Loading
Loading…
Loading…
2,847 results • Latest
magnetic stirrers Experience with Gov. Required 10 Year (s) Magnetic Stirrers ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values CONFIGURATION AND FEATURES Number of stirring Positions 1 1, 4, 5, 10, 15 Calibration Automatic Calibration Manual Calibration, Automatic Calibration Type of Drive Motor Brushless Motor DC Brushless Motor DC, Brushless Motor AC, Carbon Brush Motor DC, Carbon Brush Motor AC, Motorless magnetic coil type Display Option/Output Read out Option Analog Analog, Digital, No integral Display Magnetic stirrer is: with a hot plate or some other means for heating the liquid with a hot plate or some other means for heating the liquid, Without any provision for heating liquid Timer Setting (Increment step) (sec) 5 - Minimum Speed Possible (RPM) 100 - Mangnetic stirrer Type fixed speed fixed speed, variable speed 1/5 Controler type Microprocessor Controlled Microprocessor Controlled, Electronicaly controlled IP rating or Ingress protection rating 21 Programmable true true, false Direction change feature true - Speed Control Accuracy of set speed (+/-) (RPM) 5 Maximum Stirring capacity per position 3000 Top plate Material Stainless steel Stainless steel, Ceramic, Polypropylene, ABS, Cast aluminium Timer Provided true - Base material Die cast aluminium - User Interface Analog Front Panel Analog Front Panel, Digital Front Panel Pulse mode true - Type of Data Logging Option RS 232 - Slip Detection true - Last run memory true true, false Yes is better Accessories and spares included in standard pack Standard - CERTIFICATIONS Firm Certified to ISO9001:2008 or latest YES - Product is CE certified (Seller to furnish supporting document to Buyer on demand) true true, false EN/IEC directives CE - Name and Address of the Lab STAR LAB - Availability Of Test Report (to be furnished by Seller to Buyer on demand) from Central Govt/NABL/ILAC accredited laboratory to prove conformity to true - 2/5 specifications Test Report details; Number, date of issue, name and address of issuing laboratory 13456/31.03.2015 - WARRANTY Warranty on Machine 3 3, 5 Higher is better MISC In built-in multi-step safety system to continuously monitor device operation and protect against damage should the operation exceed the pre-determined parameters: Unsafe Hotplate Temperature – Temperatures exceed safety Parameters Unsafe Hotplate Temperature – Temperatures exceed safety Parameters, Probe Failure – Probe Break Or Become Disconnected, Vessel Breakage – Should The Vessel Have A Crack And The Solution Begins To Leak, provision for preventing liquid from damaging equipment Weigh 5.3 - Ambient operating Temperature range 0 to 50 degree Yes - Permissible Relative Humidity (%) 90 - POWER SUPPLY Input Voltage with Phase (V) 220 V, 50 Hz AC, single phase - Input Current (A) 1 - Power Consumption ( 50 - SPEED Speed Mode Fixed Speed Fixed Speed, Variable Speed Speed (RPM) 1500 - Minimum Speed increment step (RPM) 100 - Maximum Speed (RPM) of variable speed mode equipment 1500 - DIMENSIONS External Dimension: Height ) 150 - External Dimension: Width 150 - External Dimension: Depth 150 Body Material Stainless Steel Stainless Steel, Mild Steel, Plastic, Metal Alloy, Die cast 3/5 Aluminium Finish of Body material Powder coated - STIR BAR Stir bar cover material PTFE - Stir Bar length 8 - TOP PLATE Top plate area shape Rectangular - Length of rectangular top plate area 320 - Width of rectangular top plate area 280 - Circular Top plate diameter 250 - Top plate Finish Ceramic coated Ceramic coated, Silicon coated, PTFE coated * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pratima Srivastav 324001, JDB govt girls college, Nayapura Kota 1 15
barbed wire Barbed Wire ( 10000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conforming to Indian Standard IS:278 latest - Barbed Wire Type Type B Type A, Type B CONSTRUCTIONAL Size Designation as per ISS 1 1, 2, 3, 4, 5, 6 Type of Zinc Coating Hot Dip Galvanized Heavy Coating Conforming to IS:4826 Hot Dip Galvanized Heavy Coating Conforming to IS:4826, Hot Dip Galvanized Medium Coating Conforming to IS:4826, Hot Dip Galvanized Light Coating Conforming to IS:4826, Electro Galvanized Heavy Coating Conforming to IS:12753, Electro Galvanized Medium Coating Conforming to IS:12753, Electro Galvanized Light Coating Conforming to IS:12753 Chromating With - Net Weight of Barbed Wire in One 30 1/3 Reel, (Kg) PACKAGING Reel Metal - Packing Hasian Cloth - Gross Weight (Approx.) of One Reel including Barbed Wire, (Kg) 35 - CERTIFICATION ISI marked Yes Yes CM/L No - - Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab covering all the declared parameters as per IS specification Yes - Test Report No and Date - - Name and Address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Deepak Kumar Gupta 325205, DCF BARAN 10000 15
Refrigerated micro-centrifuge Refrigerated Micro-centrifuge ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values SET 1 Microprocessor controlled High speed Micro centrifuge Yes - Maximum permissible Speed (RPM): - - Relative Centrifugal Force (RCF), Max: 20, 000 x g to 22, 000 x g - Temperature Range - 10 degree C to +40 degree C - Refrigeration System: Must be CFC free. - Display for Speed, RCF, Temperature and Time parameters: Yes - Type of Display: LCD display LCD display, LED display Facility for short run operation Yes - Imbalance System and Selectable acoustic Alarms Yes - Running Modes available: soft/fast accelerate, decelerate and break off mode Yes - 1/3 Operation of equipment: By keypad operations By simple knob(s), By keypad operations Angle rotor Polypropylene/metallic 24 x (15/10) ml or Dual row rotor with same capacity/volume Yes - Lid Aerosol tight Polysulfone or equiv. Lid - Certification: CE(European) US FDA, CE(European) Adopter for PCR tube sizes: 0.2 ml and 0.5 ml - Time Selection: 1 to 99 min or continuous - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sunil Dutt Shukla 313001, Government Meera Girls College, Meera Marg, Sardarpura 2 15
Public place seating chair Average Turn Over of Last 3 Years 11 Lakh (s) Experience with Gov. Required 6 Year (s) Public Place Seating Chair ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of Seating separate seat and backrest - Style with arm and backrest with arm and backrest, with arm and without backrest, without arm and with backrest, without arm and backrest Seating Capacity (Nos) 3 2, 3, 4, 5 Number of arms (Nos) 2 - Delivery status Assembled - Seat Cushion WITH CUSHION - Backrest Cushion WITH CUSHION - MATERIAL Material of Main Frame mild steel mild steel, M S ERW tube, SS 202, SS 304 Material of Seat and Backrest PU Foam reinforced with 2 mm M S sheet inserts Mild Steel, PU Foam reinforced with 2 mm M S sheet inserts, SS 304, MS RECTANGULAR SECTION PIPE, 1/4 Perforated MS sheet covered with 40 mm cushion cover. Material of Arms cold rolled steel armrest are made up of powder coated high pressure aluminium dye cast, cold rolled steel, MS ERW TUBE, MS RECTANGULAR SECTION PIPE Material of Legs cold rolled steel cold rolled steel, POWDER COATED HIGH PRESSURE ALUMINIUM DYE CAST LEGS, MS round pipe - 1.6 mm thick Material of Side Bar Bracket made up of chrome plated solid steel - Thickness of material of Main Frame in mm 1.2 - Thickness of material of Arms in mm 1.2 - Type of bolts M8 bolts - Thickness of PU Foam for Seat and Backrest ±2(mm) 20 mm - Density of PU Foam for Seat and Backrest ±2(Kg/Cubic Metre) 30 kg/Cubic Meter - Covering Material for Seat and Backrest NA - DIMENSION Overall Length in mm (±10 mm) 1655 As per GeM Catalogue. Overall Depth in mm ( ±5 mm) 500 As per GeM Catalogue. Overall Height in mm (±5 mm) 760 As per GeM Catalogue. Seat Height from Floor in mm (±5 mm) 425 mm - Thickness of material of Seat and Backrest (mm) 1.2 mm - CERTIFICATION Conforming to International YES YES, NO 2/4 Standard for Public Seating (*BIFMA X 5 dot 4 or equvalent) COLOUR & FINISH Colour of Covering Material black - All M S Strucure Finish Powder Coated - Colour of Paint black - All steel component to be epoxy powder coated 50 micron thick - WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 5 MISC Seat and Backrest are Perforated true - Adjuster for legs false - Arms Chrome Plated true - Legs Chrome Plated true - Cushion on Arms false - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Suresh Chandara Chanderiya 311001, M. L. V. Government College Kasipuri Bhilwara 15 15
