Organization Name Tender Results

Leg Press - Outdoor Gym Equipments Leg Press - Outdoor Gym Equipments ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Leg Press Double Leg Press Single, Leg Press Double SIZE Length 1655 - Width 700 - Height 1858 - CAPACITY Maximum User Weight ( Kg ) 120 100, 110, 120 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1239 ( Part 1 )- 2004, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true Main Central Pipe 125 mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Central Pipe, Class as per IS 1239 Heavy Medium, Heavy, Not applicable for pipe as per IS 1161 Designation of Main Central Pipe ( as per IS MILD STEEL 114 mm OD pipe - 1/5 1161 ) Moving Frame Pipe 40mm Nominal bore G.I. pipe 32mm Nominal bore G.I. pipe, 40mm Nominal bore G.I. pipe Moving Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Moving Frame Pipe ( as per IS 1161 ) 50 mm OD GI pipe - Foot Rest Frame Foot Rest Hinging Pipe 32mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe Foot Rest Frame Pipe, Not applicable for M.S. Plates Designation of Foot Rest Frame Pipe ( as per IS 1161 ) 42 mm OD GI pipe - Connecting Links 40mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 10mm thick MS plates, 12mm thick MS plates Connecting Links Pipe, Not applicable for M.S. Plates and Pipes as per IS 1161 Designation of connecting link Pipe ( as per IS 1161 ) 32 mm OD GI pipe - MS Foundation Plate Thickness 12 10, 12 Foundation Pipes with anchoring 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 125mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Not applicable for pipe as per IS 1161 Designation of Foundation Pipe ( as per IS 1161 ) NO - 2/5 Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Nuts and Bolts for Assembly G.I. - Movement must be supplied with bearings Yes - Bearings Tapered Roller Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Seat and Back Rest 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges 2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges, 3mm thick, HDPE with uniform bending radius to avoid sharp edges, 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges, 2.5mm thick, M.S. Perforated with uniform bending radius to avoid sharp edges, LLDPE with uniform bending radius to avoid sharp edges Foot Rest Aluminum casting material - Closing Caps of open ends of the pipes, bearings, bushes and base G I Caps - Thickness of closing caps ( min ) 3 - All Plastic Components U V stabilised, weather resistance - COLOUR Colour As per buyer's requirements - Paint/Finish Poly Urethane Paint, UV Resistant - Paint Coating Thickness ( min ) 100 - OTHER REQUIREMENTS Ergonomic Design Yes - 3/5 Foot rest shall be antislip/antiskid Yes - Moving Scope should be Limited Yes - There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free from entrapments and sharp edges Yes - Installation Instructions must be provided Yes - Installation Included Included, Not Included Safety and quality Requirements European Standard EN 16630: 2015 latest - Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) No As per European Standard EN 16630, No Registration No and Validity of Registration NA - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 2 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajnish Chandra Srivastava 335001, GOVERNMENT P.G COLLEGE, HINDUMALKOT ROAD, SRIGNGANAGAR 1 15

Chest Press - Outdoor Gym Equipments Chest Press - Outdoor Gym Equipments ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Chest Press Double Chest Press Single, Chest Press Double SIZE Length 1000 - Width 650 - Height 1600 - CAPACITY Maximum User Weight ( Kg ) 100 100, 110, 120 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1161:2014, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true Main Central Pipe 80mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Central Pipe, Class as per IS 1239 Medium Medium, Heavy, Not applicable for pipe as per IS 1161 Designation of Main NA - 1/5 Central Pipe ( as per IS 1161 ) Handle Frame 32mm Nominal bore G.I. pipe 32mm Nominal bore G.I. pipe, 40mm Nominal bore G.I. pipe Handle Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Handle Frame Pipe ( as per IS 1161 ) NA - Seat Frame 32mm Nominal Bore G.I. Pipe 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe Seat Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Seat Frame Pipe ( as per IS 1161 ) NA - Connecting Links 25mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 10mm thick MS plates, 12mm thick MS plates Connecting Links Pipe, Not applicable for M.S. Plates and Pipes as per IS 1161 Designation of connecting link Pipe ( as per IS 1161 ) NA - Foot Rest Pipe 25mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe Foot Rest Pipe, Not applicable for pipe as per IS 1161 Designation of Foot Rest Pipe ( as per IS 1161 ) NA - MS Foundation Plate Thickness 10 10, 12 Foundation Pipes with anchoring 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with 2/5 M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 80mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Not applicable for pipe as per IS 1161 Designation of Foundation Pipe ( as per IS 1161 ) NA - Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Seat and Back Rest 2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges 2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges, 3mm thick, HDPE with uniform bending radius to avoid sharp edges, 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges, 2.5mm thick, M.S. Perforated with uniform bending radius to avoid sharp edges, LLDPE with uniform bending radius to avoid sharp edges Hand Grips Polyurethane - Nuts and Bolts for Assembly G.I. - Movement must be supplied with bearings Yes - Bearings Ball Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Closing Caps of open ends of the pipes, bearings, bushes and base Fibre Reinforced Plastic - Thickness of closing caps ( min ) 2 - All Plastic Components U V stabilised, weather - 3/5 resistance COLOUR Colour As per buyer's requirements - Paint/Finish Poly Urethane Paint, UV Resistant - Paint Coating Thickness ( min ) 80 - OTHER REQUIREMENTS Ergonomic Design Yes - Moving Scope should be Limited Yes - There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free from entrapments and sharp edges Yes - Installation Instructions must be provided Yes - Installation Not Included Included, Not Included Safety and quality Requirements European Standard EN 16630: 2015 latest - Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) No As per European Standard EN 16630, No Registration No and Validity of Registration NA - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 2 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajnish Chandra Srivastava 335001, GOVERNMENT P.G COLLEGE, HINDUMALKOT 1 15 4/5 ROAD, SRIGNGANAGAR

Public place seating chair Average Turn Over of Last 3 Years 20 Lakh (s) Experience with Gov. Required 3 Year (s) Public Place Seating Chair ( 70 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of Seating Integrated Seat and Backrest - Style without arm and backrest with arm and backrest, with arm and without backrest, without arm and with backrest, without arm and backrest Seating Capacity (Nos) 3 2, 3, 4, 5 Number of arms (Nos) 2 - Delivery status Knocked Down Supply to be assembeled by Seller on Site - Seat Cushion WITHOUT CUSHION - Backrest Cushion WITHOUT CUSHION - MATERIAL Material of Main Frame SS 202 mild steel, M S ERW tube, SS 202, SS 304 Material of Seat and Backrest SS 202 Mild Steel, PU Foam reinforced with 2 mm M 1/4 S sheet inserts, SS 304, MS RECTANGULAR SECTION PIPE Material of Arms SS 202 armrest are made up of powder coated high pressure aluminium dye cast, cold rolled steel, MS ERW TUBE, MS RECTANGULAR SECTION PIPE Material of Legs SS 202 cold rolled steel, POWDER COATED HIGH PRESSURE ALUMINIUM DYE CAST LEGS, MS RECTANGULAR SECTION PIPE Material of Side Bar Bracket solid steel v-shaped powder coated - Thickness of material of Main Frame in mm 1.2 - Thickness of material of Arms in mm 1.1 - Type of bolts M12 Bolts - Thickness of PU Foam for Seat and Backrest ±2(mm) N.A - Density of PU Foam for Seat and Backrest ±2(Kg/Cubic Metre) N.A - Covering Material for Seat and Backrest NA - DIMENSION Overall Length in mm (±10 mm) 1500 As per GeM Catalogue. Overall Depth in mm ( ±5 mm) 450 As per GeM Catalogue. Overall Height in mm (±5 mm) 760 As per GeM Catalogue. Seat Height from Floor in mm (±5 mm) 340 mm - Thickness of material of Seat and Backrest (mm) 1.2 mm - CERTIFICATION Conforming to International Standard for Public YES YES, NO 2/4 Seating (*BIFMA X 5 dot 4 or equvalent) COLOUR & FINISH Colour of Covering Material N.A - All M S Strucure Finish NA - Colour of Paint NA - All steel component to be epoxy powder coated NA - WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 5 MISC Seat and Backrest are Perforated false - Adjuster for legs false - Arms Chrome Plated false - Legs Chrome Plated false - Cushion on Arms false - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sumit Kumar 335024, WARD NO 10 PO GAJSINGHPUR 70 15

