Organization Name Tender Results

Projector Screen Projector Screen ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specifications Type Motorised Map Type, Spring action pull down, Motorised Supported Display Technology 1080p, 3D and 4K Technology 1080, 3D, 4K Technology, 1080p and 3D, 1080p, 3D and 4K Technology Mounting Type Wall Mount Wall Mount, Stand Mount Aspect Ratio 4:3 - Display Fabric Material Matte White - Length x Width of Projector Screen (Inch x inch) 96X120 - Gain 1.6 - Life time lubricated motor for smooth & silent functioning of the screen Yes - Remote Yes - If Yes, Type Of Remote Wireless - Anti UV Coating Yes - Waterproof/Washable Yes - 1/2 Fire Proof No - Autolock/Instalock Feature No - Weight (Kg) 25 - On Site OEM Warranty 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 C P POKHARNA 305802, City Road, Kishangarh 1 15

Ceiling Fan

Ceiling Fan

Light Emitting Diode LED Fixture- LED tube light Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 3 Year (s) Light Emitting Diode LED Fixture- LED Tube Light ( 1633 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 18 Watt/1800 lumen 18 Watt/1800 lumen, 20 Watt/2000 lumen, 22 Watt/2200 lumen Colour Temperature (K) 5700 2700, 4000, 5700, 6500 Warranty for free replacement (Years) 3 years 2 years, 3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin - Ingress Protection in IP IP 20 - Lamp Shell material Polycarbonate Polycarbonate, Glass LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig Without - Light Source SMD LED Chip - LED Make SEOUL OR EQUIVALENT - Length of tube light (Nominal) (in mm) 1220 - FUNCTIONAL LED lamp efficacy 100 - 1/4 (Lm/W) Colour Rendering Inde (CRI) >/= 80 - Total Harmonics (%) </= 15% - LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes - Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes - Beam Angle (Degree) >/= 120 degree - Operating Voltage range (Volt) 100-300 - Driver Efficiency (%) more than 85% - Surge Voltage withstand (KV) 2.5 KV - LED Chip Efficacy (Lm/W) 130 - Rated Voltage for Performance and life (Volt) 220-240 - Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% - LED Chip Wattage (Individual) (Watt) 0, 25 - Power Factor >/= 0.9 - CERTIFICATIONS BIS Registration certificate under (CRS) number and date R-72000558, 23-10-2017 - Certificare for Yes - 2/4 Luminaire photometric data as per LM79 Certificate No and Date of Luminaire photometric data as per LM 79 report RP-1617-012990, 18.06.2016 - Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes - EMC Test Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Principal/Patel Mahesh Jayantibhai 382017, AMLETHA PRIMARY SCHOOL, TALUKA NANDOD, DIST. NARMADA C/o. Gujarat Energy Development Agency, Udhyog Bhavan, 4th Floor, Wing no-11-12, Sector- 11, Gandhinagar-382017 1633 30

Leg Press - Outdoor Gym Equipments Leg Press - Outdoor Gym Equipments ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Leg Press Double Leg Press Single, Leg Press Double SIZE Length 1000 - Width 800 - Height 1828 - CAPACITY Maximum User Weight ( Kg ) 110 100, 110, 120 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1239 ( Part 1 )- 2004, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true true, false Main Central Pipe 100mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Central Pipe, Class as per IS 1239 Heavy Medium, Heavy, Not applicable for pipe as per IS 1161 Designation of Main Central Pipe ( as per IS 80mm nominal bore G.I. Pipe - 1/5 1161 ) Moving Frame Pipe 32mm Nominal bore G.I. pipe 32mm Nominal bore G.I. pipe, 40mm Nominal bore G.I. pipe Moving Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Moving Frame Pipe ( as per IS 1161 ) 25mm nominal bore G.I. Pipe - Foot Rest Frame Foot Rest Hinging Pipe 32mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe Foot Rest Frame Pipe, Not applicable for M.S. Plates Designation of Foot Rest Frame Pipe ( as per IS 1161 ) 25mm Nominal Bore G.I. Pipe - Connecting Links 32mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 10mm thick MS plates, 12mm thick MS plates Connecting Links Pipe, Not applicable for M.S. Plates and Pipes as per IS 1161 Designation of connecting link Pipe ( as per IS 1161 ) NOT APPLICABLE - MS Foundation Plate Thickness 10 10, 12 Foundation Pipes with anchoring 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 80mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Not applicable for pipe as per IS 1161 Designation of Foundation Pipe ( as per IS 1161 ) not applicable as per IS 1161 - 2/5 Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Nuts and Bolts for Assembly G.I. - Movement must be supplied with bearings Yes - Bearings Tapered Roller Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Seat and Back Rest 3mm thick, HDPE with uniform bending radius to avoid sharp edges 2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges, 3mm thick, HDPE with uniform bending radius to avoid sharp edges, 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges, 2.5mm thick, M.S. Perforated with uniform bending radius to avoid sharp edges, LLDPE with uniform bending radius to avoid sharp edges Foot Rest Aluminum casting material - Closing Caps of open ends of the pipes, bearings, bushes and base G I Caps - Thickness of closing caps ( min ) 2 - All Plastic Components U V stabilised, weather resistance - COLOUR Colour As per buyer's requirements - Paint/Finish Powder Coated, UV resistant - Paint Coating Thickness ( min ) 80 - OTHER REQUIREMENTS Ergonomic Design Yes - 3/5 Foot rest shall be antislip/antiskid Yes - Moving Scope should be Limited Yes - There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free from entrapments and sharp edges Yes - Installation Instructions must be provided Yes - Installation Included Included, Not Included Safety and quality Requirements European Standard EN 16630: 2015 latest - Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) As per European Standard EN 16630 As per European Standard EN 16630, No Registration No and Validity of Registration NOT APPLICABLE - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 2 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lal Chand Bohra 332713, Sita Ram Modi Govt. Sanskrit College Chaoni Neem-Ka-Thane Distt., Sikar, Rajasthan 1 15

backhoes

Light Emitting Diode LED Fixture- LED tube light Average Turn Over of Last 3 Years 04 Lakh (s) Experience with Gov. Required 3 Year (s) Light Emitting Diode LED Fixture- LED Tube Light ( 522 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 18 Watt/1800 lumen 18 Watt/1800 lumen, 20 Watt/2000 lumen, 22 Watt/2200 lumen Colour Temperature (K) 5700 2700, 4000, 5700, 6500 Warranty for free replacement (Years) 3 years 2 years, 3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin - Ingress Protection in IP IP 20 - Lamp Shell material Polycarbonate Polycarbonate, Glass LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig Without - Light Source SMD LED Chip - LED Make SEOUL OR EQUIVALENT - Length of tube light (Nominal) (in mm) 1220 - FUNCTIONAL LED lamp efficacy 100 - 1/4 (Lm/W) Colour Rendering Inde (CRI) >/= 80 - Total Harmonics (%) </= 15% - LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes - Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes - Beam Angle (Degree) >/= 120 degree - Operating Voltage range (Volt) 100-300 - Driver Efficiency (%) more than 85% - Surge Voltage withstand (KV) 2.5 KV - LED Chip Efficacy (Lm/W) 130 - Rated Voltage for Performance and life (Volt) 220-240 - Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% - LED Chip Wattage (Individual) (Watt) 0, 25 - Power Factor >/= 0.9 - CERTIFICATIONS BIS Registration certificate under (CRS) number and date R-72000558, 23-10-2017 - Certificare for Yes - 2/4 Luminaire photometric data as per LM79 Certificate No and Date of Luminaire photometric data as per LM 79 report RP-1617-012990, 18.06.2016 - Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes - EMC Test Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Principal/Patel Mahesh Jayantibhai 382017, NAVAGAM DEDIYAPADA PRIMARY SCHOOL, TALUKA DEDIYAPADA DIST. NARMADA C/o. Gujarat Energy Development Agency, Udhyog Bhavan, 4th Floor, Wing no-11-12, Sector- 11, Gandhinagar-382017 522 30