Air Conditioner Air Conditioner ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/GENERIC Type of Air conditioner High wall Split AC High wall Split AC Technology of AC Non- Inverter (Fixed Speed) Non- Inverter (Fixed Speed) Nominal cooling capacity in Ton (kcal/hr) 1.5 Ton/4500 kcal/hr 1.5 Ton/4500 kcal/hr Coil Material Copper Copper Eco-friendly refrigerant true true Yes is better Minimum length of copper pipe and suitable connecting electrical cable for installation and commissioning 3 metre - Packing LIst box packling - Any other Features Easy to install - CONFORMITY CERTIFICATION BEE Star Rating 3 1, 2, 3, 4, 5, NA Conformity to Indian Standard IS 1391 latest - WARRANTY Warranty on Machine 1 1, 5 1/3 Warranty on Compressor 5 5, 6, 7, 8, 9, 10 Higher is better INSTALLATION Installation and commissioning With Installation and Commissioning With Installation and Commissioning * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Santosh Kumar Jhariya 491001, O/o Executive Engineer, PWD (E&M) Division, durg 2 15
Air Conditioner Average Turn Over of Last 3 Years 8 Lakh (s) Air Conditioner ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/GENERIC Type of Air conditioner High wall Split AC High wall Split AC Technology of AC Non- Inverter (Fixed Speed) Non- Inverter (Fixed Speed) Nominal cooling capacity in Ton (kcal/hr) 1.5 Ton/4500 kcal/hr 1.5 Ton/4500 kcal/hr Coil Material Copper Copper Eco-friendly refrigerant true true Yes is better Minimum length of copper pipe and suitable connecting electrical cable for installation and commissioning 3 metre - Packing LIst MANUAL, REMOTE, WARRANTY CARD, INDOOR UNIT, OUTDOOR UNIT - Any other Features Power Chill, Coanda Airflow, White Colour - CONFORMITY BEE Star Rating 3 3 1/3 CERTIFICATION Conformity to Indian Standard IS 1391 latest - WARRANTY Warranty on Machine 1 1.0 Warranty on Compressor 5 5.0 Higher is better INSTALLATION Installation and commissioning With Installation and Commissioning With Installation and Commissioning * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Amitkumar Chandulal Dave 360005, Saurashtra University Dolarrai Mankad Marg Kalavad Road 6 15
biometric identification equipment Biometric Identification Equipment ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type Fingerprint Scanner Device for use with Desktop, Laptop, Tablet, POS Device etc. Fingerprint Scanner Device for use with Desktop, POS Device etc., Iris Authentication Device for use with Desktop, POS Device etc. Certification for Device and extractor software/SDK STQC Certified - API/SDK Linux Windows 7 and above (including Windows based Mobile Phone), Android 4.0 and Above, Linux Integrated USB 2.0 and above Connector Yes - Connector Cable to connect the Device to Micro USB & Standard USB Yes - UIDAI Certified Registered Device (Copy of the certificate to be furnished when Yes - 1/3 demanded by buyer) Conformity to the "Terms and Conditions of UIDAI Certified Registered Device" Yes - Warranty (Years) 1 1, 2, 3, 4 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Laxman Hanmanta Chalwadi 413001, Solapur Municipal Corporation, Computer Department, Dr.Babasaheb Ambedkar Chowk (Park Chowk) Solapur 50 15
Clinical incubators or infant warmers Clinical Incubators Or Infant Warmers ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values Definition and Clinical Purpose Definition Mains electricity (AC- powered) mobile device that contains an infrared (IR) heating element(s) designed to emit controlled, evenly distributed overhead heat to the body of a newborn/infant patient requiring supplemental heat. This device is equipped with wheels so that it can easily be moved to different areas of a room, ward, or department. - Clinical purpose &Overview of functional requirements It is an electrically powered device with a radiant heating source intended to maintain the thermal balance of an infant by direct radiation of energy in the infrared region of the electromagnetic spectrum. It is a microprocessor controlled unit with - 1/8 heater placed on the over head panel. This work on both servo and manual mode options to maintain the baby temperature at the set value. There are two modes of operation manual and baby (servo) mode. It has Digital displays reading the set and baby observed temperatures seperately. Technical Characteristics (specific to this type of device) facility to display skin set, skin observed temperature in degree C and heat power separately true - have user friendly touch panel control Yes - Type of heater: ceramic ceramic, quartz infrared, calrod heater Audiovisual alarm facility for: Overheating beyond set temperature range, Spurt in Heater output i.e. more than 60% heater output for 10 minutes system should raise alarm and cutoff heater, Power failure, Heater failure, Patient temperature less/Greater than required/set temperature, Probe failure Overheating beyond set temperature range, Probe failure Warmer head should be rotatable in different direction, so as to allow taking X-ray true true, false Yes is better Observation light Luminance and Colour temperature > = 1000 Lux, Colour temperature range from 3700K to 5100K - Battery back up facility for Power failure indication during power fail Yes - desired temperature range 25 to 40 degree C - 2/8 setable temperature 32 to 38 deg C 32 to 38 deg C - temperature resolution should be: <= 0.1 degree C - Temperature accuracy should be <= 0.2 degree C - facility to lock the keyboard to avoid unwanted user modification of the set parameters Yes - should have separate Bassinet trolley, bed should be tilt-able and have suitable provision for x-ray cassette holder, Mattress foam density should be minimum 25 kg/cm3, transparent collapsible side walls easily detachable for cleaning Yes - Should have a Feather Touch operation with large digital display and comprehensive alarms, Control Panel should be liquid proof and allow easy and hygienic disinfection Yes - Manual Mode can adjust Heater Output 10 -100 %, with 10% increment, an auditory and visual alarm shall be given at least every 15 min Yes - Under manual mode, heater cut off/switch off, if the maximum irradiance at any point of the mattress area exceeds a total irradiance level of 10 mW/cm2 (between 10 to 30 minutes) Yes - Bed height from Floor - - Bed Distance from the heat source - - should have lockable castor wheels Yes - 3/8 Green indicator light shall be indicate that warmer is ready for normal use Yes - Markings on the bassinet and X-Ray cassette holder to enable proper positioning of the baby while doing the X-Ray Yes - Number of tubing ports (edges covered by silicon rings) on the side walls (For cable management) 4 - Height of the side walls over the mattress 110 - Provision of X-Ray cassette tray of at least 750 mm X 350 mm size, suitable to adopt <= 20mm thick X-Ray cassette Yes - bay bed should be crevice free for ease of cleaning, infection control Yes - mattress used should be of biocompatible material Yes - Skin temperature probe should be small in size [Diameter <= 10 mm & Height <= 4 mm] with biocompatible Baby contact material Yes - Mobility, portability On castors (2 of the castors should have brakes) & Castor size >= 4 inch. - Settings Settings with facility to clearly display the selected mode, Option of Selecting either Manual mode and Baby (Servo) mode settings, Provision for Set temperature range (in servo mode) from 32 to 38 deg C Yes - User's interface Manual and Servo controlled temperature - 4/8 regulation Software and/or standard of communication(where ever required) LED Display and inbuilt software; Interruption and restoration of the power supply does not change the preset values - Others: 1. Device shall not overbalance when placed in any transport position of normal use on a 10° inclined plane from the horizontal plane. 