Desktops

SPECTROPHOTOMETER Experience with Gov. Required 7 Year (s) SPECTROPHOTOMETER ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type of Spectrophotometer UV - VISIBLE UV - VISIBLE, VISIBLE, UV - VISIBLE - IR Type of Optical System Single Beam Single Beam, Split Beam, Double Beam Monochromator Type Czerny-turner Reflexive Grating, Holographic Gr ating, Czerny-turner, NA Detector Type Photodiode Photo Multiplier Tube (P MT), Photodiode, CMOS, Diode array Spectral Bandwidth Type Fixed Bandwidth Fixed Bandwidth, Variable Bandwidth LIGHT SOURCE Light Source Deuterium Lamp, Tungsten Halogen Lamp Halogen Lamp, Deuterium Lamp, LED, Tungsten Halogen Lamp, Xenon Flash Diffraction Grating (lines/mm) 1200 600, 800, 1000, 1200, 14 00, 1600, 1800 Switching of Light Source Automatic Automatic, Mannual 1/5 Wavelength Setting And Scanning Automatic Automatic, Mannual OPTICAL PERFORMANCE Source Wavelength - Minimum 200 175, 180, 185, 190, 195, 2 00, 320, 340 Source Wavelength - Maximum 1000 As per GeM Catalogue. Resolution 0.3 0.002, 0.3, 0.5, 1, 1.25, 1. 5, 1.7, 2 Wavelength Accuracy (+/-) 0.5 0.1, 0.8, 1.5, 2, 2.5 Bandwidth (nm) 1 0.1, 0.2, 1.8, 2.0, 4. 0, 5.0, 0 to 5.0 If variable band width, Specify the incremental step value(mm) NA - Scanning Speed (nm/min) 100 - Focal length (mm) 250 to 299 0 to 49, 50 to 99, 100 to 149, 150 to 199, 200 to 249, 250 to 299, 300 and above Photometric measurement modes Transmittance, Absorba nce, Concentration (Wavelength, time) Transmittance, time), Refl ectance, Energy, Polaris ation Photometric Absorbance (Max) (Abs) (+/-) 2.5 Photometric Absorbance Accuracy (Max) (+/-) 0.005 Photometric Transmittance (Max) (+/-) 100 Photometric Transmittance Accuracy (Max) (+/-) 0 Photometric Reflectance (Max) (+/-) 100 Photometric Reflectance Accuracy (Max) (+/-) 0.005 - Stray Light Correction Automatic - Baseline Correction Automatic - GENERIC Display Through PC In-built display, Through PC 2/5 Display type LED LCD with Backlight, LCD touchscreen, TFT, NA Display Size 24 Test result printing Through external printer Through inbuilt Printer, Through external printer If inbuilt printer, Type of printer N/A Thermal printer, Dot matrix, Laser b/w, Inkjet b/w, Color laser, Color inkjet, N/A Suitable software for connecting PC & Printer Yes - Connectivity RS 232 - Internal storage(GB) 0 Sample switching/selection Automatic - Capacity of Sample holder/Sample Carousel 4 - Mximum Path Length of sample 10 Number of Cuvettes supplied 10 10, 25, 50, 100, 200, 300, 400, 500 Power Supply 230 V ± 10, 50 Hz - Any other features/accesories covered in scope of supply - - Spares and Consumables inclusive in the scope of supply true List of Items and Quantity of each item included in the offer - - OPERATING CONDITIONS Minimum Operating Temperature 10 -5, 10, 0, 5, 10 Maximum Operating Temperature 45 35, 40, 45, 55, 60 Operating Humidity (RH) (%) at 40 degree C 85 80, 85, 90, 95 WARRANTY Onsite Warranty 1 1, 3, 4, 5 Availability of Spares (at extra cost) 2 2, 6, 7, 8, 10 3/5 Certification Availability of UL/CE Certification as per EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use General requirements No Yes, No Conformance to EMC/EMI as per EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use No Yes, No Availability of Test Reports from Central Govt/NABL approved/ILAC acredited lab to prove conformity to the specification No Yes, No If yes test report to furnished, to the buyer on demand N/A - Test Report number and date - - Name and address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pratima Srivastav 324001, JDB govt girls college, Nayapura Kota 3 15

Printer or photo Copier Paper Printer Or Photo Copier Paper ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297, 297 X 420 Size of the Paper A4 A4, A3 GSM of Paper 75 75, 80, 90, 95 Quantity Number of Sheets per Ream 500 500 Physical Characteristics Brightness in % 90 Tensile Index MD in Nm/g 45 - Tensile Index CD in Nm/g 30 - Opacity in % 90 - Tear Index (Avg) in Nm.m²/g 5 - Smoothness for both sides (Bendtsen) in ml/min 200 - 1/2 Thickness in µm 95 - Moisture in % 5 - Stiffness MD 3 - Stiffness CD 2 - Surface Strength Dennison (Wax Pick) >= 12 A 12 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Des Kumar Kurrey 495001, RTO OFFICE, SEPAT ROAD, BILASPUR 50 15

Keyboard and Mouse Combo Keyboard And Mouse Combo ( 16 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Keyboard Type Standard keyboard Standard keyboard, Flexible Keyb oard, Handheld, Mechani cal Keyboard Mouse Type Optical Movement Detection Technology Optical Movement Detection Technology, Laser Technology Keyboard Connectivity Wireless Wireless Mouse Connectivity Wireless Wired, Wireless Interface port for both Keyboard and Mouse USB 2.0 USB 2.0, USB 3.0, PS/2 If wireless, operating range of keyboard (meter) 2 - If wireless, operating range of mouse (meter) 2 - Number of keys on keyboard (Nos) 104 - Number of buttons in mouse (Nos) 3 - Mouse DPI (dpi) 1000 - 1/3 IP rating for keyboard 5 - Power source for wireless keyboard Battery - If Battery, type of battery AA battery - Power source for wireless Mouse Battery - Life of Keyboard (Million key strokes) 1 - Dpi Switcher Available - Touch Pad (Keyboard) Not-Available - Illuminated Keys (Keyboard) Not-Available - Illuminated Mouse No - Special keys (Keyboard) Not-Available - Dimensions for keyboard (LxWxH) (mm x mm x mm) 17.5 in x 5.6 in x 1 in - Dimensions for mouse (LxWxH) (mm x mm x mm) 2.3 in x 4.1 in x 1.5 in - Weight of Mouse (grams) 125 - Weight of Keyboard (grams) 300 - BIS Registration under CRS of Deity for wireless keyboard NA - BIS Registration Number - - Availability of test certificate from Central Govt/NABL/ILAC acredited lab to prove conformity to specification No - If Yes, Test Report Number & date - - If Yes, Name of Lab - - If Yes, Address of Lab - - Warranty(Years) 1 1 * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Bhoga Vinay Kumar 500033, Road No.25, Jubilee Hills. Hyderabad. 16 15

