Organization Name Tender Results

scanners

LED Luminaire (For Road and Street Lights) LED Luminaire (For Road And Street Lights) ( 140 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 18W As per GeM Catalogue. Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 - 1/7 Warranty for free replacement (in years) 2 2, 3, 4, 5 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 90 to 300 Volts AC at 50 Hz+/-2 - Automatic Higher Cut off voltage above 300 volt Yes - Rated voltage 230 V AC 50 Hz - AC Power Factor at full load ≥ 0.95 - Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes - Total Harmonics Distortion ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes - OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000+/-500K - Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - 2/7 Operating temperature range -20 deg. C to +50 deg. C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=5KV - The luminaire shall be protected against surges and transients of >/=10KV (External) Yes - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal Yes - 3/7 between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 2 Nos. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 - Driver components shall be industrial grade or above Yes - PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes - Suitable connector shall be provided for LED connection between driver output and LED Yes - Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, 100 cm MARKING "Manufactures Name and and brand on the aluminium die cast body " Engraved/Embossed - Manufacturer’s name, model number, serial number Yes - Date of manufacture (month-year), and lot Yes - 4/7 number as identification mark inside each unit and the outside of each packaging box The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes - Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes - REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND - System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer Yes - 5/7 consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anandkumar Sudhakar Khune 441107, Municipal Council, Saoner, Nagpur Chhindwada national Highway, Tah- Saoner, Dist. Nagpur, Maharashtra, Pin- 441107 140 15

Air Conditioner Air Conditioner ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/GENERIC Type of Air conditioner High wall Split AC High wall Split AC Technology of AC Inverter (Variable Speed) Inverter (Variable Speed) Nominal cooling capacity in Ton (kcal/hr) 1.5 Ton/4500 kcal/hr 1.5 Ton/4500 kcal/hr Coil Material Copper Copper Eco-friendly refrigerant true true, false Yes is better Minimum length of copper pipe and suitable connecting electrical cable for installation and commissioning 3 metre - Packing LIst INDOOR UNIT, OUT DOOR UNIT, 10FEET PIPE, REMOT - Any other Features OFF TIMER, SLEEP MODE, DISPLAY ON REMOT - CONFORMITY CERTIFICATION BEE Star Rating 5 5 Conformity to Indian IS 1391 latest - 1/3 Standard WARRANTY Warranty on Machine 1 1.0 Warranty on Compressor 5 5.0 Higher is better INSTALLATION Installation and commissioning Without Installation and Commissioning Without Installation and Commissioning * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jagdish Prasad 304804, GOVERNMENT P.G COLLEGE NH-12, CISF ROAD, DEOLI 2 15

Air Conditioner Air Conditioner ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/GENERIC Type of Air conditioner High wall Split AC High wall Split AC Technology of AC Inverter (Variable Speed) Inverter (Variable Speed) Nominal cooling capacity in Ton (kcal/hr) 2.0 Ton/6000 kcal/hr 2.0 Ton/6000 kcal/hr Coil Material Copper Copper Eco-friendly refrigerant true true, false Yes is better Minimum length of copper pipe and suitable connecting electrical cable for installation and commissioning 3 metre - Packing LIst Remote control, cell & instruction manual - Any other Features 100% copper, Hitachi air conditioner are designed to work in ambient temperature upto 52 degree C, noise level 33 DB - CONFORMITY BEE Star Rating 5 5 1/3 CERTIFICATION Conformity to Indian Standard IS 1391 latest - WARRANTY Warranty on Machine 1 1.0 Warranty on Compressor 5 5.0 Higher is better INSTALLATION Installation and commissioning Without Installation and Commissioning Without Installation and Commissioning * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jagdish Prasad 304804, GOVERNMENT P.G COLLEGE NH-12, CISF ROAD, DEOLI 2 15

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 31 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 36A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CB436AC - Printer Model number/numbers for which Cartridge is suitable HP LaserJet M1522n MFP Printer, HP LaserJet M1522nf MFP Printer, HP LaserJet P1505 Printer, HP LaserJet P1505n Printer - Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 2000 - * Bold specifications are the golden parameters. 1/2 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ramesh Kumar 110088, Kasturba Institute of technology Pitampura Delhi 31 15

OEM Cartridge/Consumable OEM Cartridge/Consumable ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Product Class OEM - Brand HP - Type of Cartridge/Consumable Toner - Colour of Cartridges/Consumable s Black - Ink/Toner/Drum Model number HP 55A Black Original LaserJet Toner Cartridge - Corresponding Part number/code CE255A - Printer Model number/numbers for which Cartridge is suitable HP LaserJet Ent 500 MFP M525dn Printer, HP LaserJet Ent 500 MFP M525f Printer, HP LaserJet Ent Flow MFP M525c Printer, HP LaserJet P3015 Printer, HP LaserJet P3015d Printer, HP LaserJet P3015dn Printer, HP LaserJet P3015x Printer, HP LaserJet Pro MFP M521dn Printer - 1/2 Yield of the Cartridge as per ISO/IEC:19752/2 004(E)for BK & ISO/IEC:19798/2007(E) for colour (Numbers) 6000 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bikash Kumar Pandey 800015, Finance Department Main Secretariat Patna Bihar 5 15

diesel generators- DG Sets Diesel Generators- DG Sets ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 10 10 No of Phase - Three Phase ENGINE Make of Engine - - Model Number of Engine - - Capacity of Engine (cc) - - Engine Power (kWm) - - ISI Marking to IS :10001 for engine true - Type of Engine cooling Liquid Cooled Air Cooled, Liquid Cooled Type of governer Mechanical Mechanical, Electronic Class of governer A1 A0, A1, A2 Number of cylinders (nos) 2 - No of Strokes (nos) 4 - Rated RPM of Engine (RPM) - 1500, 3000 Overload capacity for one hour for every 11 hours continuous 10 - 1/4 running at full load (%) Specific Fuel Consumption (gm/kWh) - - Starting voltage (volt) 12 - ALTERNATOR AC GENERATOR(ALTER NATOR) Make - - AC GENERATOR(ALTER NATOR) model Number - - Rating of AC Generator (KVA) 10 - Power Factor of AC generator 0.8 - Efficiency at rated Power factor at 75% of full Load 84.5 - Compliance of Alternator to IS:13364(part-1) Yes - Type of alternator Brushless - Voltage Regulation Grade VG 3 - Alternator IP Rating IP 23 - Class of Insulation H - CONTROL PANEL Control Panel AMF Manual, AMF IP Rating of Control Panel IP 54 - ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6, 1.8, 2, 1.2 Thickness of Foam 25 - Density of Foam for sound insulation 26 - Noise level at 1 meter (dB) 71 - BATTERY Battery Type & Specification Low Maintenance free to IS: 14257 for high cranking performance - Battery capacity (Ah) - - No of batteries 1 - TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory Yes - Test Report number and date(Engine) - - Name and address of laboratory(Engine) - - 2/4 Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory Yes - Test Report number and date(Alternator) - - Name and address of laboratory(Alternator) - - DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes - WARRANTY INSTALLATION & COMMISSIONING Warranty 2 Installation & Commissioning Without Installation With Installation, Without Installation Agreed to STC of the Product Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Thakorbhai JashubhaiNaik 394710, DCF North Dangs, Ahwa 1 15

Ceiling Fan

Desktops

Desktops

diesel generators- DG Sets Diesel Generators- DG Sets ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 30 30 No of Phase - Single phase, Three Phase ENGINE Make of Engine - - Model Number of Engine - - Capacity of Engine (cc) - - Engine Power (kWm) - - ISI Marking to IS :10001 for engine false - Type of Engine cooling Liquid Cooled Air Cooled, Liquid Cooled Type of governer Mechanical Mechanical, Electronic Class of governer A1 A0, A1, A2 Number of cylinders (nos) 3 - No of Strokes (nos) 4 - Rated RPM of Engine (RPM) - 1500, 3000 Overload capacity for 10 - 1/4 one hour for every 11 hours continuous running at full load (%) Specific Fuel Consumption (gm/kWh) - - Starting voltage (volt) 12 - ALTERNATOR AC GENERATOR(ALTER NATOR) Make - - AC GENERATOR(ALTER NATOR) model Number - - Rating of AC Generator (KVA) 30 - Power Factor of AC generator 0.8 - Efficiency at rated Power factor at 75% of full Load 88.5 - Compliance of Alternator to IS:13364(part-1) Yes - Type of alternator Brushless - Voltage Regulation Grade VG 1 - Alternator IP Rating IP 23 - Class of Insulation H - CONTROL PANEL Control Panel Manual Manual, AMF IP Rating of Control Panel IP 53 - ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6, 1.8, 2, 1.2 Thickness of Foam 25 - Density of Foam for sound insulation 28 - Noise level at 1 meter (dB) 75 - BATTERY Battery Type & Specification Normal lead acid to IS: 7372 for motor vehicles - Battery capacity (Ah) - - No of batteries 1 - TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory Yes - Test Report number and date(Engine) - - 2/4 Name and address of laboratory(Engine) - - Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory Yes - Test Report number and date(Alternator) - - Name and address of laboratory(Alternator) - - DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes - WARRANTY INSTALLATION & COMMISSIONING Warranty 2 Installation & Commissioning With Installation With Installation, Without Installation Agreed to STC of the Product Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ram Kumar Singh 825401, District Board, Chatra Near DC Office 1 15