2. Transformers of devcie shall be protected against overheating in the event of short circuit or overload of any output winding. 3. Patient leakage current should be less than 100 μA in normal condition 4. Temperature on the baby mattress should not exceed 43 deg C when the warmer is operating under steady temperature condition 5. Temperature of HEATER GUARDS should not exceed 85 °C in normal use. 6. The Temperature differences on the mattress shall not exceed 2 °C. - PHYSICAL CHARACTERISTICS Overall Height of equipment 1000 - Overall Width of equipment - - Overall Length of equipment - - Overall weight of equipment - - Heat source Configuration >= 60 degree angle adjustment must be possible in the heat source, it should provide shielding to the infant in case of breakage of tubes/bulbs and all surfaces to be made of - 5/8 corrosion resistant material Noise Auditory alarm shall have a sound level of at least 65 dBA at a distance of 3 m from the front of the infant radiant warmer, and the sound level of the alarm shall not exceed 80 dBA on the mattress - Heat dissipation Should maintain desired set temperature and uniform heat distribution in baby cradle - ENERGY SOURCE Power Requirements 220 to 240V, 50 Hz AC, ± 10% of input - Battery operated Power failure indication during power fail - Protection OVP, earth leakage protection - Power consumption 600 - Compatible to alternate energy supply source; Solar Heating in addition to AC power source): true true, false Yes is better Thermal reflector to fix the skin probe >= 50 units to be supplied with each equipment unit - ENVIRONMENTAL AND DEPARTMENTAL CONSIDERATIONS Atmosphere Ambiance Operating condition: -Capable of operating continuously in ambient temperature of 0 to 50 deg C and relative humidity of 15 to 90% in ideal circumstances. - an ambient air velocity is less than 0.3 m/s. - User's care, Cleaning, Disinfection & Sterility issues Complete unit to be easily washable and sterilizable using both alcohol and chlorine agents. - STANDARDS AND SAFETY Certificates, US FDA, CE European - Performance and safety standards (specific to the device type); Local IEC-60601-1-2:2007 Medical electrical equipment Part 1-2: - 6/8 and/or international General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility -Requirements and tests (Or Equivalent BIS). Shall neet IEC 60601 -2- 21: 2009 Medical Electrical Equipment - Part 2¬21: Particular Requirement for the basic safety and essential performance of infant radiant warmers . should meet IEC 60601-1:2005(or latest) standard requirements. Baby contact material should be biocompatible. Manufacturer should be ISO 13485 certified Availability of Type Test report from any Govt/NABL accredited iLAC approved laboratory (To be produced by Seller on Buyer's demand if indicated available) true - TRAINING AND INSTALLATION Pre-installation requirements for the equipment Availability of 5 amp/15 Amp. Electrical socket (2 nos) for each warmer at Buyer's facility. - Documentation required to be provided by Seller: User & Operating manual, Certificate of Calibration, Factory inspection report, user training manual - WARRANTY Warranty Scope Shall be onsite and comprehensive i.e. with free service and spares - Warranty period for equipment(Other than nickel chrome wire filament and tube of quartz, that shall have lifetime warranty) 3 3, 5 Higher is better * Bold specifications are the golden parameters. 7/8 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ram Krishna Bhatt 228001, MEJARFGANJ SULTANPUR 6 15
Microscopes - Pathological and Research Experience with Gov. Required 10 Year (s) Microscopes - Pathological And Research ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values CONFORMITY/TYPE EYE PIECE - OBJECTIVE DETAILS Microscope Type pathological monocular hinged type without built in light and without light intensity regulator pathological monocular hinged type without built in light and without light intensity regulator, pathological monocular non hinged type with built in light and with light intensity regulator, pathological binocular non hinged type with built in light and with light intensity regulator, research binocular non hinged type with built in light and with light intensity regulator, Research Trinocular - Non-Hinged type -with built-in light and with light intensity regulator Conformity to Indian Standard Pathological IS:4381 latest - ISI MARKED false true, false Eye piece Type Huygenian Huygenian, Compensating 1/4 Binocular Eye pieces Confirming to the requirements of IS: 8275/1976 ( latest) 'NA' for Monocular - Eye Piece with magnification monocular 15 x monocular 5 x, monocular 10 x, monocular 15 x, set of two for binocular 5 x, Set of Two For Binocular 10x Objective Type semiapochromatic achromatic, semiapochromatic, Apochromatic Objective Magnification 40 x 10 x, 20 x, 40 x, 45 x, 90 x, 100X Numerical Apperture of Objective 1.25 0.25, 0.5, 0.65, 1.25 Type of lamp for Illumination 'NA' for Hinged type - GENERIC Plano Concave mirror attachment NA - Stage Circular - Size of Stage 120MM - Coarse and Fine Movement of stage yes - Co-axial focussing true - Micrometer Arrangement true - ACCESSORIES Extra eyepieces (inclusive in the scope of supply) 10 x 5 x, 10 x, 15 x, set of two 5 x, set of two 10 x, set of two 15 x, NA Carrying case (inclusive in the scope of supply) yes - WARRANTY Warranty 4 1, 2, 3, 4, 5 Higher is better CERTIFICATION Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification false - Test Report No and Date NA - Name and Address of the Lab NA - * Bold specifications are the golden parameters. Consignees and Quantity 2/4 S.No. Consignee Address Quantity Delivery Days 1 Pratima Srivastav 324001, JDB govt girls college, Nayapura Kota 2 15
Microscopes - Pathological and Research Experience with Gov. Required 10 Year (s) Microscopes - Pathological And Research ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values CONFORMITY/TYPE EYE PIECE - OBJECTIVE DETAILS Microscope Type research binocular non hinged type with built in light and with light intensity regulator pathological monocular hinged type without built in light and without light intensity regulator, pathological monocular non hinged type with built in light and with light intensity regulator, pathological binocular non hinged type with built in light and with light intensity regulator, research binocular non hinged type with built in light and with light intensity regulator, Research Trinocular - Non-Hinged type -with built-in light and with light intensity regulator Conformity to Indian Standard Pathological IS:4381 latest - ISI MARKED false true, false C/ML No ( BIS License No) NA - 1/4 Eye piece Type Compensating Huygenian, Compensating Binocular Eye pieces Confirming to the requirements of IS: 8275/1976 ( latest) yes - Eye Piece with magnification Set of Two For Binocular 10x monocular 5 x, monocular 10 x, monocular 15 x, set of two for binocular 5 x, Set of Two For Binocular 10x Objective Type achromatic achromatic, semiapochromatic, Apochromatic Objective Magnification 100X 10 x, 20 x, 40 x, 45 x, 90 x, 100X Numerical Apperture of Objective 1.25 0.25, 0.5, 0.65, 1.25 Type of lamp for Illumination 'NA' for Hinged type - GENERIC Plano Concave mirror attachment yes - Stage Ractangular - Size of Stage 120x125mm - Coarse and Fine Movement of stage yes - Co-axial focussing false - Micrometer Arrangement true - ACCESSORIES Extra eyepieces (inclusive in the scope of supply) NA 5 x, 10 x, 15 x, set of two 5 x, set of two 10 x, set of two 15 x, NA Carrying case (inclusive in the scope of supply) yes - WARRANTY Warranty 2 1, 2, 3, 4, 5 Higher is better CERTIFICATION Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification false - Test Report No and Date NA - Name and Address of the Lab NA - 2/4 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pratima Srivastav 324001, JDB govt girls college, Nayapura Kota 1 15
