failure Engine Driven Engine Driven, Battery Driven, Both Engine and Battery driven Certifications, Self Declaration and Test Reports ARAI/VRDE/ICAT No of the Chassis for compliance to CMVR '1989 and any amendments NA - Form 22 A - For compliance with pollution standards, safety standards of components and road worthiness as per CMVR Rules NA - Fire fighting and hydraulic rescue platform certification from ARAI/VRDE/ICAT as a complete product including chasises (Indian/Imported) YES - ARAI/VRDE/ICAT certification number - - ARAI/VRDE/ICAT certification date - - Spares and Service YES - 11/13 support shall be available locally for minimum 7 years by its OEM or authorised Dealer Certification of complete system for Safety requirements and features as per EN1777 norms and other national international norms & standards CE418F254 - Inspection Report Test Certificate from any Govt organization in India verifying the safety systems as listed in the Safety and Inspection Parameter section shall be provided YES YES Test Reports from Central Govt/NABL ILAC acredited lab for Mechnical Test (as per ASTM A 370:2014 or IS 1608:2005) and Chemical Analysis (as per ASTM E 415:2014) confirming to ST55 to IS916 or similar Indian Standard YES YES Test Reports from Central Govt/NABL ILAC acredited lab for Welding Quality YES YES Manufacturer shall provide Test Certificates for safety systems which require dismantling reassembly YES - Manufacturer's Test Certificates for various bought out items components shall be provided YES - Warranty Time (in years) 3 3, 5 12/13 Number of Free Service 3 - Training and Commissioning at site YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pradeep Kumar Ahirwar 473331, NAGAR PALIKA PARISHAD ASHOKNAGAR 1 15

Desktops

Desktops

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 20 Lakh (s) Experience with Gov. Required 3 Year (s) OEM Cartridge/Consumable ( 150 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Canon - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number CRG 326 - Corresponding Part number/code 3483B003AA - Printer Model number/numbers for which Cartridge is suitable LBP6230dn - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2100 - * Bold specifications are the golden parameters. 1/2 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bharat Lal Meena 110006, Old St Stephens College Building Kashmere Gate Delhi 150 15

almirah- Steel Almirah- Steel ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest true - No of shelves (Nos) 4 - Type of Shelves Fixed - Locker Provided false - Locking System with the locker NA - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 3 - Number of Glass Sheet fixed in each Almirah door (Nos) N.A - Construction Welded - Lock Three Way bolting device controlled by lock - MATERIAL Material M.S sheet conforming M.S sheet conforming 1/3 to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker N.A - Length of Glass Sheet ±10 (mm) N.A - Width of Glass Sheet ±10 (mm) N.A - Sheet Thickness of door in mm 1.0 mm - Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) - Sheet Thickness of Shelves 0.8 mm - Sheet Thickness of Pedestal in mm 0.8 mm (Minimum) - Material of Lock Brass and steel finish - Material of Keys steel - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1855 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 480 430, 455, 480, 486, 270, 370, 400 Inside Height of Locker in mm (± 5 mm) N.A - Inside Width of Locker i mm (±5 mm) N.A - Inside Depth of Locker in mm (±5 mm) N.A - 2/3 Width of Stiffner in mm (±5 mm) 115 mm - Thickness of MS Sheet of Stiffner (in mm) 0.9 mm - Stiffened Pedestal height in mm (±2 mm) 125 - Pedestal Width in mm (±2 mm) 75 - COLOUR & FINISH Finish Synthetic enamel - Colour of Paint ash gray - Packing: Gutta Packing - CERTIFICATION ISI marked false - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 2 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dattatray Shendage 411006, MHADA Commercial Complex II floor Opp Tridal Nagar Yerwada Pune 2 15