geographic information system gis software, geographic information system gis software Geographic Information System Gis Software ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF GEOGRAPHIC INFORMATION SYSTEM SOFTWARE (GOLDEN) Type of platform Desktop based Desktop based, Server Based, Mobile Based, Cloud Based Name of Software ArcGIS Desktop Extensions (Network/3 D/Spatial/Data Interope rability/Geostatistical/D ata Reviewer/Schemati cs/Publisher/Tracking/W orkflow Manager) - Any one extension - Name Of The OEM ESRI - OEM Model/PartNo. 10.5.1 - Product Id of OEM 9973 - Software Version Name 10.5.1 - Date of Launch of Version 30-09-2017 - FEATURES AND FUNCTIONALITY PARAMETERS (GOLDEN) Geocoding capability true Image Exporting capability true Image Management Capability true 1/14 Interoperability capability/OGC true Map Creation capability true Spatial Analysis capability true GPS Tracking capability true Routing and Navigation capability true Customizable development editor true If yes, details of Customizable development editor ArcGIS API for Python, ArcPy, ArcObjects SDK Users Access Control feature true Single Sign On feature true Social Media Integration feature true Third Party Integration feature true Wireless Network Support feature true Installation and Demonstration true No. of days Training Provided at Site 0-5 0-5, 6-10, 11-20 Number of Years upto which Support (Warranty) is available from OEM Franchise online 1 1, 2, 3, 5 FEATURES AND FUNCTIONALITY PARAMETERS (GENERIC) Edit, visualize, manage and analyze geospatial data both in vector and raster data true - 3D Analysis capability true - Census Data Integration true - Labeling capability true - Reverse Geocoding capability true - Georeference imagery capability true - 2/14 Data Import/Export and Synchronization feature true - Data Visualization feature true - Data Management feature true - Drag & Drop Interface feature true - Forcasting feature true - Mobile Integration feature true - Multi-Language feature true - Performance Management feature true - Role-Based Permissions feature true - Search Functionality feature true - Secure Data Storage feature true - Visual Analytics feature true - Web Integration feature true - Widgets/Plug-ins true - If Yes, details of Widgets/Plug-ins Repository - SUPPORTED HARDWARE REQUIREMENTS PARAMETERS Hard Disk Space Required ArcGIS Desktop requires 20 GB for Installation, ArcGIS Desktop Extensions are part of the same deployment - RAM Size required 12 GB - CPU required 2 Core - Operating Systems supported (Driver) Windows - Supported image file formats Supported raster and image data formats (Raster or image data format)- AIRSAR Polarimetric, Applanix DSS, ARC Digitized Raster Graphic (ADRG), ArcSDE raster, ASCII Grid, Band interleaved by line (BIL), band - 3/14 interleaved by pixel (BIP), band sequential (BSQ), Bathymetric Attributed Grid (BAG), Big TIFF, Binary Terrain (BT), Bitmap (BMP), device-independent bitmap (DIB), or Microsoft Windows bitmap, BSB, Chinese Satellite Imagery, Committee on Earth Observing Sensors (CEOS) Synthetic Aperture Radar (SAR), Compressed ARC Digitized Raster Graphics (CADRG), Controlled Image Base (CIB), Digital Geographic Information Exchange Standard (DIGEST) ARC Standard Raster Product (ASRP), UTM/UPS Standard Raster Product (USRP), Digital Image Map (DIMAP), Digital Terrain Elevation Data (DTED) Level 0, 1, and 2, DMCii Satellites, Earth Resources Laboratory Applications Software (ELAS), Enhanced Compressed Raster Graphic (ECRG), Enhanced Compressed Wavelet (ECW), Envisat Image Product (ESAT), ENVI Header Format, EOSAT FAST, ER Mapper, ERDAS 7.5 GIS, ERDAS 7.5 LAN, ERDAS IMAGINE, ERDAS RAW, Esri Grid, Esri Grid stack, Esri Grid stack file, Extensible N- Dimensional Data Format (NDF), File geodatabase raster, Floating point raster file, FORMOSAT-2, GDAL Virtual Format (VRT), GeoEye satellite, Graphic Interchange Format (GIF), Grid 4/14 eXchange File (GXF), GRIB, Golden Software Grid (.grd), Hierarchical Data Format (HDF) 4 & 5, Heightfield raster (HF2), HGT, High Resolution Elevation (HRE), IDRISI Raster (RST), IKONOS satellite, ILWIS Raster Map, Image Display and Analysis (IDA), Image service (from ArcGIS for Server), Image service definition (.ISDef), Image service reference (.ISRef), Integrated System for Imagers and Spectrometers (ISIS), Intergraph raster files: CIT—Binary data; COT—Grayscale data, ISAT, Japanese Aerospace eXploration Agency (JAXA) PALSAR, Joint Photographic Experts Group (JPEG) File Interchange Format (JFIF), JPEG 2000, KOMPSAT-2, Landsat satellites (1–8), LAS (Lidar data files), LAS dataset, Magellan MapSend BLX/XLB format, Match-AT, MAP, Map service (from ArcGIS for Server or ArcGIS.com), Meta Raster Format (MRF), Multi-Resolution Seamless Image Database (MrSID), MrSID (MG4) Lidar, National Imagery Transmission Format (NITF), National Land Archive Production System (NLAPS), New Labelled USGS DOQ (DOQ2), NITF Version 2.1 Commercial Dataset Required Document (NCDRD), NOAA Polar Orbiter Level 1b Data Set (AVHRR), OrbView-3 5/14 satellite, PCI .aux Labelled Raw Format, PCIDSK, Personal geodatabase raster, Planetary Data System (PDS), Pleiades, Portable Network Graphics (PNG), QuickBird satellite, RADARSAT-2 satellite, RapidEye satellite, Raster catalog, Raster process definition (.RPDef), Raster Product Format (RPF), SAGA GIS Binary Grid, Sandia synthetic aperture radar (GFF), Shuttle Radar Topography Mission (SRTM), SOCET SET, Spatial Data Transfer Standard (SDTS) digital elevation model (DEM), SPOT satellites, Tables, Tagged Image File Format (TIFF), Terragen terrain, Terrain, TerraSAR-X, United States Geological Survey (USGS) digital elevation model (DEM), USGS Digital Orthophoto Quadrangles (DOQ), Web coverage service (WCS, OGC standard), Web map service (WMS, WorldView satellites, XPixMap (XPM), Supported databases As an extension to ArcGIS Desktop, they supports databases as supported by the base desktop installation. - Number of Devices Managed Not Applicable - GENERIC PARAMETERS OF GEOGRAPHIC INFORMATION SYSTEM SOFTWARE Free Upgradation to Higher Version within support period YES - Maximum user handling capability 1 license one user - Concurrent user handling capability 1 license one user - 6/14 Valid Licence copy to be provided YES - Type of licensing Users Based - Software supplied through Media - List of items included in the package ArcGIS Desktop Extensions (Network/3 D/Spatial/Data Interope rability/Geostatistical/D ata Reviewer/Schemati cs/Publisher/Tracking/W orkflow Manager) - Any one extension - Hyper link to Data sheet https:/www.esri.com/e n-us/arcgis/products/in dex - No of Softwares sold 1000 - Number of User Referance no. 1 with in Government Department email, phone no.Of concerned authority where Appliance installed 1 - Detail of Government Department email, phone no.Of concerned authority where Appliance installed for above On user request - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jagmohan Sharma 134109, Van Bhawan Sector 6 Plot No C 18 Panchkula 1 15 Geographic Information System Gis Software ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF GEOGRAPHIC INFORMATION SYSTEM SOFTWARE (GOLDEN) Type of platform Desktop based Desktop based, Cloud Based Name of Software ArcGIS Desktop Advanced - 7/14 Name Of The OEM ESRI - OEM Model/PartNo. 10.5.1 - Product Id of OEM 9973 - Software Version Name 10.5.1 - Date of Launch of Version 30-09-2017 - FEATURES AND FUNCTIONALITY PARAMETERS (GOLDEN) Geocoding capability true Image Exporting capability true Image Management Capability true Interoperability capability/OGC true Map Creation capability true Spatial Analysis capability true GPS Tracking capability true Routing and Navigation capability true Customizable development editor true If yes, 11-20 Number of Years upto which Support (Warranty) is available from OEM 1 1, 5 8/14 Franchise online FEATURES AND FUNCTIONALITY PARAMETERS (GENERIC) Edit, manage and analyze geospatial data both in vector and raster data true - 3D Analysis capability true - Census Data Integration true - Labeling capability true - Reverse Geocoding capability true - Georeference imagery capability true - Data Import/Export and Synchronization feature true - Data Visualization feature true - Data Management feature true - Drag & Drop Interface feature true - Forcasting feature true - Mobile Integration feature true - Multi-Language feature true - Performance Management feature true - Role-Based Permissions feature true - Search Functionality feature true - Secure Data Storage feature true - Visual Analytics feature true - Web Integration feature true - Widgets/Plug-ins true - If Yes, details of Widgets/Plug-ins Repository - SUPPORTED HARDWARE REQUIREMENTS PARAMETERS Hard Disk Space Required 20 GB - RAM Size required 12 GB - CPU required 2 Core - 9/14 Operating Systems supported (Driver) Windows - Supported image file formats Supported raster and image data formats (Raster or image data format)- AIRSAR Polarimetric, band interleaved by pixel (BIP), 10/14 Esri Grid stack, Grid eXchange File (GXF), National Imagery 11/14 Transmission Format (NITF), OrbView-3 satellite, Supported databases ALTIBASE, Dameng, IBM Db2, IBM Informix, Microsoft Azure SQL Database, Microsoft - 12/14 SQL Server, Netezza Data Warehouse Appliance, Oracle, PostgreSQL, SAP HANA, SQLite, Teradata Data Warehouse Appliance. Enterprise Geodatabase Supported - BM DB2, Informix, and SQL Server Number of Devices Managed Not Applicable - GENERIC PARAMETERS OF GEOGRAPHIC INFORMATION SYSTEM SOFTWARE Free Upgradation to Higher Version within support period YES - Maximum user handling capability 1 license one user - Concurrent user handling capability 1 license one user - Valid Licence copy to be provided YES - Type of licensing Users Based - Software supplied through Media - List of items included in the package ArcGIS Desktop Advanced - Hyper link to Data sheet https:/www.esri.com/e n-us/store/arcgis- desktop - No of Softwares sold 1000 - Number of User Referance no. 1 with in Government Department email, phone no.Of concerned authority where Appliance installed for above On user request - * Bold specifications are the golden parameters. Consignees and Quantity 13/14 S.No. Consignee Address Quantity Delivery Days 1 Jagmohan Sharma 134109, Van Bhawan Sector 6 Plot No C 18 Panchkula 1 15