galvanized steel chain link fence fabric Average Turn Over of Last 3 Years 50 Lakh (s) Experience with Gov. Required 2 Year (s) Galvanized Steel Chain Link Fence Fabric ( 833 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conform to Indian Standard IS:2721-2003 Latest - CONSTRUCTIONAL Type of Selvage Both ends of the fabric knuckled( Fig 1C of IS 2721-2003) Both ends of the fabric knuckled( Fig 1C of IS 2721-2003), Both ends of the fabric without knuckling and twisting ( Fig 1D of IS 2721-2003) Mesh Size, (mm) 25±3 25±3, 40±4, 50±4, 63±4, 75±4, 100±5, 125±5, 1 50±5 Nominal Diameter of Mesh Wire (mm) 2.5±0.05 2.0±0.04, 2.5±0.05, 3.1 5±0.05, 4.0±0.05, 4.5± 0.05, 5.0±0.05 Length of Fabric (Metres) 15 - Width of Fabric (Metres) 1.5 - Diameter of Line Wire (mm) 2.5±0.05 - Number of Line Wires 2 Nos for Upto and including 2 Metres - 1/3 Width Heavy Coated Galvanizes Line Wire coform to IS 2721/2003 and IS: 280/2006 Yes - Minimum Weight per Square Metre of Galvanized Steel Chain Link Fence Fabric (Kg) 1.66 - CERTIFICATION ISI Marked false - BIS Licence No. - - Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - Test report to be furnished to the buyer on demand YES - Test Report No and Date - - Name of the Lab - - Address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Madan Singh 495334, MUNGELI 833 15

domestic refrigerators Domestic Refrigerators ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standrad IS:1476 latest for Direct Cool IS:1476 latest for Direct Cool, IS:15750(2006) for Frost Free ISI marked true - CML No. 2533954 - Capacity and Design features Storage Volume(NET CAPACITY) (Litres) 220 200, 220 Type of Door Double Single, Double Insulation Puff Puff, Polyurethane, Maxi 2, others Built in Voltage Stabilizer Yes - Method of Defrosting Direct Cool Direct Cool, Frost Free Performance BEE Star Rating as on date 3 2, 3, 4, 5 Eco-friendly refrigerant yes - Compressor Power saver Compressor - Voltage Range at 43 degree Centigrade (Volts) 230 (tolerance 10%) - Material Coil Material Copper (Cu) Copper (Cu), Aluminium 1/2 (Al) Finish and Colour Type of Finish Metallic Metallic, Matt, Printed Design Colour Silver As per GeM Catalogue. * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Geeta Sharma 304001, Govt. College, Tonk Bahir Road, Tonk 1 15

Televisions

Notebook Computers-laptop Notebook Computers-laptop ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 7 th 7 th Processor Intel Core i5-7200U (upto 3.1 GHz, 3 MB cache, 2 cores) As per GeM Catalogue. Graphics Graphics Type Integrated - Graphics Card Description Intel HD Graphics 620 - Graphics Memory (GB) Intel HD Graphics 620 - Memory Type of RAM DDR 4 - RAM Size (GB) 4 4, 8, 16, 32 RAM Expandable upto (GB) 16 8, 32, 64, NA RAM Speed (MHz) 2133 - Storage Type of Hard Disk Drive SATA SATA, SSD, Fusion, PCIe- based onboard SSD Hard Disk Drive Size( GB) 1000 128, 256, 512, 500, 1000, 2000 Hard Disk Drive Speed (rpm) 7200 - Operating System Operating System Windows 10 Windows 10 1/3 Professional Professional Ports USB 3.0 or higher (No.) 2 - USB Type C Available - VGA Port Not-Available - HDMI Port Available - DISPLAY PORT Available - Thunderbolt Port 1 - Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 - Wi-fi Connectivity 802.11 a/b/g/n - Bluetooth 4.0 or higher - Display Display Type Non Touch - Display Size (Inch) 14 Display Resolution (Pixel) 1366 x 768 1366 x 768, 1440 x 900, 1920 x 1080, 2304 x 1440, 2560 x 1600, 2736 x 1824, 2880 x 1800, 3200 x 1800, 3840 x 2160 Certification BIS Registration under CRS of Meity Yes - BIS Registration no. - - BEE/Energy Star Certification - - ROHS Compliance Yes - Additional feature Finger Print Reader No - Webcam (HD or Better) Available - Miscellaneous Optical Drive Available - Keyboard Standard - Trusted Platform Module Enabled Yes - Weight (With Battery) (Kg) 1.8 - Carry Case Included Included, Not Included Power Battery Type (Li-Ion/Li- Polymer) Removable - Battery Back-up (Hours) 4 - Warranty Battery Warranty (Year) 1 1, 3 On Site OEM Warranty (Year) 1 1, 3 2/3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dr.Hanumant Singh Chouhan 307026, S.M.C.C. COLLEGE ABUROAD, PALANPUR ROAD, KESARGANJ, ABUROAD 2 15

Portable PA System Portable PA System ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values General Specifications System Type 1 way 1 way, 2 way, 3 way Built in UHF Receiver Yes Yes, No Voice Priority Switch Yes - Number of wired MIC input Jacks 1 - Number of LINE input ports 1 - Number of wireless microphones 1 0, 1, 2, 3 DVD Slot Not-Available - USB Input Not-Available - Multimedia Card Reader Available - Bluetooth connectivity Not-Available Available, Not-Available Digital Recorder Yes - Built in Memory (GB) 0 - Charging Indicator Yes - Retractable handle and wheels Not-Available - PA system Output power (Watts) 25 - 1/3 Speaker Type 1 way (Inbuilt) - Audio Frequency Response (Hz) 50 - 15000Hz - Number of line out 1 - Battery indicator Single Led - Battery Backup Time (hours) 2-3 - Recharging Time (hours) 5-6 - Wireless Receiver Frequency Range (MHz) FM - Sensitivity in (dB) 0 - Signal to Noise Ratio in (dB) 60 - Number of Channels 1 Other specifications Weight (Including battery) (Kg) 4.65 - Dimensions (mm x mm x mm) - - Operating Temperature Range (Degree C) - - Operating Humidity (% RH) - - BIS Registration under CRS of Meity Yes - BIS Registration number & its Validity - - Availability of Test Reports from Central Govt/NABL/ILAB acredited lab covering all the declared parameters as per Governing specification - - If Yes, Test Report Number - - If Yes, Test Report date - - If Yes, Name of the Lab - - If Yes, Address of the Lab - - Warranty (Years) 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Dr.Hanumant Singh Chouhan 307026, S.M.C.C. COLLEGE ABUROAD, PALANPUR ROAD, KESARGANJ, ABUROAD 2 15

tat gunny-Hessian or hemp or jute cloth Tat Gunny-Hessian Or Hemp Or Jute Cloth ( 11050 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Conforming to Indian Standard IS: 2818 (Part 1 to 6): Latest - Cloth GSM (g/sq. m) 229 at 16 % contract regain (As per IS: 2818: 1971 (part 2): Latest) 229 at 16 % contract regain (As per IS: 2818: 1971 (part 2): Latest), 305 at 16 % contract regain (As per IS: 2818: 1971 (part 2): Latest), 213 at 16 % contract regain (As per IS: 2818: 1971 (part 3): Latest), 270 at 16 % contract regain (As per IS: 2818: 1971 (part 3): Latest), 213 at 14 % contract regain (As per IS: 2818: 1971 (part 4): Latest), 270 at 14 % contract regain (As per IS: 2818: 1971 (part 4): Latest), 298 at 16 % contract regain (As per IS: 2818: 1974 (part 5): Latest), 245 at 16 % contract regain (As per IS: 2818: 1977 (part 6): Latest) 1/3 DIMENSIONS Approximate Length of cloth in a lot or roll (cm) As per buyers requirements - Width 101.5 101.5, 114.5 Quantity supplied shall not exceed the quantity ordered Yes - PACKING Packing Lot - TEST REPORT Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. Yes - Name of the Lab Polyfab Pvt Ltd - Address of The Lab Delhi - Test Report No. 224587 - Test Report Date 01/01/2002 - Test Report to be furnished to buyer on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 N Abdul Jaleel 744101, SECRETARY, PORT BLAIR MUNICIPAL COUNCIL, INDIRA BHAWAN, MOHANPURA 11050 15

