Loading
Loading…
Loading…
2,847 results • Latest
hopper or tipper Hopper Or Tipper ( 28 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/6 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 Speed, Max (Km/Hr) 60 - Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - 2/6 ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 85 Tipper Container cap acity/Volume(cubic metres) 1.8 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 12 Tipper body Pivot length (mm) 0 - Tipper body Length (mm) 2240 - Tipper Body Height (mm) 735 - Overall Height of Tipper from Ground (mm) 1518 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System false - Hydarulic System true - 3/6 Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 1012 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/6 1 Nepram Gitkumar Singh 795001, Directorate of MAHUD, PDA Complex, North AOC, Imphal 28 15
Portable Fire Extinguishers BS EN Standard Based Portable Fire Extinguishers BS EN Standard Based ( 12 ) Technical Specifications Specification Specification Name Values Allowed Values Genric Conformity to Standard "EN 3-7 + A1: 2007 & EN 3-8;2006 with latest amdnt. " "EN 3-7 + A1: 2007 & EN 3-8;2006 with latest amdnt. " Type Stored Pressure Stored Pressure, Gas Cartridge Type Constructional Extinguishing Media Powder Based Water Based, Foam Based, Wet Chemical Based, Powder Based, Carbon Dioxide Based, Clean Agents, Halon Type Extinguishers Foam Based Extinguishing Media NA - Powder Based Extinguishing Media ABC Powder - Clean Agents Based Extinguishing Media NA - Halon Based Extinguishing Media ( as per European Council regulation 2037/2000 concerning use of halons) ( If not applicable write NA) NA - 1/4 Water Based Extinguishing Media ( If not applicable write NA) NA - Wet Chemical Based Extinguishing Media ( If not applicable write NA) NA - CO2 Based Extinguishing Media ( If not applicable write NA) NA - Nominal Permitted Charge for Powder Based Fire Extinguisher (kg) 6 1, 2, 3, 4, 6, 9, 12, NA Nominal Permitted Charge for Water Based, Wet Chemical Fire Extinguisher (Ltrs) NA 2, NA Nominal Permitted Charge for C02 Based Fire Extinguisher (kg) NA 2, 5, NA Nominal Permitted Charge for Halon Based Fire Extinguisher (kg) NA 1, NA Nominal Permitted Charge for clean Agents Based Fire Extinguisher (kg) NA 1, NA Weight of Filled Portable Fire Extinghuisher (kg) 9.4 - Rechargable Yes - Fire Extinguisher Suitable for Class -C Fire true - Fire Extinguisher Suitable for Class -D Fire true - Fire Extinguisher Suitable for electrical Fire true - Cylinder/Vessel Material HDPE with Aramid Winding ( Kevlar ) Non- Corrosive Type HDPE with Aramid Winding ( Kevlar ) Non- Corrosive Type, Stainless 2/4 Steel, Mild Steel, Aluminium Alloy Warranty for the Complete Product 5 1, 10 Performance Expellant Medium N2 Based CO2 Based, N2 Based, Helium Based, Air Based, Argon Based Suitable for Class -A fire ratings as per EN 3-7 5A - Class -B Fire Rating for (Powder Based, Foam Based CO2 based Fire Extinguisher 34B - Fire Rating for Class -F NA - Operating Temperature ( -30° C≤ N >=60° C ) -20° C to + 60° C - Service Pressure 15 - Burst Pressure 150 - Minimum Discharge Time (seconds) required as per EN Standard 15 - Actual Discharge Time in seconds 13 - Certification Shelf Life (Life Cycle) of the Fire Extinguisher 5 - Marine Equipment Directive(MED) Approved false - CE Certification from EU Notified Body Yes - CE Identification Number of the Notified Body (Must Declare) 2343 - Availability of Test Report from Central Govt./NABL/ILAC acredited lab to prove confirmity to specification Yes - Test Report No - - Test Report Date - - Name of the Lab - - Address of the Lab - - * Bold specifications are the golden parameters. 3/4 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sunita Yadav 303103, B.BD. GOVT. COLLEGE, VILL.& POST- CHIMANPURA TEH- SHAHPURA DISTT-JAIPUR 12 15
chairs-office Experience with Gov. Required 7 Year (s) Chairs-office ( 60 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest true - Chair Type With Arms With Arms, Without Arms Type of Seat and Backrest Made of Polythene cane Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type 4 Legs Cantilever, 4 Legs Castors With With, Without MATERIAL Type of Wood used in Polythene cane Chair solid wood solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover leatherite knitted with cane, leather foam, plastic 1/4 net, leather, leatherite, polyster, N.A Thickness of Plywood used in Backrest IN MM (±1 mm) 20 mm 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material MS MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 32 Kg/Cub.M - Material of Fabric of Seat Cover black leatherite black leatherite, knitted with cane, fabric, polyurathane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 32 Kg/Cub.M - Thickness of Plywood used in Seat ±1(mm) 18 mm 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 220 Gram per Sq Meter 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material CRCA pipe As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 25 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 15 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type fiber - DIMENSION Size of Material (mm) 14 SWG 25 mm round pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe 2/4 Chair Height ±15(mm) 700 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 350 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 350 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 400 400, 430, 460, 480, 500, 380 Backrest Width ±10(mm) 350 mm 350 mm, 480 mm Backrest Height ±10(mm) 300 mm As per GeM Catalogue. Arm Length ±5(mm) 200 mm 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) 25 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black - Paint Type chrome chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint black - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 YES - Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered YES YES, NO 3/4 product is ISO 14001:2015 certified OEM of offered product is ISO 18001:2007 certified YES YES, NO WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pratima Srivastav 324001, JDB govt girls college, Nayapura Kota 60 15
Potable water purification system Potable Water Purification System ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values EQUIPMENT TYPE & FEATURES Type Electrically Operated Reverse Osmosis based water purifier Electrically Operated Reverse Osmosis based water purifier, Gravity operated water purifier Ultraviolet (UV) LAMP No Yes, No Ultra Voilet (UV) Lamp power consumption 11 - STANDARDS Conformity to Indian Standrad for System IS 14724 (latest) for water purification system with Ultraviolet disinfection - Number of float valves/sensors 1 INPUT PARAMETERS Input Water TDS 1000 1000, 2000, 3000, 4000, 5000 OUTPUT PARAMETERS Recovery at 27 degree Centigrade 25-35 25-35, 30-40, 90-100, 70- 80 Output Water of RO system Conforming to Indian Standard IS 10500(latest) - Output water capacity (Litre/Hour): 50 10, 25, 50, 100, 250, 500 1/3 Arsenic and Floride removal capability false Misc, warranty etc Thin-film composite membrane Yes Yes, No High Pressure Pump Yes - Raw water/Chemical Raw water/Chemical Cleaning PUMP Yes Yes, No Pre Filter Vessels: Yes Yes, No Micron Filter Yes Yes, No Membrane Housing Yes Yes, No Auto cut Yes Yes, No No of candles (Nos) 3 Installation Type Wall mounted Table top, Wall mounted, Floor mounted Warranty period ( for free replacement of machine 2 2, 3, 1 Warranty Period (for scope including free of cost candle and activated carbon onsite replacement twice a year) 2 2, 1 Antiscalant- where silica is up to 100 ppm/where Mica is up to 100 ppm No Yes, No Chloride & Flouride removal facility Yes with Pump Yes with Pump, Yes without pump, No Test Report Availability of type test report(Design Evalution Reports) as per IS:14724 and IS 10500 - - Test certificate No and date: - - Name and Address of laboratory which conducted Test: - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sunita Yadav 303103, B.BD. GOVT. COLLEGE, VILL.& POST- 1 15 2/3 CHIMANPURA TEH- SHAHPURA DISTT-JAIPUR