Executive Table

Televisions

Notebook Computers-laptop

Human Resource Outsourcing Service

Notebook Computers-laptop Notebook Computers-laptop ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 7 th 7 th Processor Intel Core i5-7200U (upto 3.1 GHz, 3 MB cache, 2 cores) Intel Core i5-7200U (upto 3.1 GHz, 2 cores) Graphics Graphics Type Integrated - Graphics Card Description INTEL - Graphics Memory (GB) INTEGRATED - Memory Type of RAM DDR 4 - RAM Size (GB) 8 8 (or higher) RAM Expandable upto ( in GB) using spare DIMM Slot on Mother Board 32 8, 16, 32, 64, NA RAM Speed (MHz) 2400 - Storage Type of Hard Disk Drive SATA SATA Hard Disk Drive Size( GB) 1000 128, 256, 512, 500, 1000, 2000 Higher is better 1/3 Hard Disk Drive Speed (rpm) 7200 - Operating System Operating System Windows 10 Professional Windows 10 Professional Ports USB 3.0 or higher (No.) 4 - USB Type C Available - VGA Port Available - HDMI Port Available - DISPLAY PORT Available - Thunderbolt Port Not-Available - Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 - Wi-fi Connectivity 802.11 a/b/g/n - Bluetooth 4.0 or higher - Display LCD LED Backlit Display Type Non Touch Touch, Non Touch Display Size (Inch) 15.6 15.6 (or higher) Display Resolution (Pixel) 2304 x 1440 1366 x 768, 1440 x 900, 1920 x 1080, 2304 x 1440, 2560 x 1600, 2736 x 1824, 2880 x 1800, 3200 x 1800, 3840 x 2160 Certification BIS Registration under CRS of Meity Yes - BIS Registration no. - - BEE/Energy Star Certification - - ROHS Compliance Yes - Additional feature Finger Print Reader No - Webcam (HD or Better) Not Avaiable - Miscellaneous Optical Drive Available - Keyboard Backlit - Trusted Platform Module Enabled Yes - Weight (With Battery) (Kg) 3 - Carry Case Included Included, Not Included Power Battery Type (Li-Ion/Li- Polymer) Built-in - Battery Back-up (Hours) 4 - 2/3 Warranty Battery Warranty (Year) 1 1, 3 (or higher) On Site OEM Warranty (Year) 3 1, 3 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shimbhu Dayal Meena 326001, Government P G College Murti Choraha Jhalawar 15 15

library management software Experience with Gov. Required 10 Year (s) Library Management Software ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF LIBRARY MANAGEMENT SOFTWARE(GOLDEN) Name of Software - - Type of Licensing Perpetual Subscription, Perpetual Name of the OEM - - OEM Model/Part No - - Software Description - - Software Version - - Date of Launch of Version - - FEATURES & FUNCTIONALITY PARAMETERS(GOLDEN) Capability to access digital content true true, false Capability to integrate with third party applications false true, false Inbuilt collaboration capability true true, false Barcoding/RFID true true, false Digital libraries Management capability true true, false Deployment options In premises In premises, Cloud No of days Training Upto 5 0, Upto 5, 6 to 10, 11 1/5 Provided at Site to 20, 21 to 30 Number of Years upto which Support is available from OEM/Franchise online 1 1, 2, 3, 5 FEATURES & FUNCTIONALITY PARAMETERS(GENERIC) Z39 50 support false - Automated cloud backup true - Code thirty-nine barcode support false - Mobile platform support true - Acquisition Management true - Barcode Scanning true - Domain Catalog Management true - Circulation Management true - Fee Collection false - Online Public Access Catalog (OPAC) false - Dynamic Location Tagging false - Integration with Barcode Printer true - Integration with Data Capturing unit false - Integration with biometric false - Report Generation true - Role based access false - Department library lending false - Inter-library lending true - Patron Management false - Periodicals Management true - Reserve Shelf Management false - Search Functionality feature false - Self Check-in/Check- Out false - 2/5 Serials Management true - Kiosk integration false - Unicode compliance false - Library master catalog management true - Multiple search interfaces false - Bulletin boards false - Customizable search interfaces true - Filtered search results true - Users master true - Book master true - Vendor master true - Publisher master true - Location master true - Author master false - Stock master false - Issue & return master false - Track due book records true - Book Report true - Over Due Report true - Stock Report true - Book Purchase Report true - Borrowers Report true - User creation feature true - Assign user rights to different persons false - Maintaining different academic years true - Enable/disable users true - Reset password feature true - Indexing capabilty true - Unique Identifier Tagging capability false - Automatic daily backup false - Supported Library Protocols - - SUPPORTED HARDWARE REQUIREMENT Hard Disk Space Required - - 3/5 PARAMETERS RAM Size required - - Server requirements - - CPU required - - Other Hardware requirements - - Operating Systems supported (Driver) - - Supported Devices - - Supported Servers - - Supported Web browsers - - Supported image file formats - - Supported databases - - Min Processor bench mark score required - - Number of Devices Managed - - GENERIC PARAMETERS OF LIBRARY MANAGEMENT SOFTWARE Free updates and upgrades within support period Yes - Maximum user handling capability - - Concurrent user handling capability - - Valid Licence copy to be provided Yes - Software supplied through Media - Installation and Demonstration true - Certifications Benchmarking of Software Products - - List of items included in the package - - Hyper link to Data sheet - - No of Softwares sold 150 - Number of User Referance no 1 with in Government Department email, phone no Of concerned authority where 25 - 4/5 Appliance/Software installed Details of Government Department email, phone no Of concerned authority where Appliance/Software installed for above - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jagdish Prasad 304804, GOVERNMENT P.G COLLEGE NH-12, CISF ROAD, DEOLI 3 15

Security and Protective Software including Antivirus Security And Protective Software Including Antivirus ( 28 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF SECURITY AND PROTECTIVE SOFTWARE INCLUDING ANTIVIRUS (GOLDEN) Sub-Category Stand alone Stand alone Name of the OEM QUICKHEAL - OEM Model/Part No. Antivirus QH Total Security 1User for 1year - Product Id of OEM Antivirus QH Total Security 1User for 1year - Software Version Name Antivirus QH Total Security 1User for 1year - Date of Launch of Version 20.11.2017 - FEATURES AND FUNCTIONALITY PARAMETERS(GOLDEN) Single License for multi-device true true, false Intrusion Detection System (IDS) Intrusion Prevention System (IPS) true true Data Protection true true Cloud Protection true true, false Network Threat Protection true true 1/5 Free Secure Cloud backup space false true, false If Yes, specify the free backup storage space available NA - Installation and Demonstration true true, false No. of days Training Provided at Site upto to 5 0, upto to 5, 6 to 10 Number of Years upto which Support (warranty) is available from OEM Franchise online 1 1 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Anti-Virus true - Anti-Malware true - Anti-Phishing true - Anti-Rootkit true - Anti-Spyware true - Anti-Trojan true - Anti-Worm true - Anti-Spam true - Anti-Adware true - Anti-Ransom ware true - Boot time protection true - Removable Media Scan true - Protection from Browser Exploits true - Incoming and Outgoing Email Protection true - Instant Messaging Protection true - On-Demand Scanning true - On-Access Scanning true - Scheduled Scanning true - Vulnerability Scanning true - Automatically Clean Infected Files true - Scan Compressed File Formats true - Quarantine Feature true - Automatic USB Detection true - 2/5 Registry Start Up Protection true - Browser Protection true - Malicious web page blocking true - Tamper Protection true - Parental Control true - Password Manager true - Heuristics Protection true - Firewall true - Web Protection true - Macro Protection true - Protection from PUA (Potential Unwanted Applications) true - Download Protection true - Behavioural Analysis & Vulnerability Protection true - Band width Management true - Proactive performance alerts true - Social media protection true - Online Identity protection true - Safe guards online transactions true - Network Attack Blocker true - Virus cleanup mode/Virtual sandbox true - System Watcher true - Backup and Restore true - Data Encryption true - Automatic Exploit Prevention true - File Shredder true - Virtual Key Board true - Automatic Updates true - Free 24-hour support true - Unique/Special features, if any TOTAL SECURITY - 3/5 SUPPORT HARDWARE REQUIREMENT PARAMETERS Hard Disk Space Required 1GB - RAM Size required 1GB - Supported Devices (eg. Desktop, Laptop, Tablet, Server, Mobile, etc) DESKTOP, LAPTOP AND ALL IN ONE - Supported Operating Systems (eg. Windows, OS X, Linux, Solaris, Android, iOS, Ubuntu Touch, Windows Phone, etc.). WINDOWS - Number of Devices/Users Managed 1 - GENERIC PARAMETERS OF SECURITY AND PROTECTIVE SOFTWARE INCLUDING ANTIVIRUS Free Upgradation to Higher Version with in support period Yes - Valid Licence copy to be provided Yes - Software supplied through Media & URL Link - AV Test Certified true - Any other Certifications VB/AV - List of items included in the package Product DVD, Manual, 1U Product Key - Hyper link to Data sheet [email protected] m - No of Softwares sold 50 - Number of User Referance no. 1 with in Government Department email, phone no.Of concerned authority where Software/Appliance installed 2 - Details of Government Department email, phone no.Of concerned authority where Software/Appliance installed for above. MTNL, CGST - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/5 1 Vishnu Das Gupta 302005, 301, block A, vitta bhawan. 3rd floor janpath jaipur 28 15

Steel Filing Cabinets Steel Filing Cabinets ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3313 Latest false - Number of Drawer (NOS) 9 9 Label holder Provided false - Drawer suspension Ball bearing Ball bearing, Solid roller, Ball bearing roller, Ball Slide (Not as per IS 3313), Telescopic Slide Lock Provided Provided, Not Provided Locking Mechanism central locking machanism central locking machanism, cylinder locking, Dual Control Key lock of min. 6 levers, 3 Wheel combination lock, Electronic Combination Lock, Dual Control Key lock of min. 6 levers with 3 Wheel combination lock, Dual Control Key lock of min. 6 levers with Electronic Combination Lock 1/3 Movable with Wheels at bottom false true, false Type of Wheel No Wheels - Loading Capacity of drawer in KG (+/- 2 Kg) 40 As per GeM Catalogue. Higher is better MATERIAL Sheet Thickness of Side, Back, Top and bottom in mm (+/- 5%) 0.5 As per GeM Catalogue. Higher is better Sheet Thickness of Filing Drawer in mm (+/- 5%) 0.5 As per GeM Catalogue. Higher is better Clutch compressor strip or Cradle strip made of steel sheet of 1 mm thickness( min) made of steel sheet of 1 mm thickness( min), Aluminium, Galvanized steel, MS Sheet (Not as per IS 3313) Material of wheel N.A - DIMENSION Overall Height ±10(mm) 350 As per GeM Catalogue. Width ±10 (mm) 350 As per GeM Catalogue. Depth ±10(mm) 300 As per GeM Catalogue. Height of smallest Drawer ±10(mm) ALL DRAWERS EQUAL 50 mm, 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, ALL DRAWERS EQUAL, N.A Height of medium Drawer ±10(mm) ALL DRAWERS EQUAL 125 mm, 225 mm, 250 mm, N.A Height of largest Drawer ± 10(mm) N.A 250 mm, 275 mm, 300 mm, 350 mm, 400 mm, 425 mm, 450 mm, 500 mm, N.A, 320 mm Size of Wheel (Dia) ±2 mm 100 mm dia - COLOUR & FINISH Colour of Paint gray - Finish powder coated Synthetic enamel, powder coated, chrome, epoxy polyester, polished Packing: Gutta packing - CERTIFICATION ISI marked false - 2/3 Check Positive stop to prevent inadverted movement and rebound - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Suraj Singh 494111, Government Polytechnic Sukma, Kumharras, District Sukma, Chhattisgarh 10 15