Foolscap sheets Foolscap Sheets ( 1000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Type Description (size) of Paper FOOLSCAP FOOLSCAP Dimension and Weight Dimension of the Paper (W X L) (mm X mm) 215 X 342 215 X 342 GSM (GSM) 80 80, 80.0 (or higher) Physical Characteristics Brightness (%) 80 80-95 Tensile Index MD (Nm/g) 40 * Tensile Index CD (Nm/g) 27 * Opacity (%) 85 * Tear Index (Avg) (Nm.m2/g) 4.5 * Smoothness for both sides (Bendtsen) (ml/min) 155 * Thickness (um) 95 * 1/2 Moisture (%) 4 * Stiffness MD 2 * Stiffness CD 1 * Surface Strength Dennison (Wax Pick) N>= 12A 12A * Test Method as per IS: 1060 Yes * Packing Number of Sheets per Ream (Nos) 500 Sheet * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sudhir Kumar Dubey 480001, Chnadan Gaon, MPPKVVCl Chhindwara 1000 15

almirah- Steel Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 3 Year (s) Almirah- Steel ( 7 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest false * No of shelves (Nos) 4 * Type of Shelves Fixed * Locker Provided false * Locking System with the locker NA * Cloth hanging provision in the Almirah false * Number of Doors (Nos) 2 * Door Stiffner upto full door height Provided with the almirah doors true * Number of Hinges with each door (Nos) 3 * Number of Glass Sheet fixed in each Almirah N.A * 1/4 door (Nos) Construction Welded * Lock Three Way bolting device controlled by lock * MATERIAL Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet Sheet Thickness of Locker N.A * Length of Glass Sheet ±10 (mm) N.A * Width of Glass Sheet ±10 (mm) N.A * Sheet Thickness of door in mm 0.7 mm minimum (Not as per IS 3312) * Sheet Thickness of sides, back, Top and Bottom 0.7 mm minimum (Not as per IS 3312) * Sheet Thickness of Shelves 0.7 mm * Sheet Thickness of Pedestal in mm 0.7 mm * Material of Lock Brass and steel finish * Material of Keys brass and steel finish * DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 2000 2000 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 480 430, 455, 480, 486, 270, 370, 400 Inside Height of Locker in mm (± 5 mm) N.A * Inside Width of Locker i mm (±5 mm) N.A * Inside Depth of Locker N.A * 2/4 in mm (±5 mm) Width of Stiffner in mm (±5 mm) N.A * Thickness of MS Sheet of Stiffner (in mm) N.A * Stiffened Pedestal height in mm (±2 mm) 120 * Pedestal Width in mm (±2 mm) 75 * COLOUR & FINISH Finish Synthetic enamel * Colour of Paint ash gray * Packing: Bubble Sheet * CERTIFICATION ISI marked true * WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Narendra Kumar Rai 313332, Deogarh Road Amet 7 15