Inverter with sine wave output Inverter With Sine Wave Output ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Inverter Governing specification Generally conforming to IS:13314 - Rating in KVA & Min. VAH Capacity of Battery 3 KVA/12960 VAH 0.8 KVA/3456 VAH, 1 KVA/4320 VAH, 1.5 KVA/6480 VAH, 2 KVA/8640 VAH, 3 KVA/12960 VAH, 5 KVA/21600 VAH, 7.5 KVA/32400 VAH, 10 KVA/43200 VAH Technology IGBT-PWM MOSFET-PWM, IGBT- PWM Energy Star Rating 4 Star 3 Star, 4 Star, 5 Star Trolley with trolley with trolley, without trolley Type of Battery Tubular battery confirming to IS:13369 Tubular battery confirming to IS:13369, VRLA battery confirming to JISC:8702(Pt.I, II&III) Backup time (Minutes) Minimum 180 Minutes - CONSTRUCTIONAL Thickness of sheet for trolley (in mm) minimum 1.2 - Trolley Material CRCA Steel - 1/3 Type of enclosure CRCA Steel - Thickness of sheet for enclosure ( in mm) minimum 1.2 - Inverter shall have by pass facility Yes - FUNCTIONAL Total Harmonic distortion </=5% - Input Single Phase sine wave(120 to 260 V) - Output Single Phase sine wave 240 V - Inverter Efficiency (%) >/=87% - Overload Time (in Minutes) >/=10 - Overload of rated load (in %) >/=10 - PROTECTION Battery cut-off voltage to protect from overdischarge (in Volt) >10.5 - Degree of protection IP 21 - METERING AND INDICATIONS The inverters shall be provided with output voltage and current meters conforming to IS 2419 : 1979 and of an accuracy class not inferior to 2.5 in accordance with IS 1248 : 1983 Yes - CERTIFICATIONS Availability of the Type Test Report from Central Govt. NABL/ILAC Accredited lab Yes - Climatic test report as per clause 7.10.1 of IS 13314 yes - Type Test Certificate No. 9033 - Name of Lab SHRI LAB - Type Test Certificate date 19/11/2017 - Address of Lab MUMBAI - Inverter shall have valid BIS CRS certifications for </= 10 KVA Yes - 2/3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Hari Ram Dhanetia 332713, SNKP College Modi Bag Colony, Neem Ka Thana, Rajasthan 332713 4 15
Video Recorder for CCTV System Video Recorder For CCTV System ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type of Recording Device DVR NVR, DVR, Hybrid Video Recorder (HVR) IP Camera Support true true, false PTZ Camera control Support true true, false Housing construction Alluminium Alluminium, Plastic Mounting Rack Mounted - Rack Mount configuration 4U - Capability of Recorder to Work with Other Makes of CCTV Cameras (ONVIF support) true - VIDEO Number of Video Input Channels 16 4, 8, 16, 32, 64, 128, 256 Number of Non-IP based Video input Channels for HVR 16 4, NA Number of IP based Video input Channels for HVR 16 4, NA Number of Video 4 1, 2, 4, 1/6 Output Channels 64 Recording Resolution Full HD (1920 x 1080) D1 (704 x 480), HD (1280 x 720), Full HD (1920 x 1080), 4K (3840 × 2160) Supported Compression Technique H.264, MPEG-4, MJPEG - Maximum Number of cameras to be viewed on a single display 16 - Total number of simultaneous local views 4 - Simultaneous Monitoring Connections for All Cameras (Users in Local Network for Client Connection) 16 - Recording Speed for all channels (fps) 25 - Minimum Through put (Mbps) 96 - Display Image Rate Real time per channel - AUDIO Audio Support true - Audio Input 4 - Audio Output 1 - Audio Compression G.726, G.711, AAC - Minimum Number of Simultaneous Channels for Two-way Audio Support 1 - SECURITY Type of Encryption HTTPS (SSL/TSL), HTTP (SSL/TSL), WPA - Multi Level User ID Password Yes - ALARM Alarm Support true - Alarm Input 8 - Alarm Output 8 - Pre/Post Alarm Buffer true - Pre-Alarm Recording 20 - Post-Alarm Recording 20 - Video Content Analytics (VCA) Motion Detection, Tampering - NETWORK PROTOCOLS Operating System Linux - 2/6 INTERFACE OPERATING SYSTEM Supported Supported Network Protocols UDP, SNMP, IGMP, DHCP, RTP, RSTP, HTTP, HTTPS, DNS, DDNS, RTSP, RTCP, NTP, UPnP, SMTP, FTP, IC MP, QoS, TCP/IP - Supported Interface Ethernet, HDMI, VGA, US B, RS 232 - Physical Layer of Ethernet 10/100/1000 Base TX - Number of Ethernet Ports 1 - Number of HDMI Ports 1 - Number of VGA Ports 1 - Number of CVBS Ports 0 - Number of USB Ports 2 - Number of Serial Ports 1 - Number of PoE Ports 0 - Supported SIM Slot NA - Number of SIM Slots 0 - FEATURES Video Loop Support true - Video Recorder supports recording on NAS Directly true - Remote Administration (Remote Configuration And Status Using Web Based Tool) true - System Update (Remote System Update Over Network Using Web Client) true - PC Client (PC Application Client With A Channel Recording Feature Support) true - Web Client (Viewer through HTTP system configuration) Yes - On Screen Display (In English) true - Drivers/Compatible Software (Wherever Applicable) Part Of Supply Yes - Recording schedule Yes - 3/6 support Bandwidth Control Yes - Camera Notification Spot (POP up Window) on Event, E-mail - Network transmission Speed Real time display @ D1 resolution - Other features, if any - - PLAYBACK/VIEW MANAGEMENT Search Date, Time, Event, Log, M otion, Bookmarks - Bookmarks Forward, Backward, adju stable playback speed, Full Screen, Next Camera, Previous Camera, Repeat - Page preview Multi Monitor Support, Video Window, Electronic Map on two separate monitors - Total Management Group add, Delete, Group management - Camera Add, Edit, Use Master account, Use Specific account - STORAGE Internal Hard Drive Interface SATA I - Number of Hard Disks (inclusive in the scope of supply) 2 - Storage Capacity of each Hard Disk (TB) 4 - Total Storage Capacity(TB) 8 - Internal Storage Expandable upto (TB) 8 - Number of Hard Disks supported 2 - Redundancy Option RAID 1 - POWER SUPPLY Power Input 230 ± 10%, 50Hz, 12 V DC, 24 V DC - Power Consumption 192 - Suitable Adapter to be Supplied to Make the Equipment Work on 230 V ± 10 %, 50 Hz Yes - 4/6 Redundant Power Supply true - OPERATING CONDITIONS Minimum Operating Temperature -20 - Maximum Operating Temperature 70 - Relative Humidity Non Condensing at 40 deg C 95 - WARRANTY/SERVICES Warranty 1 1, 3, 5 Time for Replacement of Defective Product During Warranty Period 24 12, 24, 36, 48, 72, 96 ENVIRONMENTAL CERTIFICATION Availability of facility and infrastructure for verification of all the parameters, features and capability with the Seller true - Conformity to Dry Heat test at Specified Maximum Operating Temperature for 16 hours as per IS :9000 latest true - Conformity to Damp heat at 40 degree C - 95% RH (cyclic test): two cycles of 16+8 hours as per IS: 9000 latest true - Conformity to Cold test at Specified Minimum Operating Temperature for 4 hours as per IS: 9000 latest true - BIS Registration for safety general requirements as per IS: 13252 (Part 1): latest true - Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification - - Test Report Number and Date - - 5/6 Name and Address of Test Lab - - Certification FCC, CE, UL - LIST OF ITEMS List of Items and Quantity of each item included in the offer - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Harikesh Meena 322241, Govt. Girls College, Karauli Near Circuit House Main Road, Karauli, Rajasthan 322241 2 15
