Organization Name Tender Results

High Pressure Sodium Vapour Lamps (HPSV LAMPS) Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 3 Year (s) High Pressure Sodium Vapour Lamps (HPSV LAMPS) ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC High Pressure Sodium Vapour Lamp conforming to IS:9974(Pt.1)/1981 latest and IS:9974 (Pt.2)/1981 latest Yes - ISI marked Yes Yes If ISI market Yes declare CM/L No. (If No write NA) 2249755 - Type of lamps SON T without any coating Tubular shape SON T without any coating Tubular shape Ignitor External - Rated wattage of lamps 400 W 400 W Rated Luminous Flux 42300 for 400 W Lamp 5200 for 70 W Lamp, 12150 for 150 W Lamp, 22500 for 250 W Lamp, 42300 for 400 W Lamp CONSTRUCTIONAL "The lamp dimensions shall comply with the Yes - 1/3 requirements given in the relevant lamp data sheet in IS:9974/1981 Part II latest " Cap designation E40 Cap for 150W/250W/400W - Marking as per Cl. 5 of IS: 9974/1981 Part 1 latest Yes - "The insulation resistance between the shell of the bayonet cap and the contact shall be not less than 50 megohms." >/=50 M ohm - Rated Life of Lamps >/=5000 hours - WARRANTY Guaranteed period of replacement 1 year - REPORTS AND CERTIFICATION Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable. Test reports shall furnish on demand by buyer/consignee Yes - Test Report Number SRPL/17-18/01/GEN - Test Report Date 01/12/2017 - Name of Lab INTERNAL LAB DELHI - Address of Lab DELHI - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashfaque Parvez 483501, MAHARANI LAXMI BAI WARD, KATNI 100 15

High Pressure Sodium Vapour Lamps (HPSV LAMPS) Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 3 Year (s) High Pressure Sodium Vapour Lamps (HPSV LAMPS) ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC High Pressure Sodium Vapour Lamp conforming to IS:9974(Pt.1)/1981 latest and IS:9974 (Pt.2)/1981 latest Yes - ISI marked Yes Yes If ISI market Yes declare CM/L No. (If No write NA) NA - Type of lamps SON Ovoid shape with diffusing powder coating SON Ovoid shape with diffusing powder coating, SON C Ovoid shape without any coating, SON T without any coating Tubular shape Ignitor External - Rated wattage of lamps 250 W 250 W Rated Luminous Flux 5200 for 70 W Lamp 5200 for 70 W Lamp, 12150 for 150 W Lamp, 22500 for 250 W 1/3 Lamp, 42300 for 400 W Lamp CONSTRUCTIONAL "The lamp dimensions shall comply with the requirements given in the relevant lamp data sheet in IS:9974/1981 Part II latest " Yes - Cap designation E27 Cap for 70 W - Marking as per Cl. 5 of IS: 9974/1981 Part 1 latest Yes - "The insulation resistance between the shell of the bayonet cap and the contact shall be not less than 50 megohms." >/=50 M ohm - Rated Life of Lamps >/=5000 hours - WARRANTY Guaranteed period of replacement 1 year - REPORTS AND CERTIFICATION Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable. Test reports shall furnish on demand by buyer/consignee Yes - Test Report Number NA - Test Report Date NA - Name of Lab NA - Address of Lab NA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashfaque Parvez 483501, MAHARANI LAXMI BAI WARD, KATNI 200 15

High Pressure Sodium Vapour Lamps (HPSV LAMPS) Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 3 Year (s) High Pressure Sodium Vapour Lamps (HPSV LAMPS) ( 3000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC High Pressure Sodium Vapour Lamp conforming to IS:9974(Pt.1)/1981 latest and IS:9974 (Pt.2)/1981 latest Yes - ISI marked Yes Yes If ISI market Yes declare CM/L No. (If No write NA) 2249755 - Type of lamps SON T without any coating Tubular shape SON T without any coating Tubular shape Ignitor External - Rated wattage of lamps 150 W 150 W, 250 W Rated Luminous Flux 12150 for 150 W Lamp 5200 for 70 W Lamp, 12150 for 150 W Lamp, 22500 for 250 W Lamp, 42300 for 400 W Lamp CONSTRUCTIONAL "The lamp dimensions shall comply with the Yes - 1/3 requirements given in the relevant lamp data sheet in IS:9974/1981 Part II latest " Cap designation E40 Cap for 150W/250W/400W - Marking as per Cl. 5 of IS: 9974/1981 Part 1 latest Yes - "The insulation resistance between the shell of the bayonet cap and the contact shall be not less than 50 megohms." >/=50 M ohm - Rated Life of Lamps >/=5000 hours - WARRANTY Guaranteed period of replacement 1 year - REPORTS AND CERTIFICATION Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable. Test reports shall furnish on demand by buyer/consignee Yes - Test Report Number SRPL/17-18/01/GEN - Test Report Date 01/12/2017 - Name of Lab INTERNAL LAB DELHI - Address of Lab DELHI - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashfaque Parvez 483501, MAHARANI LAXMI BAI WARD, KATNI 3000 15

High Pressure Sodium Vapour Lamps (HPSV LAMPS) Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 3 Year (s) High Pressure Sodium Vapour Lamps (HPSV LAMPS) ( 500 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC High Pressure Sodium Vapour Lamp conforming to IS:9974(Pt.1)/1981 latest and IS:9974 (Pt.2)/1981 latest Yes - ISI marked Yes Yes If ISI market Yes declare CM/L No. (If No write NA) 2249755 - Type of lamps SON T without any coating Tubular shape SON T without any coating Tubular shape Ignitor External - Rated wattage of lamps 70 W 70 W Rated Luminous Flux 5200 for 70 W Lamp 5200 for 70 W Lamp, 12150 for 150 W Lamp, 22500 for 250 W Lamp, 42300 for 400 W Lamp CONSTRUCTIONAL "The lamp dimensions shall comply with the Yes - 1/3 requirements given in the relevant lamp data sheet in IS:9974/1981 Part II latest " Cap designation E27 Cap for 70 W - Marking as per Cl. 5 of IS: 9974/1981 Part 1 latest Yes - "The insulation resistance between the shell of the bayonet cap and the contact shall be not less than 50 megohms." >/=50 M ohm - Rated Life of Lamps >/=5000 hours - WARRANTY Guaranteed period of replacement 1 year - REPORTS AND CERTIFICATION Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable. Test reports shall furnish on demand by buyer/consignee Yes - Test Report Number AVILABLE IN DG LOCKER/TO BE PROVEDE ON DEMAND - Test Report Date 15.03.2013 - Name of Lab NATIONAL PHYSICAL LABORATORY - Address of Lab Dr. KSK MARG, NEW DELHI - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashfaque Parvez 483501, MAHARANI LAXMI BAI WARD, KATNI 500 15

