Organization Name Tender Results

tractors

chlorine dioxide for treating drinking water ( PAC Only ) Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 3 Year (s) Chlorine Dioxide For Treating Drinking Water ( 8750 ) ( Under PAC ) Make gacl Model gacl Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conformity to International Standard DIN EN 12671 Latest * Certificate Available YES * Agency from whom the product is approved CM/L- 9499716 * Test Report Details Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES * Test Report Number N/A * Test Report Date N/A * 1/3 Name of the Lab N/A * Address of the Lab LUCKNOW * Test report to be furnished to the buyer on demand YES * Physical State and Form Physical State POWDER * Form in which supplied POWDER * Material Raw Material from which Chlorine Dioxide is produced CALCIUM HYPOCHLORITE * Physical Characteristics Quantity of Water which can be treated by 1 Kg of raw material (Litres) 24 24 Colour WHITE * pH Value 10 * Shelf Life (Months) 12 * Period for which the treated water is safe to use after treatment (Hours) 24 * Packing Packing Size (Kg) 25 Any applicable numeric value Packing 25 KG BAG 750 RS PAR BAG/30 RUPEES PAR KG * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Khulesh Kumar Sahu 490023, Bhilai Municipal Corporation Near GE Road Supela Bhilai 490023 8750 15

Multifunction Machines

Multimedia Projectors ( PAC Only ) Experience with Gov. Required 5 Year (s) Multimedia Projectors ( 1 ) ( Under PAC ) Make epson Model epsoneb-675wiinteractiveultrashortthrowproject or Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specifications Technology LCD LCD, DLP, Lcos, SXRD, Three Clip DLP Projection Method Front * Native Resolution 1280 x 800 (WXGA) * Brightness (Lumens) 3000 * (or higher) Contrast Ratio (Minimum) (pixels) 14.000 : 1 * Zoom Feature Yes * If Yes, Zoom (%) 1.35 * Availability of Lens Yes * If Yes, Type of Lens Short Throw * Aspect Ratio 16:10 * 1/3 Keystone Correction Manual * Projection Lamp UHP UHP, LED, Laser, LED & Laser Hybrid, UHE Minimum Life of projection Lamp (In Normal Mode) (Hours) 10, 000 * Lamp Hour Counter (In- Built) Yes * Video Compatibility PAL * Inbuilt Speaker Yes * HDMI/DVI Port Yes * Analog RGB In Port (Hours) Yes * Analog RGB Out Port Yes * Audio In Yes * Audio Out Yes * Video In Yes * Storage Media Port (USB- Type A ) Yes * WiFi Availability Yes * Wireless Screen Share No * LAN Connectivity Yes * 3D Ready No * Power Consumption in Sleep Mode (Watts) 0.25 * Power Consumption in Normal Mode (Watt) 2.2 * Noise Level in Sleep Mode (dB) 37 * Noise Level in Normal Mode (dB) 28 * Power Supply 210V-240V, 50 Hz * Operating Temperature Range (Degree C) 5° C - 35° C, Storage -10° C - 60° C * Operating Humidity (RH %) 20% - 80%, Storage 10% - 90% * Dimensions (mm x mm x mm) 367 x 400 x 149 * Weight (Kg) 5.7 * BIS Registration under CRS of Meity Yes * BIS Registration Number - * 2/3 Battery No * If Yes, Battery Capacity 0 * If Yes, Battery Backup Time (Hour) 0 * ON Site OEM Warranty 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sita Ram Sharma 173217, Forest Training Institute, Chail 1 15

Multimedia Projectors

Microscopes - Pathological and Research Average Turn Over of Last 3 Years 4 Lakh (s) Experience with Gov. Required 2 Year (s) Microscopes - Pathological And Research ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values CONFORMITY/TYPE EYE PIECE - OBJECTIVE DETAILS Microscope Type pathological monocular non hinged type with built in light and with light intensity regulator pathological monocular non hinged type with built in light and with light intensity regulator Conformity to Indian Standard Pathological IS:4381 latest * ISI MARKED true true, false Eye piece Type Huygenian Huygenian, Compensating Binocular Eye pieces Confirming to the requirements of IS: 8275/1976 ( latest) 'NA' for Monocular * Eye Piece with magnification monocular 10 x monocular 10 x Objective Type achromatic achromatic, semiapochromatic, Apochromatic 1/3 Objective Magnification 100X 10 x, 20 x, 40 x, 45 x, 90 x, 100X Numerical Apperture of Objective 1.25 0.25, 0.5, 0.65, 1.25 Type of lamp for Illumination led * GENERIC Plano Concave mirror attachment yes * Stage Ractangular * Size of Stage 120 x 120 mm * Coarse and Fine Movement of stage yes * Co-axial focussing true * Micrometer Arrangement true * ACCESSORIES Extra eyepieces (inclusive in the scope of supply) 15 x 15 x Carrying case (inclusive in the scope of supply) yes * WARRANTY Warranty 2 1, 2, 3, 4, 5 (or higher) CERTIFICATION Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification true * Test Report No and Date NA * Name and Address of the Lab NA * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajendra Prasad Mali 305404, GOVERNMENT COLLEGE, KEKRI, AJMER ROAD, KEKRI (AJMER) 20 15

lead acid battery Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 3 Year (s) Lead Acid Battery ( 32 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Stationary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationary Valve Regulated Lead Acid Batteries conforming to 1/4 IS:15549/2005, Lead- Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995, Lead- Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 2.0 Volt, 6.0 Volt, 12.0 Volt Material of container ABS Hard Rubber, Fibre Reinforced Plastics (FRP), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 42 1-300 Warranty (Years) 2 Years 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Dry Charged * CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications * Volume of Electrolyte (ml) 1440 * Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. * No.of cells per Battery (No.) 6 Cells for 12 Volt battery * CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes * Address of the Lab Mohali * Name of the Lab MCIT * Test Report No. MCIT/243 * Test Report Date 28-09-12 * Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Na * 2/4 Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajendra Kumar Jain 322001, TO Swai madhopur 32 15

Slips post in slip Experience with Gov. Required 5 Year (s) Slips Post In Slip ( 500 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Type Type Slips Slips, Slip Book, Special Slip Type of Slip Sticky * Type of Labels Slips Slips, Special Slip Type of binding of slip Neon colour * Certification Slip paper Confirming Indian Standards IS 1848: latest Colour printing paper * Grammage (GSM) Grammage of top and bottom pulp board (g/m2) 90 90-200 Dimension of Slip Length of Slip (mm) 76 76-297 Width of Slip (mm) 76 76-210 Height of Slip (mm) 101 76-297 Dimension of Base Paper Length of base Paper (mm) 76 76-297 1/2 Width of base paper (mm) 76 76-210 Height of base Paper (mm) 101 76-297 Colour Colour of Slips yellow * Coloue of cover board colour * Packing Numbers of Slip in a Pack (Nos) 100 Any applicable numeric value * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sudarshan Prasad Yadav 492002, C/O Sudarshan Prasad Yadav, GAD-11 (Stationary), Room No. AA1-4, First Floor, Mahanadi Bhawan, Sector 19, Naya Raipur 500 15

hopper or tipper Hopper Or Tipper ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 1396 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as 17.88 1/6 certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 80 - Main Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 4 Fuel Tank Capacity (Ltrs) 38 Gradeability of Vehicle with load( %) 24.93 - Gradeability of Vehicle without load ( %) 25.2 - Ground Clearance (mm) 160 Wheel Base (mm) 2380 - Kerb Weight (Kg) 1100 Gross Vehicle Weight (Kg) 2255 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Power Operated Manual, Power Operated Turning Radius, Min (mm) 5100 Speed Governers yes - ABS Fitted No - 2/6 Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 47 Tipper Container cap acity/Volume(cubic metres) 3.2 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 4340 - Width of Chassis (mm) 1594 - Height of Chassis (mm) 1858 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 355.6 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2695 - Tipper Body Height (mm) 1082 - Overall Height of Tipper from Ground (mm) 1801 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 4 Pneumatic System false - Hydarulic System true - Tipping Hydraulic - - 3/6 Cylinders(Make) Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 551 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/6 1 Narendra Kallappa Kamble 416502, Ajara - sankeshwar road, Gadhinglaj 4 15