e cart for garbage E Cart For Garbage ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of E Cart Fully Electric, Battery Operated Motor Driven for Carrying Bins Fully Electric, Battery Operated Motor Driven for Carrying Bins Model Number of E- Cart - - Colour of E Cart - - The E Cart Must Fabricated From Good Quality Steel properly Painted to avoid Rusting for more than 5 Years, YES YES Name and Grade of Steel from which E Cart Body Framed - - Kerb Weight of E- Cart (kg) 325 Garbage Carrying Capacity (kg) 400 Run Distance (for a Full Charge of Battery, to be tested with full load at maximum AIS-040 )) (km) 80 1/5 Number of Bins 2 Capacity of Individual Bins in litres (Ltrs) 450 Type of Chassis for E cart - - Ground Clearance as per IS : 9435 (mm) 200 Wheel Base (mm) 2175 Turning Radius (mm) 3000 Power Transmission from Motor Shaft to Wheels Other Mechanical Mechanisms Direct Mounting, Chain, Sprocket Type, Other Mechanical Mechanisms Please Specify the Mechanical Mechanism otherwise Put NA - - Type of Battery as per AIS-048 Lead Acid, EV Grade, Tubular Deep Discharge Lead Acid, Tubular Deep Discharge Capacity of the Battery approved by ICAT/ARAI (Ah) 100 Battery Voltage, Nominal (Volts) 48V 48V, 60 V Maximum Overall Dimensions of the Battery ( L x Wx H ) (mm3) - - Nominal Filled Weight of the Battery (kg) 112 Motor Controller ( Must Suitable for starting, accelerating, decelerating, driving, and stopping of E Cart - - Battery Charger 220/230 V Nominal Input Voltage, High Efficiency Type 220/230 V Nominal Input Voltage, High Efficiency Type Charging Current (A) 15 Type of Motor Brushless DC Motor Brushless DC Motor Motor Output Power, 48V/60V at Full Load (watt) 1050 Overall Efficiency of the E Cart ( to be tested at Full Load 85 2/5 with maximum speed as per Concerned AIS standards (%) Gradeability of E- cart, ( to be tested at full procedure as per AIS -003 Load (Degree) 80 Certification Vehicle Certification ICAT ARAI, VRDE, ICAT, OTHERS If Vehicle Certification from Others Agency, Name of the Agency otherwise put NA NA - Vehicle Certification Number and Date CALB0195 5/12/2016 - Constructional Seating Facility For Driver only For Driver only Length of E -cart as per Gazette Notification by Ministry of Road and Transport Oct, 2014 (meters) 2.765 Width of E -Cart as per Gazette Notification by Ministry of Road and Transport Oct, 2014 (meters) 0.96 Height of E -Cart as per Gazette Notification by Ministry of Road and Transport Oct, 2014 (meters) 1.735 Dimensions of the cabin Provided for Bins (mm x mm x mm) (mm3) 1275*900*820 - Size of Front Tyre (mm) - - Size of Rear Tyre - - Brake Type (Front) - - Brake Type ( Rear ) - - Suspension System (Front) - - Suspension System ( Rear ) - - Reverse Gear Yes Yes 3/5 Facility The Mounting of Batteries Yes Yes Vehicle lighting System Filament Type Filament Type, LCD Based, LED Based Instrument Panel Containing Speedometer and Battery Charging Indicator Yes Yes Glass Windshield with wiper motor as approved by ICAT/ARAI false true, false Battery Make as per AIS :048:2009 Okaya Okaya, Exide, ceil, Amaron, Others If others please specify the Name of Brand, Otherwise put NA (as per AIS048 2009) - - Equipped with Start and Stop Button, parking Lights, Back lights with Reverse Gear Facility Yes Yes Equipped with Fire Extinguisher true true, false Equipped with First Aid Box true true, false Yellow Color reflective tape on Front and Rear Side of the E Cart Yes Yes E Cart Integration, Yes Yes Performance Parameters Speed of the E- Rickshaw as per CMVR -2014 with latest amndmt (to be tested with Full Load ) (kmph) 25 Battery Warranty 1 1, 2, 3 No. Of Free Service 1 1, 3, 4, 5 Complaince of Centre of Gravity of E Cart as a Compulsory Norms for Safety Yes Yes Confirming to Applicable Yes Yes 4/5 Environmental Test Noise level must be Low during Operation Yes Yes * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pankaj Chandrawanshi 491441, municipal corporation rajandgaon imam chowk khairagarh road rajnandgaon 10 15
Drinking Water Cooler Drinking Water Cooler ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/ENERGY TYPE Storage - Cooling Capacity Litres/Hour 150 Liters/hour 40 Liters/hour, 60Liters/hour, 150 Liters/hour Storage Capacity 80 40, 80, 120, 150 Maximum Energy Consumption (Watt) 575 Watt for 40 ltr/hr cooling cap. - Power Factor 1 - CERTIFICATION Conformity to Indian standard IS: 1475 latest - ISI MARKED Yes - Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification false - Specification Specification Name Values Allowed Values GENERIC Eco-Friendly (Non CFC Refrigerant) Yes - 1/3 Water Tank sheet material and thickness Stainless Steel (Grade AISI 304), thickness > =0.8 mm - Water Tank cover and lid bottom Sheet material Eppoxy Painted Galvanized iron sheet - Water Tank cover and lid bottom Sheet Thickness 2 - Cooler Cabinet sheet material Stainless Steel (Grade AISI 304) - Cooler Cabinet sheet thickness 1 - Warranty on Machine 2 1, 2, 3 Higher is better Warranty on Compressor 2 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Firoz Akhtar 327801, TIMEDA ROAD KUSHALGARH DIST- BANSWARA PIN CODE-327801 2 15
classroom chairs Classroom Chairs ( 70 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Chair Type One Arm with fixed Writing pad on one side other side open One Arm with fixed Writing pad on one side other side open Type of Seat and Backrest Made of Polythene cane Made of Polythene cane Depth of Seat in mm (+/- 10 mm) 400 - Height of Seat in mm (+/- 10 mm) 440 - Width of Seat in mm (+/- 10 mm) 420 - Overall Chair Height in mm (+/- 10 mm) 750 - SEAT DETAILS Thickness of Cushion Used in Seat in mm (+/- 2 mm) No Cushion - Density of Cushion Used in Seat (Kg/Cubic Metre) No Cushion - Material of Fabric of Seat Cover No Cusihion No Cover - BACKREST DETAILS Density of Cusion Used in Backrest (Kg/Cubic Metre) No Cushion - 1/3 Thickness of Cushion in Backrest in mm (+/- 2 mm) No Cushion - Material of Fabric of Backrest Cover No ciushion no cover - Width of Backrest (mm) 350 - Height of Backrest (mm) 350 - SUPPORT/UNDER STRUCTURE Frame Material Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum Under Storage provided below the Seat NO - Material of under storage Nil - Length of Under Storage (mm) Nil - Width of Under Storage (mm) Nil - DEPTH of Under Storage (mm) Nil - WRITING PAD DETAILS Writing Pad Material PLASTIC MOULDED - Writing Pad Size (Length X Width in mm) 500 x 250 - MISC Colour of Fabric for Seat and Backrest No Fabric - Finishing of Structure Stove enameled Paint - WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand YES - Product having BIFMA certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chand Soni 303108, Near Bus Stand KOTPUTLI 70 15