Air Conditioner

hopper or tipper Hopper Or Tipper ( 6 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Garbage Tipper Type of TIPPER if other tipper, please declare type of Tipper, * Main Engine Capacity (cc) 702 * Make of Chassis - * Type of Chassis Frame - * Category of Vehicle for which Chassis to be used Medium Capacity Commercial Vehicles Medium Capacity Commercial Vehicles Type of Chasssis Chassis without facecowl * Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 20 20 1/5 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 65 * Max Engine Power BHP (BHP@rpm) 16 Any applicable numeric value Max Engine Torque (N-M@rpm) 2000 Any applicable numeric value Main Engine Aspiration Natural Aspiration Natural Aspiration No. of Cylinder in Main Engine (Nos) 2 2 Fuel Tank Capacity (Ltrs) 30 30.0 Gradeability of Vehicle with load( %) 21 * Gradeability of Vehicle without load ( %) 39 * Ground Clearance (mm) 4190 4190.0 Wheel Base (mm) 2100 * Kerb Weight (Kg) 840 840.0 Gross Vehicle Weight (Kg) 1550 1550.0 No of Axle (Nos) 1 * Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - * Type of Front Axle and Suspension System - * Type of Rear Axle and Suspension System - * Type of BIS MARKED Vehicle Tyre Tube * Chassis Transmission System Automatic Automatic Number of Speed Forward Gears 65 * Type of Steering Manual Manual Turning Radius, Min (mm) 180 180.0 Speed Governers yes * ABS Fitted yes * Front Vehicle Brake - * 2/5 Rear Vehicle Brake - * Type of Clutch - * Tipping Angle (Degree) 48 48 Tipper Container cap acity/Volume(cubic metres) 2 0.5-10.5 Certification Chassis Certification ARAI/VRDE/ICAT No. - * Performance Parameters Standard Sparewheel and Tool Kit Yes * Warranty Time (Month) 12 * No. Of Free Service (Nos) 2 * Battery Warranty (Months) 12 * Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 * Width of Chassis (mm) 1500 * Height of Chassis (mm) 1845 * Size Of Front Tyres (mm) - * Size Of Rear Tyres (mm) - * Size of Wheel (mm) 2100 2100.0 Tipper body Pivot length (mm) 1546 * Tipper body Length (mm) 2165 * Tipper Body Height (mm) 670 * Overall Height of Tipper from Ground (mm) 1489 * Body Plate Thickness (mm) 2 1.5-9999999 Main Frame Thickness (mm) 2 Any applicable numeric value Pneumatic System false * Hydarulic System true * Tipping Hydraulic Cylinders(Make) - * 3/5 Hydraulic System Driven by Main Engine * Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false * If Yes Auxiliary Diesel Power (HP@rpm) 0 Any applicable numeric value Auxiliary Diesel Engine Transmission - * Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 Any applicable numeric value No. of Cylinders in Auxiliary Diesel Engine 1 * Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Any applicable numeric value Dumping Height (mm) 352 Any applicable numeric value Engine Oil Pressure Level Indicator in Control Panel false * Fuel Gauge Indicator in Control Panel false * Engine Cooling Liquid Temperature Indicator in Control Panel false * Operating Hour Meter false * Locking/Unlocking of Tipper Discharge Container Yes * Lowering/Lifting of Tipper Discharge Container Yes * Counter Weight false * If yes Counter Weight (kg) 0 * Paint Automotive Paint * * Bold specifications are the golden parameters. Consignees and Quantity 4/5 S.No. Consignee Address Quantity Delivery Days 1 Santhosh Verma 451666, New Nagar Palika Near Karuna Hospital Dasera maidan Sendhwa(M.P.) 6 15

Professional Large Format Display

Printer or photo Copier Paper Printer Or Photo Copier Paper ( 2500 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes * Test Method as per IS: 1060 Yes * Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297, 297 X 420 Size of the Paper A4 A4 GSM of Paper 80 80 Quantity Number of Sheets per Ream 500 500, 500.0 (or higher) Physical Characteristics Brightness in % 85 80-95 Tensile Index MD in Nm/g 50 * Tensile Index CD in Nm/g 35 * Opacity in % 90 * Tear Index (Avg) in 4.5 * 1/2 Nm.m²/g Smoothness for both sides (Bendtsen) in ml/min 200 * Thickness in µm 100 * Moisture in % 4.5 * Stiffness MD 3 * Stiffness CD 2 * Surface Strength Dennison (Wax Pick) >= 12 A 12A * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chandra Sahu 482008, O/o EE (Area Store), Nayagaon, Rampur, MPPKVVCL, Jabalpur, 2500 15

revolving chair Average Turn Over of Last 3 Years .23 Lakh (s) Experience with Gov. Required 3 Year (s) Revolving Chair ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Chair Type 360 Degree swivel, posture control with multilocking position synchronized mechanism 360 Degree swivel, posture control with multilocking position synchronized mechanism Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With Type of backrest support backrest symmetrical lumber support backrest symmetrical lumber support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true Back type fixed push back, 1/4 height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking 3-Position Locking * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Arm Material pu foam bonded chrome coted pu foam bonded chrome coted seat material PU Foam Covered With pure leatherite PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 * Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite leatherite GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram * DIMENSION Overall Chair Height 1180 * 2/4 ±15mm Backrest Height ±15mm 650 * Backrest Width ±10mm 550 * Seat Height ±15 mm 500 500 Seat Width ±10 mm 550 550 Seat Depth ±10 mm 550 550.0 Thickness of M S Plate Joining the under structure with Seat 2 * Thickness of Plywood used in Seat ±1(mm) 15 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 15 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 70 70 Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 70 70 WARANTEE Warrantee period in number of years 2-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES BIFMA Certification YES YES OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification NO YES, NO Aiota - YES, NO 3/4 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Narendra Kumar Rai 313332, Deogarh Road Amet 1 15