trolleys or accessories Average Turn Over of Last 3 Years 4 Lakh (s) Experience with Gov. Required 5 Year (s) Trolleys Or Accessories ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Performance Parameters Type of Trolley General purpose Trolleys Sack Trolley, Multipurpose Platform Trolleys, General purpose Trolleys Types of General purpose Trolleys ( Otherwise say NA for Sack Trolley or Multi purpose Platform Trolleys) NA - Loading capacity (Minimum) (Kgs) 150 Weight of Trolley (Kgs) 35 Suitable for entry into Lift true true, false Ground Clearance in mm 750 - Handle Yes - No of Cart/Shelf/Rack/Tabl 1 1, 2, 3, 4, NA 1/4 e (for general purpose trolley otherwise put NA for other Trolleys) Nature of Movement of Trolley Manual Manual, Motorised If motorized, give details of mechanism like motor hp, rpm etc - - Powder Coating on metallic frame Yes - Side Railing NA - Wheel material Solid Rubber tyres - No. of wheel 4 (For Multipurpose Trolley) - Wheel Size (mm) 150 - Type of Wheel movement Swivel castors Fixed, Swivel castors, Front fixed &amp; Rear Swivel Castors Foot Brake facilities true true, false Yes is better Finishing of surface edge Free from sharp edges and rounded edge/corner - Surrounding Rubberised Bumper false - Paint Each trolley shall be free of rust and shall be aesthetically painted/Powder coated. - Foldability false - Environment use of operation of Trolley Non Corrosive Environmental use Corrosive environmental use, Non Corrosive Environmental use Warranty (years) 1 1, 4 Dimensional and Material Parametrs " Overall Size of Trolley (L x W x H) (mm x mm x mm)" - - Material of frame MS - Size of Toe Plate (Length x Width) (mm x mm) (Applicable for Sack trolley otherwise put NA for other Trolleys) - - Mtetrial of Platform MS - 2/4 surface plate for Platfam Trolley otherwise put NA for other Trolleys) Thickness of Platform surface plate in mm - - Size of Cart/Shelf/Rack/Table in (L x W x T) (mm x mm x mm) (for general purpose trolley otherwise put NA for other Trolleys) - - Thickness of sheet for General Purpose trolley - - Material of sheet for Racks for General Purpose trolley trolley - - Thickness of side railing if provided in Trolleys 0 - Thickness of cart/rack/shelf/table 1.2 - Reports Availability of test certificate from Government/NABL ILAC accredited lab to prove conformity of specifications No Yes, No Test Report No and Date - - Name of the Lab - - Address of the Lab - - Copy of the Certificate to be provided to buyer by the seller at the time of supplies (Applicable if availability of test report indicated as YES, otherwise put NA) NA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Gagandeep Singh Dhillon 171001, KNH Shimla 10 15 3/4