Microscopes - Pathological and Research Experience with Gov. Required 1 Year (s) Microscopes - Pathological And Research ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values CONFORMITY/TYPE EYE PIECE - OBJECTIVE DETAILS Microscope Type pathological binocular non hinged type with built in light and with light intensity regulator pathological monocular hinged type without built in light and without light intensity regulator, pathological monocular non hinged type with built in light and with light intensity regulator, pathological binocular non hinged type with built in light and with light intensity regulator, research binocular non hinged type with built in light and with light intensity regulator, Research Trinocular - Non-Hinged type -with built-in light and with light intensity regulator Conformity to Indian Standard Research IS:5204 latest - ISI MARKED false true, false 1/4 Eye piece Type Compensating Huygenian, Compensating Binocular Eye pieces Confirming to the requirements of IS: 8275/1976 ( latest) yes - Eye Piece with magnification Set of Two For Binocular 10x monocular 5 x, monocular 10 x, monocular 15 x, set of two for binocular 5 x, Set of Two For Binocular 10x Objective Type achromatic achromatic, semiapochromatic, Apochromatic Objective Magnification 100X 10 x, 20 x, 40 x, 45 x, 90 x, 100X Numerical Apperture of Objective 1.25 0.25, 0.5, 0.65, 1.25 Type of lamp for Illumination led - GENERIC Plano Concave mirror attachment yes - Stage Ractangular - Size of Stage 150(W) X 134(D) X 16 (H) MM - Coarse and Fine Movement of stage yes - Co-axial focussing true - Micrometer Arrangement true - ACCESSORIES Extra eyepieces (inclusive in the scope of supply) NA 5 x, 10 x, 15 x, set of two 5 x, set of two 10 x, set of two 15 x, NA Carrying case (inclusive in the scope of supply) No - WARRANTY Warranty 1 1, 2, 3, 4, 5 Higher is better CERTIFICATION Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification false - Test Report No and Date NA - Name and Address of the Lab NA - 2/4 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dr.Sunil Pandurang Waghmare 444104, POST GRADUATE INSTITUTE OF VETERINARY AND ANIMAL SCIENCES, KRISHI NAGAR OPPOSITE DR PDKV CAMPUS, MURTIJAPUR ROAD, AKOLA MAHARASHTRA 1 15
camera for video conferencing system Camera For Video Conferencing System ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Camera for Video Conferencing System Camera without Codec - Type of Camera PTZ CAMERA FOR VIDEO CONFERENCING SYSTEM PTZ CAMERA FOR VIDEO CONFERENCING SYSTEM, Non PTZ CAMERA FOR VIDEO CONFERENCING SYSTEM Resolution Full HD(1920 x 1080 progressive signal) Full HD(1920 x 1080 progressive signal) Frame Rate (fps) 30 fps 30 fps, 60 fps Zoom Range Optical 3X 3X, 5X, 10X, 12X, 20X, 30 X, NA Zoom Range Digital 4X 2X, 3X, 4X, N A Field of View (Degree) HORIZ-85-30. VERTICAL-68.4-23.8 F 1.2 WIDE END F2.0 TELE END - Pan Range (Degree) 100 - Tilt Range (Degree) 20 - Type of Sensor CMOS - Camera Positioning Facility Preset Automatic Voice-activat ed, Movement-activated 1/3, Preset, Manual Input/Output Port HDMI - Camera Control (focusing, brightness, and white balance) Mannual - Minimum Illumination Required NA - SNR NA - PoE No - PoE+ No - BIS Registration under CRS of Meity NA - If yes, BIS Registration Number and its validity - - UL/CE certification Yes - UL/CE certificate Number (Furnished when demanded by buyer ) - - Operating temperature Range (Degree C) 0-40 - Operating humidity (%RH) 10-90 - Availability of test reports to prove conformity to the specifications (Furnished when demanded by buyer ) Yes - Installation and commissioning Yes - On SIte OEM Warranty (Year) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chand Soni 303108, Near Bus Stand KOTPUTLI 1 15
LED Luminaire (Recessed Luminaire) LED Luminaire (Recessed Luminaire) ( 77 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I - Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 - Rating of Recess type LED Luminaire/System Wattage/Rated Power 18W As per GeM Catalogue. Light Intensity(System Lumens) 80 Lm/Watt Yes - 1/5 for 3000 deg K, 90 Lm/Watt for 4000 deg K, 100 Lm/Watt for 6000 deg K Color temeprature (+/- 500 K) 4000 deg K - Type of fixture (in feet) 1x1 (for 3W to 16W) 1x1 (for 3W to 16W), 1x2 (3W to 16W), 1x1 (for 18W to 28W), 1x2 (18W to 28W), 1x4 (30W to 48W), 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 - Mounting type Recess type - Diffuser material Poly carbonate (UV stabilised) - The luminaire body must be corrosion resistant epoxy powder coated/anadozing Yes - All fastners must be of nickel/chrome plated Yes - Number of electronic control gear (power supplies) 1 - Light Source SMD LED Chip as per LM 80/IS16106 - Warranty for free replacement 2 Years - ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC - Rated voltage 230 V AC 50 Hz - AC Power Factor ≥ 0.90 - Driver Efficiency ≥85 - Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% (for above 20W) Yes - The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes - 2/5 OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, >/=120 Lm/Watt for 4000 deg K, >/=110 Lm/Watt for 3000 deg K) Yes - Working life for LED : (Minimum 50, 000 burning hours as per LM-80 report) Yes - Colour Rendering Index(CRI) ≥80 - Beam Angle ≥120 - Reflector type Diffuser - THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Junction temperature soldering temperature < 85 deg C - Operating temperature range -10 deg. C to +50 deg. C - Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M ohm - The luminaire shall be protected against surges and transients of >/=2.5 KV Yes - MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed - Each LED liminaire shall have the manufacturer’s name, Yes - 3/5 model number, serial number, date of manufacture (month- year), and lot number as identification mark inside each unit and the outside of each packaging box The operation characteristics such as rated voltage and rated power in watts shall be marked inside each LED luminaire unit Yes - REPORTS AND CERTIFICATIONS LED Make EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/SEOUL SAMSUNG/OSRAM REFOND/NICHIA CREE/LUMILEDS PHILIPS/SYSKA LUMENMAX - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government LAB NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 &TM21(Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the LED Chip being used in the luminaire) Yes - Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS Yes - 4/5 16107 (Part 2/Sec 1) : 2012 Seller has to furnish Type test report to the buyer on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sunil Kumar 134109, Haryana State Pollution Control Board, C-11, Sector-6, Panchkula 77 15