Online UPS

Television

Drinking Water Cooler

Plastic Body Evaporative Coolers-DESERT COOLER Plastic Body Evaporative Coolers-DESERT COOLER ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/TYPE Nominal cooling capacity ([Cu.M/hr] @ WATT) 5000 Cu.M/hr @ 325 WATT 2000 Cu.M/hr @ 215 WATT, 3000 Cu.M/hr @ 225 WATT, 4000 Cu.M/hr @ 250 WATT, 5000 Cu.M/hr @ 325 WATT Type of Air Cooler Body Plastic Body - Fire Retardant Plastic Yes - Type of Fitting Stand Mounted with castor wheels - CERTIFICATION Conformity to Indian Standard IS:3315 latest - Availability of the Type test report from Central Gov./NABL./ILAC accredited lab. proving/showing conformity to the specification false - Test Report Number & Date NA - Name & address of the Lab NA - GENERIC Fan Motor ISI marked to IS:996 latest - 1/3 Fan Motor 4-pole:RPM 1900 - Fan Motor Speeds(steps) 5 - Power Factor 1 - Submersible Pump Conforming to IS: 11951 latest - Thickness of wood wool Pad 25 - Wire Guard for Pads Yes - Water Level Indicator Yes - Minimum length of ISI marked, 2.5 Metres connecting cable with 3-pin moulded Plug Top, 5/6amps. 2.5 - Warranty (year) 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajai rajay.saxena 471001, Infront Of Distt.Hospital, Near Chhatrasal Chowk Chhatarpur 1 15

almirah- Steel Almirah- Steel ( 11 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest false - No of shelves (Nos) 4 - Type of Shelves Fixed - Locker Provided false - Locking System with the locker NO - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 4 - Number of Glass Sheet fixed in each Almirah door (Nos) N.A - Construction Welded - Lock Three Way bolting device controlled by 6 lever lock - 1/4 MATERIAL Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker 1.0 mm - Length of Glass Sheet ±10 (mm) N.A - Width of Glass Sheet ±10 (mm) N.A - Sheet Thickness of door in mm 1.0 mm - Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) - Sheet Thickness of Shelves 1.0 mm - Sheet Thickness of Pedestal in mm 1.0 mm - Material of Lock steel - Material of Keys steel - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1855 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1 450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 480 430, 455, 480, 486, 270, 3 70, 400 Inside Height of Locker in mm (± 5 mm) N.A - Inside Width of Locker i mm (±5 mm) N.A - Inside Depth of Locker in mm (±5 mm) N.A - 2/4 Width of Stiffner in mm (±5 mm) N.A - Thickness of MS Sheet of Stiffner (in mm) 0.9 mm - Stiffened Pedestal height in mm (±2 mm) 120 - Pedestal Width in mm (±2 mm) 80 - COLOUR & FINISH Finish Synthetic enamel - Colour of Paint ash gray - Packing: Bubble Sheet - CERTIFICATION ISI marked false - CM/L No. - - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Surajkumar RamkripalPalbans h 400076, Maharashtra National Law University, Mumbai 2nd and 6th Floor, MTNL Building, Technology Street, Hiranandani Gardens, Powai, Mumbai, Maharashtra 400076 11 15

Handloom Cotton Bed Sheets Average Turn Over of Last 3 Years 10 Lakh (s) Handloom Cotton Bed Sheets ( 1500 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification BIS specification No. IS:745:2003: Latest - Variety No as per BIS specification Mass (gram per square mtr) Variety No - 1/180 g Variety No - 1/180 g MANUFACTURE Manufacturing Type Handloom - SIZE Size (Length X Width) (cm) 250 X 150 250 X 150 COLOUR Colour White Bleached White Bleached HEMMING Depth of transverse ends Hemming ( min ) 20mm - Sewing Thread 100 dtex X 6, as per IS: 1720 - LOGO AND MARKING Logo/Totem Marking As per buyer's requirements As per buyer's requirements, No Screen Printed Identification Marking (longitudinal Running Strips) As per buyer's requirements As per buyer's requirements Handloom Mark false 1/3 TEST REPORT Availability of Test Report from NABL ILAC accredited or Central Government Lab to prove conformity of products to the specification true Test Report No as buyer requirement - Test Report Date as buyer requirement - Name of the Lab as buyer requirement - Address of the Lab as buyer requirement - Test reports to be furnished to buyer on demand, if claimed to be available Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Surendra Kumar Azad 492001, Dr. Bhim Rao Ambedkar Hospital, Jail Road, Raipur Chhattisgarh 1500 15

Professional Large Format Display

Router

Router

Multifunction Machines

Printer

Pallet Truck

chairs-office

classroom chairs Experience with Gov. Required 5 Year (s) Classroom Chairs ( 120 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Chair Type Foldable Writing pad on One side and Arm on other side Foldable Writing pad on One side and Arm on other side Type of Seat and Backrest Made of Wood Made of Wood Depth of Seat in mm (+/- 10 mm) 460 - Height of Seat in mm (+/- 10 mm) 440 - Width of Seat in mm (+/- 10 mm) 480 - Overall Chair Height in mm (+/- 10 mm) 850 - SEAT DETAILS Thickness of Cushion Used in Seat in mm (+/- 2 mm) 50 - Density of Cushion Used in Seat (Kg/Cubic Metre) 40 - Material of Fabric of Seat Cover 290 GSM cloth fabric - BACKREST DETAILS Density of Cusion Used in Backrest (Kg/Cubic 40 - 1/3 Metre) Thickness of Cushion in Backrest in mm (+/- 2 mm) 50 - Material of Fabric of Backrest Cover 290 gSM Cloth Fabric - Width of Backrest (mm) 483 - Height of Backrest (mm) 432 - SUPPORT/UNDER STRUCTURE Frame Material Teak wood of minimum 25 mm thickness As per GeM Catalogue. Under Storage provided below the Seat YES - Material of under storage MS - Length of Under Storage (mm) NA - Width of Under Storage (mm) NA - DEPTH of Under Storage (mm) NA - WRITING PAD DETAILS Writing Pad Material 18 mm thick prelaminated Particle Board - Writing Pad Size (Length X Width in mm) 550 - MISC Colour of Fabric for Seat and Backrest Black - Finishing of Structure Powder coated - WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand NO - Product having BIFMA certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Baboo lal Bairwa 303503, Rajesh pilot govt.college shyampura road lalsot 120 15