Multimedia Projectors

Printer

Multifunction Machines

hopper or tipper Average Turn Over of Last 3 Years 200 Lakh (s) Experience with Gov. Required 5 Year (s) Hopper Or Tipper ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/6 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 Speed, Max (Km/Hr) 60 - Max Engine Power BHP (BHP@rpm) 3200 Max Engine Torque (N-M@rpm) 2000 Main Engine Aspiration Natural Aspiration Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - 2/6 Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 85 Tipper Container cap acity/Volume(cubic metres) 1.9 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 304.8 Tipper body Pivot length (mm) 0 - Tipper body Length (mm) 2240 - Tipper Body Height (mm) 735 - Overall Height of Tipper from Ground (mm) 1518 - Body Plate Thickness 2 3/6 (mm) Main Frame Thickness (mm) 3 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) 0 Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 1012 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - 4/6 Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mayur Ashokrao Girulkar 445206, Municipal Council Umarkhed 10 15

high performance power supplies High Performance Power Supplies ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Power Supply Type DC AC, DC, AC + DC, Benchtop DC Number Of Outputs 3 1, 2, 3 Output Voltage Dual Value * Output Current Dual Value * Warranty (Year) >/=1 Year * CONSTRUCTIONAL Dimensions (in mm) 1700(H)X525(W)X525( B) * Input and Output Interfaces USB * Accessories to be Supplied ANDERSON CONNECTOR * Weight (Kg) 140 * FUNCTIONAL Line Regulation ( in percentage ) +-1 * Input for Power Supply 415V, 6% TO +10% * Display and Control Features LCD WITH METALLIC KEY PAD * Multiple Steps to cover Yes * 1/4 the voltage and Current Ranges Output Ripple and Noise and Maximum ( in mV rms) +-1 * Total Harmonic Distortion (THD) 0 * Operating Temperature Range (Degree Celcius ) 0 TO 50 * Meter Vrms, Irms, Ipeak, Vpeak, frequency, power * Protection Over load, Short circuit, OV, UV, OT * Efficiency ( in percentage) 92 * Programmable Output Frequency Minimum (in Hz) 47 * Programmable Output Frequency Resolution ( in Hz) 0.2 * Power Factor 0.99 * Transient Response (in microSec) 3000000 * Operating Humidity Range ( in percentage) >95 * Load Regulation ( in percentage ) +-1 * AC Setup Resolution for AC Power Supply (Current) ( in mA) NA * Programmable Output Frequency Maximum ( in Hz) NA * Output Current Range For AC Power Supply ( in A) NA * Accuracy for AC Power Supply (Voltage) NA * Readback Resolution for AC Power Supply (Voltage) (in mV) NA * Output Voltage Range For AC Power Supply ( in V) NA * 2/4 Number of Output Phase for AC Power Supply Three Phase Single Phase, Three Phase, Both Single and three Phase, NA Readback Accuracy for AC Power Supply (Current) NA * Setup Resolution for AC Power Supply (Voltage) ( in mV) NA * AC Output Power ( in VA) NA * Readback Resolution for AC Power Supply Current (in mA) NA * Accuracy for AC Power Supply Current NA * Waveshape of Output NA * Readback Accuracy for AC Power Supply (Voltage) NA * DC Readback Accuracy for DC Power Supply (Current) +-1 * Readback Accuracy for DC Power Supply (Voltage) +-1 * Output Current Range For DC Power Supply ( in A) 0 TO 100 * Readback Resolution for DC Power Supply and Current (in mA) NA * Setup Resolution for DC Power Supply (Current) (in mA) NA * DC Output Power ( in Watt) 10000 TO 20000 * Readback Resolution for DC Power Supply (Voltage) ( in mV) NA * Output Voltage Range For DC Power Supply ( in V) 0 TO 100 * Ac acuracy for DC Power Supply Voltage NA * Setup Resolution for DC Power Supply Voltage( in mV) NA * 3/4 Accuracy for DC Power Supply Current NA * CERTIFICATIONS Availability of Type tests reports from Central Government lab OR ILAC or their worldwide affiliated recognised labs OR NABL approved lab showing confirmity to the specifications Yes * Certificates SAFETY, EMI, IP * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bharti N 494449, Opposite to collectrate dantewada 2 15