Multimedia Projectors

Printer

Vehicle Hiring Service (Long Term)

hopper or tipper Hopper Or Tipper ( 5 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, * Main Engine Capacity (cc) 1034 * Make of Chassis - * Type of Chassis Frame - * Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl * Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/6 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 20 Any applicable numeric value Speed, Max (Km/Hr) 70 * Main Engine Aspiration Natural Aspiration Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Any applicable numeric value Fuel Tank Capacity (Ltrs) 27 Any applicable numeric value Gradeability of Vehicle with load( %) 10.2 * Gradeability of Vehicle without load ( %) 10.3 * Ground Clearance (mm) 185 Any applicable numeric value Wheel Base (mm) 1970 * Kerb Weight (Kg) 924 Any applicable numeric value Gross Vehicle Weight (Kg) 1924 Any applicable numeric value No of Axle (Nos) 2 * Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - * Type of Front Axle and Suspension System - * Type of Rear Axle and Suspension System - * Type of BIS MARKED Vehicle Tyre Radial * Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 * Type of Steering Manual Manual, Power Operated Turning Radius, Min 7700 Any applicable numeric 2/6 (mm) value Speed Governers yes * ABS Fitted No * Front Vehicle Brake - * Rear Vehicle Brake - * Type of Clutch - * Tipping Angle (Degree) 85 45-9999999 Tipper Container cap acity/Volume(cubic metres) 2.4 0.5-10.5 Certification Chassis Certification ARAI/VRDE/ICAT No. - * Performance Parameters Standard Sparewheel and Tool Kit Yes * Warranty Time (Month) 24 * No. Of Free Service (Nos) 4 * Battery Warranty (Months) 12 * Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3675 * Width of Chassis (mm) 1460 * Height of Chassis (mm) 1460 * Size Of Front Tyres (mm) - * Size Of Rear Tyres (mm) - * Size of Wheel (mm) 330 Any applicable numeric value Tipper body Pivot length (mm) 1650 * Tipper body Length (mm) 2450 * Tipper Body Height (mm) 790 * Overall Height of Tipper from Ground (mm) 1500 * Body Plate Thickness (mm) 2 1.5-9999999 Main Frame 3 Any applicable numeric 3/6 Thickness (mm) value Pneumatic System false * Hydarulic System true * Tipping Hydraulic Cylinders(Make) - * Hydraulic System Driven by Power Pack Unit * Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false * Auxiliary Diesel Engine Transmission - * Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 Any applicable numeric value No. of Cylinders in Auxiliary Diesel Engine 0 * Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Any applicable numeric value Dumping Height (mm) 1180 Any applicable numeric value Engine Oil Pressure Level Indicator in Control Panel true * Fuel Gauge Indicator in Control Panel true * Engine Cooling Liquid Temperature Indicator in Control Panel true * Operating Hour Meter false * Locking/Unlocking of Tipper Discharge Container Yes * Lowering/Lifting of Tipper Discharge Container Yes * Counter Weight false * If yes Counter Weight (kg) 0 * Paint Automotive Paint * * Bold specifications are the golden parameters. 4/6 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shrikant Bhaskar Kolhe 443001, Near City police station 5 15

hopper or tipper Hopper Or Tipper ( 15 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, * Main Engine Capacity (cc) 600 * Make of Chassis - * Type of Chassis Frame - * Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl * Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/6 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 36 Any applicable numeric value Speed, Max (Km/Hr) 40 * Max Engine Power BHP (BHP@rpm) 7.4 Any applicable numeric value Max Engine Torque (N-M@rpm) 18 Any applicable numeric value Main Engine Aspiration Natural Aspiration Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 1 Any applicable numeric value Fuel Tank Capacity (Ltrs) 10.5 Any applicable numeric value Gradeability of Vehicle with load( %) 22.16 * Gradeability of Vehicle without load ( %) 22.16 * Ground Clearance (mm) 240 Any applicable numeric value Wheel Base (mm) 2100 * Kerb Weight (Kg) 438 Any applicable numeric value Gross Vehicle Weight (Kg) 975 Any applicable numeric value No of Axle (Nos) 2 * Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - * Type of Front Axle and Suspension System - * Type of Rear Axle and Suspension System - * Type of BIS MARKED Vehicle Tyre Tube * Chassis Transmission System Manual Automatic, Manual Number of Speed 4 * 2/6 Forward Gears Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 250 Any applicable numeric value Speed Governers yes * ABS Fitted No * Front Vehicle Brake - * Rear Vehicle Brake - * Type of Clutch - * Tipping Angle (Degree) 45 45-9999999 Tipper Container cap acity/Volume(cubic metres) 1.2 0.5-10.5 Certification Chassis Certification ARAI/VRDE/ICAT No. - * Performance Parameters Standard Sparewheel and Tool Kit Yes * Warranty Time (Month) 24 * No. Of Free Service (Nos) 8 * Battery Warranty (Months) 12 * Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3145 * Width of Chassis (mm) 1490 * Height of Chassis (mm) 1260 * Size Of Front Tyres (mm) - * Size Of Rear Tyres (mm) - * Size of Wheel (mm) 254.6 Any applicable numeric value Tipper body Pivot length (mm) 2100 * Tipper body Length (mm) 2100 * Tipper Body Height (mm) 1500 * Overall Height of Tipper 2100 * 3/6 from Ground (mm) Body Plate Thickness (mm) 1.5 1.5-9999999 Main Frame Thickness (mm) 2 Any applicable numeric value Pneumatic System false * Hydarulic System true * Tipping Hydraulic Cylinders(Make) - * Hydraulic System Driven by Power Pack Unit * Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false * If Yes Auxiliary Diesel Power (HP@rpm) 0 Any applicable numeric value Auxiliary Diesel Engine Transmission - * Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 Any applicable numeric value No. of Cylinders in Auxiliary Diesel Engine 0 * Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 1.5 Any applicable numeric value Dumping Height (mm) 270 Any applicable numeric value Engine Oil Pressure Level Indicator in Control Panel true * Fuel Gauge Indicator in Control Panel true * Engine Cooling Liquid Temperature Indicator in Control Panel true * Operating Hour Meter false * Locking/Unlocking of Tipper Discharge Container Yes * Lowering/Lifting of Tipper Discharge Yes * 4/6 Container Counter Weight false * If yes Counter Weight (kg) 0 * Paint Automotive Paint * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shrikant Bhaskar Kolhe 443001, Near City police station 15 15

Multimedia Projectors

Line Intractive UPS with AVR Line Intractive UPS With AVR ( 4 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 1.0/1200 * Technology MOSFET-PWM MOSFET-PWM, IGBT- PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz, Single Phase Quasi-Sin-wave 230 V AC, 50 Hz Degree of protection IP-21 IP-21, IP 20 Inverter Efficiency (%) >/= 60% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year 1 year, 3 Years Warranty for Line Interactive UPS 1 Year 1 Year, 2 Years, 5 Years, 3 Years 1/4 Installation and commissioning instructions Yes * CONSTRUCTIONAL Type of enclosure Mild steel * AC out put for printer (not through inverter) Yes Yes, No Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 2 Three pin, 3 Three pin, Hard wiring, Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% * Input (Volt) Single phase sinewave(160-280v) * Switching over time (Mili sec) Maximum 10 milli seconds * Overload Time (Minutes) >/= 10 minutes * Load power factor >/= 0.6 * Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz * Overload (%) >/=10% * Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% * Variation on output frequency in battery mode (Hz) </=0.5 * PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 * Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes * Protection against short circuit of UPS Yes * Protection for over voltage and over load Yes * 2/4 REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes * Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes * Cold Test as per IS:9000 pt-2/sec-4 Yes * Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes * Type Test certificate no. and date - * Name Of Lab - * Address of Lab - * As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shekhar Narayanrao Rathod 444104, POST GRADUATE INSTITUTE OF VETERINARY AND ANIMAL SCIENCES, KRISHI NAGAR OPPOSITE DR PDKV CAMPUS, MURTIJAPUR ROAD, AKOLA MAHARASHTRA 4 15

Desktops

Online UPS Online UPS ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Rating in KVA (KVA) 5.0 KVA 5.0 KVA Technology IGBT-PWM with inbuilt isolation transformer IGBT-PWM with inbuilt isolation transformer, MOSFET-PWM with inbuilt isolation transformer Input Power single phase 160V - 260V sinewave, 50Hz single phase 160V - 260V sinewave, 50Hz Output power Single phase 230V +/-1% sinewave 50 Hz Single phase 230V +/-1% sinewave 50 Hz Backup time (Minutes) 30 30 Minimum VAH (VAH) 7560 400-640000 Warranty for UPS (Years) 2 1, 2, 3, 4, 5 Movable trolly for Batteries Without trollery but with rack With, Without, Without trollery but with rack Warranty for battery 2 1, 2 Degree of Protection IP21 IP21, IP20 1/4 Cabling 5 meters for input and out put With With Paralleling kit for synchronising Without With, Without Installation and Commissioning Yes * CONSTRUCTIONAL Minimum thickness of M.S.Sheet Enclosure duly painted (mm) 1.2 * Type of Battery SMF-VRLA conforming to JISC:8702(Pt.I, II&III) * FUNCTIONAL Maximum overshoot and Under shoot of output rated voltage 4 * Voltage Regulation from no load to full load (%) </= 3% * 20% Overload limit for minimum 10 minutes Yes * Overall Efficiency (%) >/=90% * Total Harmonic Distortion(THD) (%) Maximum 3% * 50% Overload limit for minimum 1 minutes Yes * PROTECTION Protection for under voltage at battery terminal at 10.5V per 12 V battery. Yes * Protection of Over voltage, Short Circuit & over load at UPS output terminal Yes * METERING AND INDICATIONS Digital Metering in UPS for AC Input Voltage, Output AC Volt age, Current, Frequency, Battery Voltage and Current Yes * Indicators for mains presence, Battery charging and discharging, Output Over Load, Low Battery Voltage Yes * REPORTS AND CERTIFICATION Damp Heat : in accordance with IS:9000(part 5/sec.2)1981 at Temperature of 40 Yes * 2/4 degree C, two cycles of (12+12) hours each 2007) Dry Heat Test : in accordance with IS:9000 (part 3/sec.5)1977 (reaffirmed 2007) at 55 degree C for 16 hrs Yes * Cold Test : in accordance with IS:9000 (Part 2/Sec.4)1977 (Reaffirmed 2007) at -10 degree C for 4 hrs. Yes * Availability of the Type Test Report from Central Govt. NABL/ILAC Accredited lab covering all technical requirements. Yes * Type Test Certificate No. QVC * Type Test Certificate date 16-01-2016 * Name of Lab NATIONAL TEST HOUSE * Address of Lab GHAZIABAD * As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Suraj Singh 494111, Government Polytechnic Sukma, Kumharras, District Sukma, Chhattisgarh 2 15