Air Conditioner Air Conditioner ( 9 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/GENERIC Type of Air conditioner High wall Split AC High wall Split AC Technology of AC Non- Inverter (Fixed Speed) Inverter (Variable Speed), Non- Inverter (Fixed Speed) Nominal cooling capacity in Ton (kcal/hr) 2.0 Ton/6000 kcal/hr 2.0 Ton/6000 kcal/hr Coil Material Copper Copper Eco-friendly refrigerant true true, false Yes is better Minimum length of copper pipe and suitable connecting electrical cable for installation and commissioning 3 metre - Packing LIst Indoor+outdoor+Kit - Any other Features NA - CONFORMITY CERTIFICATION BEE Star Rating 3 1, 2, 3, 4, 5, NA Conformity to Indian Standard IS 1391 latest - WARRANTY Warranty on Machine 1 1, 5 1/3 Warranty on Compressor 5 5, 6, 7, 8, 9, 10 Higher is better INSTALLATION Installation and commissioning With Installation and Commissioning With Installation and Commissioning * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Diwakar Prasad Vidyarthi 834010, 3rd floor, New RIADA building, .Namkum Industrial Estate, Namkum, 9 15

revolving chair Revolving Chair ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true true, false Yes is better Back type fixed push back, height adjustable backrest has separate adjustable false true, false 1/5 headrest Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking tilt limitor - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support external & fixed integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels 2/5 Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - Material of Fabric Back Cover leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) N.A - DIMENSION Overall Chair Height ±15mm 920 As per GeM Catalogue. Backrest Height ±15mm 500.0 As per GeM Catalogue. 3/5 Backrest Width ±10mm 550.0 As per GeM Catalogue. Seat Height ±15 mm 420 420, 450, 480, 500, 520 Seat Width ±10 mm 550 440, 520, 550, 460, 360 Seat Depth ±10 mm 550.0 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1.0 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 50 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification NO YES, NO 4/5 Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Baboo lal Bairwa 303503, Rajesh pilot govt.college shyampura road lalsot 30 15

ball valve Ball Valve ( 150 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE/SIZE Pattern Full bored Full bored, Reduced Bored Construction Split Construction One Piece Construction, Split Construction Type of Ends Screwed Ends Flanged Ends, Screwed Ends Type of End Connection Internally Screwed (Parallel Threaded) - Nominal Size (DN) For Flanged Ends in mm 50 As per GeM Catalogue. Nominal Size (DN) For Screwed Ends in inch 2 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2, NA Weight 2.9 - CERTIFICATION Conforming to Indian Standard IS 9890 : latest - ISI Marking false true, false Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the true - 1/3 specification Test Report No And Date 170612 dt. 17-06-2017 - Name and Address of the Lab Spectro Analytical Labs Limited E-41, Okhala Industrial Area PH II New Delhi - GENERIC Material of Body and Body Connector Carbon Steel Cast Iron, Carbon Steel Material of Bolting Carbon Steel - Material of Stem and Gland Carbon Steel - Rust proofed - Type of Operation Handwheel - Material of Wrench Handwheel Malleable Iron - Drain Connection true - Painting of the finished valve true - Finish of the valves Stove enamelled - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandrashekhar Sahu 495223, nagar palika parisad tifra 150 15

Multimedia Projectors

plastic moulded chair Plastic Moulded Chair ( 210 ) Technical Specifications Specification Specification Name Values Allowed Values * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 SANJAY SINGH 202001, 45BN PAC, BORNA, ALIGARH 210 15

Multifunction Machines

Multimedia Projectors

sofas

Language/multilingual software foreign language software Experience with Gov. Required 3 Year (s) Language/Multilingual Software Foreign Language Software ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF LANGUAGE MULTILINGUAL SOFTWARE (GOLDEN) Type of Software Software Software, Appliance Scope Language Learning Software Language Learning Software, Language Typing Software, Language Translational Software Usage Single (Mono) Language Single (Mono) Language, Multi- Language Type of language offered English Hindi, Regional Languages, English, Foreign Languages Name of the OEM Visionet - OEM Model/Part No Online Spears Language Lab - Product Id of OEM VISPL_102 - Software Version Name Spears Language Lab - Date of Launch of Version Jan, 2018 - FEATURES & FUNCTIONALITY Virtual Classroom Sessions, guided by false true, false 1/7 PARAMETERS (GOLDEN) an instructor on a live video feed Customizable Learning true true, false Licensing policy (as per number of users) 10 users 1 user, 10 users, 20 users, 30 users, 40 users & above Deployment Options In Premises In Premises, Off Premises Installation and Demonstration true true, false No. of days Training Provided at Site (DAYS) upto 5 0, upto 5, 6 to 10 Number of Years upto which Support is available from OEM/Franchise online (YEARS) 1 1, 2, 3, 5 FEATURES & FUNCTIONALITY PARAMETERS (GENERIC) Live Classes with other students (up to three per class) and a trained instructor false - Multilingual Interface true - Allows user to convert third party text files to UNICODE text files false - Web application development tool for interactive applications false - Number of Languages offered (Excluding English) Bilingual - Hindi - Languages Offered 2 - Natural Listen, Learn, and Speak sequence true - Audio learning true - Visual learning true - Live online classes "e- tutoring" false - Interactive Flash Cards false - Voice Recognition Systems true - Recording Features true - Self-access learning true - Elementary Skills of true - 2/7 Language Learning Basic Communication Skills of Language Learning true - English, Grammar & Fluency of Language Learning true - Interview Preparation Skills of Language Learning true - Professional Communication Skills of Language Learning true - Business Skills of Language Learning true - Interactive listening via native speaker dialogues and everyday conversations true - Audio and Forum discussion boards class false - Video and Forum discussion boards class true - Skip ahead to the point in the program that's right for the user false - Tracking the user's progress true - Multi-Script Typing Tools false - Text-To-Speech feature true - Unicode Typing Tools false - Intelligent Script Manager false - Support for INSCRIPT (Indian Script) Standard Key Board false - Language 'Spell- Checkers' true - On screen keyboards to expedite content creation and facilitate learning false - Support for Integrated Multi-Currency symbols in the Key Board false - 3/7 Synonym Dictionary true - Official Language Dictionary false - UNICODE Sorting of Data in Excel false - Typing Tutor Interface false - OCR (Optical Character Recognition) system for Indian Languages false - OCR (Optical Character Recognition) system for Foreign Languages false - Offline support true - Unified Virtual Key Board true - Practice sessions true - Testing/Assessments true - Monolithic font false - Document Translation features true - Books Translation features false - Medical and Pharmaceutical Translation features false - Legal Translation features false - General Translation features false - Technical Translation features false - Visa Translation features false - Passport Translation features false - Translation APIs features false - Birth Certificate Translation features false - DTP Desktop Publication features false - Website Designing and Localization features false - Editing features true - 4/7 Proof Reading features false - Data Verification features true - Supported Keyboard Layouts true - Supported Scripts true - Supported fonts true - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Hard Disk Space Required 1 TB - RAM Size required 4 GB - Server requirements Windows - CPU required Dual Core - Other Hardware requirements LAN - Operating Systems supported (Driver) Audio and VGA - Supported Devices USB, Laptop, Desktop, Thin Client, OPS, Mini PC and others - Supported Servers All - Supported Web browsers Modern - Supported Databases All - Supported file formats Any - Supported Networking Protocols TCP IP - Min Processor bench mark score required NA - Number of Devices Managed PC with Monitor, Headphone, Keyboard, Mouse and any other display device with PC - GENERIC PARAMETERS OF LANGUAGE MULTILINGUAL SOFTWARE Free Upgradation to Higher Version within support period YES - Maximum user handling capability 100 at a time - Concurrent user handling capability 100 at a time - Valid Licence copy to be provided YES - Software supplied through Media - List of items included in Media, USB Security - 5/7 the package Dongle, License Certificate, Headphone & Mic Hyper link to Data sheet Www.Languagelabsyst em.Com/Career.Html - No of Softwares sold 1000 - Number of User Referance no 1 with in Government Department email, phone no Of concerned authority where Software/Appliance installed 25 - Details of Government Department email, phone no Of concerned authority where Software/Appliance installed for above Bhagalpur College of Engineering, Email -tpo [email protected], Phone - 0641-2451063 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shiv Nuwal 311604, Kota - Bhilwara Road Mandalgarh 1 15