Business intelligence and data analysis software, Bu Average Turn Over of Last 3 Years 500 Lakh (s) Experience with Gov. Required 3 Year (s) Business Intelligence And Data Analysis Software ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF BUSINESS INTELLIGENCE AND DATA ANALYSIS SOFTWARE(GOLDEN) Name of Software SAS Data Management Server - Standard - Name of the OEM SAS - OEM Model/Part No. SASNDMSS - Product Id of OEM SASNDMSS - Software Description SAS Data Management Standard is SAS next generation offering of the Enterprise Data Integration Server One development environment. Manage processes with an intuitive, role-based GUI that offers drag- and-drop functionality, source system access and a customizable metadata tree. - Software Version Name 2.7M1 over 9.4M5 - 1/28 Date of Launch of Version 2.7M1 over 9.4M5 - FEATURES AND FUNCTIONALITY PARAMETERS (GOLDEN) Budgeting & Forecasting false Operational Research Capability false Statistical Capability true Text Analytics false Fraud analytics false Architecture aware in memory multiple data source support meta data management features true Support Data Connectors true If yes, type of support data connectors Multiple databases Predictive Analytics false Single Sign On true Product updates true Deployment options In premises In premises, On cloud, Both Installation and Demonstration false No. of days Training Provided at Site 0 0, Upto 5, 6 to 10 Number of Years upto which Support (warranty) is available from OEM Franchise online 1 1, 2, 3 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Master Data Management true - Data Governance true - Application Security true - Authentication & Security true - Collaboration Analytics false - Customizable Fields true - Customizable Reporting false - Dashboard Creation false - 2/28 Data Storage Management true - Interactive Content true - Interactive Reporting false - Mobile Integration false - Supports OLAP (Online Analytical Processing) functions false - Real Time Analytics true - Social Media Analytics true - Visual Analytics false - Geospatial support features false - Automatic date dimension features true - Intuitive interface custom charting features false - Activity Dashboard true - Access Control true - API true - Ad hoc Analysis false - Ad hoc Query/Data Query true - Ad hoc Reporting false - Alerts & Intelligence false - Categorizing/Hierarchy true - Content Analytics false - Conversion Analytics false - Version Control true - Cross-device data true - Data Extraction true - Data Filtering true - Data Analysis true - Data Visualization false - Data Import/Export true - Drag & Drop Interface true - Data Manipulation true - Graphical Data Presentation false - 3/28 Metadata Management true - Supports Multiple Data Sources true - Performance Reporting Monitoring false - Permission Management true - Product Integrations true - Trend Tracking Problem indication and Analysis false - Widgets No - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Minimum Hard Disk Space Required Based on sizing - RAM Size required Based on sizing - Server requirements Based on sizing - CPU required 4 core - Operating Systems supported Mutliple Operating Systems Supported - Supported Devices Multiple devices supported - Supported Servers Multiple servers supported - Supported Web browsers Multiple supported web browsers - Supported Database Multiple database supported - GENERIC PARAMETERS OF BUSINESS INTELLIGENCE AND DATA ANALYSIS SOFTWARE Free Upgradation to Higher Version Yes - Valid Licence copy to be provided Yes - Software supplied through URL Link - Certifications Benchmarking of Software Products No - Hyper link to Data sheet https:/www.sas.com/co ntent/dam/SAS/en_us/d oc/factsheet/sas-data- management-102451.p df - No of Softwares sold 50 - Details of Government Department email, phone no.Of concerned To be provided on request - 4/28 authority where Software/Appliance installed for above. * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kumar Saurabh Raj 147001, Bhupindra Road, Patiala 2 15 Business Intelligence And Data Analysis Software ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF BUSINESS INTELLIGENCE AND DATA ANALYSIS SOFTWARE(GOLDEN) Name of Software SAS Analytics Add-on - OR - Name of the OEM SAS - OEM Model/Part No. SASNAADDOR - Product Id of OEM SASNAADDOR - Software Description SAS/OR software provides a powerful array of optimization, simulation and project ..SAS/OR is designed for people in any industry with operations research . - Software Version Name SAS/OR 14.3 - Date of Launch of Version 2012 - FEATURES AND FUNCTIONALITY PARAMETERS (GOLDEN) Budgeting & Forecasting false Operational Research Capability true Statistical Capability true Text Analytics false Fraud analytics false Architecture aware in memory multiple data source support meta data management features true 5/28 Support Data Connectors true If yes, 3 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Master Data Management true - Data Governance true - Application Security true - Authentication & Security true - Collaboration Analytics false - Customizable Fields false - Customizable Reporting false - Dashboard Creation true - Data Storage Management false - Interactive Content true - Interactive Reporting false - Mobile Integration false - Supports OLAP (Online Analytical Processing) functions true - Real Time Analytics true - Social Media Analytics false - Visual Analytics false - Geospatial support features false - Automatic date false - 6/28 dimension features Intuitive interface custom charting features false - Activity Dashboard true - Access Control true - API true - Ad hoc Analysis true - Ad hoc Query/Data Query true - Ad hoc Reporting false - Alerts & Intelligence false - Categorizing/Hierarchy false - Content Analytics false - Conversion Analytics false - Version Control true - Cross-device data false - Data Extraction false - Data Filtering false - Data Analysis true - Data Visualization true - Data Import/Export true - Drag & Drop Interface false - Data Manipulation true - Graphical Data Presentation true - Metadata Management true - Supports Multiple Data Sources false - Performance Reporting Monitoring false - Permission Management false - Product Integrations false - Trend Tracking Problem indication and Analysis true - Widgets NA - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Minimum Hard Disk Space Required Based on sizing - RAM Size required Based on sizing - 7/28 Server requirements Based on sizing - CPU required 4 core - Operating Systems supported Multiple Operating Systems Supported - Supported Devices Multiple devices supported - Supported Servers Multiple servers supported - Supported Web browsers Multiple supported web browsers - Supported Database Multiple database supported - GENERIC PARAMETERS OF BUSINESS INTELLIGENCE AND DATA ANALYSIS SOFTWARE Free Upgradation to Higher Version Yes - Valid Licence copy to be provided Yes - Software supplied through URL Link - Certifications Benchmarking of Software Products NA - Hyper link to Data sheet https:/www.sas.com/co ntent/dam/SAS/en_us/d oc/factsheet/or-101429 .pdf - No of Softwares sold 100 - Number of User Referance no. 1 with in Government Department email, phone no.Of concerned authority where Software/Appliance installed 5 - Details of Government Department email, phone no.Of concerned authority where Software/Appliance installed for above. Available on request - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kumar Saurabh Raj 147001, Patiala 1 15 8/28 Business Intelligence And Data Analysis Software ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF BUSINESS INTELLIGENCE AND DATA ANALYSIS SOFTWARE(GOLDEN) Name of Software SAS Add-on - SAS/Access - Name of the OEM SAS - OEM Model/Part No. SASNAADDAC - Product Id of OEM SASNAADDAC - Software Description SAS/ACCESS interfaces provide data access to more of your data sources so you can make better decisions faster - Software Version Name SAS/ACCESS 9.4 - Date of Launch of Version 2012 - FEATURES AND FUNCTIONALITY PARAMETERS (GOLDEN) Budgeting & Forecasting false Operational Research Capability false Statistical Capability false Text Analytics false Fraud analytics false Architecture aware in memory multiple data source support meta data management features false Support Data Connectors true If yes, type of support data connectors Multiple databases Predictive Analytics false Single Sign On false Product updates true Deployment options In premises In premises, Both Installation and Demonstration false 9/28 No. of days Training Provided at Site 0 0, 3 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Master Data Management false - Data Governance false - Application Security true - Authentication & Security true - Collaboration Analytics true - Customizable Fields true - Customizable Reporting false - Dashboard Creation false - Data Storage Management true - Interactive Content false - Interactive Reporting false - Mobile Integration false - Supports OLAP (Online Analytical Processing) functions true - Real Time Analytics false - Social Media Analytics false - Visual Analytics false - Geospatial support features false - Automatic date dimension features false - Intuitive interface custom charting features false - Activity Dashboard false - Access Control true - API false - Ad hoc Analysis false - Ad hoc Query/Data Query true - Ad hoc Reporting false - 10/28 Alerts & Intelligence false - Categorizing/Hierarchy false - Content Analytics false - Conversion Analytics false - Version Control false - Cross-device data true - Data Extraction true - Data Filtering true - Data Analysis false - Data Visualization false - Data Import/Export true - Drag & Drop Interface false - Data Manipulation false - Graphical Data Presentation false - Metadata Management true - Supports Multiple Data Sources false - Performance Reporting Monitoring false - Permission Management false - Product Integrations false - Widgets NA - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Minimum Hard Disk Space Required Based on sizing - RAM Size required Based on sizing - Server requirements Based on sizing - CPU required 4 core - Operating Systems supported Multiple Operating Systems Supported - Supported Devices Multiple devices supported - Supported Servers Multiple servers supported - Supported Web browsers Multiple supported web browsers - Supported Database Multiple database supported - GENERIC PARAMETERS OF BUSINESS INTELLIGENCE AND Free Upgradation to Higher Version Yes - 11/28 DATA ANALYSIS SOFTWARE Valid Licence copy to be provided Yes - Software supplied through URL Link - Certifications Benchmarking of Software Products NA - Hyper link to Data sheet https:/www.sas.com/co ntent/dam/SAS/en_us/d oc/factsheet/sas- access-103392.pdf - No of Softwares sold 500 - Number of User Referance no. 1 with in Government Department email, phone no.Of concerned authority where Software/Appliance installed 10 - Details of Government Department email, Patiala 2 15 Business Intelligence And Data Analysis Software ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF BUSINESS INTELLIGENCE AND DATA ANALYSIS SOFTWARE(GOLDEN) Name of Software SAS Enterprise Miner - Name of the OEM SAS - OEM Model/Part No. SASNEM - Product Id of OEM SASNEM - Software Description It streamlines the data mining process so you can create accurate predictive and - 12/28 descriptive analytical models using vast amounts of data. Software Version Name 14.3 over 9.4M5 - Date of Launch of Version 14.3 over 9.4M5 - FEATURES AND FUNCTIONALITY PARAMETERS (GOLDEN) Budgeting & Forecasting true Operational Research Capability false Statistical Capability true Text Analytics true Fraud analytics true Architecture aware in memory multiple data source support meta data management features true Support Data Connectors true If yes, type of support data connectors Multiple databases Predictive Analytics true Single Sign On true Product updates true Deployment options In premises In premises, 3 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Master Data Management true - Data Governance true - Application Security true - Authentication & Security false - 13/28 Collaboration Analytics true - Customizable Fields true - Customizable Reporting false - Dashboard Creation false - Data Storage Management true - Interactive Content true - Interactive Reporting true - Mobile Integration false - Supports OLAP (Online Analytical Processing) functions false - Real Time Analytics false - Social Media Analytics false - Visual Analytics false - Geospatial support features false - Automatic date dimension features true - Intuitive interface custom charting features false - Activity Dashboard true - Access Control true - API true - Ad hoc Analysis true - Ad hoc Query/Data Query true - Ad hoc Reporting false - Alerts & Intelligence false - Categorizing/Hierarchy true - Content Analytics true - Conversion Analytics true - Version Control true - Cross-device data false - Data Extraction true - Data Filtering true - Data Analysis true - Data Visualization true - Data Import/Export true - 14/28 Drag & Drop Interface true - Data Manipulation true - Graphical Data Presentation true - Metadata Management true - Supports Multiple Data Sources true - Performance Reporting Monitoring true - Permission Management false - Product Integrations true - Trend Tracking Problem indication and Analysis true - Widgets NA - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Minimum Hard Disk Space Required Based on sizing - RAM Size required Based on sizing - Server requirements Based on sizing - CPU required 4 core - Operating Systems supported Multiple Operating Systems Supported - Supported Devices Multiple devices supported - Supported Servers Multiple servers supported - Supported Web browsers Multiple supported web browsers - Supported Database Multiple database supported - GENERIC PARAMETERS OF BUSINESS INTELLIGENCE AND DATA ANALYSIS SOFTWARE Free Upgradation to Higher Version Yes - Valid Licence copy to be provided Yes - Software supplied through URL Link - Certifications Benchmarking of Software Products NA - Hyper link to Data sheet https:/www.sas.com/co ntent/dam/SAS/en_us/d oc/factsheet/sas-enterp rise-miner-101369.pdf - 15/28 No of Softwares sold 500 - Number of User Referance no. 1 with in Government Department email, Patiala 1 15 Business Intelligence And Data Analysis Software ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF BUSINESS INTELLIGENCE AND DATA ANALYSIS SOFTWARE(GOLDEN) Name of Software Platform Suite for SAS - Name of the OEM SAS - OEM Model/Part No. SASNPS - Product Id of OEM SASNPS - Software Description Platform Suite for SAS addresses the challenges of scheduling and automating your SAS workload - Software Version Name Platform suite for sas 9.4 - Date of Launch of Version NA - FEATURES AND FUNCTIONALITY PARAMETERS (GOLDEN) Budgeting & Forecasting false Operational Research Capability false 16/28 Statistical Capability false Text Analytics false Fraud analytics false Architecture aware in memory multiple data source support meta data management features false Support Data Connectors false If yes, type of support data connectors NA Predictive Analytics false Single Sign On false Product updates true Deployment options In premises In premises, 3 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Master Data Management false - Data Governance false - Application Security false - Authentication & Security false - Collaboration Analytics false - Customizable Fields false - Customizable Reporting false - Dashboard Creation false - Data Storage Management false - Interactive Content false - Interactive Reporting false - Mobile Integration false - Supports OLAP (Online false - 17/28 Analytical Processing) functions Real Time Analytics false - Social Media Analytics false - Visual Analytics false - Geospatial support features false - Automatic date dimension features false - Intuitive interface custom charting features false - Activity Dashboard false - Access Control false - API false - Ad hoc Analysis false - Ad hoc Query/Data Query false - Ad hoc Reporting false - Alerts & Intelligence false - Categorizing/Hierarchy false - Content Analytics false - Conversion Analytics false - Version Control false - Cross-device data false - Data Extraction false - Data Filtering false - Data Analysis false - Data Visualization false - Data Import/Export false - Drag & Drop Interface false - Data Manipulation false - Graphical Data Presentation false - Metadata Management false - Supports Multiple Data Sources false - Performance Reporting Monitoring false - Permission Management false - 18/28 Product Integrations false - Trend Tracking Problem indication and Analysis false - Widgets NA - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Minimum Hard Disk Space Required NA - RAM Size required NA - Server requirements NA - CPU required 4 core - Operating Systems supported NA - Supported Devices NA - Supported Servers NA - Supported Web browsers NA - Supported Database NA - GENERIC PARAMETERS OF BUSINESS INTELLIGENCE AND DATA ANALYSIS SOFTWARE Free Upgradation to Higher Version Yes - Valid Licence copy to be provided Yes - Software supplied through URL Link - Certifications Benchmarking of Software Products NA - Hyper link to Data sheet NA - No of Softwares sold 10 - Number of User Referance no. 1 with in Government Department email, phone no.Of concerned authority where Software/Appliance installed 3 - Details of Government Department email, phone no.Of concerned authority where Software/Appliance installed for above. Available on request - * Bold specifications are the golden parameters. Consignees and Quantity 19/28 S.No. Consignee Address Quantity Delivery Days 1 Kumar Saurabh Raj 147001, Patiala 2 15 Business Intelligence And Data Analysis Software ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF BUSINESS INTELLIGENCE AND DATA ANALYSIS SOFTWARE(GOLDEN) Name of Software SAS Visual Analytics - Name of the OEM SAS - OEM Model/Part No. SASNVA - Product Id of OEM SASNVA - Software Description SAS Visual Analytics allows organizations to visually explore data quickly. It combines analytically-based data visualization and discovery with robust reporting designed for information sharing, mobile BI and collaboration. - Software Version Name 7.4 over 9.4M5 - Date of Launch of Version 2012 - FEATURES AND FUNCTIONALITY PARAMETERS (GOLDEN) Budgeting & Forecasting false Operational Research Capability false Statistical Capability true Text Analytics true Fraud analytics false Architecture aware in memory multiple data source support meta data management features true Support Data Connectors true If yes, type of support data connectors Multiple databases 20/28 Predictive Analytics false Single Sign On true Product updates true Deployment options In premises In premises, 3 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Master Data Management true - Data Governance true - Application Security true - Authentication & Security true - Collaboration Analytics true - Customizable Fields true - Customizable Reporting true - Dashboard Creation true - Data Storage Management true - Interactive Content true - Interactive Reporting true - Mobile Integration true - Supports OLAP (Online Analytical Processing) functions true - Real Time Analytics true - Social Media Analytics true - Visual Analytics true - Geospatial support features true - Automatic date dimension features true - Intuitive interface custom charting features true - Activity Dashboard true - 21/28 Access Control true - API true - Ad hoc Analysis true - Ad hoc Query/Data Query true - Ad hoc Reporting true - Alerts & Intelligence true - Categorizing/Hierarchy true - Content Analytics true - Conversion Analytics false - Version Control true - Cross-device data false - Data Extraction true - Data Filtering true - Data Analysis true - Data Visualization true - Data Import/Export true - Drag & Drop Interface true - Data Manipulation true - Graphical Data Presentation true - Metadata Management true - Supports Multiple Data Sources true - Performance Reporting Monitoring true - Permission Management true - Product Integrations true - Trend Tracking Problem indication and Analysis true - Widgets NA - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Minimum Hard Disk Space Required Based on sizing - RAM Size required Based on sizing - Server requirements Based on sizing - CPU required 16 core - Operating Systems supported Multiple Operating Systems Supported - 22/28 Supported Devices Multiple devices supported - Supported Servers Multiple servers supported - Supported Web browsers Multiple supported web browsers - Supported Database Multiple database supported - GENERIC PARAMETERS OF BUSINESS INTELLIGENCE AND DATA ANALYSIS SOFTWARE Free Upgradation to Higher Version Yes - Valid Licence copy to be provided Yes - Software supplied through URL Link - Certifications Benchmarking of Software Products NA - Hyper link to Data sheet https:/www.sas.com/co ntent/dam/SAS/en_us/d oc/factsheet/sas-visual- analytics-105682.pdf - No of Softwares sold 100 - Number of User Referance no. 1 with in Government Department email, Patiala 1 15 Business Intelligence And Data Analysis Software ( 10 ) 23/28 Technical Specifications Specification Specification Name Values Allowed Values BASIC INFORMATION OF BUSINESS INTELLIGENCE AND DATA ANALYSIS SOFTWARE(GOLDEN) Name of Software SAS Enterprise Guide - Name of the OEM SAS - OEM Model/Part No. SASNEG - Product Id of OEM SASNEG - Software Description SAS Enterprise Guide is a powerful Windows client application that provides a guided mechanism to exploit the power of SAS and easily deploy the results. - Software Version Name SAS Enterprise Guide 7.1 - Date of Launch of Version 2012 - FEATURES AND FUNCTIONALITY PARAMETERS (GOLDEN) Budgeting & Forecasting true Operational Research Capability false Statistical Capability true Text Analytics true Fraud analytics true Architecture aware in memory multiple data source support meta data management features true Support Data Connectors true If yes, 6 to 10 24/28 Number of Years upto which Support (warranty) is available from OEM Franchise online 1 1, 3 FEATURES AND FUNCTIONALITY PARAMETERS(GENERIC) Master Data Management true - Data Governance true - Application Security true - Authentication & Security false - Collaboration Analytics true - Customizable Fields true - Customizable Reporting true - Dashboard Creation true - Data Storage Management true - Interactive Content true - Interactive Reporting true - Mobile Integration false - Supports OLAP (Online Analytical Processing) functions true - Real Time Analytics false - Social Media Analytics false - Visual Analytics false - Geospatial support features false - Automatic date dimension features true - Intuitive interface custom charting features false - Activity Dashboard true - Access Control true - API false - Ad hoc Analysis true - Ad hoc Query/Data Query true - Ad hoc Reporting true - Alerts & Intelligence false - Categorizing/Hierarchy true - 25/28 Content Analytics false - Conversion Analytics false - Version Control true - Cross-device data false - Data Extraction true - Data Filtering true - Data Analysis true - Data Visualization true - Data Import/Export true - Drag & Drop Interface true - Data Manipulation true - Graphical Data Presentation true - Metadata Management false - Supports Multiple Data Sources true - Performance Reporting Monitoring true - Permission Management true - Product Integrations true - Trend Tracking Problem indication and Analysis true - Widgets NA - SUPPORTED HARDWARE REQUIREMENT PARAMETERS Minimum Hard Disk Space Required Based on sizing - RAM Size required Based on sizing - Server requirements Based on sizing - CPU required Desktop user - Operating Systems supported Multiple Operating Systems Supported - Supported Devices Multiple devices supported - Supported Servers Multiple servers supported - Supported Web browsers Multiple supported web browsers - Supported Database Multiple database supported - GENERIC PARAMETERS OF BUSINESS Free Upgradation to Higher Version Yes - 26/28 INTELLIGENCE AND DATA ANALYSIS SOFTWARE Valid Licence copy to be provided Yes - Software supplied through URL Link - Certifications Benchmarking of Software Products NA - Hyper link to Data sheet https:/www.sas.com/st orefront/aux/en/spstate g/57255_excerpt.pdf - No of Softwares sold 500 - Number of User Referance no. 1 with in Government Department email, Patiala 10 15