Desktops

line matrix printer Average Turn Over of Last 3 Years 50 Lakh (s) Experience with Gov. Required 3 Year (s) Line Matrix Printer ( 15 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped Type of Line Matrix Printer Standard Standard, High Definition Print Method Impact Line Matrix * Type of Enclosure Pedestal * Print Speed of Standard LMP ( High Speed Draft Mode, Upper Case ) (Lines per minute) 500 500 Print Speed at 180 x 180 dpi ( For High Definition LMP) (Inches per minute) NA 36, 64, 79, NA Graphic Resolution (Horizontal) (Dots per inch) 180 * Graphic Resolution (Vertical) (Dots per 144 * 1/5 inch) Print Width (Column) (Number) 136 * Acoustics (Noise level while printing) (dBA) 60.5 * Forms Handling/Paper Hadling Continuous, Fan Folded, Edge perforated * Media Width Handling (Minimum to Maximum) (mm) 76 T0 432 MM * Fonts Supported NLQ Serif, NLQ Sans serif, Data Processing, High Speed OCR A, OCR B * Print Attributes Bold, italic, double wide, double high, overstrike, underline, subscript and superscript * Printer Support Softwares Printronix PrintNet Enterprise remote management software, SAP device support * Mean Time Between Failure ((POH) Power On Hours) 10000 * Serial port (Nos.) 1 * Parallel Port (Nos.) 1 * Ethernet Port (Nos.) 1 * USB Port (Nos.) 1 * Mean Time Between Failure (MTBF) 10000 * Power supply 230 V AC * Power consumption in Standby Mode (Watt) 5 * Power consumption in Operating Mode (Watt) 280 * BIS Registration under CRS of Meity Yes * BIS Registration Number - * Overall Dimensions (L x W x H) (mm x mm x mm) 911 x 655 x 485 mm x mm x mm * Weight (Kg) 52.1 * 2/5 Availability of Test Reports from Central Govt/NABL/ILAC accredited Lab showing Conformity to the specifications Yes * if Yes, Test Report Number - * If Yes, Test Report Date - * If Yes, Name of Test Lab - * If Yes, Address of the Test Lab - * Free installation and demonstration Yes * On Site OEM Warranty (Years) 1 1, 2, 3 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Surendra Pratap Khare 493445, TREASURY OFFICE, COLLECTORATE BUILDING, MAHASAMUND 1 15 2 Kuldeep Singh Yadav 493773, COLLECTORATE PARISAR, DHAMTARI 1 15 3 Chandra Bhushan Sahu 491001, DURG 1 15 4 Chandrahas Katiyar 495001, DISTRICT TREASURY OFFICE, BILASPUR (C.G.) 1 15 5 Mirza Ishtiyaque Ahmed Baig 491559, COLLECTORATE PAISAR, KAWARDHA 1 15 6 Dinesh Kumar Verma 492001, Indrawati Treasury, II nd floor, Indrawati Bhawan, Naya Raipur 1 15 7 Vilas Kumar Zadey 491441, COLLECTOR PARISAR RAJNANDGAON 1 15 3/5 8 Teme Lal Pisda 494334, COLLECTOR PARISAR KANKER 1 15 9 Pritam Meshram 494661, COLLECTOR PARISAR NARAYANPUR 1 15 10 Usha Rath 494552, COLLECTOR PARISAR DANTEWADA 1 15 11 Sushma Mandavi 494444, COLLECTOR PARISAR, BIJAPUR 1 15 12 Ajay Kumar Sahu 495668, COLLECTORATE PARISAR JANJGIR 1 15 13 Dashrath Prasad Soni 497001, AMBIKAPUR 1 15 14 Ramakant Rai 497335, COLLECTORATE CAMPUS BAIKUNTHPUR DIST- KOREA CHHATTISGARH 1 15 15 Edmon Minj 496331, collectorate parishar, jashpur 1 15

vortex mixers Experience with Gov. Required 4 Year (s) Vortex Mixers ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values DISCREPTION Type of Drive Motor Brushless DC Motor Brushless DC Motor, Brushless AC Motor, Brushless induction Motor, Carbon Brush DC Motor, Carbon Brush AC Motor Display Option/Output Read out Option Digital Analog, Digital, No integral Display, Other Material of Mixing Head/vortex cup Rubber Silicone, Rubber, Plastic, Steel, Aluminium Type of Vortex Mixer Standard Vortex Mixer * Type of Controller Microprocessor Controlled Microprocessor Controlled, other Timer Setting (Increment step) 999.59 * Base material Plastic Die cast aluminium, Stainless Steel, Plastic 1/4 Number of Sample tubes testable simultaneously Single Tube Single Tube, Multi- Tube Weight (kg) 2.7 * User Interface Digital Front panel With Glove mode Analog Front Panel, Digital Front Panel Without Glove mode, Digital Front panel With Glove mode Largest Volume of the tube testable 1000 Any applicable numeric value Finish of Body material Powder coated Powder coated, Electro plated, Plain finish, other Body Material Plastic Die cast Aluminium, Aluminium Alloy, Metal Alloy, Plastic Noise Level (maximum) (db) 60 Any applicable numeric value Maximum Load capacity 0.5 Any applicable numeric value WARRANTY Warranty on machine 3 3, 5 FEATURES Speed increment step, if variable speed (RPM) 2 * IP rating or Ingress protection rating 42 21-69 Activation mode Continuous run Press Activated, Continuous run, Press Activated and Continuous run Speed mode Variable Speed Fixed Speed, Variable Speed Type of Data Logging option USB * Number of Program mable/Programmed modes 1 Any applicable numeric value Maximum Speed (RPM) 3000 * Minimum Speed (RPM) 1 Any applicable numeric value Timer Provided true true, false Input Current (Amp) 6 * Pulse mode true * In built Counter balance false * 2/4 Programmable Pulse mode true true, false Speed control Accuracy (+/-) (RPM) 2 Any applicable numeric value Suction Cup in the base true * Maximum Diameter of the tube testable (mm) 4.5 * Accessories and spares included in standard pack standard pop-off cup for single test tube and a 6-ft (1.8-m) power cord with plug. * Auto Cutoff true * DIMENSIONS Orbital Diameter 4.5 2-6 External Dimension: Height 130 * External Dimension: Width 150 * External Dimension: Depth 165 * POWER Power Consumption (W) 15 * Input Voltage (V) with number of Phases 15 W Any applicable text(s) CERTIFICATIONS availability of test report (to be furnished to Buyer by Seller on demand of the former) from NABL/ILAC/Govt laboratory false * Test Report Number and date N/A * Name and address of the Lab issuing test report N/A * Product CE certified true true, false Firm certified to ISO9001:2008 or latest YES * If CE certified, EN/IEC ditrectives 60529 * OPERATING PARAMETERS Ambient operating Temperature (0 to 50 Degree Celsius) YES * * Bold specifications are the golden parameters. Consignees and Quantity 3/4 S.No. Consignee Address Quantity Delivery Days 1 Mahesh Kumar Vaishnav 342304, AGRICULTURE UNIVERSITY OPPOISTE MANDORE RAILWAY STATION JODHPUR 1 15

Air Conditioner

ambulances

scales (Steel scale) Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Scales (Steel Scale) ( 110 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Steel Scale confirming to IS:1481 Yes - Size Nominal Size (cm) 30 15, 30, 100 Material and Type Material spring Steel - Type of Steel Scale (Graduation on both edges) AA AA, BB * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prashant Madan Chourasiya 110091, 2nd Floor, Delhi Govt. Health Centre, 30-Extra Block, Himmatpuri (Trilok Puri), 110 15

All in one Average Turn Over of Last 3 Years 35 Lakh (s) Experience with Gov. Required 5 Year (s) All In One ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Processor Processor Make Intel * Processor Generation 7th 7th Processor Intel Core i5-7400 (3.0 GHz, 6 MB Cache, 4 Cores) Intel Core i5-7400 (3.0 GHz, 4 Cores) Chipset Chipset Intel H110 * Graphics Graphics type Integrated * Graphic Card Description Intel Integrated HD Graphics 630 * Storage Type of Hard disk drive SATA SATA Hard Disk Drive Size (GB) 1000 1000 (or higher) Hard disk drive speed (RPM) 7200 * 1/3 RAM Type of RAM DDR4 * RAM Size (GB) 4 4 RAM Expandability Upto (GB) 32 32 Ram speed (MHz) 2400 * Operating System Operating system Windows 10 Professional Windows 10 Professional OS Certification Windows * Display Display Size (Inch) 19.5 19.5 Type of Display Non Touch Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes * Ports USB Port 2.0 (No.) 2 * USB Port 3.0 (No.) 2 * VGA Port Not-Available * HDMI Port Available * Thunderbolt Port (No.) Not-Available * Display Port Not-Available * Input Devices Keyboard Standard with USB Interface * Mouse Optical Scroll with USB Interface * Audio Integrated Stereo Sound with internal speakers & Mic. * Connectivity Wi-fi Connectivity 802.11 ac * Bluetooth Connectivity 4.0 or higher * LAN Port Integrated Gigabit Ethernet 10/100/1000 * Certification BIS Registration under CRS of Meity Yes * BIS Registration no - * Certifications Available BEE * ROHS Compliance Yes * Power Maximum Wattage 120 * 2/3 (Watts) Power Efficiency (%) Minimum 80 * Others Webcam Full HD * DVD R/W Available * Optical drive Integrated * Stand Standard * On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sanjay Wasudeorao Thakare 444604, VMV Road, Near Kathora Naka, Amravati- 444604 20 15

call bell Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Call Bell ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Certification (If any) NA - Technology Technology must be Anti Interface Yes - Type Wireless Yes Yes Physical Characteristics Length of Bell (mm) 125 - Width of Bell (mm) 80 - Height of Bell (mm) 25 - Weight of Bell (gm) 100 - Wattage of Bell (Watt) 10 Maximum dB Level (dB) 5 Number of Ringtones (Nos) 36 - Operational Characteristics Maximum Number of Non Interfering Units Possible with the Design (Nos) 5 - Operational Voltage Battery 230 Volt ac, Battery 1/3 Range (Bell) Type of Battery PENCIL TYPE - Rating of Battery 1.5 - Switch Details Operating Switch Battery Operated Battery Operated, AC Operated Operating Range of Switch (Meters) 100 Details for Battery for Switch MINI - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prashant Madan Chourasiya 110091, 2nd Floor, Delhi Govt. Health Centre, 30-Extra Block, Himmatpuri (Trilok Puri), 4 15