Domestic Water Heater-geyser

Public place seating chair Experience with Gov. Required 1 Year (s) Public Place Seating Chair ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of Seating Integrated Seat and Backrest - Style with arm and backrest with arm and backrest, with arm and without backrest, without arm and with backrest, without arm and backrest Seating Capacity (Nos) 3 2, 3, 4, 5 Number of arms (Nos) 2 - Delivery status Assembled - Seat Cushion WITHOUT CUSHION - Backrest Cushion WITHOUT CUSHION - MATERIAL Material of Main Frame mild steel mild steel, M S ERW tube, SS 202, SS 304 Material of Seat and Backrest Mild Steel Mild Steel, PU Foam reinforced with 2 mm M S sheet inserts, SS 304, MS RECTANGULAR SECTION PIPE, Perforated MS sheet 1/4 covered with 40 mm cushion cover. Material of Arms cold rolled steel armrest are made up of powder coated high pressure aluminium dye cast, cold rolled steel, MS ERW TUBE, MS RECTANGULAR SECTION PIPE Material of Legs cold rolled steel cold rolled steel, POWDER COATED HIGH PRESSURE ALUMINIUM DYE CAST LEGS, MS round pipe - 1.6 mm thick Material of Side Bar Bracket made up of chrome plated solid steel - Thickness of material of Main Frame in mm 1.4 - Thickness of material of Arms in mm 1.4 - Type of bolts M8 bolts - Thickness of PU Foam for Seat and Backrest ±2(mm) 30 mm - Density of PU Foam for Seat and Backrest ±2(Kg/Cubic Metre) 30 kg/Cubic Meter - Covering Material for Seat and Backrest NA - DIMENSION Overall Length in mm (±10 mm) 850 As per GeM Catalogue. Overall Depth in mm ( ±5 mm) 550 As per GeM Catalogue. Overall Height in mm (±5 mm) 760 As per GeM Catalogue. Seat Height from Floor in mm (±5 mm) 500 mm - Thickness of material of Seat and Backrest (mm) 1.8 MM - CERTIFICATION Conforming to International Standard for Public YES YES, NO 2/4 Seating (*BIFMA X 5 dot 4 or equvalent) COLOUR & FINISH Colour of Covering Material N.A - All M S Strucure Finish Chrome Plated - Colour of Paint silver - All steel component to be epoxy powder coated 60 micron thick - WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 5 MISC Seat and Backrest are Perforated true - Adjuster for legs true - Arms Chrome Plated true - Legs Chrome Plated true - Cushion on Arms false - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rekha Ranawat 307001, Govt, girls College, SIROHI, RAJASTHAN, 307001 15 15

Multifunction Machines

Plastic Body Evaporative Coolers-DESERT COOLER Plastic Body Evaporative Coolers-DESERT COOLER ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/TYPE Nominal cooling capacity ([Cu.M/hr] @ WATT) 3000 Cu.M/hr @ 225 WATT 2000 Cu.M/hr @ 215 WATT, 3000 Cu.M/hr @ 225 WATT, 4000 Cu.M/hr @ 250 WATT, 5000 Cu.M/hr @ 325 WATT Type of Air Cooler Body Plastic Body - Fire Retardant Plastic Yes - Type of Fitting Stand Mounted with castor wheels - CERTIFICATION Conformity to Indian Standard IS:3315 latest - Availability of the Type test report from Central Gov./NABL./ILAC accredited lab. proving/showing conformity to the specification true - Test Report Number & Date 400019, March 2018 - Name & address of the Lab NABL, Panchkula, Haryana - GENERIC Fan Motor ISI marked to IS:996 latest - 1/3 Fan Motor 4-pole:RPM 1600 - Fan Motor Speeds(steps) 3 - Power Factor 0.95 - Submersible Pump Conforming to IS: 11951 latest - Thickness of wood wool Pad 19 - Wire Guard for Pads Yes - Water Level Indicator Yes - Minimum length of ISI marked, 2.5 Metres connecting cable with 3-pin moulded Plug Top, 5/6amps. 2.5 - Warranty (year) 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Satya Prakash Sharma 334004, Camp Office: College of Engineering & Technology, RIICO Karni Industrial Area, Pugal Road Bikaner-334004 5 15

hdpe pipes for water supply Hdpe Pipes For Water Supply ( 250 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 4984 Latest Yes - ISI Marked false true, false CM/L No 0 - Raw Material Material Virgin - Material Grade PE 100 PE 63, PE 80, PE 100 Dimensions Pressure Rating at 30 degree Centigrate PN 16 PN 2.5, PN 4, PN 6, PN 10, PN 12.5, PN 16 Nominal Diameter (mm) 75 As per GeM Catalogue. Length of Pipe (Metre) 750 As per GeM Catalogue. Supply Type and Colour Supply Type Coils Coils, Length Colour of Pipe black - Test Report Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - 1/3 Test Report No 246957 - Test Report Date 12-04-2017 - Name of the Lab KISAN LAB - Address of the Lab bhopal - Test Report to be furnished on request by Buyer Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramashankar Tiwari 486223, nagar parishad theonthar near by janpad panchayat teonthar distt- Rewa (MP) 250 15