domestic refrigerators Domestic Refrigerators ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standrad IS:15750(2006) for Frost Free IS:15750(2006) for Frost Free ISI marked false - CML No. 0 - Capacity and Design features Storage Volume(NET CAPACITY) (Litres) 300 300 Type of Door Double Single, Double Insulation others others Built in Voltage Stabilizer Yes - Method of Defrosting Frost Free Direct Cool, Frost Free Performance BEE Star Rating as on date 3 2, 3, 4, 5 Eco-friendly refrigerant yes - Compressor Power saver Compressor - Voltage Range at 43 degree Centigrade (Volts) 230 (tolerance 10%) - Material Coil Material Copper (Cu) Copper (Cu), Aluminium (Al) 1/2 Finish and Colour Type of Finish Metallic Metallic, Matt, Printed Design Colour Silver As per GeM Catalogue. * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Harikesh Meena 322241, Govt. Girls College, Karauli Near Circuit House Main Road, Karauli, Rajasthan 322241 1 15
automatic line voltage corrector or step type auto transformer Automatic Line Voltage Corrector Or Step Type Auto Transformer ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped GENERIC Conforming to IS:8448 latest Yes - Rating in KVA 2.0 KVA 2.0 KVA ISI Marked Yes Yes, No ISI Marked if Yes CM/L No. (If No write NA) NO - Type of winding Copper Copper, Aluminium Input Single Phase sine wave (160V-260V) Single Phase sine wave (160V-260V), single Phase Sine wave (120V-280v) Display Type of Meter Digital Volt Meter analog Volt Meter, Digital Volt Meter CONSTRUCTIONAL Mounting Type Floor mounting - Current rating of the Relay/contactors (Amp) Conforming to IS:8448 latest - Overall weight of ALVC (Kg) 5 KG - Provision of power supply cord/terminal as applicable for input Yes - 1/3 and output as per IS:8448 FUNCTIONAL Output Single Phase sine wave (210V-250V) - Overall efficiency of ALVC (%) >/= 95% - The product shall conform to the acceptance tests as per Cl. 12.1.1 of IS:8448 latest Yes - CERTIFICATIONS Availability of Type Test Report from Central Govt. NABL/ILAC Accredited lab to prove conformity to the Specification IS:8448 latest Yes - Type Test report No. VMS 001 - TTC report date 10/01/2018 - Name of Lab VMS LAB - Address of Lab SK ROAD CHENNAI - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Harikesh Meena 322241, Govt. Girls College, Karauli Near Circuit House Main Road, Karauli, Rajasthan 322241 8 15
Portable Fire Extinguishers IS 15683 Portable Fire Extinguishers IS 15683 ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Conformity to Standard IS:15683:2006 With Latest Amdmnt. - Type Stored Pressure Stored Pressure, Gas Cartridge Type Extinguishing Media Powder Based Water Based, Foam Based, Powder Based, Carbon Dioxide Based, Clean Agent Expellant Medium N2 Based (Stored Pressure) CO2 Cartridge Based, N2 Based (Stored Pressure), CO2 Extinguishing Medium Constructional Foam Based Extinguishing Media NA - Powder Based Extinguishing Media ABC - Clean Agents Based Extinguishing Media NA - Foam Based Fire Extinguisher Capacity(Ltrs) NA 2, 4, 6, 9, NA Powder Based Fire Extinguisher Capacity (Kg) 4 1, 2, NA 1/4 Carbon Dioxide Based Fire Extinguisher Capacity (Kg) NA 2, 3, 4.5, NA Water Based Fire Extinguisher Capacity NA 2, NA Clean Agents Fire Extinguisher Capacity (Kg) NA 2, NA Weight of Filled Portable Fire Extinghuisher (Kg) 6.5 Rechargebale true - Color Coding Red - Fire Extinguisher Suitable for Class -A Fire true - Fire Extinguisher Suitable for Class -B Fire true - Fire Extinguisher Suitable for Class -C Fire true - Fire Extinguisher Suitable for Class -D Fire false - Fire Extinguisher Suitable for electrical Fire true - Performance Operating Temperature (° C) -20° C to + 55° C - Test pressure/Burst Pressurire Extinguisher except CO2 for water/Foam/Powder type fire extinguisher Test Pressure >=20 Bar, Burst Pressure >=55 Bar - Test pressure/Burst pressure for CO2 type Extinguisher (write NA if not applicable) 35 - Discharge Range for Extinguisher (Meters) >=2 for Class-A - Effective Discharge Time for Fire Extinguisher, Min (Seconds) 10 Fire Rating for Class -A Fire Extinguisher 4A - 2/4 Fire Rating for Class -B Fire Extinguisher 55B - Certification BIS Marking Yes - CM/L No.* with Validity Period - - Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES - Test Report No - - Test Report Date - - Name of the Lab - - Address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anuradha Srivastava 306401, Sgpb Govt. Girls College, Opp Circuit House Taigore Nagar Pali 10 15
Compressed Oxygen Gas and Liquid Oxygen for Industrial use Compressed Oxygen Gas And Liquid Oxygen For Industrial Use ( 35 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conforming to Indian Standards IS:309 Latest Yes - ISI Marked true true, false BIS Licence No 764783 - Item Item Compressed Oxygen Gas Compressed Oxygen Gas, Liquid Oxygen Parameter Oxygen gas is produced by Air Separation Process true true, false Purity Minimum 99 percent by volume when tested in gaseous form - Packing Packing Size Compressed Oxygen in 6-8 cubic Metre Capacity with returnable Cylinders Compressed Oxygen in 6-8 cubic Metre Capacity with returnable Cylinders, Compressed Oxygen in 6-8 cubic Metre Capacity with Non returnable Cylinders, Liquid Oxygen in returnable Insulated Tanker 1/3 Packing and Marking as per Clause 5 of IS 309/2005 or latest Yes - Test Report Availability of Test Reports of from Central Govt./State Govt/NABL/ILAC accredited Lab to prove conformity to the Specification Yes - Test Report No 541384 - Test Report Date 15062018 - Name of the Lab Human Lab Care - Address of the Lab Uttarakhand - Test report to be furnished to the buyer on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ram Krishna Bhatt 228001, MEJARFGANJ SULTANPUR 35 30
Human Resource Outsourcing Service
LED Luminaire (Recessed Luminaire) LED Luminaire (Recessed Luminaire) ( 141 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I - Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 - Rating of Recess type LED Luminaire/System Wattage/Rated Power 36W As per GeM Catalogue. Light Intensity(System Lumens) 80 Lm/Watt Yes - 1/5 for 3000 deg K, 90 Lm/Watt for 4000 deg K, 100 Lm/Watt for 6000 deg K Color temeprature (+/- 500 K) 6000 deg K - Type of fixture (in feet) 2x2(30W to 48W) 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 - Mounting type Recess type - Diffuser material Acrylic - The luminaire body must be corrosion resistant epoxy powder coated/anadozing Yes - All fastners must be of nickel/chrome plated Yes - Number of electronic control gear (power supplies) 2 - Light Source SMD LED Chip as per LM 80/IS16106 - Warranty for free replacement 2 Years - ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC - Rated voltage 230 V AC 50 Hz - AC Power Factor ≥ 0.90 - Driver Efficiency ≥85 - Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% (for above 20W) Yes - The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes - OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, >/=120 Lm/Watt for 4000 deg K, >/=110 Lm/Watt for Yes - 2/5 3000 deg K) Working life for LED : (Minimum 50, 000 burning hours as per LM-80 report) Yes - Colour Rendering Index(CRI) ≥80 - Beam Angle ≥120 - Reflector type Diffuser - THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Junction temperature soldering temperature < 85 deg C - Operating temperature range -10 deg. C to +55 deg. C - Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M ohm - The luminaire shall be protected against surges and transients of >/=2.5 KV Yes - MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed - Each LED liminaire shall have the manufacturer’s name, model number, serial number, date of manufacture (month- year), and lot number as identification mark Yes - 3/5 inside each unit and the outside of each packaging box The operation characteristics such as rated voltage and rated power in watts shall be marked inside each LED luminaire unit Yes - REPORTS AND CERTIFICATIONS LED Make EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/SEOUL SAMSUNG/OSRAM REFOND/NICHIA CREE/LUMILEDS PHILIPS/SYSKA LUMENMAX - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government LAB NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 &TM21(Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the LED Chip being used in the luminaire) Yes - Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller has to furnish Type test report to the Yes - 4/5 buyer on demand DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jagmohan Sharma 134109, Van Bhawan Sector 6 Plot No C 18 Panchkula 141 15