Printer

personal safety kit reflective luminous garments Personal Safety Kit Reflective Luminous Garments ( 500 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC Conformity to EN Standard EN:471-2003 + A1:2007 * This garment as per the specification Yes * Reflective Luminous Garments High visibility warning garments with synthetic slide fasteners High visibility warning garments with synthetic slide fasteners, High visibility warning garments with synthetic hook and loop fasteners Type of garment Waist coat Waist coat, Jacket, Harness Drawing for Reflective Luminous Garments http:/www.dgserver.dg snd.gov.in/rc/46161712 .pdf * Drawing seen and understood Yes * CONSTRUCTIONAL Size Extra Large(XL) ( Suitable for person of height 176-183 cm, Small (S) ( Suitable for person of height 152-160 cm, Chest 1/7 Chest Girth 113-117 cm, Waist Girth 92-97 cm) Girth 96-102 cm, Waist Girth 76-81cm), Medium(M) (Suitable for person of height 161-168 cm, Chest Girth 103-107 cm, Waist Girth 82-86 cm), Large(L) ( Suitable for person of height 169-175 cm, Chest Girth 108-112 cm, Waist Girth 87-91 cm), Extra Large(XL) ( Suitable for person of height 176-183 cm, Chest Girth 113-117 cm, Waist Girth 92-97 cm) Garment color Flourescent orange-red (for Essential Service ) * BASIC CLOTH Yes * The overall blend composition as per IS : 3416:1988 Polyester 65 +/- 3 % and Cotton 35% * SEWING THREAD 100% Spun Polyester 3 ply sewing thread of matching colour of best trade quality shall be used for stitching. * Fabrication fabrication of waist coat as per drawing and specification fabrication of jacket as per drawing and specification, fabrication of waist coat as per drawing and specification, Fabrication of Harness: As per drawing and specification Total area of back ground material front plus back as per EN 471:2003 (sq. mtr) 0.8/0.5 * There shall be no joints at face and back of the garment either on background material or on Reflective material. Yes * Width of retro reflective material for all types of garments (mm) 75555 * Patch pocket true * Patch pocket 15 x 15 * 2/7 Confirmity to EN Standard size (cm) Piping shall be given using self material of background cloth Yes * Ends per inch and picks per inch of background material KITS TO BE PROVIDED WITH SAFETY HELMET, SAFETY GLOVES, SAFETY MASK, SAFETY GOGGLES, SAFETY JACKETS IN A BAG * Area of back ground material for front/back side (%) 50/50 * Area of retro reflective material - front/back side (%) 50/50 * Total Area of retro reflective material front back as per EN 471:2003 (sq. mtr) 0.20/0.13 * Back ground material front plus back as per EN 471:2003 (sq. mtr) Total Area. 0.8/0.5 * Retro reflective tape Micro prismatic type, white or silver colour certified by the manufacturer of retro reflective material.The retro reflective material should be certified by the manufacturer to withstand 75 wash cycles @ 60 degree C and for Temperature Variation test. * FASTENERS for High visibility warning garments with synthetic slide fasters: For Jacket & Waist Coat the same shall be Heavy Open ended flat auto lock type. Yes * Fastner- Hook and Loop, Tape - 50mm wide as per IS : 8156(RA 2004) and drawing Yes * Marking General Marking : Each piece of warning Yes * 3/7 garment shall be marked by providing a Cloth Label attached affixed to the garment. The label shall be visible, legible and durable up to 75 cycles of washing. The marking shall be in black on white background either woven or printed. Specific Marking Name or trade mark of the manufacturer, Desig nation of the product, Class, Size of Garment Level of performance and Specification No. * Marking of departmental identification true * Marking required as per user department choice true * Marking depaertmental identifications (micro prismatic material) for back (cm) 20 x 15 * Marking departmental identifications (micro prismatic material) in case of coverall, bib and brtaze trouser (cm) 30 x 5 * Marking depaertmental identifications (micro prismatic material) for front (cm) 15 x 5 * PERFORMANCE HIGH GLOW RETROREFLECTIVE MATERIAL Micro prismatic material of 50 mm wide Band of new material conforming to EN 471-2003 + A1:2007 shall be used. The supply shall confirm to the requirements of Level 2 of separate performance material confirming to Table 4 of EN471:2003 +A1:2007 * The garment shall provide 360 degree visibility Yes * Chromaticity co- ordinates and luminous Yes * 4/7 factor of background material as per table 2 of EN 471-2003 Chromaticity co- ordinates and luminous factor of background material after exposure to xenon arc lamp as per table 2 of EN 471-2003 Yes * PACKAGING Packing Each piece will be packed in Button down Poly bags of 200 GSM and 50 such pieces to be packed in corrugated Carton boxes of 6 ply with 160 GSM top duplex board * CERTIFICATION Care labeling Yes * Manufacturers test certificate for synthetic (Plastic) slide fastners or synthetic hook and loop fastners used in the garment shall be provided to buyer on demand. Yes * Manufactures test report for reflective material used for printing of departmental identity to specification no. EN 13356-2001 High Visibility accessories for non professinal use shall be provided to buyer on demand. Yes * Test certificate of Retro Reflective tapes certified by the manufacturer or any International Laboratory certifying that the reflective tape confirms to EN 471-2003+A1:2007 shall be provided to buyer on demand. Test certificate should specifically mention about the batch/Lot number and manufacturers marking Yes * 5/7 and product code on it. Test reports to be provided to buyer on demand Yes * Purchase document for co-relating the luminous material and Background Material used in the manufacturing of the supply shall be maintained by manufacturer and same shall be provided to buyer on demand. Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kavindra Pratap Singh 211002, KUMBH OFFICE MORDERN CONTROL ROOM, POLICE LINE ALLAHABAD 500 20

Restaurant Chair

dot matrix printers Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 3 Year (s) Dot Matrix Printers ( 8 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Number of Pins (Nos.) 9 9 Number of Columns (Nos.) 80 80 Print Speed at Draft Mode at 10 cpi (cps) 260 Any applicable numeric value Print Speed at High Speed Draft Mode at 10 cpi (cps) 347 Any applicable numeric value Print Speed at NLQ Mode at 10 cpi for 9 pin only (cps) 65 * Print Speed at LQ Mode at 10 cpi for 24 pin only (cps) 0 * Input Data Buffer Capacity (KB) 100 50, 100 1/3 Auto share feature No * Parallel Port Available * USB Available * Network Interface ( LAN ) Available * Over all dimensions (Length x Width x Height) (mm) 362x275x154 * Weight (Kgs) 4.1 * Power Supply 230 V AC * Power consumption- max in Print Mode (watts) 27 * Power consumption- max in Standby Mode (watts) 1.1 * BIS Registration under CRS of Meity Yes * BIS Registration Number - * Availability of test reports from Central Govt/NABL/ILAC accredited Lab showing conformity to the specification No * If yes, Test Report Number - * If Yes, Test Report date - * If Yes, Name of Test lab - * If yes, Address of Test Lab - * On Site OEM Warranty (Years) 2 2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lalit M Solanki 395006, Fifth Floor, Urja Sadan, Corporate Office, DGVCL, Kapodara Char Rasta, Nana Varachha Road 8 15

Multifunction Machines

Air Conditioner

Line Intractive UPS with AVR ( PAC Only ) Average Turn Over of Last 3 Years 4 Lakh (s) Line Intractive UPS With AVR ( 21 ) ( Under PAC ) Make numeric Model numeric1kva Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 1.0/168 1.0/168 Technology MOSFET-PWM MOSFET-PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz, Single Phase Quasi-Sin-wave 230 V AC, 50 Hz Degree of protection IP-21 IP-21 Inverter Efficiency (%) >/= 60% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year 1 year 1/4 Warranty for Line Interactive UPS 2 Years 2 Years Installation and commissioning instructions No * CONSTRUCTIONAL Type of enclosure ABS * AC out put for printer (not through inverter) Yes Yes Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 3 Three pin FUNCTIONAL Total harmonic distorsion (%) </= 40% * Input (Volt) Single phase sinewave(160-280v) * Switching over time (Mili sec) Maximum 10 milli seconds * Overload Time (Minutes) >/= 10 minutes * Load power factor >/= 0.6 * Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz * Overload (%) >/=10% * Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% * Variation on output frequency in battery mode (Hz) </=0.5 * PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 * Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes * Protection against short circuit of UPS Yes * 2/4 Protection for over voltage and over load Yes * REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes * Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes * Cold Test as per IS:9000 pt-2/sec-4 Yes * Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes * Type Test certificate no. and date - * Name Of Lab - * Address of Lab - * As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shiv Kumar 202001, Collectorate Aligarh 21 15