Lamp Ballast for HPSV Lamps Average Turn Over of Last 3 Years 8 Lakh (s) Experience with Gov. Required 3 Year (s) Lamp Ballast For HPSV Lamps ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Ballast for HPSV lamps (Excluding Tubular Flourescent Lamps) conforming to IS: 15882:2009 and all the ballasts specified in the standard shall meet the requirements of IS: 15885(Part-1):2011 latest and IS: 15885(Pa rt-2/Section-9): 2011 latest Yes - ISI Marked Yes Yes ISI marked if yes declare CM/L Number If 'No' write NA YES - Ballast Wattage (in Watts) 250 W 250 W, 150 W Operating Voltage 220 Volt -240 Volt - Supply frequency (in Hz) 50 Hz +/-5% - CONSTRUCTIONAL Ballast constructional requirements as per Yes - 1/5 IS:15885 (Part 1) shall apply Winding material Copper wound - Supply current: At rated voltage, the supply current shall not differ by more than 10 percent from the value marked on the ballast when the latter is operated with a reference lamp Yes - Current wave form shall be as per Cl 9 of IS:15882:2009 latst Yes - Magnetic screening: The ballast shall be effectively screened against the influence of adjacent ferro- magnetic materials as pe Cl 10 of IS:15882:2009 latest Yes - Ballast setting: Power delivered at rated voltage as per Cl. 15.1 of IS:15882:2009 latest (Not Less than 95% and not more than 105% of the reference ballast when operated at the objective lamp voltage as given in IS:9974(Part2) Yes - Short Circuit current between 92% and 106% of rated voltage as per Cl. 15.2 of IS:15882:2009 latest Yes - Open circuit voltage between 92% and 106% of its rated voltage as per Cl. 15.3 of IS:15882:2009 latest Yes - Insulation resistance as per Cl. 11 of IS:15885 Part 1 : 2011 latest >/=2 M Ohm - Electric strength as per Cl. 12 of IS:15885 Part 1 : 2011 latest Yes - Rated Maximum operating temperature 105 deg C - 2/5 of ballast (Tw) (Ref. Cl. B.9.2 of IS:15885 part 1:2011 latest) Ballast shall pass the thermal endurance test for winding of ballast as per Cl.13 of IS:15885 Part 1 :2011 latest Yes - Ballast shall pass High voltage test 5 KV for 5 Seconds Yes - Watt Loss 26 Watts maximum for 250 W Ballast - Cold resistance at 20 deg. C (Tolerance: t+5%, 10%) - must declare -95 - Circuit power factor >/=0.85 - WARRANTY Guaranteed period of replacement 1 Year - CERTIFICATION Marking: Apart from IS requirement each ballast shall be marked with serial number of ballast, Watt Loss, Tw details Yes - Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable Yes - Test Report Number TU/IV-RD 11 52612A16 - Test Report Date 01.04.2016 - Name of Test Lab TuV Tord - Address of Test Lab 801, Raheja Plaza - 1, L.B.S. Marg, Ghatkopar (W), Mumbai - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashfaque Parvez 483501, MAHARANI LAXMI BAI WARD, KATNI 200 15 3/5

Lamp Ballast for HPSV Lamps Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 3 Year (s) Lamp Ballast For HPSV Lamps ( 2000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Ballast for HPSV lamps (Excluding Tubular Flourescent Lamps) conforming to IS: 15882:2009 and all the ballasts specified in the standard shall meet the requirements of IS: 15885(Part-1):2011 latest and IS: 15885(Pa rt-2/Section-9): 2011 latest Yes - ISI Marked Yes Yes, No ISI marked if yes declare CM/L Number If 'No' write NA NA - Ballast Wattage (in Watts) 150 W 150 W Operating Voltage 220 Volt -240 Volt - Supply frequency (in Hz) 50 Hz +/-5% - CONSTRUCTIONAL Ballast constructional requirements as per Yes - 1/4 IS:15885 (Part 1) shall apply Winding material Copper wound - Supply current: At rated voltage, the supply current shall not differ by more than 10 percent from the value marked on the ballast when the latter is operated with a reference lamp Yes - Current wave form shall be as per Cl 9 of IS:15882:2009 latst Yes - Magnetic screening: The ballast shall be effectively screened against the influence of adjacent ferro- magnetic materials as pe Cl 10 of IS:15882:2009 latest Yes - Ballast setting: Power delivered at rated voltage as per Cl. 15.1 of IS:15882:2009 latest (Not Less than 95% and not more than 105% of the reference ballast when operated at the objective lamp voltage as given in IS:9974(Part2) Yes - Short Circuit current between 92% and 106% of rated voltage as per Cl. 15.2 of IS:15882:2009 latest Yes - Open circuit voltage between 92% and 106% of its rated voltage as per Cl. 15.3 of IS:15882:2009 latest Yes - Insulation resistance as per Cl. 11 of IS:15885 Part 1 : 2011 latest >/=2 M Ohm - Electric strength as per Cl. 12 of IS:15885 Part 1 : 2011 latest Yes - Rated Maximum operating temperature 105 deg C - 2/4 of ballast (Tw) (Ref. Cl. B.9.2 of IS:15885 part 1:2011 latest) Ballast shall pass the thermal endurance test for winding of ballast as per Cl.13 of IS:15885 Part 1 :2011 latest Yes - Ballast shall pass High voltage test 5 KV for 5 Seconds Yes - Watt Loss 19 Watts maximum for 150 W Ballast - Cold resistance at 20 deg. C (Tolerance: t+5%, 10%) - must declare +5%, 10% - Circuit power factor >/=0.85 - WARRANTY Guaranteed period of replacement 1 Year - CERTIFICATION Marking: Apart from IS requirement each ballast shall be marked with serial number of ballast, Watt Loss, Tw details Yes - Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable Yes - Test Report Number 245455 - Test Report Date 2-2-2010 - Name of Test Lab MSME OKHLA - Address of Test Lab OKHALA INDUSTRIAL ESTATE NEW DELHI - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashfaque Parvez 483501, MAHARANI LAXMI BAI WARD, KATNI 2000 15 3/4

stapler pin Stapler Pin ( 50 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Material Material of the Pin Steel Any applicable text(s) Size Size Designation 24/6 * Crown Size (mm) 5 Any applicable numeric value Dimension Packing Number of Pins in a strip (Nos) 50 1-100 Number of strips in a box (Nos) 20 1-100 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJEEV KUMAR 110002, 6th Level, C Wing, Delhi Secretariat, IP Estate, 50 15

paper or eyelet punches Paper Or Eyelet Punches ( 25 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Type and Material Material Steel * Number of Hole Single hole Single hole, Two hole with puching distance 80mm Dimension Punching Diameter (mm) 5.5 5.5, 6, 7 Minimum Distance from Paper edge to the Center of Punch (mm) 10 * Physical Characteristics Capacity of Punch-80 GSM Paper (min) (Nos) 10 10, 30, 50, 100, 200, 300 Spring Loaded and Retractable Yes * Removable chip tray yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1/2 1 RAJEEV KUMAR 110002, 6th Level, C Wing, Delhi Secretariat, IP Estate, 25 15

Diaries-printed-plain- register- Diaries-printed-plain- Register- ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Type Type of Diaries Registers PEON BOOK * Certification Paper Conforming to Indian Standard IS 1848:latest * Cover Board Conforming to Indian Standard IS 4664:latest * Paper Size Conforming to Indian Standard IS 1064:latest * Dimension Dimension of Paper (Length X width) (mm X mm) 176 X 250 148 X 210, 176 X 250, 216 X 279, 297 X 210, 330 X 203, 330 X 210, 370 X 250, 420 X 320 Dimension of Cover (Length X Width) (mm X mm) 210 X 297 160 X 215, 210 X 297, 310 X 220, 340 X 220, 380 X 260, 430 X 330 Grammage (GSM) Grammage of Paper (gsm) 85 60, 65, 70, 75, 80, 85, 90 Grammage of Cover Paper (gsm) 150 150-250 1/2 Colour Colour of Pages Sheets white * Colour of Cover Blue * Physical Characteristics Brightness of Paper (%) 90 72-95 Smoothness of Paper (Bendtsen) (ml/min) 150 120-280 Opacity (%) 90 80-95 Number of Pages Number of Pages/Sheets 350 50-400 Binding Type of Binding Hardcover Cloth Bound Softcover Cloth Bound, Hardcover Cloth Bound Content Content and Desciption General Format (MOP Rajya Sabha Secretariat) * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJEEV KUMAR 110002, 6th Level, C Wing, Delhi Secretariat, IP Estate, 20 15

pen drive or flash drive Pen Drive Or Flash Drive ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Storage capacity (GB) 8 8 Read speed (MB/sec) 50 * Write speed (MB/sec) 20 * Interface USB 2.0 USB 2.0, USB 3.0 OS Supported YES * Auto Detection facility Yes * LED Indicator No * Color RED * Shape RECTANGLE * Height (mm) 24 * Width (mm) 12 * Weight (gms) 24 * Body material PLASTIC * Cover Without cap * Neck strap Without strap * Warranty (Year) 1 1 1/2 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJEEV KUMAR 110002, 6th Level, C Wing, Delhi Secretariat, IP Estate, 10 15