Fabric Pin Up Notice Boards

Desktops

revolving chair Revolving Chair ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt As per GeM Catalogue. Tilt Tension Adjustment false - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design false true, false Yes is better Back type fixed push back, height adjustable Backrest is made of two pcs injection Backrest is made of two pcs injection - 1/6 moulded frame moulded frame backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved false - Locking mechanism false - Type of locking N.A - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Chrome finish with 5 wheels Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels 2/6 Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam Covered With pure leatherite pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram - DIMENSION Overall Chair Height 950 As per GeM Catalogue. 3/6 ±15mm Backrest Height ±15mm 500 As per GeM Catalogue. Backrest Width ±10mm 410 As per GeM Catalogue. Seat Height ±15 mm 450 420, 450, 480, 500, 520 Seat Width ±10 mm 440 440, 520, 550, 460, 360 Seat Depth ±10 mm 400 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.3 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 25 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 25 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand NO YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO 4/6 Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anil Kumar N 131305, BHAGAT PHOOL SINGH MAHILA VISHWAVIDYALAYA, KHANPUR KALAN 3 15

Televisions

Desktops

Televisions

Executive Table

Class Room Desking and Seating Class Room Desking And Seating ( 32 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING ONLY TABLE/DESK ONLY TABLE/DESK, ONLY SEATING, INTEGRATED DESK CUM SEATING, INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK, ONLY TABLE/DESK WITH SHELF/STORAGE UNDER DESK Desking Configuration TWO SEATER SINGLE SEATER, TWO SEATER, THREE SEATER, FOUR SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 850 As per GeM Catalogue. DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18 mm thick prelaminated Particle Board As per GeM Catalogue. Material of Support Structure or Side Pannel Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm As per GeM Catalogue. 1/3 Height of Desk Top in mm (±5 mm) 500 As per GeM Catalogue. Width of Desk Top in mm (± 5 mm) 600 As per GeM Catalogue. SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 18 mm thick prelaminated Particle Board As per GeM Catalogue. Material of Support Structure Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm As per GeM Catalogue. Material of Seat Cushion ONLY DESK NO SEATING 40 mm thick PU foam of density 40 gram per cubic cm, WITHOUT CUSHION, ONLY DESK NO SEATING Width of Seating in mm (±10 mm) ONLY DESK NO SEATING As per GeM Catalogue. Height of Seat in mm (±10 mm) ONLY DESK NO SEATING As per GeM Catalogue. Width of backrest if provided in mm (± 5 mm) No Backrest As per GeM Catalogue. Back Support for Seating of Same materail as Seating back support not provided Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) Can be configured as per buyer's choice within offered technical details - Colour of finish brown - Desk top finishing All sides Edge to be banded with PVC tape of 2 mm thick with help of hot melt glue - Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) NA - WARRANTY Warranty period in number of years 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 2/3 1 Lal Chand Bohra 332713, Sita Ram Modi Govt. Sanskrit College Chaoni Neem-Ka-Thane Distt., Sikar, Rajasthan 32 15

Modular Work Stations/Modular Staff Office Packages Modular Work Stations/Modular Staff Office Packages ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values SELLING UNIT Selling unit Order Quantity is number of Pieces Clusters of specified number of seats. (Price given is for full cluster module and not per seat) Order Quantity is number of Pieces Clusters of specified number of seats. (Price given is for full cluster module and not per seat) GENERIC Type of system Desk band system Tile based system (shape fit tiles), Hybrid panel based system (combination of sliding & snap fit tiles), Desk band system Type/Shape of cluster Single Seater Rectangular Cluster Single Seater L Shape Cluster, Single Seater Rectangular Cluster, Double Seater C shape Cluster with Curvilinear Top, Double Seater T shape Cluster with Curvilinear Top, Double Seater Rectangular shape Cluster with Side By Side sitting, Double Seater Rectangular shape Cluster with 1/5 Back to Back sitting, Four Seater H Shape Cluster with Curvilenear Top, Four Seater Plus Shape Cluster with Curvilenear Top, Four Seater Rectangular Cluster with Straight Line Side by Side Sitting, Four Seater Rectangular Cluster with 2 X 2 Opposite Sitting Wire Management for electric switch Skirting race-way - Foot edge of table top Flat with PVC lipping - Plain edge banded with 2mm PVC tape - Construction of drawer unit Wooden front with PVC lipping Flat metal front, Wooden front with PVC lipping, Wooden front post form, All wood pedestal, Full Metal, Wooden front with teak wood lipping Construction of pedestal Free standing full height with castor Top supporting, Free standing full height with castor, free standing low height with castor Type of pedestal Three drawer - Locking system of pedestal Individual locking - Work top support Gable end made of prelaminated particle board Gable end made of prelaminated particle board, M S leg, Commercial Block Board BWP grade, Decorative Block Board BWP grade, Commercial Block Board MR Grade, Decorative Block Board MR Grade Type of Drawer unit Moveable without castor wheels - MATERIAL Frame material for work station Powder coated CRCA hollow system As per GeM Catalogue. Material of table top Prelaminated particle board Prelaminated particle board, MDF board, E-1 grade green board, Commercial Block 2/5 Board BWP grade Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Teak carved wood, Other wood Material of tiles for top laminate Fabric tackable-fabric upholstered metal tile with PE foam, fabric magnetic - fabric upholstered metal tile, white board made of decorative laminate with white glossy, high pressure laminate, laminate, glass writing board plus back painted sandwich glass tiles, fabric tackable plus fabric magnetic plus white board, fabric tackable plus fabric magnetic plus glass writing board, N.A Material of intermediate tiles high pressure laminate As per GeM Catalogue. Material of bottom tiles prelaminated particle board tile Material tile powder coated, prelaminated particle board tile, Commercial Block Board BWP grade tile, Decorative Block Board BWP grade tile, Commercial Block Board MR Grade tile, Decorative Block Board MR Grade tile, N.A Overhead Storage Provided No Overhead Storage - DIMENSION Length of table top (main frame) ±10 mm(main frame) 1200 mm As per GeM Catalogue. Length of table top (Return Frame)± 10mm 1200 mm 900 mm, 1050 mm, 1200 mm, 1350 mm, 1500 mm, 1650 mm, 1800 mm, NA FOR 3/5 RECTANGULAR, 915 mm, 1220 mm Depth of table top ± 10mm 600 mm 450 mm, 600 mm, 750 mm, 610 mm Height of table top ±10mm 750 mm - Thickness of table top ±2mm 25 mm - Overall height of work station partition ±10mm 1200 mm As per GeM Catalogue. Thickness of side partition/panel ±2mm 45 mm As per GeM Catalogue. Thickness of main frame ±5 mm 50 mm As per GeM Catalogue. Size of drawer unit ( WidthXDepthXHeigh t) ±10mm 390 X 440 X 147 (mm) 390 X 440 X 147 (mm), 390 X 590 X 147 (mm), 450 X 440 X 147 (mm), 450 X 590 X 147 (mm), NO DRAWER UNIT, 390 x 440 x 160 (mm), 400 X 470 X 130 (mm) Size of file box (Widt hXDepthXHeight) ±10mm 390 X 440 X 296 (mm) 390 X 440 X 296 (mm), 390 X 590 X 296 (mm), 450 X 440 X 296 (mm), 450 X 590 X 296 (mm), NO FILE BOX, 390 x 440 x 260 (mm), 400 X 470 X 330 (mm) FINISH Powder coating thickness of frame 40 micron - CERTIFICATION Test reports to be furnished to buyer on demand NO - BIFMA level-3 NO - OEM of offered product is ISO 9001:2015 certified YES - OEM of offered product is ISO 14001:2015 certified YES - OEM of offered product is ISO 18001:2007 certified YES - Green guard certification YES - 4/5 WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 INSTALATION COMMISSIONING INSTALLATION COMMISSIONING The price includes the cost of installation and commissioning of the entire unit at consignee site (excluding the cost of Civil Work which would be got done by the Consignee at his own cost as per design and layout plan provided by the seller). The price includes the cost of installation and commissioning of the entire unit at consignee site (excluding the cost of Civil Work which would be got done by the Consignee at his own cost as per design and layout plan provided by the seller). * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lal Chand Bohra 332713, Sita Ram Modi Govt. Sanskrit College Chaoni Neem-Ka-Thane Distt., Sikar, Rajasthan 1 15