Human Resource Outsourcing Service

Professional Large Format Display

Camera for CCTV System, Video Recorder for CCTV System, Installation & Commissioning charges for CCTV Cameras (Accessories) Average Turn Over of Last 3 Years 71 Lakh (s) Experience with Gov. Required 5 Year (s) Camera For CCTV System ( 60 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values CAMERA TYPE Type of Camera Housing DOME CAMERA DOME CAMERA, BOX CAMERA, BULLET CAMERA IP Camera Yes Yes, No PTZ Camera No Yes, No IMAGE SENSOR Image Sensor Type CMOS CCD, CMOS Image Sensor Size 0.357 1, 0.67, 0.5, 0.34, 0.25, 0.357, 0.37, 0.4 (or higher) Camera Image Sensing capacity (Picture Mode) 2MP 2MP Resolution Full HD (1920 x 1080 Pixel) D1 (704 x 480 Pixel), HD (1280 x 720 Pixel), Full HD (1920 x 1080 1/21 Pixel), 4K HD (3840 X 2160 Pixel) Day/Night Capable true true, false IR illumination Range(mtr) 30 15, 30, 50, 80, 100, 120, 150, NA OPTICS Lens Type Fixed * Focal Length(mm) 3.6 * Iris Control Yes * Focus Mode Auto * VIDEO Frame Rate (fps) 30 25, 60 Video Compression H.264, H.265, MJPEG * Video Streaming Quad Compressed Stream Dual compressed stream, Triple compressed stream, Quad Compressed Stream PAN/TILT/ZOOM Panning Range NA * Pan Speed (deg/sec) NA 120, 240, 320, NA, 180 Tilt Range below horizontal (deg) NA * Tilt Range above horizontal (deg) NA * Tilt Speed (deg/sec) NA 90, NA Optical Zoom NA 12X, 20X, 30X, 36X, 44X, NA Digital Zoom 10X 10X AUDIO Audio Support false true, false Audio Compression NA * Audio Streaming NA * Number of Audio Input Channel NA * Number of Audio Output Channel NA * External Microphone Support false * ALARM Alarm Support false true, false Number of Alarm Digital Input NA * Number of Alarm Relay Output NA * Pre/Post Alarm Buffer false * SECURITY Multi Level User Yes * 2/21 ID/Password IP Address Filtering true * Encrypted Data Transmission HTTPS (SSL/TSL) * PERFORMANCE Minimum Illumination for Capturing Color Image 0.05 0.6, 0.2, 0.1, 0.05, 0.01 (or lower) Electronic Shutter Speed(sec) 1/25 to 1/50000 * WDR (Wide Dynamic Range) 120 dB 120 dB SNR (Signal to Noise Ratio) 40-50 40-50, 50-60, 60-70, 70-80 Auto Exposure Auto Level Control * FEATURES White Balance ( Indoor/Out door/Manual Selectable) Yes * Auto Gain Control (On/Off selectable) Yes * Back Light Compensation Yes * Remote Administration (Remote configuration and status using web based tool) Yes * Remote System Update Over Network Yes * PC Client (PC application client with a channel recording feature support) Yes * Web Client (Viewer through HTTP system configuration) Yes * On Screen Display in English Yes * ONVIF Support Yes * Presets 50.0 * Group Touring 10.0 * Privacy Zones 4 * NETWORK AND INTERFACE Supported Protocols DDNS, DHCP, DNS, FTP, H TTP, HTTPS, NTP, RTP, RT SP, SMTP, SNMP * IP Support Dynamic, Static * 3/21 Signal Processing Digital Signal Process * IPv6 ready No * Wireless false * Simultaneous Connections 5.0 * STORAGE On Board SD Card Support true * SD Card Memory(GB) 128 * HOUSING Installation Type Indoor Indoor, Outdoor Material of the Housing construction Alluminium Alluminium, Plastic Protection IP 66 * Vandal Resistant Housing Yes * If Yes, IK rating IK 10 * Mounting bracket Ceiling Mounted * Weight 1400.0 * Dimensions (mm x mm x mm) 158x134 * POWER SUPPLY Power Input PoE * Power Consumption 7.0 * Suitable Adapter Shall be Supplied to Make the Equipment Work on 230 V (+/- 10 %), 50 Hz NA * OPERATING CONDITIONS Operating Temperature Range -20 to +50 deg C * Relative Humidity Non Condensing (%) 95 * WARRANTY/SERVICES Warranty 2.0 2.0 (or higher) Time for Replacement of Defective Product During Warranty Period 72.0 12, 24, 36, 48, 72 (or lower) Supply of Compatible drivers and software included No * ENVIRONMENTAL CERTIFICATION Availability of facility & infrastructure for verification of all parameters, features, and capability with Yes * 4/21 Seller Availability of facility to test signal to noise ratio of camera at 0-01 lux Yes * Conformity to Dry Heat test at 55 degree C for 16 hours as per IS :9000 latest Yes * Conformity to Damp heat at 40 degree C - 95% RH (cyclic test): two cycles of 16+8 hours as per IS: 9000 latest Yes * Conformity to Cold test at -10/-20 degree C for 4 hours as per IS: 9000 latest, as applicable Yes * BIS Registration for safety general requirements as per IS 13252 (Part 1):latest Yes * Availability of Type Test Report from Central Govt NABL/ILAC accredited lab to prove conformity to specification true * Test Report Number and Date CTE17080025 and Date:14/9/2017 * Name and Address of Test Lab Shenzhen Huatongwei International Inspection Co., Ltd. # Hongfa Hi- tech Industrial Park, Genyu Road, Tianliao, Gongming, Shenzhen, Guangdong, China * Certification CE, FCC * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Suteekshan Dwivedi 464114, GOVT POLYTECHNIC COLLEGE, LATERI 60 15 5/21 Video Recorder For CCTV System ( 3 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values TYPE Type of Recording Device NVR NVR, DVR, Hybrid Video Recorder (HVR) IP Camera Support true true, false PTZ Camera control Support true true, false Housing construction Alluminium Alluminium, Plastic Mounting Rack Mounted * Rack Mount configuration 1U * Capability of Recorder to Work with Other Makes of CCTV Cameras (ONVIF support) true * VIDEO Number of Video Input Channels 16 4, 8, 16, 32, 64, 128, 256 Number of Non-IP based Video input Channels for HVR NA 4, NA Number of IP based Video input Channels for HVR NA 4, NA Number of Video Output Channels 16 1, 2, 4, 64 Recording Resolution 4K (3840 × 2160) D1 (704 x 480), HD (1280 x 720), Full HD (1920 x 1080), 4K (3840 × 2160) Supported Compression Technique H.265, MJPEG, H.264 * Maximum Number of cameras to be viewed on a single display 16 * Total number of simultaneous local views 1 * Simultaneous Monitoring Connections for All Cameras (Users 4 * 6/21 in Local Network for Client Connection) Recording Speed for all channels (fps) 25 * Minimum Through put (Mbps) 512 * Display Image Rate Real time per channel * AUDIO Audio Support true * Audio Input 16 * Audio Output 1 * Audio Compression G.726, G.711 * Minimum Number of Simultaneous Channels for Two-way Audio Support 1 * SECURITY Type of Encryption HTTP (SSL/TSL) * Multi Level User ID Password Yes * ALARM Alarm Support true * Alarm Input 4 * Alarm Output 1 * Pre/Post Alarm Buffer true * Pre-Alarm Recording 30 * Post-Alarm Recording 60 * Video Content Analytics (VCA) Trip-wire Detection, Motion Detection, Crossing line, Intrusion Detection, Tampering * NETWORK PROTOCOLS INTERFACE OPERATING SYSTEM Operating System Supported Windows, MAC, Linux * Supported Network Protocols DHCP, HTTP, DDNS, RTSP, U PnP, TCP/IP * Supported Interface Ethernet, HDMI, USB, US B * Physical Layer of Ethernet 10/100/1000 Base TX * Number of Ethernet Ports 2 * Number of HDMI Ports 1 * Number of VGA Ports 0 * Number of CVBS Ports 0 * 7/21 Number of USB Ports 2 * Number of Serial Ports 0 * Number of PoE Ports 0 * Supported SIM Slot NA * Number of SIM Slots 0 * FEATURES Video Loop Support false * Video Recorder supports recording on NAS Directly true * Remote Administration (Remote Configuration And Status Using Web Based Tool) true * System Update (Remote System Update Over Network Using Web Client) true * PC Client (PC Application Client With A Channel Recording Feature Support) true * Web Client (Viewer through HTTP system configuration) No * On Screen Display (In English) true * Drivers/Compatible Software (Wherever Applicable) Part Of Supply Yes * Recording schedule support Yes * Bandwidth Control Yes * Camera Notification Spot (POP up Window) on Event, SMS, E-mail * Network transmission Speed Real time display @ D1 resolution * Other features, if any Cascading (Monitor multiple NVRs without server), Adapting recording and camera wise recording retention * PLAYBACK/VIEW MANAGEMENT Search Date, Time, Event, Log, M otion, Bookmarks * Bookmarks Forward, Backward, adju stable playback * 8/21 speed, Full Screen, Next Camera, Previous Camera, Repeat Page preview Multi Monitor Support, Video Window, Electronic Map on two separate monitors * Total Management Group add, Delete, Group management * Camera Add, Edit, Use Master account, Use Specific account * STORAGE Internal Hard Drive Interface SATA III * Number of Hard Disks (inclusive in the scope of supply) 1 * Storage Capacity of each Hard Disk (TB) 10 * Total Storage Capacity(TB) 4 * Internal Storage Expandable upto (TB) 16 * Number of Hard Disks supported 2 * Redundancy Option RAID 1 * POWER SUPPLY Power Input 12 V DC * Power Consumption 60 * Suitable Adapter to be Supplied to Make the Equipment Work on 230 V ± 10 %, 50 Hz Yes * Redundant Power Supply false * OPERATING CONDITIONS Minimum Operating Temperature 0 * Maximum Operating Temperature 50 * Relative Humidity Non Condensing at 40 deg C 95 * WARRANTY/SERVICES Warranty 2 1, 3, 5 Time for Replacement of Defective Product 96 12, 72, 96 9/21 During Warranty Period ENVIRONMENTAL CERTIFICATION Availability of