Loading
Loading…
Loading…
2,846 results • Latest
Security Manpower Service
Human Resource Outsourcing Service
Security Manpower Service
Desktops ( PAC Only ) Experience with Gov. Required 3 Year (s) Desktops ( 12 ) ( Under PAC ) Make hp Model hp280g3 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 7th 7th Processor Intel Core i3-7100 (3.9 GHz, 3 MB Cache, 2 Cores) Intel Core i3-7100 (3.9 GHz, 2 Cores) Motherboard Chipset Intel H110 * Expansion Slots (PCIe x 1) (Number) 2 * Expansion Slots (PCIe x 4) (Number) 2 * Expansion Slots (PCIe x 16) (Number) 2 * Graphics Graphics Type Integrated * Graphic Memory 1GB * 1/4 Operating System Operating System (Pre-Loaded) Windows 10 Professional Windows 10 Professional RAM Type of RAM DDR 4 * RAM Size (GB) 4 4 (or higher) RAM Expandability upto (GB) 16 16, 32, 64 (or higher) RAM Speed (MHz) 2133 * Storage Hard Disk (GB) 1000 1000 (or higher) Cabinet Cabinet Tower * Cabinet Volume (Litres) - * Internal Bays 2 * External Bays (Number) 2 * DIMM Slots (Number) 2 * Connectivity Wireless NA * Network Connectivity 10/100/1000 on board Integrated Gigabit Port * Ports USB Port 2.0 (Number) 6 * USB Port 3.0 (Number) 2 * Serial Port true * Parallel Port true * VGA false * HDMI false * Display Port false * Monitor Monitor Size (INCHES) 18.5 18.5, 19.5, 21.5, 24, 27 (or higher) Monitor Resolution (PIXELS) 1366x768 1366x768, 1920x1080, 3200x1800, 3840 x 2160, 1440 x 900, 1600 x 900 Monitor Certification - * Power Power Supply (Watt) - * Minimum Power Efficiency(%) 85 * Certification ROHS Compliance Yes * BEE/Energy Star for the given Model true * Input Devices Mouse Optical * Keyboard Standard * 2/4 Generic Optical Drive N/A * Internal Speaker false * On Site OEM Warranty (Year) 3 3, 5 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shradhda Yogesh Baviskar 421003, Ulhasnagar Municipal Corporation Near Chopda Court Ulhasnagar 3 12 15
revolving chair Revolving Chair ( 12 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt central tilt Tilt Tension Adjustment true * Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black * Ergonomic Seat Design true true, false 1/5 Back type fixed push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame * backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true * Locking mechanism true * Type of locking tilt limitor * Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Chrome finish with 5 wheels Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin 2/5 Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Proypylene steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam Covered With pure leatherite pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 * Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 40 * Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, N.A 3/5 GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram * DIMENSION Overall Chair Height ±15mm 1310 1310 Backrest Height ±15mm 730 * Backrest Width ±10mm 520 * Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 550 440, 520, 550, 460, 360 Seat Depth ±10 mm 500 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.3 * Thickness of Plywood used in Seat ±1(mm) 18 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 18 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 * Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 70 * Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 70 * WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO NO YES, NO 4/5 14001:2015 certified OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mohan Sahebrao 411018, PCMC main building, pune mumbai road pimpri 411018 12 15
Long Handle Drainage Cleaner
acute care monitoring units and related products- patient monitors Acute Care Monitoring Units And Related Products-patient Monitors ( 7 ) Technical Specifications Specification Specification Name Values Allowed Values NEW SET Type of Monitor Preconfigured/Non Modular - Functional Requirements: Operates from mains voltage or from internal rechargeable battery Operator can set audio visual alarm levels for low or high levels of each parameter independently Allows display of single, 3 lead ECG or simultaneous display of at least 5 waves ECG selected from up to 12 points Display to be digital of all active parameters and trace display for at least three selectable parameters Yes - Clinical Purpose: Designed to continuously measure and display multiple vital physiological YES - 1/7 parameters of adults, newborn and premature infants, especially those under critical care Continuous display on screen of neonatal or infant ECG, respiration and heart rates, invasive/non-invasive blood pressure, body temperature and SpO2 Yes - Patient monitor offered with option to monitor parameter(s): EtCO2, IBP EtCO2, IBP, Cardiac Output Number of leads for ECG 5 3, 5, 12 Screen Size 12 8, 12, 14, 15, 17 Weight 5.5 - ECG patient connectors that are sterilisable and reusable are acceptable though reusable cables that attach to disposable connection patches are preferred Multichannel (up to 12 leads) ECG measurement and selectable display of upto 5 leads at a time Temperature probe to be reusable, external skin contact type; Temperature range at least 30 to 40 deg C, minimum gradation (1/10) deg C/Heart rate measurement range to be at least 30 to 250 bpm, with accuracy better than ± 5 bpm and minimum gradation 1 bpm/SpO2 measurement range at least 40-70 % and 70 to 99 %, with accuracy better than ± 1% for 40-70 range and better than ± 3% for 70-99 range and minimum gradation 1%/Blood Yes - 2/7 pressure monitoring range at least 30 to 300 mmHg, minimum gradation 1 mmHg Respiration rate measurement range at least 0 to 100 bpm, minimum gradation 1 bpm/Trend display of each parameter over at least previous 24 hours to be selectable ECG patient connectors that are sterilisable and reusable are acceptable though reusable cables that attach to disposable connection patches are preferred Multichannel (up to 12 leads) ECG measurement and selectable display of upto 5 leads at a time Temperature probe to be reusable, with accuracy better than ± 1% for 40-70 range and better than ± 3% for 70-99 range and minimum gradation 1%/Blood pressure monitoring range at least 30 to 300 mmHg, minimum gradation 1 bpm/Trend display of each parameter over at least