electrical box extension Electrical Box Extension ( 10 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC No. of Sockets - 6 Pin 16 Amp. (In Numbers) 0 0, 1, 2, 3 No. of Sockets - 5 Pin 6 Amp.(In Numbers) 4 0, 3, 4, 5 No. of 16 Amp Switches (in Nos) 0 0, 3 No. of 6 Amp Switches (in Nos) 4 0, 5 No. of cores in the cable (Nos) 2 2, 3 Length of cable with Extension Box (In Mtrs) 1.5 Metre 1.5 Metre, 3.0 Metre, 5.0 Metre CONSTRUCTIONAL Conformity of Switches to IS:3854/1997 Yes * ISI Marked switch Yes * Conformity of Socket to IS:1293/2005 Yes * 1/2 ISI Marked Socket Yes * Material of Box Poly Carbonate * PVC insulated and sheathed flexible cable with copper conductor to IS:694 Yes * Conductor Size (Sq- mm) as per IS:694 Yes * Recoiling of cord No * Input Plug Rating (AMP) 6 Amp. * Nos of pin in the Input plug (Nos) 3 Pin * FUNCTIONAL Over all Power rating of Extension Box (K Watt) shall comply with No. of Sockets and Ratings Yes * Power ON indicator Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJEEV KUMAR 110002, 6th Level, C Wing, Delhi Secretariat, IP Estate, 10 15

food service glasses and cut glass dishes tumblers bowls mugs cups saucers vases Food Service Glasses And Cut Glass Dishes Tumblers Bowls Mugs Cups Saucers Vases ( 12 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Glassware conforms to As Per IS:1961 Latest Yes * Item Cut glass -Tableware Type Cups and saucers Drinking Glass/Tumblers, Stemwares, Dishes, Bowl, Jugs, Mugs, Cups and saucers, Vases Designe Colour of Cut glass Transparent * Handle With * Artistic design, Pattern and Logo Machine Crafted Machine Crafted, Moulded crafts, Hand Crafted Lid Without With, Without Inner side of glasswares Plane surface Crafted surface, Plane surface Spout Without With, Without Material Types of Glass Borosilicate glass Soda glass, Crystal (Leaded) Glass, 1/3 Borosilicate glass, Coloured glass Grade of Glass Material Food Grade Glass * Dimension Nominal Capacity, ml (ml) 200 * Min. Thickness, mm (mm) 1.5 * Top diameter/width, mm (mm) 60 * Bottom diameter/width, mm (mm) 40 * Overall height, mm (mmm) 70 * Weight of single piece, gm (gm) 55 * Performance Suitable for microwave oven false true, false Temperature difference withstand capability for Thermal shock, deg.C (deg.C) 40 * Set No. of pieces in a set (Nos.) 6 * Test Report Availability of Test Reports from Central Govt/NABL/ILAC accredited Lab covering all the declared parameters as per IS specification false * Test Report No 755293 * Test Report Date 31032015 * Name of Lab BHARAT * Address of Lab INDIA * Test furnished by Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJEEV KUMAR 110002, 6th Level, C Wing, Delhi Secretariat, IP Estate, 12 15 2/3

folder binding accessories- dak pad, file board- flap Folder Binding Accessories- Dak Pad, file Board- Flap ( 300 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Type Type of Binder File Board Binder File Board Binder, Dak Pad, Dak Pad (Four flapper file) Test Report Details Availability of type test Report Yes Yes, No Test Report number and Date 0 DATED 06/02/2016 * Name and Address of Laboratory NEELGAGAN, BADAPUR NEW DELHI * Board Details Material Used for Board conforms IS:4664 Latest * Lamination of Board Paper Liner Paper Liner, Raxine Size Size of flap (Width x Length) (mm x mm) 230 x 342 75 x 520, 230 x 342, No flap Size of File Board (Width x length) (mm x mm) 250 x 345 250 x 345, 250 x 370, 260 x 370 Physical Characteristics Corner Protection false true, false Covering of Flap Cloth Coated Paper Cloth Coated Paper, Rexine Coated Paper, 1/2 NA Binding Tape Details Binding tape material Cotton Cotton, Synthetic Binding tape Corner Protection false true, false * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJEEV KUMAR 110002, 6th Level, C Wing, Delhi Secretariat, IP Estate, 300 15

Report Cover

rags-duster cotton khadi Rags-duster Cotton Khadi ( 150 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conformity to IS:3777/1994 Latest Yes * Test Report Details Availability of Test Report from NABL ILAC accredited or Central Government Lab to prove conformity of products to the specification No YES, No Test Report Number 124 * Test Report Date 15/06/2016 * Name of the Lab DELHI * Address of the Lab DELHI * Material Material Cotton Khadi Bleached * Size and Mass Size (cm X cm) 30 X 30 30 X 30, 51 X 46, 61 X 61 Mass (Grams/Sq. Meter) 170 * * Bold specifications are the golden parameters. 1/2 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJEEV KUMAR 110002, 6th Level, C Wing, Delhi Secretariat, IP Estate, 150 15

Notesheet(Azurelaid) Notesheet(Azurelaid) ( 50 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to IS: 1848:Latest Yes Yes Eco Mark No Yes, No Material Raw Material Furnished (Eco Mark) Pulp containing not less than 60% by weight of pulp made from material other than bamboo, hardwoods, softwoods and reed Pulp containing not less than 60% by weight of pulp made from material other than bamboo, softwoods and reed, Recycled paper and paper board must be made from 100% waste paper Dimension and GSM Size of the Paper Notesheet * Dimension of the Paper (W X L) (mm X mm) 210 X 335 * GSM (GSM) 75 75, 80, 90, 100 Colour color Green * Physical Characteristics Opacity (%) 90 * Tensile Index MD (Nm/g) 40 * 1/2 Tensile Index CD (Nm/g) 30 * Margin Line on one side of both sides from same edge (mm) 4.4 * Packing Number of Sheets per Pad (Nos) 100 Sheet 100 Sheet * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJEEV KUMAR 110002, 6th Level, C Wing, Delhi Secretariat, IP Estate, 50 15

Gel Pen

Printer or photo Copier Paper Printer Or Photo Copier Paper ( 100 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes * Test Method as per IS: 1060 Yes * Size Size and Dimension of The Paper (W X L) in mm 297 X 420 210 x 297, 297 X 420 Size of the Paper A3 A3 GSM of Paper 75 75 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 85 85 Tensile Index MD in Nm/g 40 * Tensile Index CD in Nm/g 25 * Opacity in % 85 * Tear Index (Avg) in Nm.m²/g 4.5 * 1/2 Smoothness for both sides (Bendtsen) in ml/min 300 * Thickness in µm 95 * Moisture in % 4.5 * Stiffness MD 2 * Stiffness CD 1 * Surface Strength Dennison (Wax Pick) >= 12 A 12A * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJEEV KUMAR 110002, 6th Level, C Wing, Delhi Secretariat, IP Estate, 100 15

domestic electrical kettles Domestic Electrical Kettles ( 2110 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Indian standard for electric kettle Conforming to IS : 367/1993 Latest Yes * BIS Marking false * CML NO 0 * Material Material of Kettle Stainless steel Stainless steel Capacity Capacity (Litre) 1.5 1.5 Operating Condition Operating voltage (Volt)230+/- 10% Yes * Rated Input (KW) 1.5 1.5 Time to BOIL one litre of water (Minutes) 2 * Minimum Quantity of water that can be boiled (ml) 1000 * Inbuilt Component Thermostat Without With, Without Thermostat No Yes, No, NA 1/3 adjustable Safety Safety Locking Lid Yes * Test Report Availability of the type Test Report from central govt./NABL/ILAC accreadited lab. to prove conformity to the specification. Yes * Type test certificate No. 1234 * Type test certificate Date 08022015 * Name of the Lab. prestige * Address of the Lab. mumbAI * Test Report shall be furnish to Buyer on Demand Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 ISHWAR CHANDRA NAWANI 226014, SANJAY GANDHI POSTGRADUATE INSTITIUTE OF MEDICAL SCIENCES LUCKNOW 226014 2110 30