Special Purpose Telephones(smart phone for ICDS) Average Turn Over of Last 3 Years 100 Lakh (s) Experience with Gov. Required 2 Year (s) Special Purpose Telephones(smart Phone For ICDS) ( 1598 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Processor Quad Core Processor - Processor speed >/= 1.3 GHz - Screen size (in inches) >/= 5 inch - Device RAM size >/= 2GB - Internal storage >/= 16GB - Operating system Android Operating System Version 7.0 Neuget or above - Availability: Available State/UT wide Yes - Special check for availability in remote deployment Yes - DISPLAY Screen Resolution (800X480) minimum Yes - Display Type (TFT capacitive Touch Screen (24 bit/16 point 7 million colour or better) Yes - Multi touch Yes - 1/5 Screen and mobile protection: Corning Gorilla or equivalent scratch proof glass with scratch proof covers coating Yes - Ruggedized: Device should handle minor bumps without the screen breaking Yes - BATTERY Battery capacity >/=2800 mAh - Expected battery life that can last an entire work day Yes - Stand by time >/= 5 days - Talk time >/= 16 hours - FEATURES Micro SD memory slot Yes - Memory Card Size (GB) >/=32 GB SD card >/=32 GB SD card SIM Card compatible Yes - CAMERA Camera Resolution (Mega pixel) >/= 5 Megapixel - Geo Tag Supported Camera Yes - CONNECTIVITY Micro USB Connectivity Yes - Connectivity Support 2G, 3G, 4G, Wi-Fi, Wi-Fi Direct Connectivity - Availability of USB OTG functionality Yes - Bluetooth Connectivity Yes - Location capture: Supports both standalone GPS and AGPS Yes - Speaker: Hands-free speaker with adjustable loudspeaker volume (preferably 60 dB or above) with good quality (noise/crosstalk) Yes - FILE FORMAT File Format Support for Recording: Image: JPEG, PNG Audio: mp3, Video: 3gp Yes - File Format Support for Playing: Image: JPEG, PNG, Audio: MP3, Should play audio with Yes - 2/5 no quality issues, Video: 3gp, Should be able to play HD videos ACCESSORIES Battery charger Yes - Headset Yes - Data cable Yes - Dust proof pouch Yes - Rugged mobile case to tackle minor bumps Yes - Screen protector that improves visibility of the screen in bright daylight Yes - Audio headset jack with headphones included (AV 3.5 mm Phone port) Yes - WARRANTY Device Warranty (Year) 2 Years - Battery Warranty (Year) 2 Years - SOFTWARE/APPLICATIO N Unicode: Supports unicode for languages script rendering in fonts for English and all regional languages of India Yes - Devices will be pre- loaded with application Software (ICDS-CAS) Yes - CERTIFICATION BIS Registration( under compulsory registration as per gazette notification S.O. 2905(E) dated 13th Nov, 2014) Yes - Availability of the test report from Central Govt./NABL approved ILAC acredited lab to prove compliance to technical specification Yes - OEM certificate covering all Parameters shall be furnished Yes - All the test reports and certificates shall be provided to Buyer/Consignee on demand Yes - 3/5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Zoramthangi Chhangte 796012, H.No.Y/A-46, Chaltla ng Dawrkawn, Near Greenland Higher Secondery School, Aizawl, Mizoram. 1598 15

domestic pressure cookers Domestic Pressure Cookers ( 500 ) Technical Specifications Specification Specification Name Values Allowed Values specification Conformity to Indian Standard IS:2347 latest Yes - ISI Marked false - CM/L No 1590032 - Material Material of Body, lid, Container and Grid Aluminium alloy conforming to IS: 21 Aluminium alloy conforming to IS: 21, Stainless Steel conforming to Designation X04Cr19Ni9 of IS:5522, Stainless Steel conforming to Designation X07Cr18Ni9 of IS:5522 Design Shape With Dimentions Round Round, U shape, oval Construction Workmanship and Finish NA Fully hard anodized, Partially hard anodized, NA Stainless Steel Pressure Cooker with Composite Bottom false true, false Type of Composite Bottom NA Cladded with minimum 0.5 mm thick Copper Sheet, 1/3 Electrodeposited with Copper of minimum 0.5 mm thickness, NA Internal Grid false true, false Capacity Capacity (Litres) 30 30 Test Report Availability of Test Reports from Central Govt./State Govt/NABL/IL AC accredited Lab covering all the Declared Parameters as per IS Specification false - Test Report No NA - Test Report Date NA - Name of the Lab NA - Address of the Lab NA - Reports to be furnish on demand by Buyer false - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 500 15