previous 24 hours true - 3/7 to be selectable/TFT Screen User Interface Manual through knob or key board Manual through knob or key board, Through touch Screen, remotely operated Audio Visual alarms high and low levels for each parameter (operator variable settings), sensor/wire probe disconnected, low battery - Case is to be hard and splash proof/Display must allow easy viewing in all ambient light levels/Cable connectors to be designed so as fit correct socket only Yes - Noise (in dB) < 50 - Heat Dissipation: Should maitain nominal Temp and the heat should be disbursed through adequate arrangement - Mobility & Portability Fixed mounted usage - Power supply Replaceable And Rechargeable Battery Operated (Min One Hour Operation Support In The Event Of Power Failure) and 220 Volt, 50 Hz AC both 220 volt, 50 Hz AC, replaceable and rechargeable Battery Operated (Min one hour operation support in the event of power failure), Replaceable And Rechargeable Battery Operated (Min One Hour Operation Support In The Event Of Power Failure) and 220 Volt, 50 Hz AC both Mains cable to be at least 3m length YES - Accessories & Spare Parts: pairs of ECG cable 5 sets of ECG connection electrodes 1 unit each of reusable SPO2 probe(Adult/Paediatric) 1 unit of SPO2 probe(Neo natal) 2 units of NIBP cuffs for adult 2 units of NIBP cuffs for Paediatric 1 unit each of skin and pairs of ECG cable 5 sets of ECG connection electrodes 1 unit each of reusable SPO2 probe(Adult/Paediatric) 1 unit of SPO2 probe(Neo natal) 2 units of NIBP cuffs for adult 2 units of NIBP cuffs for Paediatric 1 unit each of skin and 4/7 rectal Temperature probe rectal Temperature probe Operating condition: apable of operating continuously in ambient temperature of 0 to 50 deg C and relative humidity of 15 to 90% in ideal circumstances - Should be FDA CE/BIS approved product US FDA, European CE US FDA, European CE, BIS - Electrical safety conforms to standards for electrical safety IEC-60601-1/- Shall meet IEC-60601-1-2 (General requirements for safety - electromagnetic compatibility)/-Also conforms to IEC 60601-2- 27 (Particular requirements for the safety of electrocardiographic monitoring equipment) - Manufacturer supplier should have ISO certificate for quality standard/- Shall meet IEC 60601-2-49 multi function patient monitoring equipment standard requirement Yes - Seller to perform supply, installation, safety & operation checks and training before handover of the product [Training of users in operation and basic maintenance shall be provided] Yes - Warranty Comprehensive warranty of 3 years with free servicing ( min 3/year) during warranty - Operating manuals, service manuals, other manuals/documents Advanced maintenance tasks required shall be documented User, technical and - 5/7 maintenance manuals to be supplied in English language. List to be provided of equipment and procedures required for local calibration and routine maintenance List to be provided of important spares and accessories, with their part numbers. Certificate of calibration and inspection to be provided. Recommendations or warnings Any recommendations for best use and supplimentary warning for safety to be declared - Details of Item and test reports Availability of Test Report from Central Govt/NABL/ILAC/Any OPCW accredited lab to prove conformity to specification No - Test report (if indicated as available) to be furnished to buyer on demand YES - Test report No & date K131971 and 20-03-2014 - Name and address of the Lab: Department of Health and Human Services, USA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajendra Kumar Chopra 110095, Guru Teg Bahadur Hospital, Dilshad Garden 7 45
glue stick Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 1 Year (s) Glue Stick ( 250 ) Technical Specifications Specification Specification Name Values Allowed Values Type Type of Glue Soft paste, non toxic, quick drying for paper etc. - Applicator Applicator By rotational movement of the bottom of the stick - Net Content and Shelf Life Net content of the stick (Grams) 15.0 8, 15, 25, 35, 40, 50 Higher is better Shelf life 24.0 Packing Enclosure ABS plastic with lid Plastic with lid, ABS plastic with lid No of sticks in a pack (Nos.) Pack of 20 Pack of 5, Pack of 10, Pack of 20 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prashant Madan Chourasiya 110091, 2nd Floor, Delhi Govt. Health Centre, 250 15 1/2 30-Extra Block, Himmatpuri (Trilok Puri)
OEM Cartridge/Consumable Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) OEM Cartridge/Consumable ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 12A Black Original LaserJet Toner Cartridge - Corresponding Part number/code Q2612AC - Printer Model number/numbers for which Cartridge is suitable HP Laserjet 1010, HP LaserJet 1012 Printer, HP LaserJet 1015 Printer, HP LaserJet 1020 Plus Printer, HP LaserJet 1020 Printer, HP LaserJet 1022n Printer, HP LaserJet M1005 MFP Printer, HP - 1/3 LaserJet M1319f MFP Printer, HP LJ3050 All-in- One Printer, HP LJ3052 All-in-One Printer, HP LJ3055 All-in-One Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2000 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prashant Madan Chourasiya 110091, 2nd Floor, Delhi Govt. Health Centre, 30-Extra Block, Himmatpuri (Trilok Puri), 3 15
Notebook Computers-laptop
Notebook Computers-laptop
Multifunction Machines
Multifunction Machines Multifunction Machines ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Type of Machine Digital Copier - Print Technology Laser Inkjet, Laser Cartridge Technology With Separate Drum and Toner With Composite Cartridge, With Separate Drum and Toner, Ink Type of Printing Colour Mono, Colour Platen/Flatbed Size A3 A3, A4, Legal Paper Size (Original/Image) A3/A3 A3/A3, A4/A4, Legal/Legal RAM size (MB) 4144 - Hard Disk Capacity(GB) 250 Minimum Speed per Minute in A4 Size- Mono (PPM) 25 Minimum Speed per Minute in A4 Size- Colour (PPM) 25 Minimum Speed per Minute in A3 Size- Mono(PPM) 12 - Minimum Speed per 12 - 1/3 Minute in A3 Size- Colour(PPM) Scanning Feature Availability Yes Yes, No Duplexing Feature Availability Yes Yes, No Networking Feature Availability Yes Yes, No If yes, Network Interface Ethernet 10/100/1000 - Faxing Feature Availability No Yes, No Speed of Fax, If Fax Feature is available NA - Original Feed Type Platen Platen, ADF, DADF/RADF, SPDF Feeder Capacity (Number) 0 - Wi-Fi Capability No Yes, Wi-Fi Type NA - Number of Main Tray(Number) 2 Total Main Tray Capacity 1000 - Bypass Facility Yes - Bypass Tray Capacity 150 - Yield of the cartridge/Ink Tank/Ink Pack (for C, M, Y & K individually) supplied with Machine(Number of prints) 26000 - Life of Drum in terms of number of Prints in case of Separate Drum and Toner cartridge technology(Number of Prints) 60000 - Duty Cycle/Month (Number of Prints) 30000 - BIS Registration under CRS of Meity Yes - BIS Registration Number - - Operating Temperature Range (Degree C) 30 - 2/3 Operating Humidity (%RH) 18 - On Site OEM Warranty (Year) 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kajal Viral Panchal 382010, 8th floor, Block no 1, Udyog Bhavan, Sector 11, Gandhinagar 1 15