precast concrete pipe, rcc spun pipe Experience with Gov. Required 5 Year (s) Precast Concrete Pipe, Rcc Spun Pipe ( 547 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conform to Indian Standard IS: 458 Latest YES - ISI marked false Construction Type Reinforced Concrete Pipe Reinforced Concrete Pipe, Unreinforced Concrete Pipe Process of Manufacturing Spinning Process Spinning Process, Vibrated Casting Process Type of Joint Collar Joint Spigot and Socket Joint, Internal Flush Joint, External Flush Joint, Collar Joint Gasket Provided false Collar Provided true Cement Conform To IS 1489(Part 1) Conform to IS 269, Conform to IS 455, Conform To IS 1489(Part 1), Conform To IS 1489(Part 2), Conform To IS 8041, Conform To IS 8043, Conform To IS 8112, Conform To IS 1/3 12269, Conform To IS 12330 Class Class NP1 NP1, NP2, NP3, NP4, P1, P 2, P3 Dimension Length of Pipe (Metre) 2.0 2.0 Internal Diameter of Pipe (mm) 100 As per GeM Catalogue. Test Report Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - Test Report No 12646 - Test Report Date 15102017 - Name of the Lab QUALITY MARKING AND TESTING LABORATORY - Address of the Lab BHILAI - Test report to be furnished to the buyer on demand YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dinesh Kumar 491001, divional forest office, panch building, jail road Durg 547 15

precast concrete pipe, rcc spun pipe Experience with Gov. Required 5 Year (s) Precast Concrete Pipe, Rcc Spun Pipe ( 513 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conform to Indian Standard IS: 458 Latest YES - ISI marked false Construction Type Reinforced Concrete Pipe Reinforced Concrete Pipe, Unreinforced Concrete Pipe Process of Manufacturing Spinning Process Spinning Process, Vibrated Casting Process Type of Joint Collar Joint Spigot and Socket Joint, Internal Flush Joint, External Flush Joint, Collar Joint Gasket Provided false Collar Provided true Cement Conform To IS 1489(Part 1) Conform to IS 269, Conform to IS 455, Conform To IS 1489(Part 1), Conform To IS 1489(Part 2), Conform To IS 8041, Conform To IS 8043, Conform To IS 8112, Conform To IS 1/3 12269, Conform To IS 12330 Class Class NP1 NP1, NP2, NP3, NP4, P1, P 2, P3 Dimension Length of Pipe (Metre) 2.0 2.0 Internal Diameter of Pipe (mm) 100 As per GeM Catalogue. Test Report Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - Test Report No 12646 - Test Report Date 15102017 - Name of the Lab QUALITY MARKING AND TESTING LABORATORY - Address of the Lab BHILAI - Test report to be furnished to the buyer on demand YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dinesh Kumar 491001, divional forest office, panch building, jail road Durg 513 15

galvanized steel chain link fence fabric Experience with Gov. Required 5 Year (s) Galvanized Steel Chain Link Fence Fabric ( 3698 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conform to Indian Standard IS:2721-2003 Latest - CONSTRUCTIONAL Type of Selvage Both ends of the fabric knuckled( Fig 1C of IS 2721-2003) Both ends of the fabric knuckled( Fig 1C of IS 2721-2003) Mesh Size, (mm) 100±5 100±5 Nominal Diameter of Mesh Wire (mm) 3.15±0.05 3.15±0.05 Length of Fabric (Metres) 15 - Width of Fabric (Metres) 1.5 - Diameter of Line Wire (mm) 3.15±0.05 - Number of Line Wires 3 Nos above 2 Metres width - Heavy Coated Galvanizes Line Wire coform to IS 2721/2003 and IS: 280/2006 Yes - Minimum Weight per Square Metre of Galvanized Steel Chain 2.4 - 1/3 Link Fence Fabric (Kg) CERTIFICATION ISI Marked false - BIS Licence No. - - Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - Test report to be furnished to the buyer on demand YES - Test Report No and Date - - Name of the Lab - - Address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dinesh Kumar 491001, divional forest office, panch building, jail road Durg 3698 15

galvanized steel chain link fence fabric Experience with Gov. Required 5 Year (s) Galvanized Steel Chain Link Fence Fabric ( 3125 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conform to Indian Standard IS:2721-2003 Latest - CONSTRUCTIONAL Type of Selvage Both ends of the fabric knuckled( Fig 1C of IS 2721-2003) Both ends of the fabric knuckled( Fig 1C of IS 2721-2003) Mesh Size, (mm) 100±5 100±5 Nominal Diameter of Mesh Wire (mm) 3.15±0.05 3.15±0.05 Length of Fabric (Metres) 15 - Width of Fabric (Metres) 1.5 - Diameter of Line Wire (mm) 3.15±0.05 - Number of Line Wires 3 Nos above 2 Metres width - Heavy Coated Galvanizes Line Wire coform to IS 2721/2003 and IS: 280/2006 Yes - Minimum Weight per Square Metre of Galvanized Steel Chain 2.4 - 1/3 Link Fence Fabric (Kg) CERTIFICATION ISI Marked false - BIS Licence No. - - Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - Test report to be furnished to the buyer on demand YES - Test Report No and Date - - Name of the Lab - - Address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dinesh Kumar 491001, divional forest office, panch building, jail road Durg 3125 15

galvanized steel chain link fence fabric Experience with Gov. Required 5 Year (s) Galvanized Steel Chain Link Fence Fabric ( 3698 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conform to Indian Standard IS:2721-2003 Latest - CONSTRUCTIONAL Type of Selvage Both ends of the fabric knuckled( Fig 1C of IS 2721-2003) Both ends of the fabric knuckled( Fig 1C of IS 2721-2003) Mesh Size, (mm) 100±5 100±5 Nominal Diameter of Mesh Wire (mm) 3.15±0.05 3.15±0.05 Length of Fabric (Metres) 15 - Width of Fabric (Metres) 1.5 - Diameter of Line Wire (mm) 3.15±0.05 - Number of Line Wires 3 Nos above 2 Metres width - Heavy Coated Galvanizes Line Wire coform to IS 2721/2003 and IS: 280/2006 Yes - Minimum Weight per Square Metre of Galvanized Steel Chain 2.4 - 1/3 Link Fence Fabric (Kg) CERTIFICATION ISI Marked false - BIS Licence No. - - Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - Test report to be furnished to the buyer on demand YES - Test Report No and Date - - Name of the Lab - - Address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dinesh Kumar 491001, divional forest office, panch building, jail road Durg 3698 15