Printer Or Photo Copier Paper ( 200 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes * Test Method as per IS: 1060 Yes * Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297, 297 X 420 Size of the Paper A4 A4, A3 GSM of Paper 75 75, 80, 90, 95 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 85 80-95 Tensile Index MD in Nm/g 40 * Tensile Index CD in Nm/g 25 * Opacity in % 85 * Tear Index (Avg) in Nm.m²/g 5 * 1/2 Smoothness for both sides (Bendtsen) in ml/min 150 * Thickness in µm 95 * Moisture in % 4 * Stiffness MD 2 * Stiffness CD 1 * Surface Strength Dennison (Wax Pick) >= 12 A NA * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJEEV KUMAR 110002, 6th Level, C Wing, Delhi Secretariat, IP Estate, 200 15

automatic line voltage corrector or step type auto transformer Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Automatic Line Voltage Corrector Or Step Type Auto Transformer ( 7 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped GENERIC Conforming to IS:8448 latest Yes * Rating in KVA 5.0 KVA 5.0 KVA ISI Marked No Yes, No ISI Marked if Yes CM/L No. (If No write NA) NA * Type of winding Aluminium Copper, Aluminium Input Single Phase sine wave (160V-260V) Single Phase sine wave (160V-260V), single Phase Sine wave (120V-280v) Display Type of Meter Digital Volt Meter analog Volt Meter, Digital Volt Meter CONSTRUCTIONAL Mounting Type Wall mounting * 1/3 Current rating of the Relay/contactors (Amp) Conforming to IS:8448 latest * Overall weight of ALVC (Kg) 7 * Provision of power supply cord/terminal as applicable for input and output as per IS:8448 Yes * FUNCTIONAL Output Single Phase sine wave (210V-250V) * Overall efficiency of ALVC (%) >/= 95% * The product shall conform to the acceptance tests as per Cl. 12.1.1 of IS:8448 latest Yes * CERTIFICATIONS Availability of Type Test Report from Central Govt. NABL/ILAC Accredited lab to prove conformity to the Specification IS:8448 latest Yes * Type Test report No. 1111259 * TTC report date 02/11/2012 * Name of Lab NATIONAL TEST HOUSE(NR) * Address of Lab KAMLA NEHRU NAGAR GHAZIABAD * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Manish Agrawal 302020, B-2, By-Pass, Shipra Path Agarwal Farm, Mansarovar, Jaipur-302020. 7 15

acute care monitoring units and related products- patient monitors Acute Care Monitoring Units And Related Products-patient Monitors ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values NEW SET Type of Monitor Preconfigured/Non Modular - Functional Requirements: Operates from mains voltage or from internal rechargeable battery Operator can set audio visual alarm levels for low or high levels of each parameter independently Allows display of single, 3 lead ECG or simultaneous display of at least 5 waves ECG selected from up to 12 points Display to be digital of all active parameters and trace display for at least three selectable parameters Yes - Clinical Purpose: Designed to continuously measure and display multiple vital physiological YES - 1/7 parameters of adults, newborn and premature infants, especially those under critical care Continuous display on screen of neonatal or infant ECG, respiration and heart rates, invasive/non-invasive blood pressure, body temperature and SpO2 Yes - Patient monitor offered with option to monitor parameter(s): EtCO2, IBP, Cardiac Output EtCO2, Cardiac Output Number of leads for ECG 5 3, 5, 12 Screen Size 12 8, 12, 14, 15, 17 Weight 7 - ECG patient connectors that are sterilisable and reusable are acceptable though reusable cables that attach to disposable connection patches are preferred Multichannel (up to 12 leads) ECG measurement and selectable display of upto 5 leads at a time Temperature probe to be reusable, external skin contact type; Temperature range at least 30 to 40 deg C, minimum gradation (1/10) deg C/Heart rate measurement range to be at least 30 to 250 bpm, with accuracy better than ± 5 bpm and minimum gradation 1 bpm/SpO2 measurement range at least 40-70 % and 70 to 99 %, with accuracy better than ± 1% for 40-70 range and better than ± 3% for 70-99 range and minimum gradation 1%/Blood Yes - 2/7 pressure monitoring range at least 30 to 300 mmHg, minimum gradation 1 mmHg Respiration rate measurement range at least 0 to 100 bpm, minimum gradation 1 bpm/Trend display of each parameter over at least previous 24 hours to be selectable ECG patient connectors that are sterilisable and reusable are acceptable though reusable cables that attach to disposable connection patches are preferred Multichannel (up to 12 leads) ECG measurement and selectable display of upto 5 leads at a time Temperature probe to be reusable, with accuracy better than ± 1% for 40-70 range and better than ± 3% for 70-99 range and minimum gradation 1%/Blood pressure monitoring range at least 30 to 300 mmHg, minimum gradation 1 bpm/Trend display of each parameter over at least previous 24 hours true - 3/7 to be selectable/TFT Screen User Interface Manual through knob or key board Manual through knob or key board, Through touch Screen, remotely operated Audio Visual alarms high and low levels for each parameter (operator variable settings), sensor/wire probe disconnected, low battery - Case is to be hard and splash proof/Display must allow easy viewing in all ambient light levels/Cable connectors to be designed so as fit correct socket only Yes - Noise (in dB) < 50 - Heat Dissipation: Should maitain nominal Temp and the heat should be disbursed through adequate arrangement - Mobility & Portability mobile and portable in protective case supplied for clean storage and safe transport. - Power supply replaceable and rechargeable Battery Operated (Min one hour operation support in the event of power failure) 220 volt, 50 Hz AC, replaceable and rechargeable Battery Operated (Min one hour operation support in the event of power failure), Replaceable And Rechargeable Battery Operated (Min One Hour Operation Support In The Event Of Power Failure) and 220 Volt, 50 Hz AC both Mains cable to be at least 3m length YES - Accessories & Spare Parts: pairs of ECG cable 5 sets of ECG connection electrodes 1 unit each of reusable SPO2 probe(Adult/Paediatric) 1 unit of SPO2 probe(Neo natal) 2 pairs of ECG cable 5 sets of ECG connection electrodes 1 unit each of reusable SPO2 probe(Adult/Paediatric) 1 unit of SPO2 probe(Neo natal) 2 4/7 units of NIBP cuffs for adult 2 units of NIBP cuffs for Paediatric 1 unit each of skin and rectal Temperature probe units of NIBP cuffs for adult 2 units of NIBP cuffs for Paediatric 1 unit each of skin and rectal Temperature probe Operating condition: apable of operating continuously in ambient temperature of 0 to 50 deg C and relative humidity of 15 to 90% in ideal circumstances - Should be FDA CE/BIS approved product US FDA, European CE, BIS US FDA, BIS - Electrical safety conforms to standards for electrical safety IEC-60601-1/- Shall meet IEC-60601-1-2 (General requirements for safety - electromagnetic compatibility)/-Also conforms to IEC 60601-2- 27 (Particular requirements for the safety of electrocardiographic monitoring equipment) - Manufacturer supplier should have ISO certificate for quality standard/- Shall meet IEC 60601-2-49 multi function patient monitoring equipment standard requirement Yes - Seller to perform supply, installation, safety & operation checks and training before handover of the product [Training of users in operation and basic maintenance shall be provided] Yes - Warranty Comprehensive warranty of 3 years with free servicing ( min 3/year) during warranty - 5/7 Operating manuals, service manuals, other manuals/documents Advanced maintenance tasks required shall be documented User, technical and maintenance manuals to be supplied in English language. List to be provided of equipment and procedures required for local calibration and routine maintenance List to be provided of important spares and accessories, with their part numbers. Certificate of calibration and inspection to be provided. - Recommendations or warnings Any recommendations for best use and supplimentary warning for safety to be declared - Details of Item and test reports Availability of Test Report from Central Govt/NABL/ILAC/Any OPCW accredited lab to prove conformity to specification YES - Test report (if indicated as available) to be furnished to buyer on demand YES - Test report No & date CE 01-07-2016 - Name and address of the Lab: Medtronic - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajendra Kumar Chopra 110095, Guru Teg Bahadur Hospital, Dilshad Garden 5 35

