Loading
Loading…
Loading…
298 results • Recent activity
Class Room Desking and Seating Class Room Desking And Seating ( 100 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING ONLY TABLE/DESK WITH SHELF/STORAGE UNDER DESK ONLY TABLE/DESK, ONLY SEATING, INTEGRATED DESK CUM SEATING, INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK, ONLY TABLE/DESK WITH SHELF/STORAGE UNDER DESK Desking Configuration SINGLE SEATER SINGLE SEATER, TWO SEATER, THREE SEATER, FOUR SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 600 * DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18 mm thick prelaminated Particle Board * Material of Support Mild Steel square * 1/3 Structure or Side Pannel Section of size 25x25 mm and wall thickness minimum 1.6 mm Height of Desk Top in mm (±5 mm) 750 * Width of Desk Top in mm (± 5 mm) 450 * SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 18 mm thick prelaminated Particle Board * Material of Support Structure Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm * Material of Seat Cushion WITHOUT CUSHION 40 mm thick PU foam of density 40 gram per cubic cm, WITHOUT CUSHION, ONLY DESK NO SEATING Width of Seating in mm (±10 mm) ONLY DESK NO SEATING * Height of Seat in mm (±10 mm) ONLY DESK NO SEATING * Width of backrest if provided in mm (± 5 mm) No Backrest * Back Support for Seating of Same materail as Seating back support not provided Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) Can be configured as per buyer's choice within offered technical details * Colour of finish As per buyer's choice * Desk top finishing Two long sides to be post form half round profile plus with corner edge bending and other two sides edge banded with 2 mm thick PVC tape with the help of hot melt glue * Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) NA * WARRANTY Warranty period in number of years 2 1, 5 2/3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dushyant Pareek 305901, S.D.GOVERNMENT COLLEGE TODGARH ROAD BEAWAR 100 15
Microscopes - Pathological and Research Microscopes - Pathological And Research ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values CONFORMITY/TYPE EYE PIECE - OBJECTIVE DETAILS Microscope Type pathological monocular hinged type without built in light and without light intensity regulator pathological monocular hinged type without built in light and without light intensity regulator, pathological monocular non hinged type with built in light and with light intensity regulator, pathological binocular non hinged type with built in light and with light intensity regulator, research binocular non hinged type with built in light and with light intensity regulator, Research Trinocular - Non-Hinged type -with built-in light and with light intensity regulator Conformity to Indian Standard Pathological IS:4381 latest - ISI MARKED false true, false Eye piece Type Huygenian Huygenian, Compensating Binocular Eye pieces 'NA' for Monocular - 1/3 Confirming to the requirements of IS: 8275/1976 ( latest) Eye Piece with magnification monocular 10 x monocular 5 x, monocular 10 x, monocular 15 x, set of two for binocular 5 x, Set of Two For Binocular 10x Objective Type achromatic achromatic, semiapochromatic, Apochromatic Objective Magnification 45 x 10 x, 20 x, 40 x, 45 x, 90 x, 100X Numerical Apperture of Objective 0.25 0.25, 0.5, 0.65, 1.25 Type of lamp for Illumination 'NA' for Hinged type - GENERIC Plano Concave mirror attachment yes - Stage Ractangular - Size of Stage 110X10 - Coarse and Fine Movement of stage yes - Co-axial focussing false - Micrometer Arrangement false - ACCESSORIES Extra eyepieces (inclusive in the scope of supply) NA 5 x, 10 x, 15 x, set of two 5 x, set of two 10 x, set of two 15 x, NA Carrying case (inclusive in the scope of supply) yes - WARRANTY Warranty 2 1, 2, 3, 4, 5 Higher is better CERTIFICATION Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification false - Test Report No and Date NA - Name and Address of the Lab NA - * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Mahesh Kumar Vaishnav 342304, AGRICULTURE UNIVERSITY OPPOISTE MANDORE RAILWAY STATION JODHPUR 10 15
swachh bharat 10-12 litre waste container set Average Turn Over of Last 3 Years 200 Lakh (s) Experience with Gov. Required 3 Year (s) Swachh Bharat 10-12 Litre Waste Container Set ( 13500 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Product Description swachh bharat 10-12 litres waste container set - Selling unit set of 2 containers - Advertisement provided on the container for price competitiveness yes - Advertisement on containers (if provided) To be arranged by the manufacturer on their own for price competitiveness - Advertisement Coverage, (if provided) Durable Sticker on upper 2/3rd of the horizontal circum-area - Conformity of the advertisement on 2/3rd area of the Sticker as allowable under under relevant rules laws of India or ASCI (The Advertising Standards Council of India) - Two Silver stickers on the 1/3rd of theLower Urban Local Body (ULB) LOGO (to be provided - 1/4 portion of the containers by ULB) on one side and Swachh Bharat LOGO on the other side Stickers with instruction Dry waste on blue container and wet waste on green container - Pre - Dispatch Inspection (As advised by buyer) CIPET/RITES/Any other PSU in the field of