OEM Cartridge/Consumable, OEM Cartridge Consumable, OEM Cartridge/Consuma OEM Cartridge/Consumable ( 186 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP Black Contract Original LaserJet Toner Cartridge (HP LaserJet (CE505A) Black Print Cartridge 05A) - Corresponding Part number/code CE505AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet P2035 Printer, HP LaserJet P2035n Printer, HP LaserJet P2055d Printer, HP LaserJet P2055dn Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & 2300 - 1/7 ISO/IEC:19798/2007(E) for colour (Numbers) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mohan Sahebrao 411018, PCMC main building, pune mumbai road pimpri 411018 186 15 OEM Cartridge/Consumable ( 123 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 12A Black Original LaserJet Toner Cartridge - Corresponding Part number/code Q2612AC - Printer Model number/numbers for which Cartridge is suitable HP Laserjet 1010, HP LaserJet 1012 Printer, HP LaserJet 1015 Printer, HP LaserJet 1020 Plus Printer, HP LaserJet 1020 Printer, HP LaserJet 1022n Printer, HP LaserJet M1005 MFP Printer, HP LaserJet M1319f MFP Printer, HP LJ3050 All-in- One Printer, HP LJ3052 All-in-One Printer, HP LJ3055 All-in-One Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2000 - * Bold specifications are the golden parameters. 2/7 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kailas Divekar 411018, Pune - Mumbai highway 123 15 OEM Cartridge/Consumable ( 90 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 36A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CB436AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1522n MFP Printer, HP LaserJet M1522nf MFP Printer, HP LaserJet P1505 Printer, HP LaserJet P1505n Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2000 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kailas Divekar 411018, Pune - Mumbai highway 90 15 OEM Cartridge/Consumable ( 102 ) 3/7 Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 78A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CE278AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1536dnf MFP Printer, HP LaserJet P1566 Printer, HP LaserJet P1606dn Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2100 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kailas Divekar 411018, Pune - Mumbai highway 102 15 OEM Cartridge/Consumable ( 129 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 80A Black Original LaserJet Toner - 4/7 Cartridge Corresponding Part number/code CF280A - Printer Model number/numbers for which Cartridge is suitable HP LaserJet Pro 400 M401d Printer, HP LaserJet Pro 400 M401dn Printer, HP LaserJet Pro 400 M401dne Printer, HP LaserJet Pro 400 M401dw Printer, HP LaserJet Pro 400 M401n Printer, HP LaserJet Pro 400 M425dn MFP Printer, HP LaserJet Pro 400 M425dw MFP Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2700 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mohan Sahebrao 411018, pune mumbai road pimpri 411018 129 15 OEM Cartridge/Consumable ( 60 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 88A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CC388AC - Printer Model HP LaserJet M1136 MFP - 5/7 number/numbers for which Cartridge is suitable Printer, HP LaserJet M1136 MFP Value Bundle, HP LaserJet M1213nf MFP Printer, HP LaserJet M1216nfh MFP Printer, HP LaserJet P1007 Printer, HP LaserJet P1008 Printer, HP LaserJet P1106 Printer, HP LaserJet P1108 Printer, HP LaserJet Pro M1218nfs MFP Printer, HP LaserJet Pro M202dw Printer, HP LaserJet Pro M202n Printer, HP LaserJet Pro MFP M126nw Printer, HP LaserJet Pro MFP M128fn Printer, HP LaserJet Pro MFP M128fw Printer, HP LaserJet Pro MFP M226dn Printer, HP LaserJet Pro MFP M226dw Printer Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 1500 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mohan Sahebrao 411018, pune mumbai road pimpri 411018 60 15
Steel tables Steel Tables ( 2 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS: 8126 Latest true * Storage both side one side, both side Total Number of Storage Units five storage single storage, double storage, triple storage, four storage, five storage, six storage Cup Board/Locker type Storage Units two * Type of Storage Units OTHER DESIGNS * Lock on all storage units Provided * Loading capacity of table top in KG ( ±5 Kg) 100 KG * Table Top Material and Thickness (±2 mm) 18 mm thick prelaminated Particle Board (Not as per IS 8126) 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 1/4 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 18 mm thick prelaminated Particle Board (Not as per IS 8126), 20 mm multiplex board, 40 mm multiplex board, 50 mm multiplex board, 25 mm thick MDF Board. Padestal (Under structure) Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum (Not as per IS 8126) Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum (Not as per IS 8126), Mild steel rectangular section of out side minimum 30 mm X 20 mm & Wall thickness minimum 1.2 mm Table Top Length ±10(mm) 1360 900, 1000, 1190, 1300, 1360, 1500, 1660, 1800, 2000, 750 Table Top Width ±10(mm) 690 470, 600, 690, 750, 800, 900, 705, 450 Table Height ±5(mm) 735 710, 735, 760, 840, 850, 860, 750 MATERIAL Foot Rest Material Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum (Not as per IS 8126) * Handles Material Plastic (Not as per IS 8126) * Thickness of PVC tape on edges of Table Top banded with the help of hot melt glue (mm) 2.5 mm * Storage Unit and Drawer Units Material 0.6 