Hardware Security Module (HSM) Hardware Security Module (HSM) ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Regulatory Compliance FIPS 140-2 Level 2, FIPS 140-2 Level 3, PCI DSS FIPS 140-2 Level 2, PCI DSS Application Programming Interfaces (APIs) PKCS#11 PKCS#11 Supported Operating Systerm Windows, Linux, Solaris, I BM AIX, HP-UX - Virtual System Support Hyper-V - Memory within HSM (MB) 16 16 Number of Partitions within HSM 2 2 Number of Partitions Expandable upto within HSM 100 100 Key Storage Area Inside HSM Inside HSM If Inside HSM, Key Storage Capacity for RSA 2048 Bit 9500 - If Inside HSM, Key Storage Capacity for DES 140000 - 1/5 If Inside HSM, Key Storage Capacity for triple DES 123000 - If Inside HSM, Key Storage Capacity for AES 128-256 112000 - Supported Functionality Encryption/Decryption Signing - Supported Cryptrographic Algorithm (Symmetric) AES - Supported Cryptrographic Algorithm (Asymmetric) ECC - Random Number Generation Yes - Signing Speed RSA 2048 Bit (Transactions per second) 1200 1200 Signing Speed AES 256 Bit (Transactions per second) 2250 2250 Key generation speed (number of keys generated per second) 11 - Host Interface, supported IPv4 and IPv6 DUAL Gigabit Ethernet. - Management and Monitoring SNMP - Audit and Logging Yes - High Availability Yes - Safety and Environmental Compliance UL - Form Factor, 19 " Rack Mountable 1U - Weight (Kg) 12.7 - Input Voltage 230V AC +/- 10%, 50Hz - Maximum Power Consumption (Watts) 180 - Operating Temperature Range (Degree C) 35 - Operating Humidity (RH) (%) 95 - 2/5 On Site OEM Warranty (Years) 3 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Paritosh Dongaonkar 492001, OFFICE OF THE CHiPS SDC BUILDING CIVIL LINES 1 15

Game kits or Rocking Hippo Game Kits Or Rocking Hippo ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Physical Characteristics Material High Density Polypropylene - Colour(main body) White, Yellow - Colour(handle, wheel and base) Red, Blue - Weight of single wheel(Min) 60 - Weight of the (Min) 29 - Weight of single rocking base(Min) 185 - Weight of main body(Min) 500 - Load bearing capacity (IN Kg) 0.75 - Dimensions Main Body(L x H x W)(in mm) 670 x 400 x 250 - Handle Length(in mm) 240 - Handle Diameter(in mm) 25 - Wheel Diameter(in mm) 135 - Thickness of Zinc Plated Rods(Min)(in 5 - 1/3 mm) Packing Quantity per pack 1 - Packing Type PLASTIC COVER - Test Report Details Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification No - Test Report to be Submitted to the Buyer on demand (Write NA if test report not available) NA - Test Report Number(Write NA if test report not available) NA - Test Report Date(Write NA if test report not available) NA - Name of the Lab(Write NA if test report not available) NA - Address of the Lab(Write NA if test report not available) NA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lal Chand Bohra 332713, Sita Ram Modi Govt. Sanskrit College Chaoni Neem-Ka-Thane Distt., Sikar, Rajasthan 10 15