keyboards

Kadhai

All in one All In One ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Processor Processor Make Intel * Processor Generation 7th 6th, 7th, 8th Processor Intel Core i5-7400 (3.0 GHz, 6 MB Cache, 4 Cores) * Chipset Chipset Intel B250 * Graphics Graphics type Integrated * Graphic Card Description INTEL HD Graphics 630 * Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 500 500, 1000, 2000 (or higher) Hard disk drive speed (RPM) 7200 * RAM Type of RAM DDR4 * RAM Size (GB) 4 4, 8, 16, 32 1/3 RAM Expandability Upto (GB) 32 8, 32, Not- Available Ram speed (MHz) 2400 * Operating System Operating system Windows 10 Professional Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows * Display Display Size (Inch) 21.5 18-27 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes * Ports USB Port 2.0 (No.) 0 * USB Port 3.0 (No.) 6 * VGA Port Not-Available * HDMI Port Not-Available * Thunderbolt Port (No.) Not-Available * Display Port Available * Input Devices Keyboard Standard with USB Interface * Mouse Optical Scroll with USB Interface * Audio Integrated Stereo Sound with internal speakers & Mic. * Connectivity Wi-fi Connectivity 802.11 ac * Bluetooth Connectivity 4.0 or higher * LAN Port Integrated Gigabit Ethernet 10/100/1000 * Certification BIS Registration under CRS of Meity Yes * BIS Registration no - * Certifications Available BEE * ROHS Compliance Yes * Power Maximum Wattage 150 * 2/3 (Watts) Power Efficiency (%) Minimum 80 * Others Webcam HD * DVD R/W Available * Optical drive Integrated * Stand Standard * On Site OEM Warranty (Year) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhimrao Rathod 445001, Arni Road Yavatmal 1 15

Class Room Desking and Seating Class Room Desking And Seating ( 150 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING ONLY TABLE/DESK ONLY DESKS Desking Configuration SINGLE SEATER SINGLE SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 600 600 DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18 mm thick prelaminated Particle Board * Material of Support Structure or Side Pannel Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm Height of Desk Top in mm (±5 mm) 750 730 mm Width of Desk Top in mm (± 5 mm) 450 435 mm SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm 18 mm thick prelaminated Particle Board 18 mm thick prelaminated Particle Board 1/3 (For back rest +/- 4 mm) Material of Support Structure Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm Material of Seat Cushion WITHOUT CUSHION WITHOUT CUSHION Width of Seating in mm (±10 mm) ONLY DESK NO SEATING ONLY DESK NO SEATING Height of Seat in mm (±10 mm) ONLY DESK NO SEATING ONLY DESK NO SEATING Width of backrest if provided in mm (± 5 mm) No Backrest * Back Support for Seating of Same materail as Seating Provided without cushion Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) Can be configured as per buyer's choice within offered technical details * Colour of finish brown * Desk top finishing Two long sides to be post form half round profile and other two sides edge banded with CP Teak Wood Lipping * Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) NA * WARRANTY Warranty period in number of years 1 1 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jagdish Prasad 304804, GOVERNMENT P.G COLLEGE NH-12, CISF ROAD, DEOLI 150 15

stainless steel bucket Stainless Steel Bucket ( 1010 ) Technical Specifications Specification Specification Name Values Allowed Values Conformity Conformity to Specification As per IS : 4768 latest - Test Report Details Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification No Yes, No Test Report Number and Date ( Not a part of biddable parameter) NO - Name and Address of the Lab NA - Material Material of Buckets Stainless Steel Sheets Grade designation X04Cr19Ni.9 of IS: 5522 latest Stainless Steel Sheets Grade designation X04Cr19Ni.9 of IS: 5522 latest, Stainless Steel Sheets Grade designation X07Cr18Ni.9 of IS: 5522 latest Capacity Nominal Capacity (litre) 6 6, 6.0 Physical Characteristics Height (Nominal Size) of Buckets (mm) 215 215, 300, 325 1/2 Lid With Lid With Lid, Without Lid Sheet Thickness (mm) As per Specification IS : 4768 latest - Shape/Design and Dimension As per IS : 4768 latest - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 1010 15