chairs-office Chairs-office ( 70 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest true - Chair Type With Arms With Arms Type of Seat and Backrest Made of Polythene cane Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type Cantilever Cantilever Castors Without With, Without MATERIAL Type of Wood used in Polythene cane Chair NOT APPLICABLE solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover N.A knitted with cane, leather foam, leather 1/5, leatherite, polyster, N.A Thickness of Plywood used in Backrest IN MM (±1 mm) N.A 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material CRCA ERW round pipe MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 35 Kg/Cub.M - Material of Fabric of Seat Cover fabric black leatherite, knitted with cane, fabric, polyur athane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) N.A - Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 220 Gram per Sq Meter 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material polypropelene As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) N.A 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 40 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type rubber - DIMENSION Size of Material (mm) 16 SWG 30 mm round pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe 2/5 Chair Height ±15(mm) 850 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 550 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 470 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 430 400, 430, 460, 480, 500, 3 80 Backrest Width ±10(mm) 450 mm 350 mm, 480 mm Backrest Height ±10(mm) 450 mm As per GeM Catalogue. Arm Length ±5(mm) 350 mm 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) 50 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black - Paint Type powder coated on MS chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint black - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NA - Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO 3/5 OEM of offered product is ISO 18001:2007 certified YES YES, NO WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chand Soni 303108, Near Bus Stand KOTPUTLI 70 15
Interactive Boards Interactive Boards ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values PERFORMANCE PARAMETERS Mode of operation Projector and whiteboard Mode both Projector mode, Projector and whiteboard Mode both Board Aspect Ratio 16:10 16:10, 5:4, 4:3, 16:9 Touch Technology infrared resistive, electromagnetic, anoto, infrared, capacitive, ultrasonic, Optical Touch interface Touch Sensitive and Pen Driven Both touch senstive, pen driven, Touch Sensitive and Pen Driven Both Source of power Supply Through USB Ports - Number of USB 2.0 ports (Nos) 1 - Number of USB 3.0 ports (Nos) 0 - Number of electronic pen or stylus to be supplied with the board (Nos) 3 - Operating system Comparability - - Details of software - - 1/4 provided Display Resolution in pixels 32775 32775 Number of touch points (Nos.) 6 - Response time in milliseconds 0.4 - Bluetooth connectivity true - Power consumption in Watt 0.5 - Wi-fi connectivity true - Provision for wall mounting yes - Operating Humidity (%) 80 - Operating Temperature Range in Degree celsius - - Warranty in years 1 1, 2, 3, 4, 5 DIMENSIONAL PARAMETERS Surface material of Boards ceramic Steel Surface Laminate Surafce, Painted Steel Surface, ceramic Steel Surface Board Diagonal Size in inch 88 Active area (Diagonal) of the board in Feet (Width x height) - - Active area (Diagonal )of the board in mm(Width x height) - - ADDITIONAL SUPPLIES USB Extender Hub 8 Meters true - All connecting Cables and accessories to be supplied along with the Board yes - Installation Kit to be supplied alongwith the Board Yes - Availability of Direct Printing Facility from Board true - Operating and Installation Manual Yes - Test Reports Availability of test reports from Central Govt/NABL/ILAC accredited Lab Yes Yes, No 2/4 covering all the parameters Test Report No - - Test Report date - - Name of Test lab - - Complete Address of the Test lab - - Copy of Test reports will be provided to buyer on Demand at the time of supplies (Applicable if availability of test report indicated as YES, otherwise put NA) Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuldeep Singh Gaur 312026, SHRI SANWALIYAJI GOVERNMENT COLLEGE MANDPHIYA 1 15
inverters solar inverter Inverters Solar Inverter ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating of inverter (KVA) 5.0 KVA 5.0 KVA ISI marked No Yes, No If ISI marked yes, CM/L No. must declare. If ISI mark No write NA NA - Nos. of phase single single, Three Inverter output wave form Pure sine wave Pure sine wave, Quasi sine wave Ingress protection rating of inverter IP 65 for outdoor use IP 65 for outdoor use, IP 23 for indoor use Built in protection for AC high/low voltage and frequency if connected to AC mains IP 65 for outdoor use IP 65 for outdoor use, IP 23 for indoor use Display Type LED LED, LCD Area required for installation of Solar panels with mounting structure (sq. mt) 20 - Material of mounting structure Galvanised steel Stainless steel, Galvanised steel, 1/5 Aluminium alloy CONSTRUCTIONAL Mode of operation Stand-alone - Switching device MOSFET IGBT, MOSFET Maximum power point tracking (MPPT) yes - Galvanic isolation between input DC and output AC yes - By-pass facility if connected to AC mains IP 65 for outdoor use - Display parameters like DC voltage (V) DC current (A) AC voltage(V) YES - Sequence of power drawing (1) SPV (2) AC MAINS (IF CONNECTED WITH AC POWER) (3) BATTERY BANK - Nos. of modules in an array (NOS.) 10 - Rating of individual PV module (Wp) 270 - Salt mist corrosion resistant material for body and frame of SPV module Galvanized steel Aluminium, Galvanized steel Provision for Solar generation meter yes - Provision for bidirectional meter (Net Meter) yes - Provision of anti rusting/non corrosive mounting structure yes - Sustainability of wind speed. (KM/Hr) 150 150, 200 Type of battery (KM/Hr) Tubular Gel VRLA, SMF, Tubular Gel Capacity of battery bank (VAH) 21600 - 3 stage battery charging (float, boost and equalize stage) for long life of the battery yes - Reverse polarity protection yes - Complete installation yes - 2/5 work to be done by supplier Gross weight of the inverter (kg) 21 - Reverse polarity protection for PV modules yes - FUNCTIONAL Inverter efficiency 85 - Total Harmonic distortion (%) 5 - Operating AC voltage range (Volts) 230 - Operating frequency range (Hz) 50 - Operating Temperature (degree cel) 40 - Operating relative humidity (%) 90 - Load power factor 0.5 - Output regulation at rated voltage Yes - Over load Protection 110% for 60 Seconds, 125% for 30 Seconds and 150% for 5 seconds yes - Efficiency of Solar panel (%) 70 - Battery backup time at rated load (Hour) 4 1, 2, 3, 4 Battery bank Voltage (Volt) 96 - CERTIFICATIONS Conformity of inverter to environmental testing conditions as per IEC 600688-2 (1, 14, 30) or equivalent BIS standard YES - 90% performance warranty for SPV (years) 10 - 80% performance warranty for SPV (years) 25 - TTC for PV module from any MNRE lab as per MNRE 2015-2016 yes - 3/5 OEM test report for indigenously produced PV module (s) yes - Availability of Type test report for inverter including environmental tests from Central government/NABL/ILAC accridiated laboratory to prove conformity to the specification yes - Test report number 1000071811 - Date of test report 1/6/2015 - Name and address of laboratory Luminous Power technology - Type test report to be furnished on buyers demand yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuldeep Singh Gaur 312026, SHRI SANWALIYAJI GOVERNMENT COLLEGE MANDPHIYA 1 15