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 60 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 12A Black Original LaserJet Toner Cartridge * Corresponding Part number/code Q2612AC * Printer Model number/numbers for which Cartridge is suitable HP Laserjet 1010, HP LaserJet 1012 Printer, HP LaserJet 1015 Printer, HP LaserJet 1020 Plus Printer, HP LaserJet 1020 Printer, HP * 1/3 LaserJet 1022n Printer, HP LaserJet M1005 MFP Printer, HP LaserJet M1319f MFP Printer, HP LJ3050 All-in- One Printer, HP LJ3052 All-in-One Printer, HP LJ3055 All-in-One Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2000 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Manoj Kumar Ranga 110006, 5th Floor, ISBT Building kashmere Gate 60 15

OEM Cartridge/Consumable Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 15 Year (s) OEM Cartridge/Consumable ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 36A Black Original LaserJet Toner Cartridge * Corresponding Part number/code CB436AC * Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1522n MFP Printer, HP LaserJet M1522nf MFP Printer, HP LaserJet P1505 Printer, HP LaserJet P1505n Printer * 1/2 Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2000 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Manoj Kumar Ranga 110006, 5th Floor, ISBT Building kashmere Gate 20 15

refuse compactor Average Turn Over of Last 3 Years 1545 Lakh (s) Experience with Gov. Required 3 Year (s) Refuse Compactor ( 14 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Vehicle Engine Capacity (cc) 3783 * Model No. - * Pay Load Capacity (Tonn Load) 9 8, 8.15, 8.32, 9, 11 Type of Fuel Diesel Diesel, CNG Vehicle Emission Compliance BS-IV BS-IV Colour (Cabin) of the Vehicle - * Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hours) 9.13 Any applicable numeric value Max Engine BHP 125 Any applicable numeric value 1/6 Max Engine Torque (N-m) 400 Any applicable numeric value Top Speed (Kmph) 80 Any applicable numeric value Braking Distance (m) 6 Any applicable numeric value Gradeability of Vehicle (%) 23 Any applicable numeric value Engine Aspiration System TurboCharged Natural, Supercharged, TurboCharged, Turbocharged Intercooled Type of chassis for Vehicle - * Fuel Tank Capacity (Ltrs) 225 Any applicable numeric value Type of Cabin - * Load Body Type - * Trailer Type - * Ground Clearance (mm) 225 Any applicable numeric value Floor Area (mm2) 10300000 Any applicable numeric value Wheel Base (mm) 3600 Any applicable numeric value Kerb Weight (Kg) 3645 Any applicable numeric value Gross Vehicle Weight (Kg) 11990 Any applicable numeric value Type of Vehicle Tyre Bias Tube, Tubeless, Radial, Bias No. of Front Tyre 2 Any applicable numeric value No. of Rear Tyre 4 Any applicable numeric value Size Of BIS marked Front Tyre with Ply Rating - * Size of BIS marked Rear Tyre with Ply Rating - * Vehicle Transmission System Manual Automatic, Manual Drive Axle Rear Front, Rear, All No of Axle 2 Any applicable numeric 2/6 value Axle Configuration ( No of Outside Tyre x No of Driving Tyre) - * Type of Front Axle and Suspension System - * Type of Rear Axle and Suspension System - * No. of Speed Forward Gears 6 Any applicable numeric value Type of Steering Power Operated Manual, Power Operated Turning Radius (mm) 7400 Any applicable numeric value Type of Clutch - * Type of Front Brakes - * Type of Rear Brakes - * CERTIFICATION Vehicle Certification ARAI/VRDE/ICAT No - * Constructional Parameters Overall Length (mm) 6630 Any applicable numeric value Overall Width (mm) 2270 Any applicable numeric value Overall Height (cabin) (mm) 2470 Any applicable numeric value Type and Location of Shock Absorbers - * Container Capacity(excluding hopper) (m3) 7 7 Color (Container) - * Container Body Material - * Roof panel thickness (mm) 4 Any applicable numeric value Side Panel thickness (mm) 4 Any applicable numeric value Floor thickness (mm) 4 Any applicable numeric value Hopper Capacity (m3) 1.2 Any applicable numeric value Sewager Tank volume (Ltrs) 160 Any applicable numeric value Compression ratio 0.5 Any applicable numeric value 3/6 Universal bin lifting system Yes Yes Dumper placer arms system Yes Yes Tip cart/bin cart lifing system Yes Yes Discharge model Horizontal Ejection Horizontal Ejection Control Manual Hydraulic control Electrically Hydraulic control, Manual Hydraulic control Emergency Stop Button Hopper's Both Sides Hopper's Both Sides Alarm (buzzer) true true, false Stabilizers type - * Power take Off (PTO) type - * PTO shaft rotation for hydraulic pump maximum pressure generation (rpm) 1500 Any applicable numeric value Manufacturer of Hydraullic system - * Replaceble filter provided in the hydraulic system return line Yes Yes Maximum pressure developed by hydraulic pump (bar) 240 Any applicable numeric value Maximum Hydraulic fliud circulation rate of hydraulic pump (lpm@rpm) 83 Any applicable numeric value Performance Parameters Lift time (second) 30 Any applicable numeric value Work cycle time (second) 40 Any applicable numeric value Discharge time (second) 25 Any applicable numeric value Lift capacity (Kg) 1000 Any applicable numeric value Max compression force (Tonnes) 340 Any applicable numeric value Warranty Time (Months) 12 12, 24, 36 Warranty Distance 50000 100000.0, 40000.0, 4/6 (km)unlimited during warranty period 50000.0, 75000.0, 80000.0 No. of Free Service 3 Any applicable numeric value * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sham Laxmanrao Poshatti 410206, PMC Building, Near ghokhale Hall, old panvel 14 30

All in one All In One ( 3 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Processor Processor Make Intel * Processor Generation 7th 6th, 7th, 8th Processor Intel Core i5-7500 (3.4 GHz, 6 MB Cache, 4 Cores) * Chipset Chipset Q270 * Graphics Graphics type Integrated * Graphic Card Description NA * Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 500 500, 1000, 2000 (or higher) Hard disk drive speed (RPM) 7200 * RAM Type of RAM DDR4 * RAM Size (GB) 4 4, 8, 16, 32 RAM Expandability 32 8, 32, Not- 1/3 Upto (GB) Available Ram speed (MHz) 2400 * Operating System Operating system Windows 10 Professional Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows * Display Display Size (Inch) 21.5 18-27 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes * Ports USB Port 2.0 (No.) 2 * USB Port 3.0 (No.) 4 * VGA Port Not-Available * HDMI Port Not-Available * Thunderbolt Port (No.) Not-Available * Display Port Available * Input Devices Keyboard Standard with USB Interface * Mouse Optical Scroll with USB Interface * Audio Integrated Stereo Sound with internal speakers & Mic. * Connectivity Wi-fi Connectivity 802.11 ac * Bluetooth Connectivity 4.0 or higher * LAN Port Integrated Gigabit Ethernet 10/100/1000 * Certification BIS Registration under CRS of Meity Yes * BIS Registration no - * Certifications Available Energy Star * ROHS Compliance Yes * Power Maximum Wattage (Watts) 180 * 2/3 Power Efficiency (%) Minimum 80 * Others Webcam HD * DVD R/W Available * Optical drive Integrated * Stand Standard * On Site OEM Warranty (Year) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 CHAYA KULKARNI 580005, O/o THE STORE PURCHASE OFFICER, KRISHINAGAR UNIVERSITY OF AGRICULTURAL SCIENCES DHARWAD 3 15

Ball Point Pen

Printer

Desktops

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 45 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand Samsung * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number Samsung MLT-D101S Black Toner Cartridge * Corresponding Part number/code MLT-D101S/XIP * Printer Model number/numbers for which Cartridge is suitable ML-2161, SCX-3401, ML- 2166W, SCX-3046W * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 * 1/3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pawan Kumar 110054, room no 171 Tishazari court first floor 45 15