revolving chair Revolving Chair ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type push back push back, height adjustable Backrest is made of two pcs injection Backrest is made of one piece injection - 1/5 moulded frame moulded frame backrest has separate adjustable headrest false Seat type fixed fixed, sliding Seat is curved false - Locking mechanism false - Type of locking N.A - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon 2/5 Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 40 - Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram - 3/5 DIMENSION Overall Chair Height ±15mm 1220 As per GeM Catalogue. Backrest Height ±15mm 730 As per GeM Catalogue. Backrest Width ±10mm 480 410, 440, 480, 500, 520, 5 50, 650, 680, 700, 720 Seat Height ±15 mm 500 420, 450, 520 Seat Width ±10 mm 500 440, 550, 4 60 Seat Depth ±10 mm 500 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 1 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 50 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO NO YES, NO 4/5 18001:2007 certified Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ravi Kumar Dadheech 306401, College Rd, Indira Colony Vistar, Pali, Rajasthan 306401 20 15

Compatible Cartridge

Drinking Water Cooler Drinking Water Cooler ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/ENERGY TYPE Storage - Cooling Capacity Litres/Hour 60Liters/hour 40 Liters/hour, 60Liters/hour, 150 Liters/hour Storage Capacity 120 40, 80, 120, 150 Maximum Energy Consumption (Watt) 775 Watt for 60 ltr/hr cooling cap. - Power Factor 0.85 - CERTIFICATION Conformity to Indian standard IS: 1475 latest - ISI MARKED Yes - Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification true - Specification Specification Name Values Allowed Values GENERIC Eco-Friendly (Non CFC Refrigerant) Yes - 1/2 Water Tank sheet material and thickness Stainless Steel (Grade AISI 304), thickness > =0.8 mm - Water Tank cover and lid bottom Sheet material Al. sheet - Water Tank cover and lid bottom Sheet Thickness 1.5 - Cooler Cabinet sheet material Stainless Steel (Grade AISI 304) - Cooler Cabinet sheet thickness 0.8 - Warranty on Machine 1 1, 2, 3 Higher is better Warranty on Compressor 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lal Chand Bohra 332713, Sita Ram Modi Govt. Sanskrit College Chaoni Neem-Ka-Thane Distt., Sikar, Rajasthan 1 15

domestic refrigerators Domestic Refrigerators ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standrad IS:15750(2006) for Frost Free IS:1476 latest for Direct Cool, IS:15750(2006) for Frost Free ISI marked false - CML No. 0 - Capacity and Design features Storage Volume(NET CAPACITY) (Litres) 300 As per GeM Catalogue. Type of Door Double Single, Double Insulation others Puff, Polyurethane, Maxi 2, others Built in Voltage Stabilizer Yes - Method of Defrosting Frost Free Direct Cool, Frost Free Performance BEE Star Rating as on date 3 2, 3, 4, 5 Eco-friendly refrigerant yes - Compressor Power saver Compressor - Voltage Range at 43 degree Centigrade (Volts) 230 (tolerance 10%) - Material Coil Material Copper (Cu) Copper (Cu), 1/2 Aluminium (Al) Finish and Colour Type of Finish Metallic Metallic, Matt, Printed Design Colour Silver As per GeM Catalogue. * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lal Chand Bohra 332713, Sita Ram Modi Govt. Sanskrit College Chaoni Neem-Ka-Thane Distt., Sikar, Rajasthan 1 15

Desktops Desktops ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 6th 6th, 7th, 8th Processor Intel Core i5-6500 (3.2 GHz, 6 MB Cache, 4 Cores) Intel Core i5-6400 (2.7 GHz, 4 Cores), Intel Core i5-8600K (3.6 GHz, 9 MB Cache, 6 Cores), Intel Core i5-8500 (3.0 GHz, Intel Core i5-8400 (2.8 GHz, Intel Core i5-7600T (2.8 GHz, Intel Core i5-7600K (3.8 GHz, Intel Core i5-7600 (3.5 GHz, Intel Core i5-7500T (2.7 GHz, Intel Core i5-7500 (3.4 GHz, Intel Core i5-7400T (2.4 GHz, 1/4 Intel Core i5-7400 (3.0 GHz, Intel Core i5-6500 (3.2 GHz, Intel Core i5-6600 (3.3 GHz, 4 Cores) Motherboard Chipset Intel H110 As per GeM Catalogue. Expansion Slots (PCIe x 1) (Number) 1 - Expansion Slots (PCIe x 4) (Number) 0 - Expansion Slots (PCIe x 16) (Number) 1 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre-Loaded) Windows 10 Professional Windows 10 Professional RAM Type of RAM DDR 4 - RAM Size (GB) 4 4, 8, 16, 32 (or higher) RAM Expandability upto (GB) 32 16, 32, 64 (or higher) RAM Speed (MHz) 2400 - Storage Hard Disk (GB) 1000 500, 1000, 2000 (or higher) Cabinet Cabinet Tower - Cabinet Volume (Litres) - - Internal Bays 1 - External Bays (Number) 1 - DIMM Slots (Number) 2 - Connectivity Wireless NA - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 4 - USB Port 3.0 (Number) 4 - Serial Port false - Parallel Port false - VGA true - HDMI true - Display Port false - Monitor Monitor Size 18.5 18.5 2/4 (INCHES) (or higher) Monitor Resolution (PIXELS) 1366x768 1366x768, 1920x1080, 3200x1800, 3840 x 2160, 1440 x 900, 1600 x 900 Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive DVD R/W - Internal Speaker false - On Site OEM Warranty (Year) 3 3, 5 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 MAYA RAM TOMAR 110002, GLNS Complex, Delhi Gate 10 15

Kadhai

PAN WITH IRON HANDLE/CHAPATI TAWA (Handel Cover with wood)/DOSA TAWA PAN WITH IRON HANDLE/CHAPATI TAWA (Handel Cover With Wood)/DOSA TAWA ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Item Type of Tawa Chapati Chapati, Dosa Type of handle With With, Without Material Material of Pan/Tawa Anodised Aluminium Iron(Mild Steel), Alumini um, Anodised Aluminium, Non Stick Pan Material of Handle Stainless Steel 304 Iron, Aluminium, Stainles s Steel 304, NA Handle Cover Material NA Wooden, Bakelite, NA Construction Shape of Pan/Tawa Curved Round Flat Round, Curved Round, Rectangular Base Fixing of Handle Rivietted Welded, Screwed, Riviett ed, NA Dimension Diameter of Pan/Tawa(Round) in mm 250 As per GeM Catalogue. Length of rectangular Tawa NA for round Shape 200, 250, 300, 350, 400, 4 50, 500, 550, 600, NA for round Shape Width of rectangular NA for round Shape 200, 4 1/3 Tawa 50, NA for round Shape Thickness of Pan/Tawa (mm) 4 As per GeM Catalogue. Depth of Pan/Tawa (mm) 10 As per GeM Catalogue. Length of Handle (mm) 200 As per GeM Catalogue. Length of Handle Cover (mm) NA As per GeM Catalogue. Weight of Complete Pan/Tawa (Kg) 1 As per GeM Catalogue. * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anil Kumar N 131305, BHAGAT PHOOL SINGH MAHILA VISHWAVIDYALAYA, KHANPUR KALAN 10 15