Camera for CCTV System Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 1 Year (s) Camera For CCTV System ( 32 ) Technical Specifications Specification Specification Name Values Allowed Values CAMERA TYPE Type of Camera Housing BULLET CAMERA DOME CAMERA, BOX CAMERA, BULLET CAMERA IP Camera Yes Yes, No PTZ Camera Yes Yes, No IMAGE SENSOR Image Sensor Type CMOS CCD, CMOS Image Sensor Size 0.357 1, 0.67, 0.5, 0.34, 0.25, 0.357, 0.37, 0.4 Higher is better Camera Image Sensing capacity (Picture Mode) 2MP 1MP, 1.3MP, 2MP, 3MP, 4MP, 5MP, 6MP, 8MP Resolution Full HD (1920 x 1080 Pixel) D1 (704 x 480 Pixel), HD (1280 x 720 Pixel), Full HD (1920 x 1080 Pixel), 4K HD (3840 X 2160 Pixel) Day/Night Capable true true, false Yes is better IR illumination Range(mtr) 80 15, 30, 50, 80, 100, 120, 150, NA 1/6 OPTICS Lens Type Fixed - Focal Length(mm) 3.3 - 12 As per GeM Catalogue. Iris Control Yes - Focus Mode Auto, Zooming, One Push, Manual, NA - VIDEO Frame Rate (fps) 25, 60 25, 60 Video Compression H.264, H.265, H.265+, MJ PEG, MPEG4 - Video Streaming Triple compressed stream Dual compressed stream, Triple compressed stream, Quad Compressed Stream PAN/TILT/ZOOM Panning Range 0-360 - Pan Speed (deg/sec) 320 120, 240, 320, NA, 180 Tilt Range below horizontal (deg) 0-90 - Tilt Range above horizontal (deg) 0-5 - Tilt Speed (deg/sec) 120 90, NA Optical Zoom 36X 12X, 20X, 30X, 36X, 44X, NA Digital Zoom 16X 10X, 12X, 16X, NA AUDIO Audio Support true true, false Yes is better Audio Compression G.726, G.722.1, G.711, A- Law, U- Law, MP2L2, AAC, NA - Audio Streaming Two-Way - Number of Audio Input Channel 2 - Number of Audio Output Channel 2 - External Microphone Support true - ALARM Alarm Support true true, false Yes is better Number of Alarm Digital Input 1 - Number of Alarm Relay Output 1 - Pre/Post Alarm Buffer true - SECURITY Multi Level User Yes - 2/6 ID/Password IP Address Filtering true - Encrypted Data Transmission HTTPS (SSL/TSL) - PERFORMANCE Minimum Illumination for Capturing Color Image 0.6 0.6, 0.2, 0.1, 0.05, 0.01 Lower is better Electronic Shutter Speed(sec) 1/50 to 1/10000 - WDR (Wide Dynamic Range) 120 dB 80 dB, 100 dB, 120 dB, DWDR SNR (Signal to Noise Ratio) 70-80 40-50, 50-60, 60-70, 70-80 Auto Exposure Auto Level Control, Electronic Level Control - FEATURES White Balance ( Indoor/Out door/Manual Selectable) Yes - Auto Gain Control (On/Off selectable) Yes - Back Light Compensation Yes - Remote Administration (Remote configuration and status using web based tool) Yes - Remote System Update Over Network Yes - PC Client (PC application client with a channel recording feature support) Yes - Web Client (Viewer through HTTP system configuration) Yes - On Screen Display in English Yes - ONVIF Support Yes - Presets 51 - Group Touring 12 - Privacy Zones 8 - NETWORK AND INTERFACE Supported Protocols UDP, SNMP, IGMP, DHCP, RTP, RSTP, HTTP, SMTP, F TP, ICMP, HTTPS, DNS, DD NS, RTSP, RTCP, NTP, UPn - 3/6 P, QoS, TCP/IP, NA IP Support Static, Dynamic, NA - Signal Processing Digital Signal Process - IPv6 ready Yes - Wireless true - Simultaneous Connections 99 - STORAGE On Board SD Card Support true - SD Card Memory(GB) 256 - HOUSING Installation Type Indoor, Outdoor Indoor, Outdoor Material of the Housing construction Plastic Alluminium, Plastic Protection IP67 - Vandal Resistant Housing Yes - If Yes, IK rating IK 10 - Mounting bracket Wall Mounted - Weight 100 - Dimensions (mm x mm x mm) 2*2*2 - POWER SUPPLY Power Input 24 V DC, 12 V DC, PoE - Power Consumption 25 - Suitable Adapter Shall be Supplied to Make the Equipment Work on 230 V (+/- 10 %), 50 Hz Yes - OPERATING CONDITIONS Operating Temperature Range -20 to +50 deg C - Relative Humidity Non Condensing (%) 95 - WARRANTY/SERVICES Warranty 1 1, 2, 3, 4, 5 Higher is better Time for Replacement of Defective Product During Warranty Period 72 12, 24, 36, 48, 72 Lower is better Supply of Compatible drivers and software included Yes - ENVIRONMENTAL CERTIFICATION Availability of facility & infrastructure for verification of all Yes - 4/6 parameters, features, and capability with Seller Availability of facility to test signal to noise ratio of camera at 0-01 lux Yes - Conformity to Dry Heat test at 55 degree C for 16 hours as per IS :9000 latest Yes - Conformity to Damp heat at 40 degree C - 95% RH (cyclic test): two cycles of 16+8 hours as per IS: 9000 latest Yes - Conformity to Cold test at -10/-20 degree C for 4 hours as per IS: 9000 latest, as applicable Yes - BIS Registration for safety general requirements as per IS 13252 (Part 1):latest Yes - Availability of Type Test Report from Central Govt NABL/ILAC accredited lab to prove conformity to specification true - Test Report Number and Date 1 - Name and Address of Test Lab DELHI - Certification FCC, CE, UL, CB, CSA, NIL - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajnish Chandra Srivastava 335001, GOVERNMENT P.G COLLEGE, HINDUMALKOT ROAD, SRIGNGANAGAR 32 15
LED Luminaire (Recessed Luminaire) LED Luminaire (Recessed Luminaire) ( 476 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I - Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 - Rating of Recess type LED Luminaire/System Wattage/Rated Power 16W 16W Light Intensity(System Lumens) 80 Lm/Watt Yes - 1/5 for 3000 deg K, 90 Lm/Watt for 4000 deg K, 100 Lm/Watt for 6000 deg K Color temeprature (+/- 500 K) 4000 deg K - Type of fixture (in feet) 1x1 (for 3W to 16W) 1x1 (for 3W to 16W), 1x2 (3W to 16W), 1x1 (for 18W to 28W), 1x2 (18W to 28W), 1x4 (30W to 48W), 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 - Mounting type Recess type - Diffuser material Poly carbonate (UV stabilised) - The luminaire body must be corrosion resistant epoxy powder coated/anadozing Yes - All fastners must be of nickel/chrome plated Yes - Number of electronic control gear (power supplies) 1 - Light Source SMD LED Chip as per LM 80/IS16106 - Warranty for free replacement 2 Years - ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC - Rated voltage 230 V AC 50 Hz - AC Power Factor ≥ 0.90 - Driver Efficiency ≥85 - Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% (for above 20W) Yes - The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes - 2/5 OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, >/=120 Lm/Watt for 4000 deg K, >/=110 Lm/Watt for 3000 deg K) Yes - Working life for LED : (Minimum 50, 000 burning hours as per LM-80 report) Yes - Colour Rendering Index(CRI) ≥80 - Beam Angle ≥120 - Reflector type Diffuser - THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Junction temperature soldering temperature < 85 deg C - Operating temperature range -10 deg. C to +50 deg. C - Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M ohm - The luminaire shall be protected against surges and transients of >/=2.5 KV Yes - MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed - Each LED liminaire shall have the manufacturer’s name, Yes - 3/5 model number, serial number, date of manufacture (month- year), and lot number as identification mark inside each unit and the outside of each packaging box The operation characteristics such as rated voltage and rated power in watts shall be marked inside each LED luminaire unit Yes - REPORTS AND CERTIFICATIONS LED Make EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/SEOUL SAMSUNG/OSRAM REFOND/NICHIA CREE/LUMILEDS PHILIPS/SYSKA LUMENMAX - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government LAB NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 &TM21(Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the LED Chip being used in the luminaire) Yes - Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS Yes - 4/5 16107 (Part 2/Sec 1) : 2012 Seller has to furnish Type test report to the buyer on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jagmohan Sharma 134109, Van Bhawan Sector 6 Plot No C 18 Panchkula 476 15