Inspection - CONSTRUCTIONAL Colour in Set One Green and other Blue - Material Virgin HDPE Conforming to IS 7328 latest Virgin HDPE Conforming to IS 7328 latest, Virgin PPCP Conforming to IS 10951 latest Shape of the container Round - Top Diameter ( in mm) 242 - Holes at Bottom 1 no. of 10 mm dia with mesh 1 no. of 10 mm dia with mesh, 4 nos. of 2 mm dia each Rib at Bottom yes - Vertical Ribs at the outer surface yes - Containers must be un- breakable, Robust, Reusable and washable yes - Maximum Filler Content (%) not more than 2% - Maximum Ash Content, Conformity test as per Annex D of IS: 14887 (Latest) (%) Not mkore than 1% - UV Resistance, % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table 1- Cycle Number 2 (%) Minimum 50% - Lid without - Rim at top Yes - Handle without - DIMENSIONS Capacity of one Waste container unit (Ltr) 10-12 Ltr - Bottom Diameter (in mm) 212 - 2/4 Overall Height (in mm) 300 - Wall thickness of the container (in mm) Minimum 1 mm - Mass of one waste container unit (in grams) Min 270 grams - CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/IL AC acredited Lab to prove conformity to the specifications Yes - Test Report No 5400 - Test Report Date 12/02/2015 - Name of the Lab CIPET - Address of the Lab Ahmedabad, Gujarat - Conformance to the Drop test as per clause no 3 (10) of IS 3730 (latest) filled with 12 Kg sand in place of water Yes - Conformance to falling weight impact test as per clause A 6 of IS 2508 (latest) condition 1 Kg at one and half meter height yes - Embossing at outer bottom surface Manufacturer's Logo, Swachh Bharat Mission Logo and instruction "Not for sale' - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Amrendra Kumar 841226, nagar parishad siwan 13500 30
revolving chair Revolving Chair ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type 360 Degree swivel, posture control with multilocking position synchronized mechanism As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest maroon - Ergonomic Seat Design false true, false Yes is better 1/5 Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame - backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking 3-Position Locking - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Chrome finish with 5 wheels Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin 2/5 Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU foam covered with mesh fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 32 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 32 - Material of Fabric Back Cover mesh fabric mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover Mesh Fabrics foam laminated mesh fabrics, Mesh Fabrics, N.A 3/5 GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram - DIMENSION Overall Chair Height ±15mm 1180 As per GeM Catalogue. Backrest Height ±15mm 520 As per GeM Catalogue. Backrest Width ±10mm 550 As per GeM Catalogue. Seat Height ±15 mm 500 420, 450, 480, 500, 520 Seat Width ±10 mm 550 440, 520, 550, 460, 360 Seat Depth ±10 mm 480 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.6 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 25 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 25 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand NO YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO NO YES, NO 4/5 14001:2015 certified OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Balwant 465001, zilla panchayat shajapur 6 15
Class Room Desking and Seating Average Turn Over of Last 3 Years 125 Lakh (s) Experience with Gov. Required 3 Year (s) Class Room Desking And Seating ( 7635 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING ONLY TABLE/DESK ONLY TABLE/DESK, ONLY SEATING, INTEGRATED DESK CUM SEATING, INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK, ONLY TABLE/DESK WITH SHELF/STORAGE UNDER DESK Desking Configuration TWO SEATER TWO SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 800 As per GeM Catalogue. DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 As per GeM Catalogue. 1/4 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side Material of Support Structure or Side Pannel Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm Height of Desk Top in mm (±5 mm) 650 650 mm Width of Desk Top in mm (± 5 mm) 400 As per GeM Catalogue. SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side As per GeM Catalogue. Material of Support Structure Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm As per GeM Catalogue. Material of Seat Cushion WITHOUT CUSHION WITHOUT CUSHION Width of Seating in mm (±10 mm) 300 As per GeM Catalogue. Height of Seat in mm (±10 mm) 370 As per GeM Catalogue. Width of backrest if provided in mm (± 5 mm) 200 As per GeM Catalogue. Back Support for Seating of Same materail as Seating Provided without cushion Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) NO - Colour of finish As per buyer's choice - Desk top finishing Two long sides to be - 2/4 post form half round profile and other two sides edge banded with CP Teak Wood Lipping Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) NA - WARRANTY Warranty period in number of years 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jai Prakash Rath 492001, Directorate of Public Instructions (DPI) Indravati Bhavan, Block C, First Floor, 7635 45