Computer Table Computer Table ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of Computer Table Computer table with key board drawer and table top Computer table with key board drawer and table top, Only Printer Table, Computer cum Printer table with key board pullout tray and table top Construction of Computer/Printer Table Steel members duly welded and rigid fixed table top, with slideable key board tray, drawer, modesty panel, foot rest and also with another shelf at the bottom side for placing CPU and other peripherals - Top Extended by 50 mm on all sides over the steel frame - Edge of Top banded with 1.5 mm thick PVC tapes of some shade as that of tape - Placing of modesty panel covering full back side of frame end suitably welded with two side members of the from in - 1/4 such a way that it's top surface having 17 mm width, flushes with top surface two side members and joining front angle member Packing Gutta Packing - Mode of Supply of modular table Knocked Down To Be Assembled At Consignee Site By The Seller - MATERIAL Frame Material Size Hollow Rectangular Section Of Size 50 X 25 X 1.6 Mm Thick - Frame material of foot rest Hollow Rectangular Section Size 50 X 25 X 1.6 Mm Thick - Joining of Frame two side member of the frame identical in shape joined with welding at bottom with a footrest angularly welded - Welding of Modesty Panel A modesty panel of size 200 mm X 17 mm X 0.8 mm thick CRC sheet to be welded - Making of Frame To be rigid in construction - Welding at top and Back At The Top In Front Side Welded With An Angle Size 17 Mm X 17 Mm X 3 Mm And At The Back On The Top Side Of The Frame - Guides Thickness (for drawer) 2 mm thick minimum from mild steel sheet - Material of Table Top, Key board and drawer pre-laminated Particle boards (Wood Product) of grade II Type II of IS 12823 Latest - Bottom side of top should have balancing sheet of requisite thickness of same colour as top laminate - Thickness of Table Top etc 18 - Lock of Drawer false - Type of lock N.A - 2/4 Sliding of Key board provided with two telescopic channels with balls - Material of Modesty Panel CRC sheet conforming to IS:513/Latest - Welding of screws to make capable to adjustable level upto 10 mm in height four level screws, having smooth bottom flat surface of minimum 50 mm diameter, be welded under the bottom of two side members of frame - DIMENSION Size of Computer Table ±10 mm (LXBXH) 1000 Mm X 600 Mm X 750 Mm - Size of Printer Table ±10 mm (LXBXH) NA - Size of Computer Cum Printer Table ±10 mm (LXBXH) 1200 mm X 750 mm X 750 mm - Outside Drawer Size (L X B X H) ±5 mm NA - Size of key board tray ±5 mm N.A - Size of Modesty panel N.A - COLOUR & FINISH Phosphating treatment of MS parts after Pick as per IS:3618/Latest - Primer for coating on M S parts Zinc-chromate - Putty for filling conforming to IS:110/Latest - Paint exposed steel sections to be painted with black in colour with powder coating 40-50 micron thickness - Powder Coating conforming to IS:13871/Latest - Colour of Top peach - WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 (or higher) CERTIFICATION Test reports to be furnished to buyer on demand NO - * Bold specifications are the golden parameters. Consignees and Quantity 3/4 S.No. Consignee Address Quantity Delivery Days 1 Kuldeep Singh Gaur 312026, SHRI SANWALIYAJI GOVERNMENT COLLEGE MANDPHIYA 10 15
Air Conditioner Air Conditioner ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/GENERIC Type of Air conditioner Floor Standing Split AC Floor Standing Split AC Technology of AC Inverter (Variable Speed) Inverter (Variable Speed), Non- Inverter (Fixed Speed) Nominal cooling capacity in Ton (kcal/hr) 2.0 Ton/6000 kcal/hr 1.0 Ton/3000 kcal/hr, 1.5 Ton/4500 kcal/hr, 2.0 Ton/6000 kcal/hr, 2.5 Ton/7500 kcal/hr, 3.0 Ton/9000 kcal/hr Coil Material Copper Aluminium, Copper Eco-friendly refrigerant false Minimum length of copper pipe and suitable connecting electrical cable for installation and commissioning 5 metre - Packing LIst NA - Any other Features NA - CONFORMITY CERTIFICATION BEE Star Rating 3 1, 2, 3, 4, 5, NA Conformity to Indian IS 1391 latest - 1/3 Standard WARRANTY Warranty on Machine 1 1, 5 Warranty on Compressor 5 5, 6, 7, 8, 9, 10 INSTALLATION Installation and commissioning Without Installation and Commissioning With Installation and Commissioning, Without Installation and Commi ssioning, Installation and Commissioning at Extra Cost as offered by the seller seperately on GeM * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Chand Soni 303108, Near Bus Stand KOTPUTLI 3 15
Foolscap sheets Foolscap Sheets ( 300 ) Technical Specifications Specification Specification Name Values Allowed Values Type Description (size) of Paper LEGAL FOOLSCAP, LEGAL Dimension and Weight Dimension of the Paper (W X L) (mm X mm) 216 X 356 215 X 342, 216 X 356 GSM (GSM) 75 75, 80, 90 (or higher) Physical Characteristics Brightness (%) 92 Tensile Index MD (Nm/g) 60 - Tensile Index CD (Nm/g) 50 - Opacity (%) 95 - Tear Index (Avg) (Nm.m2/g) 6.5 - Smoothness for both sides (Bendtsen) (ml/min) 300 - Thickness (um) 110 - Moisture (%) 5.5 - Stiffness MD 4 - Stiffness CD 3 - 1/3 Surface Strength Dennison (Wax Pick) N>= 12A 12a - Test Method as per IS: 1060 Yes - Packing Number of Sheets per Ream (Nos) 500 Sheet - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Laxman Hanmanta Chalwadi 413001, Solapur Municipal Corporation, Computer Department, Dr.Babasaheb Ambedkar Chowk (Park Chowk) Solapur 300 15
Modular Table Modular Table ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Mode of Supply of modular table Knocked Down to be assembled at consignee site by the Seller Assembled Ready to Use, Knocked Down to be assembled at consignee site by the Seller, Knocked Down to be assembled at consignee site by consignee himself Storage Provided both side one side, both side, No Storage Number of storage unit four storage single storage, double storage, triple storage, four storage, No Storage DIMENSION Length of Table Top ±10(mm) 1800 900, 1200, 1500, 1800, 2000, 2100, 2400 Depth of Table Top±10(mm) 900 600, 650, 750, 900, 1100, 1200 Height of Table Top±10(mm) 750 700, 725, 775, 800 Width of the storage unit ±10(mm) 450 - Depth of storage unit±10(mm) 485 - 1/4 Height of smallest storage unit ±5(mm) 175 mm - Height of medium storage unit ±5(mm) 175 mm - Height of largest storage unit ±5(mm) 305 mm - MATERIAL Table Top material and thickness ±3mm 25mm thick Other wood As per GeM Catalogue. Gable end and modesty panel material and thickness 19mm thick Decorative Block Board BWP grade Conforming to IS 1659 - COLOUR & FINISH Table Top Finish Laminate In Colour With Swede Finish 0.6-0.8 Mm Thickness Of Type S, F Or