classroom chairs Experience with Gov. Required 1 Year (s) Classroom Chairs ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Chair Type Without Arms Without Arms Type of Seat and Backrest 18 mm thick prelaminated Particle Board 18 mm thick prelaminated Particle Board Depth of Seat in mm (+/- 10 mm) 380 - Height of Seat in mm (+/- 10 mm) 460 - Width of Seat in mm (+/- 10 mm) 380 - Overall Chair Height in mm (+/- 10 mm) 900 - SEAT DETAILS Thickness of Cushion Used in Seat in mm (+/- 2 mm) No Cushion - Density of Cushion Used in Seat (Kg/Cubic Metre) No Cushion - Material of Fabric of Seat Cover No Cusihion No Cover - BACKREST DETAILS Density of Cusion Used in Backrest (Kg/Cubic Metre) No Cushion - 1/3 Thickness of Cushion in Backrest in mm (+/- 2 mm) No Cushion - Material of Fabric of Backrest Cover No ciushion no cover - Width of Backrest (mm) 400 - Height of Backrest (mm) 300 - SUPPORT/UNDER STRUCTURE Frame Material Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum Under Storage provided below the Seat NO - Material of under storage NA - Length of Under Storage (mm) NA - Width of Under Storage (mm) NA - DEPTH of Under Storage (mm) NA - WRITING PAD DETAILS Writing Pad Material N.A - Writing Pad Size (Length X Width in mm) NA - MISC Colour of Fabric for Seat and Backrest No Fabric - Finishing of Structure Stove enameled Paint - WARRANTY Warranty period in number of years 1 1 CERTIFICATION Test reports to be furnished to buyer on demand YES - Product having BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Rekha Ranawat 307001, Govt, girls College, SIROHI, RAJASTHAN, 307001 100 15

Classroom tables Experience with Gov. Required 1 Year (s) Classroom Tables ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Mode of supply Assembled ready to use Assembled ready to use, Knocked down to be assembled at Consigning site by the seller, knocked down to be assembled at consignee site by consignee himself Shape of the table Rectangular Rectangular, Oval, Squar e, Round Style of table Supported by set of Legs Supported by set of Legs, Supported by pillars, Trestle type (with a plank top & vertical planks on the side), Fixed table supported by single column, Fixed stool supported by pedestal Design of table With four legs and Foot rest in square shape With four legs only, With four legs and cross leg members, With four legs and Foot rest ring, With four legs and Foot rest in square 1/5 shape, With four legs and Foot rest in rectangular shape, Other design Loading capacity of table top in KG ( ±5 Kg) 200 kg - Foot Rest Provided YES - Approval of Advance sample (in respect of design) Yes - MATERIAL Table Top Material Prelaminated Particle Board As per GeM Catalogue. All side Beeding on edges of table top 1.5 mm thick PVC tape with the help of hot melt glue - Shoes Material Rubber - Padestal (Under structure) MS square pipe of 25 mm with wall thickness of 1.02 mm (18 gauge) Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Mild steel rectangular section of out side minimum 30 mm X 20 mm & Wall thickness minimum 1.2 mm, MS square pipe of 25 mm with wall thickness of 1.02 mm (18 gauge), 25 mm x 50 mm (wooden), 50 mm x 50 mm (wooden), N.A Foot Rest Material Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm - Frame material MS square pipe of size 25 mm with wall thickness of 1.02 mm (18 gauge) MS square pipe of size 25 mm with wall thickness of 1.02 mm (18 gauge), MS pipe heavy duty, Stainless steel SS 304, Teak wood, Other wood, No frames Leg material MS square pipe of 25 mm with wall thickness of 1.02 mm (18 gauge) Teak wood, Steel flat SS 304, Steel pipe SS 304, 25 mm MS pipe heavy duty, MS square 2/5 pipe of 25 mm with wall thickness of 1.02 mm (18 gauge), No leg - supported by external sides DIMENSION Table Top Length ±10(mm) 700 mm 700 mm, 750 mm, 800 mm, 850 mm, 900 mm, 950 mm, 1000 mm Table Top Width ±10(mm) 470 mm 470 mm, 500 mm, 525 mm, 550 mm, 575 mm, 600 mm, 625 mm, 650 mm Table Height ±10(mm) 750 mm 700 mm, 725 mm, 775 mm, 825 mm, 850 mm Table top thickness 18 mm 1.2 mm, 1.6 mm, 2 mm, 3 mm, 5 mm, 13 mm, 18 mm, 20 mm, 25 mm, 36 mm MISCELLANEOUS Connecting of leg Adjacent side of leg Cross type, Adjacent side of leg, Only two leg members widthwise and one leg member to adjoining each other - with 100 mm ground clearance, N.A Number of buffers No buffers - Welding Joint To be smooth finished - Sharp edges to be removed -Free from objectionable projection or irregularities - Top to be fitted By Round head nut and bolt inside the sunmica - Tightend fully and ends of the bolts to be neatly burred over - Number of Bolt 2 bolt in length side and 1 bolt in width side - Size of Bolt 4 mm dia - Placements of Nut and Bolt N.A - Iron parts N.A - Table placed on even surface Not to wobble - Distance between legs N.A - COLOUR & FINISH Table top finish As per Buyer's choice - Paint/Polish Stove enameled Paint - 3/5 Colour of Paint black - CERTIFICATION Test reports to be furnished to buyer on demand YES - BIFMA certification YES - OEM of offered product is ISO 9001:2015 certified YES - OEM of offered product is ISO 14001:2015 certified YES - OEM of offered product is ISO 18001:2007 certified YES - Green guard certification NO - WARRANTY WARRANTY PERIOD 1-year 1-year, 2-year, 3-year * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rekha Ranawat 307001, Govt, girls College, SIROHI, RAJASTHAN, 307001 100 15

plastic moulded chair Experience with Gov. Required 1 Year (s) Plastic Moulded Chair ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR SINGLE PIECE PLASTIC MOULDED SINGLE PIECE PLASTIC MOULDED Seat cushion Without Without Back Cushion Without Without Conformity to Indian Standard IS 13713- Latest true - Plastic Material POLYPROPELENE POLYPROPELENE ARMS With arms With arms DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 455 As per GeM Catalogue. Seat Depth in mm (+/- 5 mm) 450 As per GeM Catalogue. Chair Height in mm (+/- 10 mm) 500 As per GeM Catalogue. Chair Dimensions Conforming To IS 3663 (Latest) - Weight of Chair (IN Grams) 3500 - Thickness of Polyurethane Foam Used in Seat in mm No Cushion 40, 45, 50, 55, 60, 65, 70, 7 5, No Cushion 1/3 (+/- 2 mm) Density of PU Foam in KG per CuM No Cushion 40, No Cushion Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) No cushion 40, No cushion PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) - Strength of the Chair Conforming To IS 5416 (Part 1) - Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% - UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table 1- Cycle Number 2 is more than 50 % Complied Minimum 50% tensile strength retained after exposure as per test - Support/Under Structure Support/Under Structure Sigle Moulded Piece No Support Structure SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure Support Structure Finishing Sigle Moulded Piece No Support Structure Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure CERTIFICATION Test reports to be furnished to buyer on demand YES - MISC Colour Dark Brown - WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1 * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Rekha Ranawat 307001, Govt, girls College, SIROHI, RAJASTHAN, 307001 50 15

Multifunction Machines

Multifunction Machines

PA Speaker PA Speaker ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Specifications Speaker Type Main Speaker Main Speaker, Woofer, Monito r Speaker, Tweeter Amplification Method Passive Speaker Passive Speaker, Powered Speaker If Powered, Amplifier Class NA - Configuration One Way One Way, Two Way, Three Way, Four Way Number of Speakers 1 1, 2, 3, 4 Frequency Response (Hz) 150-10, 000Hz - Low Frequency Unit with Size in Inches NA - High Frequency Unit with Size in inches NA - Sound Pressure Level (SPL) (1W/1m) (dB) 91.5 - Coverage Pattern 20 x 10 - Maximum Level Sound Pressure Level (dB) 91.5 - 1/3 Nominal Impedance (Ohm) 15 - Speaker Port Ported - Side Handles Yes - Connectors Stripped Cable Socket - Enclosure Aluminium Sheet - Mounting Wall Mount - LED Indicators No - BIS Registration Number under CRS of Meity for Powered Speaker - - Dimensions (H x W x D) (mm x mm x mm) - - Weight (Kg) 2.73 - Power Rating (Watt) 15 - AC Power Input 230V ~ 50/60 Hz - Warranty (Years) 1 1, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Geeta Sharma 304001, Govt. College, Tonk Bahir Road, Tonk 4 15