mm M S Sheet (Not as per IS 8126) 0.6 mm M S Sheet (Not as per IS 8126), 0.7 mm M S sheet, 0.8 mm M S sheet, 0.9 mm m s sheet, 1.0 mm m s sheet, 1.1 mm m s 2/4 sheet, 1.2 mm m s sheet, 0.5 mm m s sheet Shoes Material nylon * DIMENSION Width of Storage Unit ±5(mm) 355 * Depth of Storage Unit ±10(mm) 575 355, 650, 700, 725, 575 Overall Height of Storage Units ±10 mm 560 mm * Height of smallest Storage Compartment Drawer ±3 mm 165 mm * Height of medium size Storage Compartment Drawer ±5 mm SAME AS SMALLEST * Height of Largest Storage Compartment Drawer ±5 mm 305 mm * Width of Locker Cupboard type Storage unit N.A 450 mm, 500 mm, 560 mm, N.A, 350 mm Depth of Locker Cupboard type Storage unit N.A 600 mm, 650 mm, 700 mm, 725 mm, N.A Height of Locker Cupboard type Storage unit N.A * MISC Foot Rest Provided YES * COLOUR & FINISH Colour of Lamination grey * Paint Powder coated * Colour of Paint gray * CERTIFICATION ISI Marked false true, false Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO 3/4 Green guard certification NO YES, NO WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukul Kumar Bhagat 834004, project building, HEC, Dhurwa, Ranchi 2 15
breath alcohol analyzers Breath Alcohol Analyzers ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values TECHNOLOGY PERFORMANCE Sensor Technology ElectroChemical - Fuel Cell (alcohol specific) ElectroChemical - Fuel Cell (alcohol specific), Semiconducter Alcohol Sensor Sampling Method Deep Lung Exhalation Method * Sampling Error Detection Alarm on wrong sampling * Sampling modes Both Active and Passive * Measuring Range [mg/100 ml BAC (Blood Alcohol Concentration)] 0 to 400 0 to 400, 0 to 500, 0 to 600 Accuracy +/- 5 % or better * Drift of the breath analyzer in 6 months period (mg/100 ml BAC) 1 Any applicable numeric value Easily replaceable mouthpiece with yes * 1/5 Sputum Trap Sample Taking Duration 5 * Analytical Response Time (At '0' level of Alcohol) 5 * Analytical Response Time for positive result 15 * Recovery Time at (1/2) mg/ltr 50 * Warm up Time (after putting on) 15 * Time required for re- calibration 6 * Barometric Pressure Range (hpa or millibar) 1000 * Shelf Life of Fuel Cell 3 * RoHS Compliant true * The Equipment meet RFI requirement as per EN:5008-1/1992(emissi on) and EN 50082-1:19 97(immunity) or equivalent requirements true * PHYSICAL Weight 0.167 * Size ( mm x mm x mm ) 120x70x30 * BATTERY OF ANALYZER Power Source Rechargeable Battery * Chemistry of Rechargeable Battery Ni-MH * Battery Voltage 9 * Battery Backup Time (continuous duty) 40 * Number of Spare Rechargeable Batteries supplied with the instrument 0 * Low Battery indication yes * DISPLAY/INDICATOR STORAGE/INTERFACE Display Type LCD * Display Size 3 * Availability of audible beeper for over range, low battery etc yes * Record Entry Through Integrated/Touch Through Integrated/Touch 2/5 Screen Screen, Through Alphanumeric KeyBoard Minimum Record Fields Full Information as per the user's requirement such as Driver Name, Vehicle number, inspector name, test report with time, date, geolocation, instrument id, etc * Record Memory (Minimum) 4000 4000, 10000, 20000, 30000, 50000 Record Data Downloadable to PC yes * Data Interface USB * GPS false * If yes, Capable to display the geolocation of test inspection location NA * Camera false true, false If yes, Capable to capture the clear image of test target NA * PRINTER Printer Without With, Without Type of Printer NA Portable Dot Matrix Printer with Wireless Bluetooth Connectivity, Portable Inkjet Printer with Wireless Bluetooth Connectivity, Portable Laserjet Printer with Wireless Bluetooth Connectivity, Internal Thermal Printer, NA Print Resolution (dpi) 200 * Printer consists of Inbuilt Rechargeable Battery, Paper for offence printouts, Charger NA * Minimum number of printouts that can be taken with the paper available with the Printer 1000 * "Minimum number of printouts that can be 100 * 3/5 taken with single charge of the printer battery (Hint:- Minimum 60 prints, if 'With Printer' May indicate '0' if not applicable)" Bis Registration number for Printer under CRS of MeitY IS 616:2010 R-41000027 * WARRANTY Warranty 1 1, 2, 3, 4, 5 (or higher) STATUTORY REQUIREMENTS The equipment can be used as an evidential instrument for Traffic Law Enforcement, The instrument is hand held, portable and easy to operate true * If Yes, the equipment meets the requirements of the applicable latest Central Motor Vehicle Rules and all Govt notifications yes * Immunity to RF interface, meets requirement as per EN: 5008-/1992(emission) and EN:50082-1:1997 (immunity) or equivalent yes * OPERATING CONDITIONS Minimum Operating Temperature 0 * Maximum Operating Temperature 50 * Relative Humidity Non Condensing (%) 95 * ENVIRONMENTAL CERTIFICATION Conformity to Dry Heat test at 50 degree C for 16 hours as per IS :9000 latest true * Conformity to Damp heat at 40 degree C - 95% RH (cyclic test): two cycles of 16+8 hours as per IS: 9000 latest true * Conformity to Cold test at - 5/-10/- 15/-20 degree C (as true * 4/5 applicable) for 4 hours as per IS: 9000 latest Availability of Test Reports from Central Govt/NABL approved ILAC accredited Lab to prove conformity to the specification true * Test Report Number and Date GB11/84488 DATED 10/12/2015 * Name of the Lab and Address SGS, 202B WORLEY PARKWAY, U.K. * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Buddhilal Prasad 233001, CMO District Hospital Gorabazar Ghazipur 1 15
Multimedia Projectors