Desktops Desktops ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 6th 6th Processor Intel Celeron G3930 (2.9 GHz, 2MB Cache, 2 Cores) Intel Celeron G3930 (2.9 GHz, 2 Cores) Motherboard Chipset Intel H110 As per GeM Catalogue. Expansion Slots (PCIe x 1) (Number) 1 - Expansion Slots (PCIe x 4) (Number) 0 - Expansion Slots (PCIe x 16) (Number) 0 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre-Loaded) DOS DOS RAM Type of RAM DDR 4 - RAM Size (GB) 4 4, 8, 16, 32 (or higher) RAM Expandability upto (GB) 16 16, 32, 64 (or higher) 1/4 RAM Speed (MHz) 2133 - Storage Hard Disk (GB) 500 500, 1000, 2000 (or higher) Cabinet Cabinet Tower - Cabinet Volume (Litres) - - Internal Bays 1 - External Bays (Number) 0 - DIMM Slots (Number) 2 - Connectivity Wireless NA - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 2 - USB Port 3.0 (Number) 2 - Serial Port true - Parallel Port false - VGA true - HDMI false - Display Port false - Monitor Monitor Size (INCHES) 18.5 18.5, 19.5, 21.5, 24, 27 (or higher) Monitor Resolution (PIXELS) 1366x768 1366x768, 1920x1080, 3200x1800, 3840 x 2160, 1440 x 900, 1600 x 900 Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive N/A - Internal Speaker false - On Site OEM Warranty (Year) 3 3, 5 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity 2/4 S.No. Consignee Address Quantity Delivery Days 1 Ritesh Patidar 313001, Nagar Nigam Udaipur, Town Hall Surajpole, Udaipur. 2 15

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 30 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Specification Product Class OEM * Brand HP * Type of Cartridge/Consumable Toner * Colour of Cartridges/Consumable s Black * Ink/Toner/Drum Model number HP 78A Black Original LaserJet Toner Cartridge * Corresponding Part number/code CE278AC * Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1536dnf MFP Printer, HP LaserJet P1566 Printer, HP LaserJet P1606dn Printer * Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) 2100 * 1/3 for colour (Numbers) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pawan Kumar 110054, room no 171 Tishazari court first floor 30 15

Desktops

Line Intractive UPS with AVR Line Intractive UPS With AVR ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 1.0/168 1.0/168 Technology MOSFET-PWM MOSFET-PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz Degree of protection IP-21 IP-21, IP 20 Inverter Efficiency (%) >/= 60% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year 1 year, 3 Years Warranty for Line Interactive UPS 1 Year 1 Year, 2 Years, 5 Years, 3 Years Installation and commissioning instructions No - CONSTRUCTIONAL Type of enclosure Mild steel - AC out put for printer (not through inverter) Yes Yes, No 1/4 Inverter out put socket AC out put for printer (not through inverter) 2 Three pin 2 Three pin, 3 Three pin, Hard wiring, Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) - - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes - 2/4 Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date - - Name Of Lab - - Address of Lab - - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Not applicable presently - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ritesh Patidar 313001, Nagar Nigam Udaipur, Town Hall Surajpole, Udaipur. 2 15

Multifunction Machines

Multifunction Machines

Meeting Table

Drinking Water Cooler

chairs-office

school administration automation software Average Turn Over of Last 3 Years 50 Lakh (s) Experience with Gov. Required 3 Year (s) School Administration Automation Software ( 2000 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values BASIC INFORMATION OF SCHOOL ADMINISTRATION & AUTOMATION SOFTWARE(GOLDEN) Type of Software Software, Appliance Software, Appliance Software Domain School, College, Universi ty, Other Educational Institutions School, University, Other Educational Institutions Number of users upto 100, upto 200, upto 300, upto 400, upto 500, upto 800, up to 1000, upto 5000, more than 5000 upto 100, more than 5000 Type of License subscription, perpetual subscription, perpetual, Renewal of licence for one year Name of Software iWeb Integrated University Management System - IUMS™ * Name of the OEM iWeb Technology Solutions Pvt.Ltd. * 1/9 OEM Model/Part No IUMS™ 4.0 * Software Description Campus Automation Software * Software Version 4.0 * Date of Launch of Version 1st October 2010 * FEATURES & FUNCTIONALITY PARAMETERS OF SCHOOL ADMINISTRATION & AUTOMATION SOFTWARE(GOLDEN) Deployment option In Premise, Private Cloud, SAAS cloud In Premise, SAAS cloud Student management module true true, false Smart card integration Management true true, false SMS module true true, false Payment Gateway Integration Modules true true, false Administration modules true true, false e-Learning Management system false true, false Online Payment Module true true, false Parent/guardian module true true, false Online Admissions Management module true true, false Multiple school integrated Dashboard module true true, false Cost of AMC inclusive for all modules 1, 2, 3, 5 1, 5 No of sessions Training Provided at site 0, upto 5, 6 to 10 0, 6 to 10 Number of Years upto which Support is available from OEM/Franchise online 1, 5 FEATURES & FUNCTIONALITY PARAMETERS OF SCHOOL ADMINISTRATION & AUTOMATION SOFTWARE(GENERIC) Parent teacher collaboration true * Recruitment Management true * Alumni Management System true * 2/9 Result Processing true * Continuous Comprehensive Evaluation true * Library management true * Fee Management true * Staff Appraisal Management true * Contact Management true * Customization Development Services Provision true * Faculty/Staff Portal true * Online Registration true * Timetable, Attendance & Scheduling true * Curriculum Management true * Student Information Records Management true * Assessment Management true * Academic Reporting true * Classroom Management true * Lesson Plan Management true * Bookstore Management true * K-12(Content) Education System Management false * Higher Education Management true * Discipline/Behavior Tracking true * Teacher Gradebooks & Reports true * Exam Management true * Stress Management Features false * Pschology Study Features false * Academic Libraries Management true * 3/9 General Ledger true * Accounts Payable true * Billing & Invoicing true * Budgeting & Forecasting true * Payroll Management true * Fund Accounting true * Financial Aid Management true * Fundraising Management false * BarCode reader Integration true * SMS Engine Integration true * Email Integration true * Asset Management true * Facility Management true * Event Management true * Child Care Management false * Housing/Hostel Management true * Data Storage Management true * Child immunization reminders false * Practice Log true * Recital Management true * Repertoire Management true * Transport Management true * Instructor Management true * Competition Management true * Program Management true * Medical Management false * League/Team Management true * Inventory Management true * Training Management true * Sports Management true * 4/9 Summer Camp Management false * Managing Conferences Seminars Conventions true * Guest List Management true * Enable/disable users true * Reset password feature true * Inspection module true * Accreditation module true * Cluster Deployment feature true * Analytics System available true * Work flow based Process true * Audit Trail true * Access Security true * Compliances with multiple Educational Boards true * If 'Yes', details of the Educational Boards complied ALL INDIA STATE AND CENTRAL BOARDS COMPLIED * Multiligual Support true * If 'Yes', details of supported Languages ALL INDIA ALL LANGUAGES SUPPORTED * Reporting & Analysis true * Personalized dash boards based on user role true * Mobile App Features Availability true * Cloud Integration & support true * Open Source false * Number of years in Operation true * Deployment Options true * No of Institutions handled true * SUPPORTED HARDWARE Hard Disk Space Required 1 TB * 5/9 REQUIREMENT PARAMETERS OF SCHOOL ADMINISTRATION & AUTOMATION SOFTWARE RAM Size required 16 GB * Server requirements ANY BRANDED SERVER * CPU requirements QUADCORE XEON * Other Hardware requirements ANY BRANDED SERVER * Operating Systems supported (Driver) WINDOWS SERVER * Supported Devices ALL * Supported Servers ANY BRANDED SERVER * Supported Web browsers ALL * Supported Databases MS SQL SERVER * Supported Networking Protocols ALL * Supported File formats ALL * Min Processor bench mark score required 100000 * Number of Devices Managed 1000 * GENERIC PARAMETERS OF SCHOOL ADMINISTRATION & AUTOMATION SOFTWARE Free Upgradation to Higher Version Yes Yes Maximum user handling capability 1000000 * Concurrent user handling capability 100000 * Installation and commissioning true * Valid Licence copy to be provided Yes * Software supplied through Media, URL Link, Media & URL Link * Installation and Demonstration true * List of items included in the package MANUALS, DVD, TEST CASES, SCENARIOS, APPLICATION SOFTWARE, DATABASE, VIDEOS, SRS DOCUMENTS, BRD, PROCESS FLOW DOCUMENTATION * Hyper link to Data sheet http:/www.iweb.ltd * No of Softwares Appliance sold 1000 * 6/9 Number of User Referance no 1 with in Government Department email, phone no Of concerned authority where Appliance/Software installed 1000 * Details of Government Department email, phone no Of concerned authority where Appliance/Software installed for above Rajesh Ghorpade, ARIS Cell <[email protected]> * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashok Kumar 152004, moga road ferozepur - 152004 2000 30