Multimedia Projectors

Air Conditioner Air Conditioner ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/GENERIC Type of Air conditioner High wall Split AC High wall Split AC Technology of AC Inverter (Variable Speed) Inverter (Variable Speed), Non- Inverter (Fixed Speed) Nominal cooling capacity in Ton (kcal/hr) 1.5 Ton/4500 kcal/hr 1.5 Ton/4500 kcal/hr Coil Material Copper Aluminium, Copper Eco-friendly refrigerant true Minimum length of copper pipe and suitable connecting electrical cable for installation and commissioning 3 metre - Packing LIst INDOOR + OUTDOOR - Any other Features QUIET OPERATION - CONFORMITY CERTIFICATION BEE Star Rating 5 1, 2, 3, 4, 5, NA Conformity to Indian Standard IS 1391 latest - WARRANTY Warranty on Machine 1 1, 5 1/3 Warranty on Compressor 5 5, 6, 7, 8, 9, 10 INSTALLATION Installation and commissioning Without Installation and Commissioning With Installation and Commissioning, Without Installation and Commi ssioning, Installation and Commissioning at Extra Cost as offered by the seller seperately on GeM * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shiv Nuwal 311604, Kota - Bhilwara Road Mandalgarh 8 15

laundry soap Laundry Soap ( 15000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 285:Latest Yes - ISI Marking No Yes, No CML Number NA - Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes Yes, No Test Report Number 7845/18-19 - Test Report Date 01/05/2018 - Name of the Lab GOVERNMENT LAB - Address of the Lab CHENNAI - Type and Fragrance Type Type 1 (Pure Soaps) Type 1 (Pure Soaps), Type 2 (Built Soaps) Grade 1, Type 2 (Built Soaps) Grade 2 Fragrance STANDARD - Weight and Packing Weight of Bar/Cake (gms) 250 250 Number of Bars in a 12 1/2 Pack (Nos) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 N Abdul Jaleel 744101, SECRETARY, PORT BLAIR MUNICIPAL COUNCIL, INDIRA BHAWAN, MOHANPURA 15000 15

Multifunction Machines

tractors

Video Recorder for CCTV System Video Recorder For CCTV System ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type of Recording Device NVR NVR, DVR, Hybrid Video Recorder (HVR) IP Camera Support true PTZ Camera control Support true Housing construction Plastic Alluminium, Plastic Mounting Rack Mounted - Rack Mount configuration 4U - Capability of Recorder to Work with Other Makes of CCTV Cameras (ONVIF support) true - VIDEO Number of Video Input Channels 16 4, 8, 16, 32, 64, 128, 256 Number of Non-IP based Video input Channels for HVR NA 4, NA Number of IP based Video input Channels for HVR 16 4, NA Number of Video 2 1, 2, 4, 64 1/7 Output Channels Recording Resolution Full HD (1920 x 1080) D1 (704 x 480), HD (1280 x 720), Full HD (1920 x 1080), 4K (3840 × 2160) Supported Compression Technique H.264, H.265, MPEG-4, MJ PEG, H.265+, H.264+ - Maximum Number of cameras to be viewed on a single display 16 - Total number of simultaneous local views 2 - Simultaneous Monitoring Connections for All Cameras (Users in Local Network for Client Connection) 16 - Recording Speed for all channels (fps) 25 - Minimum Through put (Mbps) 96 - Display Image Rate Real time per channel - AUDIO Audio Support true - Audio Input 16 - Audio Output 1 - Audio Compression G.726, G.711, G.722.1, A- Law, U- Law, MP2L2, AAC, NA - Minimum Number of Simultaneous Channels for Two-way Audio Support 8 - SECURITY Type of Encryption HTTPS (SSL/TSL), HTTP ( SSL/TSL), WPA, WPA2, TK IP, NA - Multi Level User ID Password Yes - ALARM Alarm Support true - Alarm Input 16 - Alarm Output 1 - Pre/Post Alarm Buffer true - Pre-Alarm Recording 60 - Post-Alarm Recording 60 - 2/7 Video Content Analytics (VCA) Trip-wire Detection, Motion Detection, Crossing line, Intrusion Detection, Face Recognition, Object cou nting, Tampering, Object Removal, Number Plate Recognition, NA - NETWORK PROTOCOLS INTERFACE OPERATING SYSTEM Operating System Supported Windows, MAC, Linux - Supported Network Protocols UDP, SNMP, IGMP, DHCP, RTP, RSTP, HTTP, HTTPS, DNS, DDNS, RTSP, RTCP, NTP, UPnP, SMTP, FTP, IC MP, QoS, TCP/IP, NA (for DVR) - Supported Interface Ethernet, Wifi, HDMI, VGA, CVBS, Bluetooth, USB, R S 232, RS-422, RS-485 - Physical Layer of Ethernet 10/100/1000 Base TX, NA - Number of Ethernet Ports 1 - Number of HDMI Ports 1 - Number of VGA Ports 1 - Number of CVBS Ports 0 - Number of USB Ports 2 - Number of Serial Ports 0 - Number of PoE Ports 1 - Supported SIM Slot NA - Number of SIM Slots 0 - FEATURES Video Loop Support true - Video Recorder supports recording on NAS Directly true - Remote Administration (Remote Configuration And Status Using Web Based Tool) true - System Update (Remote System Update Over Network Using Web Client) true - PC Client (PC Application Client With A Channel Recording Feature Support) true - 3/7 Web Client (Viewer through HTTP system configuration) Yes - On Screen Display (In English) true - Drivers/Compatible Software (Wherever Applicable) Part Of Supply Yes - Recording schedule support Yes - Bandwidth Control Yes - Camera Notification Spot (POP up Window) on Event, SMS, E-mail - Network transmission Speed Real time display @ D1 resolution - Other features, if any - - PLAYBACK/VIEW MANAGEMENT Search Date, Time, Event, Log, M otion, Bookmarks - Bookmarks Forward, Backward, adju stable playback speed, Full Screen, Next Camera, Previous Camera, Repeat - Page preview Multi Monitor Support, Video Window, Electronic Map on two separate monitors - Total Management Group add, Delete, Group management - Camera Add, Edit, Use Master account, Use Specific account - STORAGE Internal Hard Drive Interface SATA I - Number of Hard Disks (inclusive in the scope of supply) 1 - Storage Capacity of each Hard Disk (TB) 4 - Total Storage Capacity(TB) 4 - Internal Storage Expandable upto (TB) 16 - Number of Hard Disks supported 1 - 4/7 Redundancy Option RAID 1 - POWER SUPPLY Power Input 230 ± 10%, 50Hz, 12 V DC, 24 V DC - Power Consumption 12 - Suitable Adapter to be Supplied to Make the Equipment Work on 230 V ± 10 %, 50 Hz Yes - Redundant Power Supply true - OPERATING CONDITIONS Minimum Operating Temperature 0 - Maximum Operating Temperature 55 - Relative Humidity Non Condensing at 40 deg C 80 - WARRANTY/SERVICES Warranty 2 1, 3, 5 Time for Replacement of Defective Product During Warranty Period 96 12, 24, 36, 48, 72, 96 ENVIRONMENTAL CERTIFICATION Availability of facility and infrastructure for verification of all the parameters, features and capability with the Seller true - Conformity to Dry Heat test at Specified Maximum Operating Temperature for 16 hours as per IS :9000 latest true - Conformity to Damp heat at 40 degree C - 95% RH (cyclic test): two cycles of 16+8 hours as per IS: 9000 latest true - Conformity to Cold test at Specified Minimum Operating Temperature for 4 hours as per IS: 9000 latest true - BIS Registration for safety general requirements as per IS: 13252 (Part 1): latest true - 5/7 Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification - - Test Report Number and Date - - Name and Address of Test Lab - - Certification FCC, CE, UL, CB, CSA, NIL - LIST OF ITEMS List of Items and Quantity of each item included in the offer - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shivsharan Arjunrao Shirale 431401, Station Road Near District Court 1 15