Domestic Gas Stove LPG

flying insect control traps- fly catcher Flying Insect Control Traps- Fly Catcher ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Material Material of Shield which protects users from shock Any Other plastic, Any Other Body Material Iron Operating Parameters Operating Voltage (Volt) 220 - Frequency (Hz) 50 - Grid Voltage 220 - Total Power Consumption (Watt) 80 Effective Room Area for which machine is suitable 300-400 300-400sqft, 300-400, 2 50sqft, 250-300, 250 Volume of the Mosquito Killing Chamber 1 Lamp Details Type of Lamp Fluoroscent Number of Lamps 2 2 Lamp Wattage (Watt) 40 Physical Characteristics Shape Rectangular - Mounting Wall - 1/2 Cleaing Arrangement Catchment Tray - Killing System Electrical &amp; Grid Charge - Duty Cycle continious - Warranty (Year) 1 1 Detail of Technology mosphet ic depend - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 uma shanker shrivastava 325220, ADMN. BUILDING, SHAKTI PARISAR, CTPP, MOTIPURA, TELSIL- CHHABRA, DISTT. BARAN, RAJASTHAN-325220 3 30

almirah- Steel Almirah- Steel ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest false - No of shelves (Nos) 4 - Type of Shelves Fixed - Locker Provided false - Locking System with the locker NO - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 3 - Number of Glass Sheet fixed in each Almirah door (Nos) N.A - Construction Welded - Lock Three Way bolting device controlled by 6 lever lock - MATERIAL Material M.S sheet conforming M.S sheet conforming 1/4 to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker N.A - Length of Glass Sheet ±10 (mm) N.A - Width of Glass Sheet ±10 (mm) N.A - Sheet Thickness of door in mm 1.0 mm - Sheet Thickness of sides, back, Top and Bottom 1.0 mm - Sheet Thickness of Shelves 1.0 mm - Sheet Thickness of Pedestal in mm 1.0 mm - Material of Lock Brass and steel finish - Material of Keys steel - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1800 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1 450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 480 430, 455, 480, 486, 270, 3 70, 400 Inside Height of Locker in mm (± 5 mm) N.A - Inside Width of Locker i mm (±5 mm) N.A - Inside Depth of Locker in mm (±5 mm) N.A - 2/4 Width of Stiffner in mm (±5 mm) 155 mm - Thickness of MS Sheet of Stiffner (in mm) 0.9 mm - Stiffened Pedestal height in mm (±2 mm) 125 - Pedestal Width in mm (±2 mm) 75 - COLOUR & FINISH Finish Stove Ennamel Paint - Colour of Paint dark gray - Packing: Corrogeted Paper Packing - CERTIFICATION ISI marked false - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Minakshi Jain 303702, MORIJA ROAD, BEHIND POWER HOUSE, CHOMU 20 15

Portable Fire Extinguishers IS 15683 Portable Fire Extinguishers IS 15683 ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Conformity to Standard IS:15683:2006 With Latest Amdmnt. - Type Stored Pressure Stored Pressure, Gas Cartridge Type Extinguishing Media Powder Based Water Based, Foam Based, Powder Based, Carbon Dioxide Based, Clean Agent Expellant Medium N2 Based (Stored Pressure) CO2 Cartridge Based, N2 Based (Stored Pressure), CO2 Extinguishing Medium Constructional Foam Based Extinguishing Media NA - Powder Based Extinguishing Media ABC - Clean Agents Based Extinguishing Media NA - Foam Based Fire Extinguisher Capacity(Ltrs) NA 2, 4, 6, 9, NA Powder Based Fire Extinguisher Capacity (Kg) 6 1, 2, NA 1/4 Carbon Dioxide Based Fire Extinguisher Capacity (Kg) NA 2, 3, 4.5, NA Water Based Fire Extinguisher Capacity NA 2, NA Clean Agents Fire Extinguisher Capacity (Kg) NA 2, NA Weight of Filled Portable Fire Extinghuisher (Kg) 10.5 Rechargebale true - Color Coding Blue - Fire Extinguisher Suitable for Class -A Fire true - Fire Extinguisher Suitable for Class -B Fire true - Fire Extinguisher Suitable for Class -C Fire true - Fire Extinguisher Suitable for Class -D Fire false - Fire Extinguisher Suitable for electrical Fire false - Performance Operating Temperature (° C) -10° C to + 55° C - Test pressure/Burst Pressurire Extinguisher except CO2 for water/Foam/Powder type fire extinguisher Test Pressure >=20 Bar, Burst Pressure >=55 Bar - Test pressure/Burst pressure for CO2 type Extinguisher (write NA if not applicable) NA - Discharge Range for Extinguisher (Meters) >=2 for Class-A - Effective Discharge Time for Fire Extinguisher, Min (Seconds) 13 Fire Rating for Class -A Fire Extinguisher 3A - 2/4 Fire Rating for Class -B Fire Extinguisher 34B - Certification BIS Marking Yes - CM/L No.* with Validity Period - - Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification YES - Test Report No - - Test Report Date - - Name of the Lab - - Address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Minakshi Jain 303702, MORIJA ROAD, BEHIND POWER HOUSE, CHOMU 10 15

diesel generators- DG Sets Diesel Generators- DG Sets ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 30 30 No of Phase - Three Phase ENGINE Make of Engine - - Model Number of Engine - - Capacity of Engine (cc) - - Engine Power (kWm) - - ISI Marking to IS :10001 for engine false - Type of Engine cooling Liquid Cooled Air Cooled, Liquid Cooled Type of governer Mechanical Mechanical, Electronic Class of governer A1 A0, A1, A2 Number of cylinders (nos) 3 - No of Strokes (nos) 4 - Rated RPM of Engine (RPM) - 1500, 3000 Overload capacity for one hour for every 11 hours continuous 10 - 1/4 running at full load (%) Specific Fuel Consumption (gm/kWh) - - Starting voltage (volt) 24 - ALTERNATOR AC GENERATOR(ALTER NATOR) Make - - AC GENERATOR(ALTER NATOR) model Number - - Rating of AC Generator (KVA) 30 - Power Factor of AC generator 0.8 - Efficiency at rated Power factor at 75% of full Load 89 - Compliance of Alternator to IS:13364(part-1) Yes - Type of alternator Brushless - Voltage Regulation Grade VG 3 - Alternator IP Rating IP 23 - Class of Insulation H - CONTROL PANEL Control Panel Manual Manual, AMF IP Rating of Control Panel IP 54 - ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6, 1.8, 2, 1.2 Thickness of Foam 25 - Density of Foam for sound insulation 28 - Noise level at 1 meter (dB) 73.5 - BATTERY Battery Type & Specification Low Maintenance free to IS: 14257 for high cranking performance - Battery capacity (Ah) - - No of batteries 1 - TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory No - Test Report number and date(Engine) - - Name and address of laboratory(Engine) - - 2/4 Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory Yes - Test Report number and date(Alternator) - - Name and address of laboratory(Alternator) - - DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes - WARRANTY INSTALLATION & COMMISSIONING Warranty 2 Installation & Commissioning With Installation With Installation Agreed to STC of the Product Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Minakshi Jain 303702, MORIJA ROAD, BEHIND POWER HOUSE, CHOMU 1 15

Meeting Table

Steel Bookcases Steel Bookcases ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:7761 Latest true - Type of lock cam lever lock with common key 10 lever cam lock, three way bolting device controlled by 6 lever lock, three way bolting device controlled by lock, cam lever lock with common key, lock not to be provided Number of Doors (NOS) 4 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 Mechanism Scissor mechanism for receding inside the top of respective component - MATERIAL Thickness of MS Sheet used for Shutter in mm 1.0 - Thickness of MS Sheet used for Shelf in mm 1.0 - Thickness of MS Sheet used for Top, Bottom, Back and Sides in mm 1.0 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.25, 1.3 1/3 Material of Handle Zinc Base Alloy - Thickness of Transparent glass in Shutters in mm 2.5 - DIMENSION Height of Steel Bookcase in mm (± 10 mm) 1675 As per GeM Catalogue. Width of Steel Bookcase in mm (±5 mm) 840 610, 710, 840, 914, 1000, 1100, 1200, 1300, 1400, 1500 Depth of Steel Bookcase in mm (± 3 mm) 305 mm 305 mm, 320 mm, 340 mm, 360 mm, 380 mm, 400 mm MISC Paint Stove Enamelled - Colour of Paint ash gray - Packing bubble sheet - CERTIFICATION ISI Marked false true, false Test reports to be furnished to buyer on demand NO YES, NO BIFMA certified NO YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 3 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Suraj Singh 494111, Government Polytechnic Sukma, Kumharras, District Sukma, Chhattisgarh 20 15

Desktops Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 3 Year (s) Desktops ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 7th 7th Processor Intel Pentium G4560 ( 3.5 GHz, 3 MB Cache, 2 Cores) As per GeM Catalogue. Motherboard Chipset Intel B250 As per GeM Catalogue. Expansion Slots (PCIe x 1) (Number) 1 - Expansion Slots (PCIe x 4) (Number) 1 - Expansion Slots (PCIe x 16) (Number) 1 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre-Loaded) Linux Windows 10 Professional, Linux, DOS, Windows 10 Home, Windows 10 Professional under Microsoft Shape the 1/4 Future Program RAM Type of RAM DDR 4 - RAM Size (GB) 4 4 (or higher) RAM Expandability upto (GB) 16 16, 32, 64 (or higher) RAM Speed (MHz) 2133 - Storage Hard Disk (GB) 1000 1000 (or higher) Cabinet Cabinet Small Form Factor - Cabinet Volume (Litres) - - Internal Bays 1 - External Bays (Number) 1 - DIMM Slots (Number) 2 - Connectivity Wireless Wi-Fi 802.11ac - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 4 - USB Port 3.0 (Number) 4 - Serial Port false - Parallel Port false - VGA false - HDMI true - Display Port true - Monitor Monitor Size (INCHES) 18.5 18.5 (or higher) Monitor Resolution (PIXELS) 1366x768 1366x768, 1920x1080, 3200x1800, 3840 x 2160, 1440 x 900, 1600 x 900 Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive N/A - 2/4 Internal Speaker true - On Site OEM Warranty (Year) 3 3 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vijay Kumar 135001, O/o Civil Surgeon 6 15