facility and infrastructure for verification of all the parameters, features and capability with the Seller true * Conformity to Dry Heat test at Specified Maximum Operating Temperature for 16 hours as per IS :9000 latest true * Conformity to Damp heat at 40 degree C - 95% RH (cyclic test): two cycles of 16+8 hours as per IS: 9000 latest true * Conformity to Cold test at Specified Minimum Operating Temperature for 4 hours as per IS: 9000 latest true * BIS Registration for safety general requirements as per IS: 13252 (Part 1): latest false * Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification false * Test Report Number and Date NA * Name and Address of Test Lab NA * Certification NIL * LIST OF ITEMS List of Items and Quantity of each item included in the offer 16 Channel NVR + 4 TB Hard Disk + Power Supply + Mounting Brackets * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Suteekshan 464114, GOVT POLYTECHNIC 3 15 10/21 Dwivedi COLLEGE, LATERI Video Recorder For CCTV System ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values TYPE Type of Recording Device NVR NVR, Plastic Mounting Rack Mounted * Rack Mount configuration 1U * Capability of Recorder to Work with Other Makes of CCTV Cameras (ONVIF support) true * VIDEO Number of Video Input Channels 32 4, NA Number of Video Output Channels 32 1, 4K (3840 × 2160) Supported Compression Technique H.264, MJPEG * Maximum Number of cameras to be viewed on a single display 32 * Total number of 1 * 11/21 simultaneous local views Simultaneous Monitoring Connections for All Cameras (Users in Local Network for Client Connection) 4 * Recording Speed for all channels (fps) 25 * Minimum Through put (Mbps) 512 * Display Image Rate Real time per channel * AUDIO Audio Support true * Audio Input 32 * Audio Output 1 * Audio Compression G.726, G.711 * Minimum Number of Simultaneous Channels for Two-way Audio Support 1 * SECURITY Type of Encryption HTTP (SSL/TSL) * Multi Level User ID Password Yes * ALARM Alarm Support true * Alarm Input 2 * Alarm Output 1 * Pre/Post Alarm Buffer true * Pre-Alarm Recording 30 * Post-Alarm Recording 60 * Video Content Analytics (VCA) Trip-wire Detection, Intrusion Detection * NETWORK PROTOCOLS INTERFACE OPERATING SYSTEM Operating System Supported Windows, Linux * Supported Network Protocols UDP, SNMP, R STP, D DNS, UPnP, SM TP, VGA, US B * Physical Layer of Ethernet 10/100/1000 Base TX * Number of Ethernet Ports 2 * 12/21 Number of HDMI Ports 1 * Number of VGA Ports 1 * Number of CVBS Ports 0 * Number of USB Ports 2 * Number of Serial Ports 0 * Number of PoE Ports 0 * Supported SIM Slot NA * Number of SIM Slots 0 * FEATURES Video Loop Support false * Video Recorder supports recording on NAS Directly true * Remote Administration (Remote Configuration And Status Using Web Based Tool) true * System Update (Remote System Update Over Network Using Web Client) true * PC Client (PC Application Client With A Channel Recording Feature Support) true * Web Client (Viewer through HTTP system configuration) No * On Screen Display (In English) true * Drivers/Compatible Software (Wherever Applicable) Part Of Supply Yes * Recording schedule support Yes * Bandwidth Control Yes * Camera Notification Spot (POP up Window) on Event, Adapting recording and camera wise recording retention * 13/21 PLAYBACK/VIEW MANAGEMENT Search Date, adju stable playback speed, Repeat * Page preview Multi Monitor Support, Use Specific account * STORAGE Internal Hard Drive Interface SATA III * Number of Hard Disks (inclusive in the scope of supply) 2 * Storage Capacity of each Hard Disk (TB) 4 * Total Storage Capacity(TB) 8 * Internal Storage Expandable upto (TB) 16 * Number of Hard Disks supported 2 * Redundancy Option RAID 1 * POWER SUPPLY Power Input 12 V DC * Power Consumption 60 * Suitable Adapter to be Supplied to Make the Equipment Work on 230 V ± 10 %, 50 Hz NA * Redundant Power Supply true * OPERATING CONDITIONS Minimum Operating Temperature 0 * Maximum Operating Temperature 50 * Relative Humidity Non Condensing at 40 deg C 95 * 14/21 WARRANTY/SERVICES Warranty 1 1, 5 Time for Replacement of Defective Product During Warranty Period 96 12, 96 ENVIRONMENTAL CERTIFICATION Availability of facility and infrastructure for verification of all the parameters, features and capability with the Seller true * Conformity to Dry Heat test at Specified Maximum Operating Temperature for 16 hours as per IS :9000 latest true * Conformity to Damp heat at 40 degree C - 95% RH (cyclic test): two cycles of 16+8 hours as per IS: 9000 latest true * Conformity to Cold test at Specified Minimum Operating Temperature for 4 hours as per IS: 9000 latest true * BIS Registration for safety general requirements as per IS: 13252 (Part 1): latest false * Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification false * Test Report Number and Date NA * Name and Address of Test Lab NA * Certification NIL * LIST OF ITEMS List of Items and Quantity of each item included in the offer 32 Channel NVR + Two 4 TB Hard Disk + Power Supply + Mounting Brackets * * Bold specifications are the golden parameters. Consignees and Quantity 15/21 S.No. Consignee Address Quantity Delivery Days 1 Suteekshan Dwivedi 464114, LATERI 1 15 Camera For CCTV System ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values CAMERA TYPE Type of Camera Housing BULLET CAMERA DOME CAMERA, 0.4 (or higher) Camera Image Sensing capacity (Picture Mode) 2MP 1MP, 1.3MP, 2MP, 3MP, 4MP, 5MP, 6MP, 8MP Resolution Full HD (1920 x 1080 Pixel) D1 (704 x 480 Pixel), Full HD (1920 x 1080 Pixel), Quad Compressed Stream 16/21 PAN/TILT/ZOOM Panning Range NA * Pan Speed (deg/sec) NA 120, NA Digital Zoom 10X 10X, 12X, 16X, NA AUDIO Audio Support false true, false Number of Alarm Digital Input NA * Number of Alarm Relay Output NA * Pre/Post Alarm Buffer false * SECURITY Multi Level User ID/Password Yes * IP Address Filtering true * Encrypted Data Transmission HTTPS (SSL/TSL) * PERFORMANCE Minimum Illumination for Capturing Color Image 0.05 0.6, 0.01 (or lower) Electronic Shutter Speed(sec) 1/25 to 1/50000 * WDR (Wide Dynamic Range) 120 dB 80 dB, 100 dB, 120 dB, DWDR SNR (Signal to Noise Ratio) 40-50 40-50, 70-80 Auto Exposure Auto Level Control * FEATURES White Balance ( Indoor/Out door/Manual Yes * 17/21 Selectable) Auto Gain Control (On/Off selectable) Yes * Back Light Compensation Yes * Remote Administration (Remote configuration and status using web based tool) Yes * Remote System Update Over Network Yes * PC Client (PC application client with a channel recording feature support) Yes * Web Client (Viewer through HTTP system configuration) Yes * On Screen Display in English Yes * ONVIF Support Yes * Presets 50.0 * Group Touring 10.0 * Privacy Zones 4 * NETWORK AND INTERFACE Supported Protocols DDNS, TCP/IP * IP Support Dynamic, Static * Signal Processing Digital Signal Process * IPv6 ready No * Wireless false * Simultaneous Connections 5.0 * STORAGE On Board SD Card Support true * SD Card Memory(GB) 128 * HOUSING Installation Type Indoor, Outdoor Indoor, IK rating IK 10 * 18/21 Mounting bracket Ceiling Mounted * Weight 920.0 * Dimensions (mm x mm x mm) 320 X 84.5 X 92.5 * POWER SUPPLY Power Input PoE * Power Consumption 7.0 * Suitable Adapter Shall be Supplied to Make the Equipment Work on 230 V (+/- 10 %), 50 Hz NA * OPERATING CONDITIONS Operating Temperature Range -20 to +50 deg C * Relative Humidity Non Condensing (%) 95 * WARRANTY/SERVICES Warranty 2.0 1, 5 (or higher) Time for Replacement of Defective Product During Warranty Period 72.0 12, and capability with Seller Yes * Availability of facility to test signal to noise ratio of camera at 0-01 lux Yes * Conformity to Dry Heat test at 55 degree C for 16 hours as per IS :9000 latest Yes * Conformity to Damp heat at 40 degree C - 95% RH (cyclic test): two cycles of 16+8 hours as per IS: 9000 latest Yes * Conformity to Cold test at -10/-20 degree C for 4 hours as per IS: 9000 latest, as applicable Yes * 19/21 BIS Registration for safety general requirements as per IS 13252 (Part 1):latest Yes * Availability of Type Test Report from Central Govt NABL/ILAC accredited lab to prove conformity to specification true * Test Report Number and Date CTE17090103 and Date:27/09/2017 * Name and Address of Test Lab Shenzhen Huatongwei International Inspection Co., LATERI 20 15 Installation & Commissioning Charges For CCTV Cameras (Accessories) ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Installation & Commissioning charges for CCTV Cameras (Accessories) Type of Camera IP Camera IP Camera, Non-IP Camera, PTZ Camera, Assorted cameras Shape of Camera Housing Assorted Dome, Box, Bullet, Assorted Installation Type Assorted Indoor, Outdoor, Assorted Type of Mounting Assorted Wall Mounted, Pole Mounted, Ceiling Mounted, Assorted 20/21 Number of Cameras to be installed 51 to 100 Upto 10, 11 to 25, 26 to 50, 51 to 100, 101 & above Agreed to STC of the Product Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Suteekshan Dwivedi 464114, LATERI 1 15