P Having Index NO.3.2.3.Conforming To IS 2046/1995(Reaffirmed April 2010) With Having Balancing Laminate Of 0.5mm Thick On Other Side. - Table Top Shade Oxford Cherry - WARRANTY Warranty period in number of years 2 1, 2, 3, 4, 5 MISC Frame Type free standing - System of Paneling No panneling required - Table top long sides Shall Have Post Form Half Round Profile with corner edge bending - Table Top Plain Sides edge banded with PVC tape of 2mm thick of reputed make with the help of hot melt glue. - Table to fixed with gable End And Modesty Panel Using Mini Fix And Wooden Dowel By Using (Knock Down) System For Interconnecting - For Gap/wrap age Numbers Of Mini Fix Dowel Can Be Modified(One In 1000 Mm Length, Two In 1001 To 2000 Mm Length Three In Above 2000 Mm Length) Made Of 1.2 Mm Thick CRC Sheet duly - 2/4 galvanized/powder coated Number of buffers to be provided 4 numbers at the bottom - Foot rest provided true - Lock Provided true - Gable end and modesty panel plain side To be edge banded with PVC tape of 2mm thick of reputed make with the help of hot melt glue. - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuldeep Singh Gaur 312026, SHRI SANWALIYAJI GOVERNMENT COLLEGE MANDPHIYA 1 15
Human Resource Outsourcing Service
Online UPS
Notebook Computers-laptop
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Lexmark - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Cyam - Ink/Toner/Drum Model number 708C Cyan Return Toner Cartridge - Corresponding Part number/code 70C8HC0 - Printer Model number/numbers for which Cartridge is suitable CS310DN, CS410DN, CS 510DN - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 3000 - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 Rajiv Kumar 110009, DELHI TRANSPORT CORPORATION, MS-1 (Central Workshop-1), Banda Bahadur Marg DELHI-110009. 30 15
OEM Cartridge/Consumable OEM Cartridge/Consumable ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand Lexmark - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Magenta - Ink/Toner/Drum Model number 708C megenta Return Toner Cartridge - Corresponding Part number/code 70C8HM0 - Printer Model number/numbers for which Cartridge is suitable CS310DN, CS410DN, CS 510DN - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 3000 - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 Rajiv Kumar 110009, DELHI TRANSPORT CORPORATION, MS-1 (Central Workshop-1), Banda Bahadur Marg DELHI-110009. 30 15
Modular Work Stations/Modular Staff Office Packages Modular Work Stations/Modular Staff Office Packages ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values SELLING UNIT Selling unit Order Quantity is number of Pieces Clusters of specified number of seats. (Price given is for full cluster module and not per seat) Order Quantity is number of Pieces Clusters of specified number of seats. (Price given is for full cluster module and not per seat) GENERIC Type of system Desk band system Tile based system (shape fit tiles), Hybrid panel based system (combination of sliding & snap fit tiles), Desk band system Type/Shape of cluster Single Seater L Shape Cluster Single Seater L Shape Cluster, Single Seater Rectangular Cluster, Double Seater C shape Cluster with Curvilinear Top, Double Seater T shape Cluster with Curvilinear Top, Double Seater Rectangular shape Cluster with Side By Side sitting, Double Seater Rectangular shape Cluster with 1/6 Back to Back sitting, Four Seater H Shape Cluster with Curvilenear Top, Four Seater Plus Shape Cluster with Curvilenear Top, Four Seater Rectangular Cluster with Straight Line Side by Side Sitting, Four Seater Rectangular Cluster with 2 X 2 Opposite Sitting Wire Management for electric switch Mounted on bottom tile or back - Foot edge of table top Flat with PVC lipping - Plain edge banded with 2mm PVC tape - Construction of drawer unit Wooden front post form Flat metal front, Wooden front with PVC lipping, Wooden front post form, All wood pedestal, Full Metal, Wooden front with teak wood lipping Construction of pedestal Top supporting Top supporting, Free standing full height with castor, free standing low height with castor Type of pedestal two drawer and one filer - Locking system of pedestal Center locking - Work top support Gable end made of prelaminated particle board Gable end made of prelaminated particle board, M S leg, Commercial Block Board BWP grade, Decorative Block Board BWP grade, Commercial Block Board MR Grade, Decorative Block Board MR Grade Type of Drawer unit Fixed - MATERIAL Frame material for work station Powder coated CRCA hollow system As per GeM Catalogue. Material of table top Prelaminated particle board Prelaminated particle board, MDF board, E-1 grade green board, Commercial Block 2/6 Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Teak carved wood, Other wood Material of tiles for top laminate Fabric tackable-fabric upholstered metal tile with PE foam, fabric magnetic - fabric upholstered metal tile, white board made of decorative laminate with white glossy, high pressure laminate, laminate, glass writing board plus back painted sandwich glass tiles, fabric tackable plus fabric magnetic plus white board, fabric tackable plus fabric magnetic plus glass writing board, N.A Material of intermediate tiles Pre laminated board As per GeM Catalogue. Material of bottom tiles Material tile powder coated Material tile powder coated, prelaminated particle board tile, Commercial Block Board BWP grade tile, Decorative Block Board BWP grade tile, Commercial Block Board MR Grade tile, Decorative Block Board MR Grade tile, N.A Overhead Storage Provided No Overhead Storage - DIMENSION Length of table top (main frame) ±10 mm(main frame) 750 mm As per GeM Catalogue. Length of table top (Return Frame)± 10mm 900 mm 900 mm, 1050 mm, 1200 mm, 1350 mm, 1500 mm, 1650 mm, 1800 mm, NA FOR 3/6 RECTANGULAR, 915 mm, 1220 mm Depth of table top ± 10mm 600 mm 450 mm, 600 mm, 750 mm, 610 mm Height of table top ±10mm 750 mm - Thickness of table top ±2mm 25 mm - Overall height of work station partition ±10mm 900 mm As per GeM Catalogue. Thickness of side partition/panel ±2mm 35 mm As per GeM Catalogue. Thickness of main frame ±5 mm 35 mm As per GeM Catalogue. Size of drawer unit ( WidthXDepthXHeigh t) ±10mm 450 X 440 X 147 (mm) 390 X 440 X 147 (mm), 390 X 590 X 147 (mm), 450 X 440 X 147 (mm), 450 X 590 X 147 (mm), NO DRAWER UNIT, 390 x 440 x 160 (mm), 400 X 470 X 130 (mm) Size of file box (Widt hXDepthXHeight) ±10mm 450 X 440 X 296 (mm) 390 X 440 X 296 (mm), 390 X 590 X 296 (mm), 450 X 440 X 296 (mm), 450 X 590 X 296 (mm), NO FILE BOX, 390 x 440 x 260 (mm), 400 X 470 X 330 (mm) FINISH Powder coating thickness of frame 40 micron - CERTIFICATION Test reports to be furnished to buyer on demand YES - BIFMA level-3 YES - OEM of offered product is ISO 9001:2015 certified YES - OEM of offered product is ISO 14001:2015 certified YES - OEM of offered product is ISO 18001:2007 certified YES - Green guard certification YES - 4/6 WARRANTY Warranty period in number of years 2 1, 2, 3, 4, 5 INSTALATION COMMISSIONING INSTALLATION COMMISSIONING The price includes the cost of installation and commissioning of the entire unit at consignee site (excluding the cost of Civil Work which would be got done by the Consignee at his own cost as per design and layout plan provided by the seller). The price includes the cost of installation and commissioning of the entire unit at consignee site (excluding the cost of Civil Work which would be got done by the Consignee at his own cost as per design and layout plan provided by the seller). * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuldeep Singh Gaur 312026, SHRI SANWALIYAJI GOVERNMENT COLLEGE MANDPHIYA 1 15