Human Resource Outsourcing Service

Security Manpower Service

Human Resource Outsourcing Service

chairs-office Chairs-office ( 140 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest true - Chair Type Without Arms Without Arms Type of Seat and Backrest Padded with Polyurethane Foam Made of Polythene cane, Padded with Polyurethane Foam, moulded plywood, injection moulded Polypropylene, Seat made of padded with polyurethane foam and Backrest made of Mesh with support of injection moulded polypropylene Frame Type Cantilever Cantilever, 4 Legs Castors Without With, Without MATERIAL Type of Wood used in Polythene cane Chair NOT APPLICABLE solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover leatherite leather foam, leatherite 1/4 Thickness of Plywood used in Backrest IN MM (±1 mm) N.A 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material CRCA ERW round pipe MS, wood, CRCA ERW round pipe, ERW pipe, CRCA pipe with wooden sheet, STAINLESS STEEL, STAINLESS STEEL 304, STAINLESS STEEL 202, chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) N.A - Material of Fabric of Seat Cover fabric black leatherite, leather foam, knitted with cane, fabric, polyur athane, N.A Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) N.A - Thickness of Plywood used in Seat ±1(mm) 18 mm 12 mm, N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) N.A 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material NA As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) N.A 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 15 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type nylon rubber - DIMENSION Size of Material (mm) 14 SWG 25 mm round pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe Chair Height ±15(mm) 890 mm 700 mm, 750 mm, 800 mm, 830 mm, 850 2/4 mm, 890 mm, 950 mm, 1000 mm, 1050 mm, 1100 mm Seat Depth ±10(mm) 430 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 400 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 400 400, 430, 460, 480, 500, 3 80 Backrest Width ±10(mm) 350 mm 350 mm, 480 mm Backrest Height ±10(mm) 350 mm As per GeM Catalogue. Arm Length ±5(mm) N.A 200 mm, 250 mm, 300 mm, 350 mm, 490 mm Arm Width ±2(mm) N.A 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black - Paint Type N.A chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint NA - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 YES - Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO NO YES, NO 3/4 18001:2007 certified WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ravi Kumar Dadheech 306401, College Rd, Indira Colony Vistar, Pali, Rajasthan 306401 140 15

Stadiometer- ICDS Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 3 Year (s) Stadiometer- ICDS ( 167 ) Technical Specifications Specification Specification Name Values Allowed Values Standards Confirmity to Stadiometer as per ICDS standards Yes Yes Stadiometer designed to Measure Height of Adult and Children aged 24 Month and Above in Vertical Position Yes Yes Performance Parameters Smallest Graduation for Stadiometer (cm) 0.1 cm 0.1 cm Accuracy for Stadiometer (cm) (+/-)0.1 cm (+/-)0.1 cm, (+/-)0.2 cm Precision for Stadiometer (cm) (+/-)0.1 cm (+/-)0.1 cm, (+/-)0.2 cm Warranty (in Years) 1 1, 2, 3, 4, 5 Dimensional and Material Parameters Unit of Measurement In Centimeters - Measuring Length in vertical position of Stadiometer (should be able to measure upto 200 - 1/5 200 cm at least) Width of board for stadiometer (cm) Approx 5.5 cms - Weight of the device (Kg) 2.2 - Material of Board Alluminium mild steel rust proof, Alluminium Additional Features No part Should be Loose or Shaking During Transpotation Yes - Double sided graduation Parallel to Board for Easy Measurement Yes - Stable connection assuring precise and accurate measurement Yes - No need of calibration as all parts have prefixed position Yes - Stadiometer should have Firm flat surface Yes - Designed for heavy duty use in demanding conditions Yes - Simple and fast set up, no tool (screw driver etc) required Yes - Orientation of numerals on the measurement scale: parallel to the board Yes - Stadiometer should have large foot plate providing extra stable base and smoothly gliding measuring slide/wedge Yes - Stadiometer shall have Adjustable feet for stability on uneven or soft ground and also spirit level indicator to check flat surface Yes - Fold-up Mechanism and low-weight, making it compact and easy to transport Yes - Stadiometer shall be Yes - 2/5 free from sharp edges and corners Stadiometer shall have friction feature between board and measuring slide/wedge for preventing the latter from drooping when released Yes - Durable, Resistance to excessive Humidity, High tempreture resistant, water resistant and shock Resistant Yes - Stadiometer supplied with : 1 Carry bag or carry case made of long lasting fabric, zipper closer (ii) removable, adjustable shoulder/back strap(s) and (iii) small side pocket for storage of operating instructions, loose parts and/or stationery material Yes - Stadiometer supplied with Instructions for use, training, maintenance and troble shooting in English, Hindi and any other regional language as per requirment, appropriately illustrated with pictograms Yes - Packed in a carton box which should be of sturdy quality and provides adequate protection of the goods while in transportation Yes - Reports Model approval from Director (Legal Metrology) Yes - Certificate number and date from Director (legal Metrology) Department - - Type Test certificate Yes - 3/5 including Environmental conditions from Regional Reference and standard laboratory (RRSL) RRSL Certificate Number, date and address - - Calibration from concerned weight and measurement controllerate to be obtained at the time of supplies Yes - Model approval certificate, Type test and calibration certificate to be furnished if asked by buyer at the time of supplies Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kailas Namdev Ghodake 431401, Zilla parishad, Jintur road, parbhani 167 15

scanners

Desktops

Wooden Podium

almirah- Steel Almirah- Steel ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest true - No of shelves (Nos) 4 - Type of Shelves Fixed - Locker Provided false - Locking System with the locker NA - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 4 - Number of Glass Sheet fixed in each Almirah door (Nos) N.A - Construction Welded - Lock Three Way bolting device controlled by lock - MATERIAL Material M S Sheet conforming M.S sheet conforming 1/4 to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker N.A - Length of Glass Sheet ±10 (mm) N.A - Width of Glass Sheet ±10 (mm) N.A - Sheet Thickness of door in mm 0.8 mm (Minimum) - Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) - Sheet Thickness of Shelves N.A - Sheet Thickness of Pedestal in mm 0.8 mm (Minimum) - Material of Lock steel - Material of Keys steel - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1855 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1 450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 480 430, 455, 480, 486, 270, 3 70, 400 Inside Height of Locker in mm (± 5 mm) N.A - Inside Width of Locker i mm (±5 mm) N.A - Inside Depth of Locker in mm (±5 mm) N.A - 2/4 Width of Stiffner in mm (±5 mm) N.A - Thickness of MS Sheet of Stiffner (in mm) N.A - Stiffened Pedestal height in mm (±2 mm) 120 - Pedestal Width in mm (±2 mm) 70 - COLOUR & FINISH Finish powder coated - Colour of Paint ash gray - Packing: Bubble Sheet - CERTIFICATION ISI marked false - CM/L No. - - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajai rajay.saxena 471001, Infront Of Distt.Hospital, Near Chhatrasal Chowk Chhatarpur 1 15

All in one All In One ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel - Processor Generation 7th 7th Processor Intel Core i3-7100 (3.9 GHz, 3 MB Cache, 2 Cores) Intel Core i3-7100 (3.9 GHz, 2 Cores) Chipset Chipset Intel H110 - Graphics Graphics type Integrated - Graphic Card Description Intel Hd 620 - Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 1000 1000 (or higher) Hard disk drive speed (RPM) 7200 - RAM Type of RAM DDR4 - RAM Size (GB) 4 4 RAM Expandability Upto (GB) 32 8, 16, 32, Not- Available Ram speed (MHz) 2400 - Operating System Operating system Windows 10 Windows 10 Home, 1/4 Professional Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows - Display Display Size (Inch) 19.5 19.5 Type of Display Non Touch Non Touch display resolution (Pixels) 1600 x 900 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes - Ports USB Port 2.0 (No.) 2 - USB Port 3.0 (No.) 4 - VGA Port Not-Available - HDMI Port Available - Thunderbolt Port (No.) Not-Available - Display Port Available - Input Devices Keyboard Standard with USB Interface - Mouse Optical Scroll with USB Interface - Audio Integrated Stereo Sound with internal speakers & Mic. - Connectivity Wi-fi Connectivity 802.11 ac - Bluetooth Connectivity 4.0 or higher - LAN Port Integrated Gigabit Ethernet 10/100/1000 - Certification BIS Registration under CRS of Meity Yes - BIS Registration no - - Certifications Available Energy Star - ROHS Compliance Yes - Power Maximum Wattage (Watts) 120 - Power Efficiency (%) Minimum 80 - Others Webcam HD - DVD R/W Available - 2/4 Optical drive Integrated - Stand Standard - On Site OEM Warranty (Year) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sharad Chandra Dube 450331, Divisional Forest Office Burhanpur 3 15

Multimedia Projectors, Projector Screen Multimedia Projectors ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values Specifications Technology DLP LCD, DLP, Lcos, SXRD, Thr ee Clip DLP Projection Method Front and Rear both - Native Resolution 1024 x 768 (XGA) As per GeM Catalogue. Brightness (Lumens) 3000 As per GeM Catalogue. Contrast Ratio (Minimum) (pixels) 22000:1 - Zoom Feature Yes - If Yes, Zoom (%) 120 - Availability of Lens Yes - If Yes, Type of Lens Long Throw - Aspect Ratio 4:3 - Keystone Correction Automatic - Projection Lamp UHP UHP, LED, Laser, LED & Laser Hybrid, UHE Minimum Life of projection Lamp (In Normal Mode) (Hours) 10, 000 - Lamp Hour Counter (In- Built) Yes - Video Compatibility HDTV - 1/4 Inbuilt Speaker Yes - HDMI/DVI Port Yes - Analog RGB In Port (Hours) Yes - Analog RGB Out Port Yes - Audio In Yes - Audio Out Yes - Video In Yes - Storage Media Port (USB- Type A ) Yes - WiFi Availability No - Wireless Screen Share No - LAN Connectivity Yes - 3D Ready Yes - Power Consumption in Sleep Mode (Watts) 0.5 - Power Consumption in Normal Mode (Watt) 260 - Noise Level in Sleep Mode (dB) 27 - Noise Level in Normal Mode (dB) 29 - Power Supply 210V-240V, 50 Hz - Operating Temperature Range (Degree C) 40 - Operating Humidity (RH %) 294x218x110mm - Dimensions (mm x mm x mm) 294x218x110mm - Weight (Kg) 2.3 - BIS Registration under CRS of Meity Yes - BIS Registration Number R-41007005 - Battery No - If Yes, Battery Capacity N/A - If Yes, Battery Backup Time (Hour) 0 - ON Site OEM Warranty 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity 2/4 S.No. Consignee Address Quantity Delivery Days 1 Ravi Kumar Dadheech 306401, College Rd, Indira Colony Vistar, Pali, Rajasthan 306401 8 15 Projector Screen ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values Specifications Type Motorised Motorised Supported Display Technology 3D 1080, 3D, 4K Technology, 1080p and 3D, 1080p, 3D and 4K Technology Mounting Type Wall Mount Wall Mount, Stand Mount Aspect Ratio 4:3 - Display Fabric Material MOTORISED_6x8_IN - Length x Width of Projector Screen (Inch x inch) 120 inch Digonal - Gain 1.2 gain - Life time lubricated motor for smooth & silent functioning of the screen NA - Remote No - If Yes, Type Of Remote NA - Anti UV Coating No - Waterproof/Washable Yes - Fire Proof No - Autolock/Instalock Feature Yes - Weight (Kg) 8 - On Site OEM Warranty 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ravi Kumar 306401, Indira 8 15 3/4 Dadheech Colony Vistar, Rajasthan 306401

Ceiling Fan

Multifunction Machines