Executive Table, chairs-office, revolving chair, Executive Computer Table Experience with Gov. Required 2 Year (s) Executive Table ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Mode of supply Assembled Ready To Use Assembled Ready To Use, Knocked Down To Be Assembled At Consignee Site By The Seller, Knocked Down To Be Assembled At Consignee Site By Consignee Himself Frame type Free standing - Understructure of table Gable end and modesty panel - Storage provided Both side One side, Both side, No Storage Keyboard tray Provided Provided, Not provided Foot rest Provided Provided, Not Provided MATERIAL Table top Material Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest MDF board of grade SBG II of IS 12406/Latest, Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Late st, Commercial Block Board BWP grade 1/20 Conforming to IS 1659, Decorative Block Board BWP grade Conforming to IS 1659, Commercial Block Board MR Grade Conforming to IS 1659, Decorative Block Board MR Grade Conforming to IS 1659, Teak wood, Carved teak wood, Other wood Gable end and modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest, Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Late st, Commercial Block Board BWP grade Conforming to IS 1659, Other wood, NO Gable end and modesty panel Leg Material Other wood Teak wood, NO LEGS MISC Table top long sides To be post form half round profile with corner edge bending - Table top plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue - Gable end and modesty panel plain side Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue - 2/20 Number of buffers provided N.A - DIMENSION Thickness of table top ±2mm 19 5, 9, 12, 15, 19, 25, 38 Thickness of gable end and modesty panel ±2mm 19 - Length of table top ±10mm 1500 900, 1200, 1500, 1800, 2 100, 1372, 1830 Depth of table ±10mm 750 600, 650, 700, 750, 850, 9 50, 1050, 1100, 915, 610 Height of table ±10mm 750 - Dimension of leg(mmXmm) ±5mm 40mmX40mm 40mmX40mm, 50mmX5 0mm, 60mmX60mm, No legs STORAGE UNIT Number of Storage unit provided Four storage Single storage, Double storage, Triple storage, Four storage, No storage Width of storage unit ±10mm 600mm - Depth of storage unit in mm (±10mm) 600 - Height of smallest storage unit ±5mm 125mm - Height of medium storage unit ±5mm 200mm - Height of largest storage unit ±5mm 305mm - KEYBOARD TRAY Type of keyboard tray Prelaminated particle board keyboard tray - Material of keyboard tray and Right angle L- type supporting bracket Three layer prelaminated particles board(wood product) of grade II type II of IS 12823/Latest - Keyboard adjustablity underdesk keyboard arm - fixing of supporting bracket With telescopic - Length of telescopic channe±l0mm 400mm - Average weight of telescopic channel ±50Gms 500Gms per set - Keyboard front width±10mm 600mm - 3/20 Keyboard depth±10mm 500mm - Keyboard height±10mm 150mm - Finish of exposed edges of keyboard tray To be banded with 0.5-1.0mm thick PVC tape with the help of hot melt glue - Material thickness of keyboard tray ±1mm 19mm - FOOTREST Material of footrest Three layer prelaminated particles board(wood product)conforming to grade II type III of IS 12823/Latest - Length of footrest ±10mm 600mm - Depth of footrest ±10mm 350mm - Height of footrest ±10mm 125mm, 75mm - Finish of exposed edges To be banded with 0.5-1.0mm thick PVC tape with the help of hot melt glue - Material thickness of footrest ±2mm 19mm 5mm, 9mm, 12mm, 15m m, 19mm, 25mm, 38mm, N.A COLOUR & FINISH Table top finish Laminate in colour with matt finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on other side - Table top shade As per Buyer's choice - WARRANTY Warrantee period in number of years 3 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand YES - Product having BIFMA certification YES - OEM of offered product is ISO 9001:2015 certified YES - 4/20 OEM of offered product is ISO 14001:2015 certified YES - OEM of offered product is ISO 18001:2007 certified YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Khulesh Kumar Sahu 490023, Bhilai Municipal Corporation Near GE Road Supela Bhilai 490023 4 15 Chairs-office ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest true - Chair Type With Arms With Arms, Without Arms Type of Seat and Backrest Padded with Polyurethane Foam Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type 4 Legs Cantilever, 4 Legs Castors Without With, Without MATERIAL Type of Wood used in Polythene cane Chair hot pressed board solid wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover leatherite knitted with cane, leather foam, leather, leatherite, polyster, N.A Thickness of 12 mm 12 mm, 15 mm, 18 5/20 Plywood used in Backrest IN MM (±1 mm) mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material MS MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 40 Kg/Cub.M - Material of Fabric of Seat Cover polyurathane black leatherite, knitted with cane, fabric, polyur athane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 40 Kg/Cub.M - Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 18 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 220 Gram per Sq Meter 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material chrome mild steel As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 40 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 40 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type nylon rubber - DIMENSION Size of Material (mm) 16 gauge tubular pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe Chair Height ±15(mm) 1000 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 mm, 890 mm, 950 6/20 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 550 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 650 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 480 400, 430, 460, 480, 500, 3 80 Backrest Width ±10(mm) 550 mm 350 mm, 480 mm Backrest Height ±10(mm) 600 mm As per GeM Catalogue. Arm Length ±5(mm) 250 mm 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) 30 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black - Paint Type chrome chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint NA - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 YES - Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO 7/20 WARRANTY Warranty period in number of years 2 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Khulesh Kumar Sahu 490023, Bhilai Municipal Corporation Near GE Road Supela Bhilai 490023 20 15 Revolving Chair ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type 360 Degree swivel, posture control with multilocking position synchronized mechanism As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame - backrest has separate adjustable headrest false 8/20 Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking 3-Position Locking - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels 9/20 Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 60 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) NA - Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover foam laminated mesh fabrics foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram - DIMENSION Overall Chair Height ±15mm 1140 As per GeM Catalogue. Backrest Height ±15mm 520 As per GeM Catalogue. 10/20 Backrest Width ±10mm 550 410, 440, 520, 5 50, 680, 720 Seat Height ±15 mm 480 420, 450, 520 Seat Width ±10 mm 550 440, 550, 4 60 Seat Depth ±10 mm 440 400, 420, 540 Thickness of M S Plate Joining the under structure with Seat 2 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 60 As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota NO YES, NO * Bold specifications are the golden parameters. 11/20 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Khulesh Kumar Sahu 490023, Bhilai Municipal Corporation Near GE Road Supela Bhilai 490023 8 15 Revolving Chair ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type knee tilt synchronic As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame - backrest has separate adjustable headrest true Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking tilt limitor - Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & 12/20 right), N.A MATERIAL Pedestal Base Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, 19 mm (+/- 2 mm) round 13/20 SS pipe with cushion, WITHOUT ARM seat material PU Foam Covered With pure leather pressed and moulded plywood with polypropylene cover, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - Material of Fabric Back Cover pure leather mesh fabric, N.A Material of Fabric of Seat Cover pure leather foam laminated mesh fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) N.A - DIMENSION Overall Chair Height ±15mm 1280 As per GeM Catalogue. Backrest Height ±15mm 730 As per GeM Catalogue. Backrest Width ±10mm 550 410, 720 Seat Height ±15 mm 500 420, 4 60 Seat Depth ±10 mm 520 400, 540 14/20 Thickness of M S Plate Joining the under structure with Seat 1 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Khulesh Kumar Sahu 490023, Bhilai Municipal Corporation Near GE Road Supela Bhilai 490023 8 15 15/20 Executive Computer Table ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of Computer Table Computer table with key board drawer and table top - Mode of Supply Knocked Down To Be Assembled At Consignee Site By The Seller - Construction of Computer/Printer Table Gable end and modesty panel - Frame type Free standing - MISC Table top long sides Edge banded with PVC tape of 2 mm thick with help of hot melt glue - Table top plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue - Gable end modesty panel plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue - Number of buffers provided 4-Nos. at bottom - Wheels provided NO - FINISHING AND PACKING Packing Gutta Packing - Colour of Top - - MATERIAL Material of table top, keyboard and drawer Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest MDF board of grade SBG II of IS 12406/Latest, Decorative Block Board MR Grade Conforming to IS 16/20 1659, Other wood Bottom side of top N.A - Gable end and Modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest, Other wood Leg Material NO LEGS Teak wood, NO LEGS DIMENSION Table top thickness ±2mm 25 - Thickness of gable end and modesty panel ±2mm 19 - Dimension of leg(mmXmm) ±5mm No legs - Length of table in mm (±15 mm) 1220 As per GeM Catalogue. Depth of table in mm (±10mm) 610 460, 610, 760, 1065, 1220, 1370, 1525, 1675, 1830 Height of table in mm (±10mm) 760 610, 685, 840, 9 90 Width of outside drawer on top right side of the table with ball bearing (±5mm) 300 - Depth of outside drawer±5mm 430 - 17/20 Height of outside drawer±5mm 100 - KEYBOARD TRAY Type of keyboard tray Prelaminated particle board keyboard tray Metal keyboard tray, Plastic PVC keyboard tray, Stainless steel keyboard tray, Wooden keyboard tray, Teak wood keyboard tray, MDF board keyboard tray, Prelaminated particle board keyboard tray, Commercial board keyboard tray Material of keyboard tray and Right angle L- type supporting bracket Three layer prelaminated particles board(wood product) of grade II type II of IS 12823/Latest - Keyboard adjustablity underdesk keyboard arm - fixing of supporting bracket With telescopic - Length of telescopic channel ±l0mm 250mm - Average weight of telescopic channel ±50Gms 300Gms per set - Keyboard front width±10mm 600mm - Keyboard depth±10mm 300mm - Keyboard height±10mm 100mm - Finish of exposed edges of keyboard tray To be banded with 0.5-1.0mm thick PVC tape with the help of hot melt glue - Material thickness of keyboard tray ±1mm 12mm - FOOTREST Material of footrest No footrest Flat single layer prelaminated MDF board conforming to having designation PLMDF-22 of IS 14587/Latest, Three layer prelaminated particles board(wood product)conforming to grade II type III of IS 12823/Latest, Teak 18/20 wood, No footrest Length of footrest ±10mm N.A - Depth of footrest ±10mm N.A - Height of footrest ±10mm N.A - Finish of exposed edges N.A - Material thickness of footrest ±2mm No footrest 5mm, No footrest WARRANTY Warrantee period in number of years 2 1, 5 CERTIFICATION Test reports to be furnished to buyer on demand YES - Product having BIFMA certification NO YES, Bhilai Municipal Corporation Near GE Road Supela Bhilai 490023 1 15 19/20