Line Intractive UPS with AVR Line Intractive UPS With AVR ( 5 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 1.0/168 * Technology MOSFET-PWM MOSFET-PWM, IGBT- PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz, Single Phase Quasi-Sin-wave 230 V AC, 50 Hz Degree of protection IP 20 IP-21, IP 20 Inverter Efficiency (%) >/= 70% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year 1 year, 3 Years Warranty for Line Interactive UPS 1 Year 1 Year, 2 Years, 5 Years, 3 Years Installation and commissioning Yes * 1/4 instructions CONSTRUCTIONAL Type of enclosure ABS * AC out put for printer (not through inverter) No Yes, No Inverter out put socket AC out put for printer (not through inverter) Not applicable 2 Three pin, 3 Three pin, Hard wiring, Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% * Input (Volt) Single phase sinewave(160-280v) * Switching over time (Mili sec) Maximum 10 milli seconds * Overload Time (Minutes) >/= 10 minutes * Load power factor >/= 0.6 * Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz * Overload (%) >/=10% * Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% * Variation on output frequency in battery mode (Hz) </=0.5 * PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 * Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes * Protection against short circuit of UPS Yes * Protection for over voltage and over load Yes * REPORTS AND Damp heat Test at 45 Yes * 2/4 CERTIFICATIONS degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes * Cold Test as per IS:9000 pt-2/sec-4 Yes * Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes * Type Test certificate no. and date - * Name Of Lab - * Address of Lab - * As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukul Kumar Bhagat 834004, project building, HEC, Dhurwa, Ranchi 5 15
digital teaching device Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 2 Year (s) Digital Teaching Device ( 1 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values Cabinet Cabinet Floor Mounted lockable enclosure Wall Mounted lockable enclosure, Floor Mounted lockable enclosure Material of the Cabinet ABS * Degree of Protection (IP Rating) - * CPU CPU Intel Atom Intel Core I3, Intel Core I5, Intel Core I7, Intel Atom Processor Generation 6th 6th, 7th, 8th RAM (GB) 2 2-99 RAM upgradable upto (GB) 8 8, 16 (or higher) Hard Disk Capacity (GB) 96 500, 1000, 96 (or higher) 1/6 Hard Disk Upgradable upto (GB) 2000 1000, 2000 (or higher) OS Compatibility Windows 10 Professional * VGA Port Yes * No. of USB 2.0 Ports (Nos) 4 * No. of USB 3.0 Ports (Nos) 1 * LAN Port Yes * Keyboard Inbuilt * Mouse/Track Pad Inbuilt * Operating System Windows DoS, Linux, Windows Central Controller Central Controller Not Available Available, Not Available Provisions available to control various components System On/off, PC on/off, Projector on/off, volume control keys, external PC input, VGA input etc * Visualizer Visualizer Not Available Available, Not Available TYPE NA * Technology NA * Capture Size/Image Size NA * Resolution (Pixels) NA * Image Pick up Device (inch) NA * Video Frame Rates (fps) 0 * Optical Zoom 0 * Digital magnification 0 * Focussing Arrangement NA * Lens Focal Length (mm) 0 * Image Memory (Number of Images) 0 * Image Rotation Facility (Degree) 0 * Computer Interface NA * Light Source NA * 2/6 Life of Lamp used (Years) 0 * Number of Input VGA Port 0 * Number of Output VGA Port 0 * Number of Output HDMI Port 0 * Scan Object NA * Video Format Supported NA * Interactive Board Interactive Board Available Available, Not Available Board Diagonal size (mm) 2160 (Active interactive area on wall) * Width of the active area of the board (mm) 1890 (Active interactive area on wall) * Height of the active area of the board (mm) 1080 (Active interactive area on wall) * Display Resolution (pixels) 1280 * 800 * Board Aspect Ratio 16 : 10 * Touch interface pen driven Touch sensitive, pen driven, Touch sensitive as well as pen driven, NA Touch Technology Infrared Resistive, Electromagnetic, Infrared, Ultra sonic, Capacitive, Optical, NA Number of touch points 1 * Response time (milli seconds) 1 * Operating system Compatability windows * Input HDMI ports (Nos) 1 * USB 2 ports (Numbers) 5 * USB 3 ports (Numbers) 1 * Audio Input ports (Numbers) 1 * Audio output ports (Numbers) Yes * 3/6 RS-232 C ports (Numbers) NA * RJ 45 ports (Numbers) 1 * VGA-IN ports (Numbers) 1 * VGA OUT ports (Numbers) NA * Short Cut Keys (Available on both sides of board) NA * In built Speakers Yes * Speaker Output (Watt) 10 * Number of electronic pen or stylus to be supplied with the board (Numbers) 1 * Bluetooth connectivity Yes * Wi-fi connectivity Yes * Power Supply V(AC) 100-240 * Details of software provided Drawview, Educational Software for school * Power consumption (Watt) 45 * Standard Accessories to be supplied ie Active Board, Cordless Pen, USB Cable etc NA * Operating Temperature Range for Complete Digital Teaching Device (degree C) 0 to 55 Degree CELSIUS * Operating Humidity (RH) for Complete Digital Teaching Device (%) 95 % * Projector with Arm Projector with Arm Available Available, Not Available Type Short Throw * TECHNOLOGY DLP * Native Resolution 1280 * 800 * Brightness (Lumens) 1500 Any applicable text(s) Contrast Ratio (Minimum) - * Zoom Feature Yes * Zoom ( in %age) - 10 % * 4/6 Throw Ratio - * Aspect Ratio 16 : 10 * Keystone Correction Manual * Projection Lamp LED UHP, LED, Laser, LED & Laser Hybrid, NA Minimum Life of projection Lamp (In Normal Mode) (Hours) 20000 Any applicable text(s) Lamp Hour Counter (In- Built) NA * Video Compatibility - * Inbuilt Speaker Yes * Speaker Output (Watt) 10 * HDMI/DVI Port Yes * Analog RGB In Port Yes * Analog RGB Out Port No * Audio In Yes * Audio Out Yes * Video In Yes * Storage Media Port (USB- Type A ) Yes * WiFi Availabilty Yes * LAN Connectivity Yes * Power Consumption in Sleep Mode (Watt) - * Power Consumption in Normal Mode (Watt) 110 * Power Supply (Vac) - * Green Board Green Board Not Available Available, Not Available If Yes, Dimension of Green Board (Length x Width) (cm x cm) NA * Air Mouse with Laser Pointer Air Mouse with Laser Pointer Not Available Available, Not Available External Frame External Frame to fix Active Board with Green Board Not Available Available, Not Available Dimension of External Frame (Length x Width) (cm x cm) NA * Warranty On site OEM 1 1, 2, 3, 4, 5 5/6 Warranty (Year) (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sujeet Narayanrao Khamankar 442701, alapalli Road 1 15