Utility Vehicles

sofas

Class Room Desking and Seating Average Turn Over of Last 3 Years 56 Lakh (s) Experience with Gov. Required 9 Year (s) Class Room Desking And Seating ( 160 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING ONLY TABLE/DESK ONLY DESKS Desking Configuration THREE SEATER SINGLE SEATER, TWO SEATER, THREE SEATER, FOUR SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 1150 * DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18 mm thick prelaminated Particle Board * Material of Support Structure or Side Pannel Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm * Height of Desk Top in mm (±5 mm) 700 * Width of Desk Top in 450 * 1/3 mm (± 5 mm) SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 18 mm thick prelaminated Particle Board * Material of Support Structure Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm * Material of Seat Cushion ONLY DESK NO SEATING 40 mm thick PU foam of density 40 gram per cubic cm, WITHOUT CUSHION, ONLY DESK NO SEATING Width of Seating in mm (±10 mm) ONLY DESK NO SEATING * Height of Seat in mm (±10 mm) ONLY DESK NO SEATING * Width of backrest if provided in mm (± 5 mm) No Backrest * Back Support for Seating of Same materail as Seating Provided without cushion Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) Can be configured as per buyer's choice within offered technical details * Colour of finish As per buyer's choice * Desk top finishing All sides Edge to be banded with PVC tape of 2 mm thick with help of hot melt glue * Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) NA * WARRANTY Warranty period in number of years 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Deepak Kumar Dewangan 495690, Nagar Panchayat Jaijepur 160 15 2/3

Class Room Desking and Seating Average Turn Over of Last 3 Years 54 Lakh (s) Experience with Gov. Required 9 Year (s) Class Room Desking And Seating ( 160 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING ONLY SEATING ONLY BENCHES Desking Configuration SINGLE SEATER SINGLE SEATER, TWO SEATER, THREE SEATER, FOUR SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 850 * DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 25 mm thick prelaminated Particle Board * Material of Support Structure or Side Pannel SS 202 STRUCTURE * Height of Desk Top in mm (±5 mm) 600 * Width of Desk Top in mm (± 5 mm) 450 * 1/3 SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side * Material of Support Structure SS 202 STRUCTURE * Material of Seat Cushion WITHOUT CUSHION 40 mm thick PU foam of density 40 gram per cubic cm, WITHOUT CUSHION, ONLY DESK NO SEATING Width of Seating in mm (±10 mm) 300 * Height of Seat in mm (±10 mm) 600 * Width of backrest if provided in mm (± 5 mm) 200 * Back Support for Seating of Same materail as Seating Provided without cushion Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) YES * Colour of finish As per buyer's choice * Desk top finishing Two long sides to be post form half round profile plus with corner edge bending and other two sides edge banded with CP Teak Wood Lipping * Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) 360 * WARRANTY Warranty period in number of years 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Deepak Kumar Dewangan 495690, Nagar Panchayat Jaijepur 160 15

Public place seating chair Experience with Gov. Required 13 Year (s) Public Place Seating Chair ( 13 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Type of Seating separate seat and backrest * Style with arm and backrest with arm and backrest, with arm and without backrest, without arm and with backrest, without arm and backrest Seating Capacity (Nos) 3 2, 3, 4, 5 Number of arms (Nos) 2 * Delivery status Knocked Down Supply to be assembeled by Seller on Site * Seat Cushion WITHOUT CUSHION * Backrest Cushion WITHOUT CUSHION * MATERIAL Material of Main Frame mild steel mild steel, M S ERW tube, SS 202, SS 304 Material of Seat and Mild Steel Mild Steel, PU Foam 1/4 Backrest reinforced with 2 mm M S sheet inserts, SS 304, MS RECTANGULAR SECTION PIPE, Perforated MS sheet covered with 40 mm cushion cover. Material of Arms armrest are made up of powder coated high pressure aluminium dye cast armrest are made up of powder coated high pressure aluminium dye cast, cold rolled steel, MS ERW TUBE, MS RECTANGULAR SECTION PIPE Material of Legs cold rolled steel cold rolled steel, POWDER COATED HIGH PRESSURE ALUMINIUM DYE CAST LEGS, MS round pipe - 1.6 mm thick Material of Side Bar Bracket made up of chrome plated solid steel * Thickness of material of Main Frame in mm 2.2 * Thickness of material of Arms in mm 2.2 * Type of bolts M12 Bolts * Thickness of PU Foam for Seat and Backrest ±2(mm) N.A * Density of PU Foam for Seat and Backrest ±2(Kg/Cubic Metre) N.A * Covering Material for Seat and Backrest NA * DIMENSION Overall Length in mm (±10 mm) 1840 * Overall Depth in mm ( ±5 mm) 400 * Overall Height in mm (±5 mm) 450 * Seat Height from Floor in mm (±5 mm) 460 mm * Thickness of material of 2.2 MM * 2/4 Seat and Backrest (mm) CERTIFICATION Conforming to International Standard for Public Seating (*BIFMA X 5 dot 4 or equvalent) YES YES COLOUR & FINISH Colour of Covering Material N.A * All M S Strucure Finish NA * Colour of Paint metallic gray * All steel component to be epoxy powder coated NA * WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 2 1, 2, 5 MISC Seat and Backrest are Perforated true * Adjuster for legs false * Arms Chrome Plated true * Legs Chrome Plated true * Cushion on Arms false * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Deepak Kumar Dewangan 495690, Nagar Panchayat Jaijepur 13 15

scanners

Handloom Cotton Bed Sheets ( 2100 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification BIS specification No. IS:745:2003: Latest * Variety No as per BIS specification Mass (gram per square mtr) Variety No - 1/180 g Variety No - 10/290 g, Variety No - 1/180 g, Variety No - 2/200 g, Variety No - 3/190 g, Variety No - 4/230 g, Variety No - 6/260 g, Variety No - 7/320 g, Variety No - 8/310 g, Variety No - 9/255 g MANUFACTURE Manufacturing Type Handloom * SIZE Size (Length X Width) (cm) 250 X 150 250 X 150, 250 X 154 COLOUR Colour As Per Buyer's Requirement As Per Buyer's Requirement HEMMING Depth of transverse ends Hemming ( min ) 20mm * Sewing Thread 100 dtex X 6, as per IS: 1720 * LOGO AND MARKING Logo/Totem Marking As per buyer's requirements As per buyer's requirements 1/3 Screen Printed Identification Marking (longitudinal Running Strips) As per buyer's requirements As per buyer's requirements Handloom Mark false true, false TEST REPORT Availability of Test Report from NABL ILAC accredited or Central Government Lab to prove conformity of products to the specification false true, false Test Report No NA * Test Report Date NA * Name of the Lab NA * Address of the Lab NA * Test reports to be furnished to buyer on demand, if claimed to be available Not applicable * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bindiya Gaur 110034, BHAGWAN MAHAVIR HOSPITAL, GNCT OF DELHI, H-4/5, GURU HARKISHAN MARG, PITAMPURA, DELHI-110034 2100 30