Multifunction Machines

All in one All In One ( 25 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel - Processor Generation 7th 7th Processor Intel Core i3-7100 (3.9 GHz, 3 MB Cache, 2 Cores) Intel Core i3-7100 (3.9 GHz, 2 Cores) Chipset Chipset On OEM Motherboard - Graphics Graphics type Integrated - Graphic Card Description HD - Storage Type of Hard disk drive SATA SATA Hard Disk Drive Size (GB) 1000 1000 (or higher) Hard disk drive speed (RPM) 7200 - RAM Type of RAM DDR4 - RAM Size (GB) 4 4 RAM Expandability Upto (GB) 32 8, 16, 32, Not- Available 1/3 Ram speed (MHz) 2133 - Operating System Operating system Windows 10 Professional Windows 10 Professional OS Certification Windows - Display Display Size (Inch) 21.45 21.45 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080 TCO Certification Yes - Ports USB Port 2.0 (No.) 2 - USB Port 3.0 (No.) 2 - VGA Port Not-Available - HDMI Port Available - Thunderbolt Port (No.) Not-Available - Display Port Not-Available - Input Devices Keyboard Standard with USB Interface - Mouse Optical Scroll with USB Interface - Audio Integrated Stereo Sound with internal speakers & Mic. - Connectivity Wi-fi Connectivity 802.11 ac - Bluetooth Connectivity 4.0 or higher - LAN Port Integrated Gigabit Ethernet 10/100/1000 - Certification BIS Registration under CRS of Meity Yes - BIS Registration no - - Certifications Available Energy Star - ROHS Compliance Yes - Power Maximum Wattage (Watts) 65 - Power Efficiency (%) Minimum 80 - Others Webcam HD - DVD R/W Available - Optical drive Integrated - Stand Standard - On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Narayan Laxman Yevage 400032, VJNT, OBC and SBC Department, 1st Floor, Annex Building, Mantralay, Madam Cama Road, Hutatma Rajguru Chowk, Mumbai - 400032, 25 15

Slips post in slip Experience with Gov. Required 5 Year (s) Slips Post In Slip ( 500 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Type Type Slips Slips, Slip Book, Special Slip Type of Slip Sticky * Type of Labels Slips Slips, Special Slip Type of binding of slip Neon colour * Certification Slip paper Confirming Indian Standards IS 1848: latest Colour printing paper * Grammage (GSM) Grammage of top and bottom pulp board (g/m2) 150 90-200 Dimension of Slip Length of Slip (mm) 76 76-297 Width of Slip (mm) 76 76-210 Height of Slip (mm) 76 76-297 Dimension of Base Paper Length of base Paper (mm) 76 76-297 1/2 Width of base paper (mm) 76 76-210 Height of base Paper (mm) 76 76-297 Colour Colour of Slips yellow * Coloue of cover board ALL * Packing Numbers of Slip in a Pack (Nos) 100 100 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sudarshan Prasad Yadav 492002, C/O Sudarshan Prasad Yadav, GAD-11 (Stationary), Room No. AA1-4, First Floor, Mahanadi Bhawan, Sector 19, Naya Raipur 500 15

scissors

stapler pin Stapler Pin ( 100 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Material Material of the Pin steel Any applicable text(s) Size Size Designation 10 * Crown Size (mm) 25 Any applicable numeric value Dimension Packing Number of Pins in a strip (Nos) 50 1-100 Number of strips in a box (Nos) 20 1-100 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJEEV KUMAR 110002, 6th Level, C Wing, Delhi Secretariat, IP Estate, 100 15

solar water heating system Average Turn Over of Last 3 Years 3 Lakh (s) Solar Water Heating System ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to standards for Solar water Heating System -Code for Acceptance IS:12976:1990 with latest amendment - BIS Approved Yes Yes If Yes, Mention CM/L No. otherwise write NA 7473583 - Model Number of Solar Water Heater System Skylark Solar 12 - Solar water Heating System Compatibility with Heat Exchange Solar water Heating System with Heat Exchanger Solar water Heating System with Heat Exchanger, Solar water Heating System with out Heat Exchanger Region Type 2 Warm (Areas where ambient temp. is moderate and do not normally below 5 Deg. C - Rated Capacity in Litres per Day (LPD) 500 500 Warranty (Years) 3 Years 3 Years CONSTRUCTIONAL Aperture area of 2.0 1.8, 2.0, 3.6, 4.0, 5.4 1/6 collector, Sq. Meteres (Sq Meter), 6.0, 9.0, 10.0, 18.0, 20.0 Electrical Heater ( Back up ) Capacity (kw) 6 2, 3, 4, 6, 9 Capacity of Make up tank( SWHS with Heat Exchanger only ) (Ltrs) 5.0 5.0, NA Solar Flat Plate shall be BIS marked and as per IS :12933/2003 with amendment 1 to 3 Yes - Type of Cover Plate conforming to IS 12933/2003 Made up of Toughened Glass with thickness 4.00 mm minimum Made up of Toughened Glass with thickness 4.00 mm minimum Solar Transmittance for cover plate at normal Incidence (%) 92 - Material for Collector Box Aluminium Aluminium, CRCA Numbers of collectors 5 - Minimum Channel Section Thickness for sides ( For Al based) >/= 1.4 mm for aluminium based - Minimum Thickness of Sheet for Bottom ( For Al based) >/= 0.45 mm for aluminium based - Minimum Thickness of Sheet used as Support for Glass retaining ( For Al based) >/= 1.2 mm for aluminium based - Thickness of Sheet for entire body >/= 1.0 mm for aluminium based - CRCA Material Thickness >/= 0.91 mm for CRCA - Riser and Header assembly designed for working pressure Riser and Header assembly designed for working pressure 24.5 k pa tested for leakage at a minimum hydraulic pressure of 490 K pa - Number of absorber sheets per collector 1 - Numbers of Header Tubes 2 - Numbers of Riser Tubes 9 - Diameter of Header >/= 24.5 mm - 2/6 Tube (mm) Diameter of riser tube (in mm) >/= 11.5 mm - Thickness of Header Tube (mm) >/=0.71 - Thickness of Riser Tube (mm) >/= 0.56 mm - Material of Riser Header for Absorber Copper Only - Distanace Between Risers from center to center (mm) >/= 120 (mm) - Material of sheet for absorber Copper Copper Collector Box Insulation Back and sides - Thermal Resistance of Insulation in Square Degree for Back Face >/=0.96 W/Km - Thermal Resistance of Insulation in Square Degree for Side Face >/=0.47 W/Km - Gasket and Grommets shall confirm to IS 12933/2003 with latest amdt Yes - Material for Hot water storage Tank Mild Steel Mild Steel Name the Material if choose others Mild Steel - Non Pressure Type Hot water Storage Tank Yes - Position of Hot water tank Horizontal - Thickness of sheet of Hot water tank (mm) 2.5 - Hot water Tank Insulation Density ( High density PUF insulation for 32 kg meter cube or higher density (mm) >/=40 - Hot water Welding MIG - Coating Material for Hot water tank Polyster Epoxy Plus Balck Epoxy based Paint - Thickness of Coating (micron) 70 - 3/6 Tank stand Material Mild Steel - Size of Tank Stand (L x W x H ) Must be Greater Than 38 x 38 x 4 (mm3) Yes - Type of Heat Exchanger cage Type - Material for Heat Exchanger Stainless steel Stainless steel Thickness of tube of heat Exchanger, Minimum 22 SWG Yes - Heat Transfer Rate for heat Exchanger Must be greater than 0.24 sq meter per 100 LPD capacity - Numbers of Electrical Heaters ( Back Up Type ) provided 2 2, 5 Collector Stand Material Mild steel - Size of Collector Tank Stand (L x W x H ) Must be Greater Than 38 x38 x 4 (mm3) Yes - System Interconnecting Pipes material G.I Pipes as per IS: 1239 - if other mention the Material for interconnecting pipes NA - Size of interconnecting Pipes (mm) 25 - Tank test Pressure (bar) 1 - System Working Pressure (Bar) 5 - Inlet and Outlet Valve Yes - Temp Gauge( for Hot Water ) Yes - Gun Metal Strainer ( for Cold Water ) Yes - Water Meter Yes - Gasket for Flanges 3 mm thick gasket of neoprene - Electrical Back up Control panel Yes - 4/6 Make of Control Panel L&T - if others, mention the make of Control Panel L & T - Weight of solar water heater system (kg) 350 - CERTIFICATIONS Availability of Test Report as per IS : 6893-6 (1985) used for purcahse specification for Machine Tools, Part 6 Bench/Pillar type Drill Machine with latest amndmt.from Central Govt./NABL/ILAC acredited lab to prove confirmity to specification yes - Test Report No. SPRERI/SL/2015/703 - Test Report Date 22/12/2015 - Name of the Lab SPRERI - Address of the Lab VALLABH VIDHYANAGAR ANAND 388120 - Availability of Schematic Drawing Yes - Instruction Manual for installation, Repair and maintanance Yes - test teat1 true - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Amitkumar Chandulal Dave 360005, Saurashtra University Dolarrai Mankad Marg Kalavad Road 2 15