Multifunction Machines ( PAC Only ) Multifunction Machines ( 7 ) ( Under PAC ) Make samsung Model sl-m2876nd Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Ungrouped Type of Machine Multifunction Machine * Print Technology Laser Inkjet, Laser Cartridge Technology With Composite Cartridge With Composite Cartridge, With Separate Drum and Toner, Ink Type of Printing Mono Mono, Colour Platen/Flatbed Size A4 A3, A4, Legal Paper Size (Original/Image) A4/A4 A3/A3, A4/A4, Legal/Legal RAM size (MB) 128 * Hard Disk Capacity(GB) 1280 Any applicable numeric value Minimum Speed per Minute in A4 Size- Mono (PPM) 28 Any applicable numeric value 1/4 Minimum Speed per Minute in A4 Size- Colour (PPM) 0 Any applicable numeric value Minimum Speed per Minute in A3 Size- Mono(PPM) 0 * Minimum Speed per Minute in A3 Size- Colour(PPM) 0 * Scanning Feature Availability Yes Yes, No Duplexing Feature Availability No Yes, No Networking Feature Availability No Yes, No If yes, Network Interface NA * Faxing Feature Availability No Yes, No Speed of Fax, If Fax Feature is available NA * Original Feed Type Platen Platen, ADF, DADF/RADF, SPDF Feeder Capacity (Number) 1 * Wi-Fi Capability No Yes, Wi-Fi Type NA * Number of Main Tray(Number) 1 Any applicable numeric value Total Main Tray Capacity 1 * Bypass Facility No * Bypass Tray Capacity 0 * Yield of the cartridge/Ink Tank/Ink Pack (for C, M, Y & K individually) supplied with Machine(Number of prints) 2563 * Life of Drum in terms of number of Prints in case of Separate Drum and Toner cartridge technology(Number of Prints) 125 * Duty Cycle/Month (Number of Prints) 11 * 2/4 BIS Registration under CRS of Meity Yes * BIS Registration Number - * Operating Temperature Range (Degree C) 45 * Operating Humidity (%RH) 85 * On Site OEM Warranty (Year) 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahendra Shankar Dukhande 400001, S.T. College Campus, Elphistone Technical High School, Mahapalika Marg, Dhobi Talao 7 15
Random Access Memory
lead acid battery Experience with Gov. Required 2 Year (s) Lead Acid Battery ( 97 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments, Statinary Lead-Acid Batteries (with tubular positive plates) in Monobloc Container conforming to IS:13369/1992, Stationary cells and Batteries, Lead Acid Type (With Tubular Positive Plates) conforming to IS:1651/1991, Stationary Valve Regulated Lead Acid Batteries conforming to IS:15549/2005, Lead- Acid Storage Batteries for Motor Vehicles with Light weight and High Cranking Performance 1/3 conforming to IS:14257/1995, Lead- Acid Storage Batteries for Motor Vehicles conforming to IS:7372/1995 Nominal Voltage of Battery (volts) 12.0 Volt 2.0 Volt, 6.0 Volt, 12.0 Volt Material of container Fibre Reinforced Plastics (FRP) Hard Rubber, Fibre Reinforced Plastics (FRP), Polypropylene, ABS Rated Capacity at C20 discharge (AH) 7 Warranty (Years) 1 Year 1 Year, 2 Years, 3 Years, 4 Years, 5 Years Battery Condition Dry Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) STANDARD - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - No.of cells per Battery (No.) 6 Cells for 12 Volt battery - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab EXIDE INDIA - Name of the Lab EXIDE INDIA - Test Report No. NA - Test Report Date NA - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for YES - 2/3 Batteries made from them for use in portable applications * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Narender Mohan 110095, Institute of Human Behaviour & Allied Sciences (IHBAS), Autonomous Academic Institute under Govt. of NCT of Delhi, General Store, Dilshad Garden Delhi-10095 97 15
hopper or tipper Average Turn Over of Last 3 Years 16 Lakh (s) Hopper Or Tipper ( 5 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Garbage Tipper Type of TIPPER if other tipper, please declare type of Tipper, * Main Engine Capacity (cc) 2956 * Make of Chassis - * Type of Chassis Frame - * Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl * Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( 18.5 Any applicable numeric 1/8 declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) value Speed, Max (Km/Hr) 60 * Max Engine Power BHP (BHP@rpm) 97.2 Any applicable numeric value Max Engine Torque (N-M@rpm) 300 Any applicable numeric value Main Engine Aspiration Natural Aspiration Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 4 Any applicable numeric value Fuel Tank Capacity (Ltrs) 60 Any applicable numeric value Gradeability of Vehicle with load( %) 18 * Gradeability of Vehicle without load ( %) 28 * Ground Clearance (mm) 170 Any applicable numeric value Wheel Base (mm) 2750 * Kerb Weight (Kg) 2200 Any applicable numeric value Gross Vehicle Weight (Kg) 4450 Any applicable numeric value No of Axle (Nos) 2 * Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - * Type of Front Axle and Suspension System - * Type of Rear Axle and Suspension System - * Type of BIS MARKED Vehicle Tyre Tube * Chassis Transmission System Automatic Automatic, Manual Number of Speed Forward Gears 5 * 2/8 Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 5950 Any applicable numeric value Speed Governers yes * ABS Fitted No * Front Vehicle Brake - * Rear Vehicle Brake - * Type of Clutch - * Tipping Angle (Degree) 45 45-9999999 Tipper Container cap acity/Volume(cubic metres) 3 3 Certification Chassis Certification ARAI/VRDE/ICAT No. - * Performance Parameters Standard Sparewheel and Tool Kit Yes * Warranty Time (Month) 12 * No. Of Free Service (Nos) 3 * Battery Warranty (Months) 12 * Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3250 * Width of Chassis (mm) 1550 * Height of Chassis (mm) 550 * Size Of Front Tyres (mm) - * Size Of Rear Tyres (mm) - * Size of Wheel (mm) 15 Any applicable numeric value Tipper body Pivot length (mm) 3250 * Tipper body Length (mm) 1550 * Tipper Body Height (mm) 550 * Overall Height of Tipper from Ground (mm) 1990 * 3/8 Body Plate Thickness (mm) 2 1.5-9999999 Main Frame Thickness (mm) 2 Any applicable numeric value Pneumatic System false * Hydarulic System true * Tipping Hydraulic Cylinders(Make) - * Hydraulic System Driven by Power Pack Unit * Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false * If Yes Auxiliary Diesel Power (HP@rpm) 0 Any applicable numeric value Auxiliary Diesel Engine Transmission - * Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 Any applicable numeric value No. of Cylinders in Auxiliary Diesel Engine 0 * Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Any applicable numeric value Dumping Height (mm) 550 Any applicable numeric value Engine Oil Pressure Level Indicator in Control Panel true * Fuel Gauge Indicator in Control Panel true * Engine Cooling Liquid Temperature Indicator in Control Panel true * Operating Hour Meter false * Locking/Unlocking of Tipper Discharge Container Yes * Lowering/Lifting of Tipper Discharge Container Yes * 4/8 Counter Weight false * If yes Counter Weight (kg) 0 * Paint Automotive Paint * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jitendra Shivaji Vichare 415612, Ratnagiri Municipal Council Jayastambh Ratnagiri 5 15