iv sets transfusion and infusion equipments Average Turn Over of Last 3 Years 10 Lakh (s) Iv Sets Transfusion And Infusion Equipments ( 50000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Type of IV Set Non Vented Infusion Set for Single Use, Gravity Feed (Designation: Infusion Set 8536-4-IS-NV) Transfusion Set for Single Use (Designation : Transfusion Set IS 9824-3 TS), Vented Infusion Set for Single Use, Gravity Feed (Designation: Infusion Set 8536-4-IS-V), Non Vented Infusion Set for Single Use, Gravity Feed (Designation: Infusion Set 8536-4-IS- NV) STANDARDS Conformity to Indian Standard IS:12655(Part-4) Latest IS:12655(Part-4) Latest CONSTRUCTION Transfusion/Infusion set provided with Injection set true true Provision of Closure of Air Inlet with Vented Infusion Set No No Air Inlet Device with Air Filter Required false Luer Lock Fitting false 1/3 MARKING ISI Marked false CM/L No NA - CERTIFICATIONS I V Set comply with the provisions of Drugs and Cosmatic Act 1940 as amended till date Yes - GMP issued under revised Schedule -M of Drugs and Cosmetics Act 1940 as amended or WHO-GMP(For Manufacturers only) YES - Good Manufacturing Practices (GMP) Certificate No.and Date DRUG - Non Conviction Certificate issued by the concerned Drugs Control Authorities Licencing Authorities Yes - Non Conviction Certificate No. DRUG - REPORTS Submission of Test Reports on Form 39 or from Drug Controller Approved Laboratories which are also satisfying Central Govt./State Govt/NABL/IL AC accredited Lab covering all the Declared Parameters as per IS Specification at the time of supply Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Surendra Kumar Azad 492001, Dr. Bhim Rao Ambedkar Hospital, Jail Road, Raipur Chhattisgarh 50000 15
automatic line voltage corrector or step type auto transformer Automatic Line Voltage Corrector Or Step Type Auto Transformer ( 7 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped GENERIC Conforming to IS:8448 latest Yes - Rating in KVA 2.0 KVA 0.5 KVA, 1.0 KVA, 2.0 KVA, 3.0 KVA, 4.0 KVA, 5.0 KVA ISI Marked Yes Yes, No ISI Marked if Yes CM/L No. (If No write NA) NO - Type of winding Copper Copper, Aluminium Input Single Phase sine wave (160V-260V) Single Phase sine wave (160V-260V), single Phase Sine wave (120V-280v) Display Type of Meter Digital Volt Meter analog Volt Meter, Digital Volt Meter CONSTRUCTIONAL Mounting Type Floor mounting - Current rating of the Relay/contactors (Amp) Conforming to IS:8448 latest - Overall weight of ALVC (Kg) 5 KG - Provision of power Yes - 1/3 supply cord/terminal as applicable for input and output as per IS:8448 FUNCTIONAL Output Single Phase sine wave (210V-250V) - Overall efficiency of ALVC (%) >/= 95% - The product shall conform to the acceptance tests as per Cl. 12.1.1 of IS:8448 latest Yes - CERTIFICATIONS Availability of Type Test Report from Central Govt. NABL/ILAC Accredited lab to prove conformity to the Specification IS:8448 latest Yes - Type Test report No. VMS 001 - TTC report date 10/01/2018 - Name of Lab VMS LAB - Address of Lab SK ROAD CHENNAI - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shambhu Dayal Gupta 303103, Ganga Market Shahpura, Jaipur 7 15
paper printing white and creamwove Paper Printing White And Creamwove ( 3000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conformity to Indian Standard IS 1848:Latest for Paper Printing White and Creamwove Yes - ISI MARKED Yes - CM/L Number and Date 9433177 - Test Report Details Test Method as per IS: 1060 Yes - Availability of Test Report covering complete test parameters as per IS:1848 latest from any ILAC/NABL accredited/Central Gov. LAB Yes - Test certificate Number 100/01-1617/6835 - Test Report Date 05 JAN 2017 - Name and Address of the Lab where test Conducted. INDIAN INSTITITE OF PACKAGING - Type Type of Paper Printing CreamWove White, CreamWove, Blue, Yellow, Magenta 1/3 Size GSM (gsm) 60 60, 65, 70, 75, 80, 90 General Properties Material used (if Eco mark) as per cl.4.8.2 of IS 1848 : latest YES - Water Marking Security fibre on Paper Printing White and Creamwove Without With, Without Water Marking Security fibre on Paper Printing White and Creamwove with Manufacturers Mark - Physical Characteristics Brightness (%) for White and Cream Wove Paper 72 Tensile Index MD (Nm/g) 25 Tensile Index CD (Nm/g) 17 Opacity (%) 80 Tear Index MD (Nm.m2/g) 5 Tear Index CD (Nm.m2/g) 4 Cobb Test (g/m2) 15 Weight and Packing Packing as per IS 6211 latest Yes - Packing IN REEL - Net Weight (without weight of core pipe and plugs, wrapping packing paper) 145 Weight of paper (in Kilograms) on Reel/Sheets(as Accounting Unit) 150 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajiv Kumar 110009, DELHI TRANSPORT CORPORATION, MS-1 (Central Workshop-1), Banda Bahadur Marg DELHI-110009. 3000 15 2/3
Class Room Desking and Seating Class Room Desking And Seating ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK Desking Configuration THREE SEATER SINGLE SEATER, TWO SEATER, THREE SEATER, FOUR SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 1500 As per GeM Catalogue. DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 25 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side As per GeM Catalogue. Material of Support Structure or Side Pannel Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm As per GeM Catalogue. 1/3 minimum Height of Desk Top in mm (±5 mm) 750 As per GeM Catalogue. Width of Desk Top in mm (± 5 mm) 450 As per GeM Catalogue. SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side As per GeM Catalogue. Material of Support Structure Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum As per GeM Catalogue. Material of Seat Cushion WITHOUT CUSHION 40 mm thick PU foam of density 40 gram per cubic cm, WITHOUT CUSHION, ONLY DESK NO SEATING Width of Seating in mm (±10 mm) 300 As per GeM Catalogue. Height of Seat in mm (±10 mm) 460 As per GeM Catalogue. Width of backrest if provided in mm (± 5 mm) No Backrest As per GeM Catalogue. Back Support for Seating of Same materail as Seating back support not provided back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) Can be configured as per buyer's choice within offered technical details - Colour of finish gray - Desk top finishing Two long sides shall have post form half round profile and other two sides edge banded with 2 mm thick PVC tape with the help of hot melt glue - Distance between Tabletop edge and Seat 300 - 2/3 edge in mm (+/- 5 mm) WARRANTY Warranty period in number of years 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shailendra Khare 497001, Government Polytechnic Surajpur C G (Running in Government Polytechnic Ambikapur C G) 10 15