classroom chairs Classroom Chairs ( 150 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Chair Type Without Arms Without Arms, One Arm with fixed Writing pad on one side other side open, Fixed writing pad on one side and Arm on other side, Foldable Writing pad on One side and Arm on other side, Foldabe Writing Pad on One side with other side open Type of Seat and Backrest 18 mm thick prelaminated Particle Board * Depth of Seat in mm (+/- 10 mm) 400 * Height of Seat in mm (+/- 10 mm) 460 * Width of Seat in mm (+/- 10 mm) 400 * Overall Chair Height in mm (+/- 10 mm) 850 * 1/3 SEAT DETAILS Thickness of Cushion Used in Seat in mm (+/- 2 mm) No Cushion * Density of Cushion Used in Seat (Kg/Cubic Metre) No Cushion * Material of Fabric of Seat Cover No Cusihion No Cover * BACKREST DETAILS Density of Cusion Used in Backrest (Kg/Cubic Metre) No Cushion * Thickness of Cushion in Backrest in mm (+/- 2 mm) No Cushion * Material of Fabric of Backrest Cover No ciushion no cover * Width of Backrest (mm) 400 * Height of Backrest (mm) 300 * SUPPORT/UNDER STRUCTURE Frame Material Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum * Under Storage provided below the Seat NO * Material of under storage NA * Length of Under Storage (mm) NA * Width of Under Storage (mm) NA * DEPTH of Under Storage (mm) NA * WRITING PAD DETAILS Writing Pad Material N.A * MISC Colour of Fabric for Seat and Backrest No Fabric * Finishing of Structure Stove enameled Paint * WARRANTY Warranty period in number of years 2 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand NO * Product having BIFMA certification NO YES, NO OEM of offered product is ISO YES YES, NO 2/3 9001:2015 certified OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jagdish Prasad 304804, GOVERNMENT P.G COLLEGE NH-12, CISF ROAD, DEOLI 150 15

Package No.3 ATAL TINKERING LAB OF NITI AAYOG MECHANICAL, ELECTRICAL and MEASUREMENT TOOLS Package No.3 ATAL TINKERING LAB OF NITI AAYOG MECHANICAL, ELECTRICAL And MEASUREMENT TOOLS ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values BASIC INFORMATIONS Name of NITI AAYOG Package Package No.3- ATAL TINKERING LAB of NITI AAYOG Mechanical, Electrical and Measurement Tools * Conformity to technical Specification As per QR/specification for Package No.3 - Atal Tinkering Lab of NITI AAYOG Mechanical, Electrical and Measurement Tools approved by NITI AAYOG(Approved Copy of Qrs/Specification uploaded in GeM portal) As per QR/specification for Package No.3 - Atal Tinkering Lab of NITI AAYOG Mechanical, Electrical and Measurement Tools approved by NITI AAYOG(Approved Copy of Qrs/Specification uploaded in GeM portal) Availability of QR/specification for 'Package No 3 - Atal Tinkering Lab of NITI Yes Yes 1/3 AAYOG Mechanical, Electrical and Measurement Tools' All guidelines and documents mention on AIM portal (http: aim(dot)gov(dot)in/g uidelines-for- school(dot)php) have been read, seen and understood completely Yes Yes QR/specification and scope of supply have been read, seen and understood completely Yes Yes Acceptance of QR/specification, scope of supply, all guidelines and documents mention on AIM portal completely Yes Yes Acceptance of complete Scope of supply of Package No 3 - Atal Tinkering Lab of NITI AAYOG Mechanical, Electrical and Measurement Tools covers all components accessories complete as per governing QR/specification Yes Yes Features and Functionality ATL Equipment List of Package No 3 - Atal Tinkering Lab of NITI AAYOG Mechanical, Electrical and Measurement Tools supplied for the Batch of students 60 students 60 students, 90 Students Vendors to provide installation and equipment training to the schools on handling and usage of equipment, after the delivery of Yes Yes 2/3 equipment, at no additional charge Vendors to provide 2 years of comprehensive warranty at no additional charge Yes Yes * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vasudha K 560026, BBMP GIRLS HIGH SCHOOL, PADARAYANAPURA, BANGALORE 560026 1 28