Rack Steel Adjustable - JSS Specification Experience with Gov. Required 2 Year (s) Rack Steel Adjustable - JSS Specification ( 12 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to defence specification JSS 7105 - 17:2010 (revision No.2) - Frame type perfectly in upright and straight position - Components Blanks for the side- shelves-dividers and kick plate - Shelves fitted At the right angles to the sides and to be parallel to each other - Divider fitted Parallel to the sides and to be at right angle to the shelves - Mode of Supply Knocked Down To Be Assembled At Consignee Site By Consignee Himself - MATERIAL & MATERIAL THICKNESS Material of back/sides/d ividers/shelves Mild steel sheet 1mm thick Grade O-1079 conforming to IS:1079:1994 - Material of Kick plate Mild steel sheet 1.25mm thick Grade O-1079 conforming to - 1/4 IS:1079:1994 Material of screw metric hexagon head coarse pitch Black steel 4.6 M6 X 14mm long(5305-002 410) conforming to IS:1363(Part 3):2002 - Nuts metric hexagon Black steel M6(5310-000 547) conforming to IS 1363(part 3):2002 - DIMENSION Overall height ±3mm 1755 - Overall width ±3mm 915 - Overall depth ±2mm 410 - Distance between bottom shelves and floor ±2mm 130 - Distance between bottom shelves and first shelves ±2mm 480 - Distance between first shelves and second shelves ±2mm 460 - Distance between Second shelves and third shelves ±2mm 380 - Distance between third shelves and top shelves ±2mm 305 - Divider at a distance of 305 - COLOUR AND FINISHING Colour Paint RFU priming G.S brushing/spraying red oxide of Iron zinc chromate ISC 446 conforming to IS 2074:1992 - Finish Paint RFU finishing. war equipment air-drying brushing/spraying with O.G.scamic No.314 conforming to IS:8982:1991 - MISC Holes/slots In the sides/shelves dividers/back and kick plate to be accurately drilled/punched - Size and number of holes 22 numbers of 7mm size holes on both side to suit the shelves - Holes/slots in the various components Should be adequate - 2/4 Ends of the sides/shelves/dividers and kick plate To be double fold after cutting - Bolts/Screws All components secured in position by means of bolts/screws - Number of divider 2 Numbers in each shelves parallel to the sides - Dressing of Components free from crack/surface free from distortion/no burrs in holes - CERTIFICATION Test reports to be furnished to buyer on demand NO - WARRANTY Warranty period in number of years 3 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Khulesh Kumar Sahu 490023, Bhilai Municipal Corporation Near GE Road Supela Bhilai 490023 12 15

almirah- Steel Experience with Gov. Required 2 Year (s) Almirah- Steel ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest true - No of shelves (Nos) 3 - Type of Shelves Fixed - Locker Provided true - Locking System with the locker YES - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 1 - Number of Glass Sheet fixed in each Almirah door (Nos) N.A - Construction Welded - Lock Three Way bolting device controlled by lock - 1/4 MATERIAL Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker 1.0 mm - Length of Glass Sheet ±10 (mm) N.A - Width of Glass Sheet ±10 (mm) N.A - Sheet Thickness of door in mm 1.0 mm - Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) - Sheet Thickness of Shelves 0.8 mm - Sheet Thickness of Pedestal in mm 0.8 mm (Minimum) - Material of Lock steel - Material of Keys steel - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1155 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1 450 Width in mm (± 7 mm) 760 760, 910, 1023, 700 Depth in mm (±5 mm) 430 430, 455, 480, 486, 270, 3 70, 400 Inside Height of Locker in mm (± 5 mm) N.A - Inside Width of Locker i mm (±5 mm) N.A - Inside Depth of Locker in mm (±5 mm) N.A - 2/4 Width of Stiffner in mm (±5 mm) N.A - Thickness of MS Sheet of Stiffner (in mm) N.A - Stiffened Pedestal height in mm (±2 mm) 125 - Pedestal Width in mm (±2 mm) 80 - COLOUR & FINISH Finish Synthetic enamel - Colour of Paint dark gray - Packing: Gutta Packing - CERTIFICATION ISI marked false - CM/L No. - - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Khulesh Kumar Sahu 490023, Bhilai Municipal Corporation Near GE Road Supela Bhilai 490023 1 15

automotive vehicles pneumatic tyres Automotive Vehicles Pneumatic Tyres ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Category Of Pneumatic tyres Normal Road Tyre Normal Road Tyre, Special use Tyre: mixed used, Restricted speed: snow tyre Tyres Tubeless With Tube, Tubeless, Without Tube Conformity to Indian Standrad for Pneumatic Tyres IS:15633 latest for Automotive vehicles: Pneumatic tyre for passenger car Vehicles- Diagonal and radial ply IS:15627 latest for Automotive vehicles: Pneumatic tyre for two and three wheeled motor Vehicles, IS:15633 latest for Automotive vehicles: Pneumatic tyre for passenger car Vehicles- Diagonal and radial ply, IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles- Diagonal and radial ply Conformity to Indian Standrad for Pneumatic Tubes NA for Tubeless TYRES IS:13098 latest for Automotive vehicles: Tubes for Pneumatic tyre, NA for Tubeless TYRES ISI MARKED (for Yes Yes 1/3 Tyres) CM/L No and validity date)(for Tyres - - ISI MARKED (for Tubes) NA for Tubeless and without tube Yes, NA for Tubeless and without tube CM/L No and validity date(for tubes) - - Type of tube NA for Tubeless and without tube - Manufactures name and Trade Name - - Tyre-size Designations 175/65R14 - Tube-size Designations NA FOR TUBELESS TYRES - Structure of Tyre Radial Diagonal or bias ply, Bias-belted, Radial, Reinforced or Extra Load Ply Rating NA - Speed Category - - Load indicas - - Side Well (mm) 114 - Inner area of Tyers (mm) 403 - Section Width (min)(mm) 175 - Overall Width (max)(mm) 175 - Section Height (mm) 114 - Nominal Aspect Ratio(mm) 65 - Outer diameter (min)(mm) 490 Nominal Rim Diameter(mm) 355 Maximum load Rating(%) 100 Conformity to AIS-044 Yes - Availability of Type Test Report covering complete test parameters as per relevant BIS spcification latest for Tyre type, from any ILAC/NABL YES - 2/3 accredited/Central Gov. LAB. Test cetificate No. - - Test Report Date - - Name and address of the Lab where test Conducted - - Others Certificate ie ROHS, WHO, GMP etc - - Warranty Time 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dinesh Kumar 491001, divional forest office, panch building, jail road Durg 5 15