hopper or tipper Average Turn Over of Last 3 Years 100 Lakh (s) Experience with Gov. Required 3 Year (s) Hopper Or Tipper ( 9 ) Technical Specifications Specification Specification Name Values Allowed Values * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pramod Annasaheb Thorat 431513, Hingoli- Akola Highway 9 15

All in one All In One ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel - Processor Generation 7th 6th, 7th, 8th Processor Intel Core i5-7400 (3.0 GHz, 6 MB Cache, 4 Cores) As per GeM Catalogue. Chipset Chipset Intel H110 - Graphics Graphics type Integrated - Graphic Card Description INTEL INTEGRATED GRAPHICS - Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 1000 500, 1000, 2000 Hard disk drive speed (RPM) 7200 - RAM Type of RAM DDR4 - RAM Size (GB) 4 4, 8, 16, 32 RAM Expandability Upto (GB) 16 8, 32, Not-Available Ram speed (MHz) 2400 - Operating System Operating system Windows 10 Windows 10 1/3 Professional Home, Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows - Display Display Size (Inch) 19.5 19.5 Type of Display Non Touch Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes - Ports USB Port 2.0 (No.) 2 - USB Port 3.0 (No.) 2 - VGA Port Not-Available - HDMI Port Available - Thunderbolt Port (No.) Not-Available - Display Port Not-Available - Input Devices Keyboard Standard with USB Interface - Mouse Optical Scroll with USB Interface - Audio Integrated Stereo Sound with internal speakers & Mic. - Connectivity Wi-fi Connectivity 802.11 ac - Bluetooth Connectivity 4.0 or higher - LAN Port Integrated Gigabit Ethernet 10/100/1000 - Certification BIS Registration under CRS of Meity Yes - BIS Registration no - - Certifications Available Energy Star - ROHS Compliance Yes - Power Maximum Wattage (Watts) 180 - Power Efficiency (%) Minimum 80 - Others Webcam Full HD - DVD R/W Available - 2/3 Optical drive Integrated - Stand Height Adjustable - On Site OEM Warranty (Year) 3 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 RAJENDRA KUMAR SINGHVI 312601, Chittorgarh Road, Nimbahera 4 15

hopper or tipper Average Turn Over of Last 3 Years 300 Lakh (s) Experience with Gov. Required 3 Year (s) Hopper Or Tipper ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/6 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 21.5 Speed, Max (Km/Hr) 60 - Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Tube - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - 2/6 ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 2.5 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 5 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 4 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2165 - Tipper Body Height (mm) 672 - Overall Height of Tipper from Ground (mm) 1491 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 3 Pneumatic System true - Hydarulic System true - 3/6 Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation true - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 354 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter true - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/6 1 Dattatray Namdeo Kadam 413716, Deolali Pravara Municipal Council, Deolali Pravara Tal - Rahuri Dist- Ahmednagar 1 15

Desktops, Online UPS, Printer Experience with Gov. Required 1 Year (s) Desktops ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel, AMD Processor Generation 7th 6th, 7th, 8th Processor Intel Core i3-7100 (3.9 GHz, 3 MB Cache, 2 Cores) As per GeM Catalogue. Motherboard Chipset Intel Q170 As per GeM Catalogue. Expansion Slots (PCIe x 1) (Number) 0 - Expansion Slots (PCIe x 4) (Number) 0 - Expansion Slots (PCIe x 16) (Number) 0 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre-Loaded) Windows 10 Home Windows 10 Profession al, Linux, DOS, Windows 10 Home, Windows 10 Professional under Microsoft Shape the Future Program RAM Type of RAM DDR 4 - 1/7 RAM Size (GB) 4 4, 8, 16, 32 RAM Expandability upto (GB) 16 16, 32, 64 RAM Speed (MHz) 2133 - Storage Hard Disk (GB) 1000 500, 1000, 2000 Cabinet Cabinet Tower - Cabinet Volume (Litres) 5 - Internal Bays 1 - External Bays (Number) 0 - DIMM Slots (Number) 2 - Connectivity Wireless Wi-Fi 802.11ac + Bluetooth - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 4 - USB Port 3.0 (Number) 0 - Serial Port true - Parallel Port true - VGA true - HDMI false - Display Port true - Monitor Monitor Size (INCHES) 18.5 18.5, 19.5, 21.5, 24, 27 Monitor Resolution (PIXELS) 1366x768 1366x768, 1920x1080, 3 200x1800, 3840 x 2160, 1440 x 900, 1600 x 900 Monitor Certification TCO 6.0 - Power Power Supply (Watt) Input voltage, 100 VAC — 240 VAC. Input frequency, 50 Hz–60 Hz - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model false - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive DVD R/W - Internal Speaker false - 2/7 On Site OEM Warranty (Year) 3 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishal Sheshrao Hiwale 444203, Municipal Council Administrative Building, Main Road, Gandhi Chauk, Shegaon 10 15 Online UPS ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA (KVA) 1.0 KVA As per GeM Catalogue. Technology IGBT-PWM with inbuilt isolation transformer MOSFET-PWM with inbuilt isolation transformer, IGBT-PWM with inbuilt isolation transformer, IGBT-PWM without inbuilt isolation transformer Input Power Three phase 300 V - 450V sinewave, 50Hz single phase 160V - 260V sinewave, 50Hz, Three phase 300 V - 450V sinewave, 50Hz Output power Single phase 230V +/-1% sinewave 50 Hz Single phase 230V +/-1% sinewave 50 Hz, 3 Phase 400V +/-1% with alternative user setable setting of 380V +/-1% 50 Hz Backup time (Minutes) 30 15, 30, 60, 90, 120, 180, 2 40 Minimum VAH (VAH) 850 Warranty for UPS (Years) 3 1, 2, 3, 4, 5 Movable trolly for Batteries Without With, Without, Without trollery but with rack Warranty for battery 1 1, 2 Degree of Protection IP20 IP21, IP20 Cabling 5 meters for input and out put With With, Without Paralleling kit for Without With, Without 3/7 synchronising Installation and Commissioning Yes - CONSTRUCTIONAL Minimum thickness of M.S.Sheet Enclosure duly painted (mm) 1.2 - Type of Battery SMF-VRLA conforming to JISC:8702(Pt.I, II&III) - FUNCTIONAL Maximum overshoot and Under shoot of output rated voltage 4 - Voltage Regulation from no load to full load (%) </= 3% - 20% Overload limit for minimum 10 minutes Yes - Overall Efficiency (%) >/=90% - Total Harmonic Distortion(THD) (%) Maximum 3% - 50% Overload limit for minimum 1 minutes Yes - PROTECTION Protection for under voltage at battery terminal at 10.5V per 12 V battery. Yes - Protection of Over voltage, Short Circuit & over load at UPS output terminal Yes - METERING AND INDICATIONS Digital Metering in UPS for AC Input Voltage, Output AC Volt age, Current, Frequency, Battery Voltage and Current Yes - Indicators for mains presence, Battery charging and discharging, Output Over Load, Low Battery Voltage Yes - REPORTS AND CERTIFICATION Damp Heat : in accordance with IS:9000(part 5/sec.2)1981 at Temperature of 40 degree C, two cycles of (12+12) hours each 2007) Yes - 4/7 Dry Heat Test : in accordance with IS:9000 (part 3/sec.5)1977 (reaffirmed 2007) at 55 degree C for 16 hrs Yes - Cold Test : in accordance with IS:9000 (Part 2/Sec.4)1977 (Reaffirmed 2007) at -10 degree C for 4 hrs. Yes - Availability of the Type Test Report from Central Govt. NABL/ILAC Accredited lab covering all technical requirements. Yes - Type Test Certificate No. - - Type Test Certificate date 03/02/18 - Name of Lab Bio marking testing service - Address of Lab dehli - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishal Sheshrao Hiwale 444203, Shegaon 20 15 Printer ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values Specifications Printing Technology Laser inkjet, Laser Cartridge Technology composite composite, separate toner and drum, Ink 5/7 Type of printing mono mono, Colour Paper Size A4 A4, A3 Print Speed (A4) - Mono (PPM) 30 Print Speed (A4) - Color (PPM) 0 Resolution (Dpi) 2400dpi × 600 dpi - Memory (MB) 8 - Hard Disk Capacity (GB) 0 - Processor Speed (Mhz) 0 - Duplexing Feature yes - Duplex Print Speed (PPM/IPM) 7.5 Network Connectivity No - Network Interface, if available NA - Wireless Connectivity No - If Yes, Type of Connectivity NA - USB Port yes - Paper Tray Capacity 250 - Number of Paper Trays 1 - Yield of Cartridge/Ink Tank/Ink Pack supplied with printer(Per Set) 1 - Life of Drum in terms of number of Prints in case of Separate Drum and Toner cartridge technology (No of Prints ) 2600 - Duty Cycle/month (No of Prints) 2600 - Operating Temperature Range (Degree C) 10 to 32 °C - Operating Humidity (RH) (In %) NA - Dimensions(In mm x mm x mm ) 356*183*360 - Weight (In kg) 6.8 - BIS Registration under CRS of Meity Yes - BIS Registration no - - 6/7 On site OEM warranty (Years) 1 1, Shegaon 10 15