waste containers or rigid liners- Dust bin or Garbage Bin or Household Bin Experience with Gov. Required 1 Year (s) Waste Containers Or Rigid Liners- Dust Bin Or Garbage Bin Or Household Bin ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Utility Domestic Domestic, Public (Mobile containers confirming IS: 12402) ISI Marked yes yes, No CM/L No (If ISI Marked Yes) (If No write NA) Yes - Class confirming to IS:12402 (For Public Dustbins) Type B (with 4 pivoting castors) - Material LLDPE HDPE, LDPE, LLDPE, Corr osion free sheet metal, Stainless steel, Stainless Steel (with inner Plastic lining/bin) CAPACITY Bin Capacity (Volume) (Ltrs) 100 Litres As per GeM Catalogue. DIMENSIONS Wheel Dimension in (mm) (Diameter x Thickness ) (mm x mm) N.a. mm × mm - Weight of Dustbin (Complete unit) 5000 grams - 1/3 (Grams) CONSTRUCTIONAL Colour other than green/blue - Wheel Lock Without - Load carrying Capacity (Kgs) 75 kg - Wall Non- Perforated - Lid Swing type - Handle Without - Wheel Without - Wheel Material Without - Towage Provision yes - Gripping Provision Frontal - Plugged outlet for washing & draining With - UV Resistant yes - Dust Bin stand with - No. of Compartments in the Bin single - CERTIFICATIONS Availability of Test Reports from Central Government/NABL/IL AC acredited Lab to prove conformity to the specifications yes - Test report number 2018 - Test report date 2018 - Name and address of lab Neelkamal - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prashant Dattatry Kumre 431804, muncipal council kinwat 3 15
Portable Fire Extinguishers IS 15683 Experience with Gov. Required 1 Year (s) Portable Fire Extinguishers IS 15683 ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Conformity to Standard IS:15683:2006 With Latest Amdmnt. - Type Stored Pressure Stored Pressure, Gas Cartridge Type Extinguishing Media Carbon Dioxide Based Water Based, Foam Based, Powder Based, Carbon Dioxide Based, Clean Agent Expellant Medium CO2 Extinguishing Medium CO2 Cartridge Based, N2 Based (Stored Pressure), CO2 Extinguishing Medium Constructional Foam Based Extinguishing Media NA - Powder Based Extinguishing Media NA - Clean Agents Based Extinguishing Media NA - Foam Based Fire Extinguisher Capacity(Ltrs) NA 2, 4, 6, 9, NA Powder Based Fire Extinguisher NA 1, 2, NA 1/4 Capacity (Kg) Carbon Dioxide Based Fire Extinguisher Capacity (Kg) 2 2, 3, 4.5, NA Water Based Fire Extinguisher Capacity NA 2, NA Clean Agents Fire Extinguisher Capacity (Kg) NA 2, NA Weight of Filled Portable Fire Extinghuisher (Kg) 7 Rechargebale true - Color Coding Red - Fire Extinguisher Suitable for Class -A Fire false - Fire Extinguisher Suitable for Class -B Fire true - Fire Extinguisher Suitable for Class -C Fire true - Fire Extinguisher Suitable for Class -D Fire false - Fire Extinguisher Suitable for electrical Fire true - Performance Operating Temperature (° C) -30° C to + 55° C - Test pressure/Burst Pressurire Extinguisher except CO2 NA - Test pressure/Burst pressure for CO2 type Extinguisher (write NA if not applicable) NA - Discharge Range for Extinguisher (Meters) >=1 for Class-B - Effective Discharge Time for Fire Extinguisher, Min (Seconds) 8 seconds Fire Rating for Class -A Fire Extinguisher NA - 2/4 Fire Rating for Class -B Fire Extinguisher 8B - Certification BIS Marking Yes - CM/L No.* with Validity Period - - Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES - Test Report No - - Test Report Date - - Name of the Lab - - Address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prashant Dattatry Kumre 431804, muncipal council kinwat 10 15
hopper or tipper Average Turn Over of Last 3 Years 100 Lakh (s) Experience with Gov. Required 3 Year (s) Hopper Or Tipper ( 5 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, * Main Engine Capacity (cc) 1396 * Make of Chassis - * Type of Chassis Frame - * Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl * 1/6 Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 17.88 Any applicable numeric value Speed, Max (Km/Hr) 80 * Max Engine Power BHP (BHP@rpm) 71 Any applicable numeric value Max Engine Torque (N-M@rpm) 140 Any applicable numeric value Main Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turbocharged, Supercharged, Turbocharged+ Supercharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 4 Any applicable numeric value Fuel Tank Capacity (Ltrs) 38 Any applicable numeric value Gradeability of Vehicle with load( %) 71 * Gradeability of Vehicle without load ( %) 140 * Ground Clearance (mm) 24.93 Any applicable numeric value Wheel Base (mm) 2380 * Kerb Weight (Kg) 25.2 Any applicable numeric value Gross Vehicle Weight (Kg) 2255 Any applicable numeric value No of Axle (Nos) 4 * Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - * Type of Front Axle and Suspension System - * Type of Rear Axle and Suspension System - * Type of BIS MARKED Vehicle Tyre Radial * 2/6 Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 * Type of Steering Power Operated Manual, Power Operated Turning Radius, Min (mm) 5100 Any applicable numeric value Speed Governers yes * ABS Fitted No * Front Vehicle Brake - * Rear Vehicle Brake - * Type of Clutch - * Tipping Angle (Degree) 48 45-9999999 Tipper Container cap acity/Volume(cubic metres) 3.2 0.5-10.5 Certification Chassis Certification ARAI/VRDE/ICAT No. - * Performance Parameters Standard Sparewheel and Tool Kit Yes * Warranty Time (Month) 18 * No. Of Free Service (Nos) 3 * Battery Warranty (Months) 12 * Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 4340 * Width of Chassis (mm) 1594 * Height of Chassis (mm) 1858 * Size Of Front Tyres (mm) - * Size Of Rear Tyres (mm) - * Size of Wheel (mm) 14 Any applicable numeric value Tipper body Pivot length (mm) 1546 * Tipper body Length (mm) 2695 * 3/6 Tipper Body Height (mm) 1082 * Overall Height of Tipper from Ground (mm) 1801 * Body Plate Thickness (mm) 2 1.5-9999999 Main Frame Thickness (mm) 4 Any applicable numeric value Pneumatic System false * Hydarulic System true * Tipping Hydraulic Cylinders(Make) - * Hydraulic System Driven by Main Engine * Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false * If Yes Auxiliary Diesel Power (HP@rpm) 0 Any applicable numeric value Auxiliary Diesel Engine Transmission - * Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 Any applicable numeric value No. of Cylinders in Auxiliary Diesel Engine 0 * Tipper Container Material Mild Steel Mild Steel, Stainless Steel, Aluminium, Chromium Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Any applicable numeric value Dumping Height (mm) 551 Any applicable numeric value Engine Oil Pressure Level Indicator in Control Panel true * Fuel Gauge Indicator in Control Panel true * Engine Cooling Liquid Temperature Indicator in Control Panel true * Operating Hour Meter false * Locking/Unlocking of Yes * 4/6 Tipper Discharge Container Lowering/Lifting of Tipper Discharge Container Yes * Counter Weight false * If yes Counter Weight (kg) 0 * Paint Automotive Paint * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Prashant Dattatry Kumre 431804, muncipal council kinwat 5 15