automatic line voltage corrector or step type auto transformer Automatic Line Voltage Corrector Or Step Type Auto Transformer ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped GENERIC Conforming to IS:8448 latest Yes - Rating in KVA 2.0 KVA 0.5 KVA, 1.0 KVA, 2.0 KVA, 3.0 KVA, 4.0 KVA, 5.0 KVA ISI Marked Yes Yes, No ISI Marked if Yes CM/L No. (If No write NA) NO - Type of winding Copper Copper, Aluminium Input Single Phase sine wave (160V-260V) Single Phase sine wave (160V-260V), single Phase Sine wave (120V-280v) Display Type of Meter Digital Volt Meter analog Volt Meter, Digital Volt Meter CONSTRUCTIONAL Mounting Type Floor mounting - Current rating of the Relay/contactors (Amp) Conforming to IS:8448 latest - Overall weight of ALVC (Kg) 5 KG - Provision of power Yes - 1/3 supply cord/terminal as applicable for input and output as per IS:8448 FUNCTIONAL Output Single Phase sine wave (210V-250V) - Overall efficiency of ALVC (%) >/= 95% - The product shall conform to the acceptance tests as per Cl. 12.1.1 of IS:8448 latest Yes - CERTIFICATIONS Availability of Type Test Report from Central Govt. NABL/ILAC Accredited lab to prove conformity to the Specification IS:8448 latest Yes - Type Test report No. VMS 001 - TTC report date 10/01/2018 - Name of Lab VMS LAB - Address of Lab SK ROAD CHENNAI - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shimbhu Dayal Meena 326001, Government P G College Murti Choraha Jhalawar 8 15
diesel generators- DG Sets Diesel Generators- DG Sets ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 125 As per GeM Catalogue. (or higher) No of Phase - Single phase, Three Phase ENGINE Make of Engine - - Model Number of Engine - - Capacity of Engine (cc) - - Engine Power (kWm) - - ISI Marking to IS :10001 for engine false - BIS license No, if applicable - - Type of Engine cooling Liquid Cooled Air Cooled, Liquid Cooled Type of governer Mechanical Mechanical, Electronic (or higher) Class of governer A1 A0, A1, A2 (or higher) Number of cylinders (nos) 6 - No of Strokes (nos) 4 - 1/4 Rated RPM of Engine (RPM) - 1500, 3000 Overload capacity for one hour for every 11 hours continuous running at full load (%) 10 - Specific Fuel Consumption (gm/kWh) - - Starting voltage (volt) 12 - ALTERNATOR AC GENERATOR(ALTER NATOR) Make - - AC GENERATOR(ALTER NATOR) model Number - - Rating of AC Generator (KVA) 125 - Power Factor of AC generator 0.8 - Efficiency at rated Power factor at 75% of full Load 92.2 - Compliance of Alternator to IS:13364(part-1) Yes - Type of alternator Brushless - Voltage Regulation Grade VG 2 - Alternator IP Rating IP 23 - Class of Insulation H - CONTROL PANEL Control Panel AMF Manual, AMF IP Rating of Control Panel IP 53 - ACOUSTIC ENCLOSURE Sheet Thickness 1.8 1.6, 1.8, 2, 1.2 Higher is better Thickness of Foam 40 - Density of Foam for sound insulation 40 - Noise level at 1 meter (dB) 75 - BATTERY Battery Type & Specification Low Maintenance free to IS: 14257 for high cranking performance - Battery capacity (Ah) - - No of batteries 1 - TEST REPORTS Availability of Type test report for Engine from Yes - 2/4 Central govt/NABL/ILAC accredited laboratory Test Report number and date(Engine) - - Name and address of laboratory(Engine) - - Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory Yes - Test Report number and date(Alternator) - - Name and address of laboratory(Alternator) - - DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes - WARRANTY INSTALLATION & COMMISSIONING Warranty 1 Installation & Commissioning With Installation With Installation, Without Installation Agreed to STC of the Product Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ram Krishna Bhatt 228001, MEJARFGANJ SULTANPUR 1 15
Potable water purification system Potable Water Purification System ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values EQUIPMENT TYPE & FEATURES Type Electrically Operated Reverse Osmosis based water purifier Electrically Operated Reverse Osmosis based water purifier, Gravity operated water purifier, Water Purifier electro- deionization Based Ultraviolet (UV) LAMP Yes Yes, No Ultra Voilet (UV) Lamp power consumption 1 - STANDARDS Conformity to Indian Standrad for System IS 14724 (latest) for water purification system with Ultraviolet disinfection - Number of float valves/sensors 1 INPUT PARAMETERS Input Water TDS 1000 1000, 2000, 3000, 4000, 5000 OUTPUT PARAMETERS Recovery at 27 degree Centigrade 25-35 25-35, 30-40, 90-100, 70-80, 50-60 Output Water of RO system Conforming to Indian Standard IS 10500(latest) - Output water capacity 50 10, 25, 50, 100, 250, 500, 750 1/3 (Litre/Hour): Arsenic and Floride removal capability true true, false Yes is better Misc, warranty etc Thin-film composite membrane Yes Yes, No, NA High Pressure Pump Yes - Raw water/Chemical Raw water/Chemical Cleaning PUMP Yes Yes, No Pre Filter Vessels: Yes Yes, No Micron Filter Yes Yes, No Membrane Housing Yes Yes, NA Auto cut Yes Yes, No No of candles (Nos) 3 Installation Type Wall mounted Table top, Wall mounted, Floor mounted, Floor mounted & enclosed Warranty period ( for free replacement of machine 2 2, 3, 1 Higher is better Warranty Period (for scope including free of cost candle and activated carbon onsite replacement twice a year) 2 2, 1 Higher is better Antiscalant- where silica is up to 100 ppm/where Mica is up to 100 ppm Yes Yes, NA Chloride & Flouride removal facility Yes with Pump Yes with Pump, Yes without pump, No Test Report Availability of type test report(Design Evalution Reports) as per IS:14724 and IS 10500 - - Test certificate No and date: - - Name and Address of laboratory which conducted Test: - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 2/3 1 Shimbhu Dayal Meena 326001, Government P G College Murti Choraha Jhalawar 2 15
ac static watthour meters-Energy meter Ac Static Watthour Meters-Energy Meter ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values FEATURES Number of phases single phase two wire single phase two wire, Three phase four wire Reference Voltage 240 240, 415 Basic Current Ib 10 5, 10, 20 Rated maximum current (I max) as (%) of lb 600 400, 600 Accuracy Class 1 1 GENERIC Features requirements conforming to the STC of the product yes yes Requirement of External Current Transformer No - CERTIFICATION ISI marked to IS 13779/99 with latest amendments Yes - CM/L No(Not a part of biddable parameter) 4819477 - ADDITIONAL FEATURES Additional features/functions, if any No Additional Features or Function, just a simple 10 - 60 Amp - 1/3 kWh Single Phase Meter with LCD Display TEST REPORT DETAILS Availability of Test Reports from Central Govt/NABL approved/ILAC acredited lab to prove conformity to the specification yes yes, No Test Report number and date (Not a part of biddable parameter) HPL/TR/PP/2015/09845, 17.11.2014 - Name and address of laboratory (Not a part of biddable parameter) HPL Testing Laboratory - New Delhi, India - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuldeep Singh N 131305, BHAGAT PHOOL SINGH MAHILA VISHWAVIDYALAYA, KHANPUR KALAN 20 15