hopper or tipper Hopper Or Tipper ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis without facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as 1 1/6 certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 60 - Max Engine Power BHP (BHP@rpm) 16 Max Engine Torque (N-M@rpm) 37.5 Main Engine Aspiration Natural Aspiration Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 21 - Gradeability of Vehicle without load ( %) 21 - Ground Clearance (mm) 175 Wheel Base (mm) 2100 - Kerb Weight (Kg) 840 Gross Vehicle Weight (Kg) 1550 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Tube - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated 2/6 Turning Radius, Min (mm) 8600 Speed Governers No - ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 45 Tipper Container cap acity/Volume(cubic metres) 1.8 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 145 Tipper body Pivot length (mm) 1600 - Tipper body Length (mm) 2100 - Tipper Body Height (mm) 1350 - Overall Height of Tipper from Ground (mm) 1900 - Body Plate Thickness (mm) 1.6 Main Frame 2 3/6 Thickness (mm) Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Power Pack Unit - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) 0 Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 1.6 Dumping Height (mm) 45 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - 4/6 Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kumod Jayram Sontakke 441110, Municipal Council Wanadongari Ta. Hingna Dist. Nagpur. 4 15

hopper or tipper Hopper Or Tipper ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as certified by Test 21.5 1/6 Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 60 - Main Engine Aspiration Natural Aspiration Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - ABS Fitted No - 2/6 Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 2 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 4 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2165 - Tipper Body Height (mm) 670 - Overall Height of Tipper from Ground (mm) 1489 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System false - Hydarulic System true - Tipping Hydraulic - - 3/6 Cylinders(Make) Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 352 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/6 1 Kumod Jayram Sontakke 441110, Municipal Council Wanadongari Ta. Hingna Dist. Nagpur. 2 15

Notebook Computers-laptop

Inverter with sine wave output Inverter With Sine Wave Output ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Inverter Governing specification Generally conforming to IS:13314 * Rating in KVA & Min. VAH Capacity of Battery 3 KVA/12960 VAH 3 KVA/12960 VAH Technology IGBT-PWM IGBT-PWM Energy Star Rating 4 Star 4 Star Trolley with trolley with trolley Type of Battery Tubular battery confirming to IS:13369 Tubular battery confirming to IS:13369, VRLA battery confirming to JISC:8702(Pt.I, II&III) Backup time (Minutes) Minimum 180 Minutes * CONSTRUCTIONAL Thickness of sheet for trolley (in mm) minimum 1.2 * Trolley Material CRCA Steel * Type of enclosure CRCA Steel * Thickness of sheet for 1.2 * 1/3 enclosure ( in mm) minimum Inverter shall have by pass facility Yes * FUNCTIONAL Total Harmonic distortion </=5% * Input Single Phase sine wave(120 to 260 V) * Output Single Phase sine wave 240 V * Inverter Efficiency (%) >/=87% * Overload Time (in Minutes) >/=10 * Overload of rated load (in %) >/=10 * PROTECTION Battery cut-off voltage to protect from overdischarge (in Volt) >10.5 * Degree of protection IP 21 * METERING AND INDICATIONS The inverters shall be provided with output voltage and current meters conforming to IS 2419 : 1979 and of an accuracy class not inferior to 2.5 in accordance with IS 1248 : 1983 Yes * CERTIFICATIONS Availability of the Type Test Report from Central Govt. NABL/ILAC Accredited lab Yes * Climatic test report as per clause 7.10.1 of IS 13314 yes * Type Test Certificate No. 9033 * Name of Lab SHRI LAB * Type Test Certificate date 19/11/2017 * Address of Lab MUMBAI * Inverter shall have valid BIS CRS certifications for </= 10 KVA Yes * * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Udai Raj Meena 321611, GOVT COLLEGE TODABHIM, BIRAI KA THADA, PADLA ROAD, TODABHIM-321611 1 15