Printer

All in one Average Turn Over of Last 3 Years 31 Lakh (s) Experience with Gov. Required 3 Year (s) All In One ( 16 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Processor Processor Make Intel * Processor Generation 7th 7th Processor Intel Core i3-7100 (3.9 GHz, 3 MB Cache, 2 Cores) Intel Core i3-7100 (3.9 GHz, 2 Cores) Chipset Chipset Intel H110 * Graphics Graphics type Integrated * Graphic Card Description Intel® HD Graphics * Storage Type of Hard disk drive SATA SATA Hard Disk Drive Size (GB) 1000 1000 (or higher) Hard disk drive speed (RPM) 7200 * 1/4 RAM Type of RAM DDR4 * RAM Size (GB) 8 8 RAM Expandability Upto (GB) 32 32 Ram speed (MHz) 2400 * Operating System Operating system Windows 10 Professional Windows 10 Professional OS Certification Windows * Display Display Size (Inch) 19.5 19.5 Type of Display Non Touch Non Touch display resolution (Pixels) 1600 x 900 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes * Ports USB Port 2.0 (No.) 2 * USB Port 3.0 (No.) 4 * VGA Port Not-Available * HDMI Port Available * Thunderbolt Port (No.) Not-Available * Display Port Not-Available * Input Devices Keyboard Standard with USB Interface * Mouse Optical Scroll with USB Interface * Audio Integrated Stereo Sound with internal speakers & Mic. * Connectivity Wi-fi Connectivity 802.11 ac * Bluetooth Connectivity 4.0 or higher * LAN Port Integrated Gigabit Ethernet 10/100/1000 * Certification BIS Registration under CRS of Meity Yes * BIS Registration no - * Certifications Available Energy Star * ROHS Compliance Yes * Power Maximum Wattage 120 * 2/4 (Watts) Power Efficiency (%) Minimum 80 * Others Webcam HD * DVD R/W Available * Optical drive Integrated * Stand Standard * On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashishkumar Laxmanrao Hundekar 400060, Education Inspector of West Zone, Ismail Yusuf College Compound, Jogeshwari - east 16 15

lead acid battery Experience with Gov. Required 3 Year (s) Lead Acid Battery ( 6 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992 Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Stationary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationary Valve Regulated Lead Acid Batteries conforming to IS:15549/2005, Lead- Acid Storage Batteries 1/3 for Motor Vehicles with Light weight and High Cranking Performance conforming to IS:14257/1995, Lead- Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 2.0 Volt, 6.0 Volt, 12.0 Volt Material of container Hard Rubber Hard Rubber, Fibre Reinforced Plastics (FRP), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 150 1-300 Warranty (Years) 4 Years 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Charged * CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications * Volume of Electrolyte (ml) 6700 * Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. * No.of cells per Battery (No.) 6 Cells for 12 Volt battery * CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes * Address of the Lab BADDI, HARIYANA * Name of the Lab LUMINOUS POWER TECHNOLOGIES PVT. LTD. * Test Report No. 2511190ERA1 * Test Report Date 14/5/17 * Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing ISO 14001:2004 * 2/3 Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dipak Khushalchand Meshram 422004, near meri signal, dindori road, nashik 6 15

NEEDLES AND SYRINGES DESTROYER NEEDLES AND SYRINGES DESTROYER ( 300 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Purpose To destroy the used injection needles by instant electromelting process and to cut syringe tips manually using the appliance * Type Portable and electrical Portable and electrical Principle of operation Electro-melting type Electro-melting type CONSTRUCTION Suitable sliding tray shall be provided for collection of residue and destroyed syringe tips yes * Material of the Housing/enclosure Glass filled nylon ABS Plastic, Glass filled nylon Housing/enclosure shall be moulded type and shock proof yes * Provision to burn the needles and to cut the syringe tips shall be yes * 1/4 provided in the unit Manual cutter provided in the equipment Made of hardened blade of anti-corrossive SS material * Transformer winding Copper Copper FUNCTIONAL Number of needles of 1mm dia and 80mm length that can be destroyed in continuous operation of 5 minutes 20 * Sizes of injection needles of all kinds which can be destroyed Dia Ranging from 0.4mm to 1.6mm (26 SWG to 14 SWG) with length 12.5mm to 80mm Dia Ranging from 0.4mm to 1.6mm (26 SWG to 14 SWG) with length 12.5mm to 80mm ELECTRICAL Power supply 207V to 253V, 50Hz AC supply 207V to 253V, 50Hz AC supply, NA Power ON/OFF switch with indicator shall be provided YES YES, NA Rated power(Watts) 100 100.0 Shall be provided with fuse and power cord of min 3m length and earthing point YES YES, NA Manual of usage instructions To be supplied by the supplier * CERTIFICATIONS Availability of Certification for the product to ISO-13485-2009 from Govt approve Lab YES * Comply in general to IS:302Pt-1/1979 to ensure safe and reliable operation in normal use YES * Occupational health and safety certification from approved bodies as per OHSAS 18001-2007 YES * CE Certification from approved bodies false * TESTS & REPORTS Safety tests shall consist of marking, protection against electric NA * 2/4 shock, temperature rise, IR, Leakage current, HV, Stability and mechanical hazards, mechanical strength, constructional requirements, creepage distance and clearances, resistance to heat, fire and tracking as per IS:302Pt-1/79 Performance tests shall consist of capacity test as per clause 14 above, power consumption test at maximum load and ability to cut syringe tips YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kul Bhushan 160031, Government Medical College & Hospital Sector 32, Chandigarh, 160031 300 50

Tablets

shoe polish Experience with Gov. Required 3 Year (s) Shoe Polish ( 19000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Type and Certification Type Paste conforming to IS 1746 : latest Paste conforming to IS 1746 : latest, Liquid conforming to IS 12010 : latest ISI Marked No Yes, No CML Number na * Conformity to IS 1746 : latest Special Requirement for Defence Supplies for Paste NA Yes, No, NA Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes Yes, No Test Report Number 234782 * Test Report Date 14/2/2016 * Name of the Lab Chary lab * 1/3 Address of the Lab Delhi * Colour and Quantity Colour of Material Black * Quantity per Pack Size 40 gm 15 gm, 40 gm, 75 ml Packing Packing of Material in a Container Press Lid Metal Container (for Paste) Press Lid Metal Container (for Paste), Plastic Container fitted with in-built applicators (for Liquid) Number of Containers per Box 12 Any applicable numeric value * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Manish Singh Chauhan 482001, South Civil Lines, Home Guard and Civil Defense Headquarter, Jabalpur 19000 15

swachh bharat 10-12 litre waste container set Swachh Bharat 10-12 Litre Waste Container Set ( 3000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Product Description swachh bharat 10-12 litres waste container set * Selling unit set of 2 containers * Advertisement provided on the container for price competitiveness yes * Advertisement on containers (if provided) To be arranged by the manufacturer on their own for price competitiveness * Advertisement Coverage, (if provided) Durable Sticker on upper 2/3rd of the horizontal circum-area * Conformity of the advertisement on 2/3rd area of the Sticker as allowable under under relevant rules laws of India or ASCI (The Advertising Standards Council of India) * Two Silver stickers on Urban Local Body (ULB) * 1/4 the 1/3rd of theLower portion of the containers LOGO (to be provided by ULB) on one side and Swachh Bharat LOGO on the other side Stickers with instruction Dry waste on blue container and wet waste on green container * Pre - Dispatch Inspection (As advised by buyer) CIPET/RITES/Any other PSU in the field of Inspection * CONSTRUCTIONAL Colour in Set One Green and other Blue * Material Virgin HDPE Conforming to IS 7328 latest Virgin HDPE Conforming to IS 7328 latest Shape of the container Round * Top Diameter ( in mm) 250 * Holes at Bottom 1 no. of 10 mm dia with mesh 1 no. of 10 mm dia with mesh, 4 nos. of 2 mm dia each Rib at Bottom yes * Vertical Ribs at the outer surface yes * Containers must be un- breakable, Robust, Reusable and washable yes * Maximum Filler Content (%) not more than 2% * Maximum Ash Content, Conformity test as per Annex D of IS: 14887 (Latest) (%) Not mkore than 1% * UV Resistance, % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table 1- Cycle Number 2 (%) Minimum 50% * Lid without * Rim at top Yes * Handle without * DIMENSIONS Capacity of one Waste container unit (Ltr) 10-12 Ltr * Bottom Diameter (in mm) 200 * Overall Height (in mm) 300 * 2/4 Wall thickness of the container (in mm) Minimum 1 mm * Mass of one waste container unit (in grams) Min 270 grams * CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/IL AC acredited Lab to prove conformity to the specifications Yes * Test Report No 1182 * Test Report Date 04.08.2017 * Name of the Lab CIPET * Address of the Lab Bhopal * Conformance to the Drop test as per clause no 3 (10) of IS 3730 (latest) filled with 12 Kg sand in place of water Yes * Conformance to falling weight impact test as per clause A 6 of IS 2508 (latest) condition 1 Kg at one and half meter height yes * Embossing at outer bottom surface Manufacturer's Logo, Swachh Bharat Mission Logo and instruction "Not for sale' * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Kumar 132117, Municipal Committee Nilokheri, Near Gole Market 3000 15

Printer