biometric identification equipment Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 2 Year (s) Biometric Identification Equipment ( 24 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type Fingerprint Scanner Device for use with Desktop, Laptop, Tablet, POS Device etc. Fingerprint Scanner Device for use with Desktop, POS Device etc., Iris Authentication Device for use with Desktop, POS Device etc. Certification for Device and extractor software/SDK STQC Certified - API/SDK Windows 7 and above (including Windows based Mobile Phone) Windows 7 and above (including Windows based Mobile Phone), Android 4.0 and Above, Linux Integrated USB 2.0 and above Connector Yes - Connector Cable to connect the Device to Micro USB & Standard USB Yes - 1/4 UIDAI Certified Registered Device (Copy of the certificate to be furnished when demanded by buyer) Yes - Conformity to the "Terms and Conditions of UIDAI Certified Registered Device" Yes - Warranty (Years) 1 1, 2, 3, 4 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Gumli Ngomdir 791112, Room No.107, Digital Cell, Block No.1, First Floor A.P.Civil Secretariat, Itanagar 24 15
Line Intractive UPS with AVR Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 1 Year (s) Line Intractive UPS With AVR ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 0.65/168 0.65/168 Technology MOSFET-PWM MOSFET-PWM, IGBT- PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz Degree of protection IP 20 IP-21, IP 20 Inverter Efficiency (%) >/= 70% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year 1 year Warranty for Line Interactive UPS 2 Years 2 Years Installation and commissioning instructions Yes - CONSTRUCTIONAL Type of enclosure ABS - 1/4 AC out put for printer (not through inverter) Yes Yes, No Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 2 Three pin, 3 Three pin, Hard wiring, Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - 2/4 Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes - Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date - - Name Of Lab - - Address of Lab - - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajnish Chandra Srivastava 335001, GOVERNMENT P.G COLLEGE, HINDUMALKOT ROAD, SRIGNGANAGAR 15 15
Public place seating chair Experience with Gov. Required 2 Year (s) Public Place Seating Chair ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of Seating Integrated Seat and Backrest - Style with arm and backrest with arm and backrest, with arm and without backrest, without arm and with backrest, without arm and backrest Seating Capacity (Nos) 3 2, 3, 4, 5 Number of arms (Nos) 2 - Delivery status Assembled - Seat Cushion WITHOUT CUSHION - Backrest Cushion WITHOUT CUSHION - MATERIAL Material of Main Frame SS 202 mild steel, M S ERW tube, SS 202, SS 304 Material of Seat and Backrest SS 202 Mild Steel, PU Foam reinforced with 2 mm M S sheet inserts, SS 304, MS RECTANGULAR SECTION PIPE, Perforated MS sheet 1/4 covered with 40 mm cushion cover. Material of Arms SS 202 armrest are made up of powder coated high pressure aluminium dye cast, cold rolled steel, MS ERW TUBE, MS RECTANGULAR SECTION PIPE Material of Legs SS 202 cold rolled steel, POWDER COATED HIGH PRESSURE ALUMINIUM DYE CAST LEGS, MS round pipe - 1.6 mm thick Material of Side Bar Bracket made up of chrome plated solid steel - Thickness of material of Main Frame in mm 1.8 - Thickness of material of Arms in mm 2.0 - Type of bolts M8 bolts - Thickness of PU Foam for Seat and Backrest ±2(mm) N.A - Density of PU Foam for Seat and Backrest ±2(Kg/Cubic Metre) N.A - Covering Material for Seat and Backrest fabric tapestry - DIMENSION Overall Length in mm (±10 mm) 1800 As per GeM Catalogue. Overall Depth in mm ( ±5 mm) 640 As per GeM Catalogue. Overall Height in mm (±5 mm) 760 As per GeM Catalogue. Seat Height from Floor in mm (±5 mm) 500 mm - Thickness of material of Seat and Backrest (mm) 1.6 mm - CERTIFICATION Conforming to International Standard for Public YES YES, NO 2/4 Seating (*BIFMA X 5 dot 4 or equvalent) COLOUR & FINISH Colour of Covering Material white - All M S Strucure Finish Powder Coated - Colour of Paint silver - All steel component to be epoxy powder coated 60 micron thick - WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 2 1, 2, 5 MISC Seat and Backrest are Perforated false - Adjuster for legs false - Arms Chrome Plated false - Legs Chrome Plated false - Cushion on Arms false - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lalita Jain 325205, Govt. Girls College Baran Baran Rajasthan 4 15
Chest Press - Outdoor Gym Equipments Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Chest Press - Outdoor Gym Equipments ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Chest Press Double Chest Press Single, Chest Press Double SIZE Length 1070 - Width 699 - Height 2067 - CAPACITY Maximum User Weight ( Kg ) 110 100, 110, 120 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1239 ( Part 1 )- 2004, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true true, false Main Central Pipe 80mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Central Pipe, Class as per IS 1239 Heavy Medium, Heavy, Not applicable for pipe as per IS 1161 1/5 Designation of Main Central Pipe ( as per IS 1161 ) 80 MM NOMINAL BORE G.I. PIPE - Handle Frame 32mm Nominal bore G.I. pipe 32mm Nominal bore G.I. pipe, 40mm Nominal bore G.I. pipe Handle Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Handle Frame Pipe ( as per IS 1161 ) 25 MM NOMINAL BORE G.I. PIPE - Seat Frame 32mm Nominal Bore G.I. Pipe 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe Seat Frame Pipe, Class as per IS 1239 Medium Medium, Not applicable for pipe as per IS 1161 Designation of Seat Frame Pipe ( as per IS 1161 ) NA - Connecting Links 25mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 10mm thick MS plates, 12mm thick MS plates Connecting Links Pipe, Not applicable for M.S. Plates and Pipes as per IS 1161 Designation of connecting link Pipe ( as per IS 1161 ) NA - Foot Rest Pipe 25mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe Foot Rest Pipe, Not applicable for pipe as per IS 1161 Designation of Foot Rest Pipe ( as per IS 1161 ) NA - MS Foundation Plate Thickness 10 10, 12 Foundation Pipes with anchoring 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, 2/5 supported with M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 80mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Not applicable for pipe as per IS 1161 Designation of Foundation Pipe ( as per IS 1161 ) NA - Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Seat and Back Rest 3mm thick, HDPE with uniform bending radius to avoid sharp edges 2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges, 3mm thick, HDPE with uniform bending radius to avoid sharp edges, 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges, 2.5mm thick, M.S. Perforated with uniform bending radius to avoid sharp edges, LLDPE with uniform bending radius to avoid sharp edges Hand Grips Nylon - Nuts and Bolts for Assembly G.I. - Movement must be supplied with bearings Yes - Bearings Tapered Roller Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Closing Caps of open ends of the pipes, bearings, bushes and base G I Caps - Thickness of closing caps ( min ) 2 - All Plastic Components U V stabilised, weather - 3/5 resistance COLOUR Colour As per buyer's requirements - Paint/Finish Powder Coated, UV resistant - Paint Coating Thickness ( min ) 80 - OTHER REQUIREMENTS Ergonomic Design Yes - Moving Scope should be Limited Yes - There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free from entrapments and sharp edges Yes - Installation Instructions must be provided Yes - Installation Included Included, Not Included Safety and quality Requirements European Standard EN 16630: 2015 latest - Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) As per European Standard EN 16630 As per European Standard EN 16630, No Registration No and Validity of Registration NA - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 2 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajnish Chandra Srivastava 335001, GOVERNMENT P.G COLLEGE, HINDUMALKOT 1 15 4/5 ROAD, SRIGNGANAGAR