dewatering pumps Dewatering Pumps ( 20 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Dewatering Pump set DEWATERING PUMPS Or ENGINE MONOSET PUMPS generally incompliance to IS 11501 : 1986 (REAFFIRMED 2016) Complete unit including pump & engine duly coupled along with auto prime system, fuel tank etc shall be mounted on a two wheeled trolley for easy transportability, The trolley shall be equipped with Leaf Springs for Suspension, Support for Rear end and Towing Bar, Parking Breaks etc and The trolley must have minimum ground clearance of 300 mm, below leaf spring * 1/6 Type of pump Back Pull Out * Model Number of Pump 17-18 * Service/Duty Continuous * Location Outdoor * Fuel supply Fuel Pump by Gravity Feed through Tank * Starting Hand Start Hand Start, Battery Start, Both CONSTRUCTIONAL Make of Pump KIRLOSKAR * Casing Granded Cast Iron * Impeller Cast Iron of Grade FG200 of IS210 Cast Iron of Grade FG200 of IS210, Stainless Steel of Grade 04 Cr13 of Is 6603, Stainless Steel of Grade 12 Cr13 of Is 6603, Stainless Steel of Grade 20 Cr13 of Is 6603 Casing and Impeller Wearing Ring If provided otherwise put NA Cast Iron of Grade FG200 of IS210 Cast Iron of Grade FG200 of IS210, Bronze of Grade LT82 of Is 318, Brass, NA Shaft Type Stainless Steel Chrome Steel, Stainless Steel Gland Packing Type Asbestors * Blade Material Stainless Steel Aluminium, Stainless Steel Sleeve Stainless steel Brass, Bronze, Stainless steel Bracket Others Granded Cast Iron, Stainless steel, Others Suction Flange Granded Cast Iron Granded Cast Iron, Others Net Positive Suction Head (NPSH) 45 * Volute Casing Granded Cast Iron * Gland Packing set Threaded Graphite Cotton * One number suitable size suction strainer and Non Return Value to be supplied with each pump Yes * Number of Stages 1 Any applicable numeric value Dimension of Pump Set 1200 X 800 X 400 * 2/6 ( L x B x H )(mm) Weight of Pump Set 100 * Minimum Submerge 38 * Delivery Flange Mild Steel * Material of Trolley MS fabricated * Suction and Delivery Pipe Dimensions ( mm x mm) (mm x mm) 100 X 100 * The engine shall be Vertical, inline, diesel engine capable of continuous operation and must be equipped with 12 volt starter and alternator, control panel, wiring harness for panel fuel pipes and suitable battery Yes * 12 V starting system complete with starter motor, charging alternator and Cutout Yes * Engine Make n.a * Number of Cylinder 1 1, 2, 3, 4 Engine Capacity 12.5 Any applicable numeric value Power input to pump at Duty Point (Kilowatt) 9.33 * Diesel engine be closed coupled and mounted on a base plate robust Yes * Material of Base Plate on which Engine is Mounted Cast Iron * Make of Engine Control panel Others * Engine Control Panel with Following Items i Engine START switch ii Engine oil Pressure meter iii Engine Temperature meter iv Ampere Meter v Emergency Engine Stop Switch Engine oil Pressure meter Vi Engine Hour Meter Vii Fuel Indication meter Viii RPM Meter Yes * 3/6 Safety controls to shutdown the engine in the event of low lub oil pressure or high cylinder head temperature in case of air cooled engines Yes * Exhaust silencer of Residential type application Yes * Rotation: clock wise while facing the flywheel end Yes * Fuel Tank Capacity for min 24 hours continous running at full load 100 * Temperature Rise 30 * Standard set of tools consisting of set of 3 spanners, one screw driver, one standard plier and one nose plier of appropriate engine size shall be provided to the consignee along with, free of cost for each of Pump Set yes * Supply of Auto prime, horizontal, end suction, centrifugal type pumping unit capable handling floating material/soft solids like wooden pieces, muddy water, etc yes * PERFORMANCE Capacity (Rate of Flow) ( m³/hr) 100 50, 100, 150, 200, 250, 300, 600, 900 Total Head (min) Corrsponding to Capacity and Speed (metres) 100 * Speed in RPM (rpm) 1500 * Pump Efficiency at Duty point Corrsponding to Capacity and Speed ( water delivered/Pump Input ) (%) 95 * Lub Oil Consumption (g/k Wh) : (g/k Wh) 0 * 4/6 All rotating parts be dynamically balanced for longer bearing life and vibration free smooth and silent operation yes * The pump shall be capable of developing required head at rated capacity for continuous outdoor operation External conditions like Rain, Snow and humidity should not affect pumping operation yes * The shut off head of the pump shall not less than 12% of head at rated capacity for 3 cusec and 5 cusec pumps having 10 mtrs As duly point head yes * The pump should be capable of starting without external priming and should be capable of operation with least human intervention yes * The pump must have non-overloading characteristics and the prime mover ie engine shall not get overloaded in the entire range of operation yes * CERTIFICATION ISI marked false true, false CM/L No and date - * Availability of Type Test Report for conformity IS as per IS:10, 001latest/IS 1117 0latest/IS:7347latest forEngines, to IS:11501 latest and IS:9137 latest for pumps and other parameters to specification from any ILAC/NABL accredited/Central Govt LAB yes * 5/6 Test cetificate No and Date - * Name and address of the Lab - * Test report and certifications to be furnished to the buyer on demand yes * Warranty (Years) 1 1, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sarvjeet Singh 243001, Bareilley Nagar Nigam 20 15