Public place seating chair Experience with Gov. Required 13 Year (s) Public Place Seating Chair ( 14 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Type of Seating Integrated Seat and Backrest * Style with arm and backrest with arm and backrest, with arm and without backrest, without arm and with backrest, without arm and backrest Seating Capacity (Nos) 3 2, 3, 4, 5 Number of arms (Nos) 2 * Delivery status Assembled * Seat Cushion WITHOUT CUSHION * Backrest Cushion WITHOUT CUSHION * MATERIAL Material of Main Frame SS 202 mild steel, M S ERW tube, SS 202, SS 304 Material of Seat and Backrest SS 202 Mild Steel, PU Foam reinforced with 2 mm M S sheet inserts, SS 202 1/4, SS 304, MS RECTANGULAR SECTION PIPE, Perforated MS sheet covered with 40 mm cushion cover. Material of Arms armrest are made up of powder coated high pressure aluminium dye cast armrest are made up of powder coated high pressure aluminium dye cast, cold rolled steel, MS ERW TUBE, MS RECTANGULAR SECTION PIPE Material of Legs MS RECTANGULAR SECTION PIPE cold rolled steel, POWDER COATED HIGH PRESSURE ALUMINIUM DYE CAST LEGS, MS round pipe - 1.6 mm thick Material of Side Bar Bracket made up of chrome plated solid steel * Thickness of material of Main Frame in mm 1.1 * Thickness of material of Arms in mm 1.1 * Type of bolts M12 Bolts * Thickness of PU Foam for Seat and Backrest ±2(mm) N.A * Density of PU Foam for Seat and Backrest ±2(Kg/Cubic Metre) N.A * Covering Material for Seat and Backrest NA * DIMENSION Overall Length in mm (±10 mm) 1760 * Overall Depth in mm ( ±5 mm) 665 * Overall Height in mm (±5 mm) 450 * Seat Height from Floor in mm (±5 mm) 425 mm * Thickness of material of Seat and Backrest (mm) 1.2 mm * 2/4 CERTIFICATION Conforming to International Standard for Public Seating (*BIFMA X 5 dot 4 or equvalent) YES YES COLOUR & FINISH Colour of Covering Material N.A * All M S Strucure Finish Chrome Plated * Colour of Paint silver * All steel component to be epoxy powder coated 50 micron thick * WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 4 1, 2, 5 MISC Seat and Backrest are Perforated true * Adjuster for legs false * Arms Chrome Plated true * Legs Chrome Plated true * Cushion on Arms false * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Deepak Kumar Dewangan 495690, Nagar Panchayat Jaijepur 14 15

currency counting machine Experience with Gov. Required 10 Year (s) Currency Counting Machine ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Feed Mechanism Vaccum Type Friction Type, Vaccum Type Model Variant Floor Type Desktop Type, Floor Type Suitability for Currency Indian as well as Foreign Currency Indian Currency, Indian as well as Foreign Currency Type of Notes Stapled, Loose, Both - Operation Mode Auto Mode, Manual Mode, Batch Mode, Verify Mode, Stamp Mode - PHYSICAL CHARACTERSTICS Hopper Capacity 150 150, 200, 250, 300, 400 Dimensions ( Wx D x H) 361x306x904 - Weight 31 - POWER CHARACTERSTICS Power Supply 230 V AC ± 10 %, 50 Hz ± 2 % - Power Consumption 500 - TECHNICAL SPECIFICATIONS Counting Speed 100 - Automatically Detects Faulty/counterfeit false 1/4 Notes Counterfeit Notes Detection Method Infrared Sensors - Double Note Detection false - Detection of Width Variation of Notes false - Adjustable Mechanism for Sensitivity of Ultravi olet/Magnetic/Infrare d Sensors No Yes, No, NA Display Type LED - Number of Display digit 4 - counting Accuracy of Machine 100 - MISCELLANEOUS Dust Collector true Key Pad Feather Touch - Noise Level 60 - Availability of Batch Mode for counting bundles of 100 Notes from a larger Lots of Notes Yes - Extra Display Containing all features of Main Display Yes - Pip Alarm if counted number is not equal to preset number in CHECK and BATCH mode true - Other features High Speed Bank Note Counter, Heavy duty, High throughput, Four counting modes, Accurate, OK Stamp, User-friendly. A result of over a decade of experience in currency management and on going RD, the INFRES SUPERCOUNT is a world- class product offering unmatched features to meet the unique needs of all our customers.. - SERVICES Self Diagnostics for Electrical and Mechanical fault true 2/4 Warranty 1 1, 2, 3, 4, 5 OPERATING CONDITIONS Minimum Operating Temperature 0 - Maximum Operating Temperature 50 - Relative Humidity Non Condensing(%) 85 - CERTIFICATION Availability of Test Report from Central Govt/NABL approved ILAC accredited Lab Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajiv Kumar 110009, DELHI TRANSPORT CORPORATION, MS-1 (Central Workshop-1), Banda Bahadur Marg DELHI-110009. 15 15

office suite software - MS Office etc Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 5 Year (s) Office Suite Software - MS Office Etc ( 55 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values BASIC INFORMATION OF OFFICE SUITE SOFTWARE(GOLDEN) Product Type Proprietary Suites Proprietary Suites Name of Software Office Pro Plus 2016 SNGLOLP C * Name of the OEM MICROSOFT * OEM Model/Part No 79P-05551 * Product Id of OEM 79P-05551 * Date of Launch of Version 22 September 2015 * FEATURES & FUNCTIONALITY PARAMETERS(GOLDEN) Proprietary Suite microsoft office suite microsoft office suite Open Source Suite Not Applicable Not Applicable Type of licensing users based users based No of days Training Provided at Site 0 0 Number of Years upto which Support is available from OEM/Franchise 1 1, 2, 3, 5 1/5 online FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Word Processor true * Spreadsheet true * Presentation Tool true * Drawings and Diagrams true * Database Access true * One - Click Export to PDF true * Accessibility true * Support for many native languages true * Open XML File Format true * 3rd Party Add -ons true * XML File Filter Tool true * ActiveX Control true * Writing Support true * Advanced path editing tool true * Gradient and pattern tools true * Files and Printing true * Editing and Formatting true * Complex Documents true * Graphics true * Language Tools true * Manage Projects true * Collaboration over Same Platform Suite true * Billing true * Schedule meetings & Events true * Queries true * Forms true * Reports true * Relationships true * Connects with macros Macro Recorder true * Advance data manipulation true * User Control by writing true * 2/5 rich VBA code Compatability with SQL/MySQL Integration true * Built in Spell Checker Grammer & Style true * Dictionary/Theasaurus true * Utilities for manupulating and editing text true * Templates true * Formula Calculation Function true * Graphing Tool true * Pivot Table/Tables true * Micro programming language true * Visual Basic Language true * Slide Transitions true * Equation Editor true * Common Regional languages true * Themes true * Version Information true * Web Apps true * Azure Marketplace Connector true * Power View true * Scanned Images true * Auto Discover true * Cached Exchange Mode Sync Slider true * Exchange Server Support true * Outlook Social Connector true * People Pane true * PRF Files true * HTML Files true * Live Preview true * Blogging true * Research Button true * 3/5 SUPPORTED HARDWARE REQUIREMENTS PARAMETERS Processor Speed Required 1 gigahertz (Ghz) or faster x86- or x64-bit processor with SSE2 * Hard Disk Space Required 3.0 GB available disk space * RAM Size required 1 GB RAM (32 bit); 2 GB RAM (64 bit) * Operating Systems Supported Windows 7 or later, Windows 10 Server, Windows Server 2012 R2, Windows Server 2008 R2 or Windows Server 2012 * GENERIC PARAMETERS OF OFFICE SUITE SOFTWARE Free Upgradation to Higher Version within support period yes * Valid Licence copy to be provided yes * Software supplied through url link * List of items included in the package 1 * Number of Devices Supported for Each User License 1 * No of Softwares sold 2 * Number of User Referance no 1 with in Government Department email, phone no Of concerned authority where Appliance installed 2 * Details of Government Department email, phone no Of concerned authority where Appliance installed for above GOVT DEPT * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kamalanand Tukaram Tiple 441111, Office of the Chief Engineer, KTPS, Koradi Dist. Nagpur-441111 55 20 4/5