transilluminators uv Experience with Gov. Required 10 Year (s) Transilluminators Uv ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped UV Wavelength (nm) (nm) 312 - Type of illuminator Benchtop Type Benchtop Type, Hand held Intensity control - High/Medium/Low Yes - Cooling system by fan air cooling - Warranty (years) 3 - Size of Filter screen(Length xWidth) in mmxmm 15x15 - List of accessories to be supplied Yes - Dimensions of Equipment(LxWxH), 15x10x5 - Input Voltage, V (V) 220 - Selection of Intensity Single Intensity Single Intensity, Variable Intensity Min. Detection (ng) 10 - Weight of equipment, kg (kg) 2.5 - 1/3 UV safety screen Yes - No. of UV Tubes (Nos) 4 - Application Range To view DNA/RNA migration on the the agarose gel in microbiology laboratory - Wavelength type Single Single, Dual, Multiple UV Tube wattage (W) 120 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pratima Srivastav 324001, JDB govt girls college, Nayapura Kota 2 15
pH Meter Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) PH Meter ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values CONFIGURATION Type Microprocessor Based Microprocessor Based, Microcontroller Based Display LED/LCD/Touch Screen, 3 digits - Calibration up to 3 points with auto buffer - pH Range (pH) 0.00 to 14.00 - Accuracy (pH) +- 0.05 +- 0.05 Corrosion Resistant Yes - Power Requirements 230 V +- 10, 50 Hz AC - Modes pH mV- C - Parallel temperature indication Yes - Temperature Compensation Type Automatic Automatic, Manual Temperature Accuracy (Degree C) +- 0.3 +- 0.3 Temperature Compensation Range (Degree C) 0 to 100 - 1/3 Resolution (pH) 0.01 - Operating Humidity: RH in (%) 60 - Operating Temperature (Degree C) 20 - Warranty Warranty (Year) 3 3 Storage pocket for pH electrode Yes - Ingress Protection, Water Tight NA - Impact Resistant Yes - System to be supplied with Measuring electrode combined & glass calomel, temperature probe, Electrode Stand, calibration buffer and maintenance kit, operation manual, power cable and plug Yes - CERTIFICATIONS Availability Of UL/CE Certification As Per EN 61010-1:2010 Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use General Requirements NA - Test Reports For EMC/EMI As Per EN 61326-1:2013 Electrical Equipment For Measurement, Control And Laboratory Use EMC Requirements General Requirements (Test Reports Are To Be Furnished When Demanded By Buyer) NA - Availability Of Test Reports From Central Govt/NABL Approved ILAC Acredited Lab To Prove Conformity To The Specification (Test Reports Are To Be Furnished When Demanded By Buyer) false - Test Report Number NA - 2/3 and Date Name and address of the Lab NA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajnish Chandra Srivastava 335001, GOVERNMENT P.G COLLEGE, HINDUMALKOT ROAD, SRIGNGANAGAR 2 15
patient care beds for general use Patient Care Beds For General Use ( 150 ) Technical Specifications Specification Specification Name Values Allowed Values DIMENSIONS OF MATTRESS PLATFORM & FRAME Length of mattress platform & Overall length of bed >= 2150 mm & <= 2200 mm >= 2050 mm & <=2100 mm, >= 2150 mm & <= 2200 mm Width of mattress platform >950 mm to 1000 mm >950 mm to 1000 mm Material of mattress platform surface CRCA Sheet CRCA Sheet Height of mattress platform 650 - Mattress platform surface thickness 1.2 mm and above - Type of mattress platform Perforated Perforated BED Overall length of Bed(in mm): 2200 - FRAME section, dimensions, thickness and material MS ERW rectangular tube with 50 mmx30 mm or more, gauge 1.2 mm or more. - Frame width (in mm) 1000 - Leg Shoe material RUBBER - HEAD AND LEG BOARD Height of Head board measured from 400 - 1/3 mattress platform Material of Leg board and head board Plastic Plastic Height of Leg board 400 - Pipe diameter of Head and Leg Boards 30 mm or more - Thickness of pipe of Head and Leg board 1.2 mm or more - MISC Maximum Load Capacity must be >= 150 Kg Yes - Painting Powder coated Powder coated Colour of Bed white - Provision of I.V. poles Holder Yes - Provision of Mosquito net pole Holder No - Other details Drawing available on Web. false - If Yes, Drawing No. NA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ram Krishna Bhatt 228001, MEJARFGANJ SULTANPUR 150 30
reciprocal shakers- mechanical shaker machine with timer Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Reciprocal Shakers- Mechanical Shaker Machine With Timer ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values PRODUCT CONFIGURATION Purpose Kahn racks, bottle or conical flasks of different sizes cab be shaken by adjusting the compartments provided on the shaking rack - Shaking time control. Automatic digital ON/OFF timer . - Speed measurement. Digital OPM/speed meter. - Proximity switch. yes - Platform Width 30 - Platform Length 30 - Platform Height 20 - Shaking Reciprocating type . - Material: mild steel sheet duly power coated and top surface covered with non slip mat yes - 1/3 Heavy duty electric motor for continuous rating yes - Power Requirements 230 V 10, 50 Hz AC. - Power consumption 25 - Speed range. Variable from 70 to 300 oscillations per minute. - MAXIMUM Shaking Load (in Kilogram) permissible: 4 - Suitable for Operating temperature and RH 0 to 50 degree C, 0 to 90% Relative Humidity - CERTIFICATION Availability of Test Reports (TO BE FURNISHED BY SELLER TO BUYER ON DEMAND) of the product from Central Govt/NABL accredited Lab showing compliance to the specification true - Test Report details: Number, Date of issue, Name and address of issuing Laboratory New Delhi - FEATURES * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajnish Chandra Srivastava 335001, GOVERNMENT P.G COLLEGE, HINDUMALKOT ROAD, SRIGNGANAGAR 1 15
Professional Large Format Display Experience with Gov. Required 10 Year (s) Professional Large Format Display ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Technology LED Backlit LED Backlit Screen Size (Diagonal) Minimum (cm) 175 As per GeM Catalogue. (or higher) Screen Type Touch Touch, Non Touch Panel Technology Vertical Alignment (VA) - Orientation Landscape - Native Resolution (Pixels) 1920 x 1080 (Full HD) 1920 x 1080 (Full HD), 3840 x 2160 (UHD) Aspect Ratio 16:9 16:9, 32:9, 58:9 Brightness (Nits) Minimum 350 300, 350, 400, 450, 500, 600, 700, 1000, 1500 (or higher) Native Contrast Ratio (Minimum) 4000:1 - Viewing Angle (Horizontal:Vertical) 178:178 - Response Time (milli seconds) 4 - Bezel width (mm) 60 - 1/4 Number of Speakers 2 - Arrangement of Speakers Inbuilt - Wattage of Speaker (with maximum 10% THD) (Watt) 10 - Output Port for audio output if internal speakers are not there Available - VGA Port Available - HDMI Port Available - DVI-D Port Available - Display Port Not Available - USB Port Available - RS 232C Port Available - RJ 45 Available - In built Sinage Software Not Available - Power Consumption in Operating Mode (Maximum) (Watt) 270 - Power Consumption in Sleep Mode (Maximum) (Watt) 20 - Duty Cycle 24 x 7 24 x 7, 16 x 7 Mounting arrangement VESA(4 POINTS) - BIS Registration under CRS of Meity Yes - If Yes, BIS Registration number - - ROHS Compliance Yes - Power Supply 230 V AC, 50 Hz - Operating Temperature Range (Degree C) 5-35 - Operating Humidity (%RH) 20% - 80% PH - Dimensions (L X B) (cm x cm) - - Weight (Kg) - - Accessories to be supplied : AC Power cord, remote control, user manual, wall mount bracket, necessary cables and Yes - 2/4 connectors On Site OEM Warranty (Year) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pratima Srivastav 324001, JDB govt girls college, Nayapura Kota 1 15