Class Room Desking and Seating Class Room Desking And Seating ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING ONLY TABLE/DESK ONLY TABLE DESK, ONLY SEATING, INTEGRATED DESK CUM SEATING, INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK, ONLY TABLE/DESK WITH SHELF/STORAGE UNDER DESK Desking Configuration SINGLE SEATER SINGLE SEATER, TWO SEATER, THREE SEATER, FOUR SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 600 As per GeM Catalogue. DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18 mm thick prelaminated Particle Board As per GeM Catalogue. Material of Support Structure or Side Pannel Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mm As per GeM Catalogue. 1/4 Height of Desk Top in mm (±5 mm) 700 As per GeM Catalogue. Width of Desk Top in mm (± 5 mm) 450 As per GeM Catalogue. SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) ONLY DESK NO SEATING 12 mm Thick Plywood Only, 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 18 mm thick prelaminated Particle Board, 25 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, 19mm thick Commercial Block Board BWP grade Conforming to IS 1659, 19mm thick Decorative Block Board BWP grade Conforming to IS 1659, 19mm thick Commercial Block Board MR Grade Conforming to IS 1659, 19mm thick Decorative Block Board MR Grade Conforming to IS 1659, 25mm thick prelaminated plywood having 0.8 mm (± 0.2mm) thick prelaminated sheet, ONLY DESK NO SEATING Material of Support Structure ONLY DESK NO SEATING As per GeM Catalogue. Material of Seat Cushion ONLY DESK NO SEATING 40 mm thick PU foam of density 40 gram per cubic cm, WITHOUT 2/4 CUSHION, ONLY DESK NO SEATING Width of Seating in mm (±10 mm) ONLY DESK NO SEATING As per GeM Catalogue. Height of Seat in mm (±10 mm) ONLY DESK NO SEATING As per GeM Catalogue. Width of backrest if provided in mm (± 5 mm) No Backrest As per GeM Catalogue. Back Support for Seating of Same materail as Seating back support not provided Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) Can be configured as per buyer's choice within offered technical details - Colour of finish brown - Desk top finishing All sides Edge to be banded with PVC tape of 2 mm thick with help of hot melt glue - Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) NA - WARRANTY Warranty period in number of years 2 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 DEVA RAM 312601, Chittorgarh Road, Nimbahera 200 15

hopper or tipper Hopper Or Tipper ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Garbage Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 702 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as 21.5 1/5 certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 60 - Main Engine Aspiration Natural Aspiration Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Gradeability of Vehicle with load( %) 16.38 - Gradeability of Vehicle without load ( %) 18 - Ground Clearance (mm) 160 Wheel Base (mm) 2100 - Kerb Weight (Kg) 720 Gross Vehicle Weight (Kg) 1700 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 4 - Type of Steering Manual Manual, Power Operated Turning Radius, Min (mm) 4300 Speed Governers No - ABS Fitted No - 2/5 Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 2 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 3800 - Width of Chassis (mm) 1500 - Height of Chassis (mm) 1845 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 12 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2165 - Tipper Body Height (mm) 670 - Overall Height of Tipper from Ground (mm) 1489 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 4 Pneumatic System false - Hydarulic System true - Tipping Hydraulic - - 3/5 Cylinders(Make) Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 352 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/5 1 Ram Milan Panday 471311, Near Stadium Badamalhara 3 50

Gel Pen

Desktops

Desktops

Compressed Oxygen Gas and Liquid Oxygen for Industrial use Compressed Oxygen Gas And Liquid Oxygen For Industrial Use ( 16 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conforming to Indian Standards IS:309 Latest Yes - ISI Marked true BIS Licence No 7617783 - Item Item Compressed Oxygen Gas Compressed Oxygen Gas, Liquid Oxygen Parameter Oxygen gas is produced by Air Separation Process true Purity Minimum 99 percent by volume when tested in gaseous form - Packing Packing Size Compressed Oxygen in 6-8 cubic Metre Capacity with Non returnable Cylinders Compressed Oxygen in 6-8 cubic Metre Capacity with returnable Cylinders, Compressed Oxygen in 6-8 cubic Metre Capacity with Non returnable Cylinders, Liquid Oxygen in returnable Insulated Tanker Packing and Marking as per Clause 5 of IS Yes - 1/3 309/2005 or latest Test Report Availability of Test Reports of from Central Govt./State Govt/NABL/ILAC accredited Lab to prove conformity to the Specification Yes - Test Report No 1.18 - Test Report Date 24012018 - Name of the Lab Bureau of Indian Standard - Address of the Lab Rajkot - Test report to be furnished to the buyer on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Devendra Rathour 110045, PALAM DABRI ROAD DABRI 16 15

LED Luminaire (For Road and Street Lights) Average Turn Over of Last 3 Years 5 Lakh (s) Experience with Gov. Required 2 Year (s) LED Luminaire (For Road And Street Lights) ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 3/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS:IS: 16103(Part-2)/2012 Type 3 - LED Rating (in Watts)/System Wattage/Rated Power 90W As per GeM Catalogue. Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - 1/7 Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP66 - Warranty for free replacement (in years) 2 2, 3, 4, 5 ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 90 to 300 Volts AC at 50 Hz+/-2 - Automatic Higher Cut off voltage above 300 volt Yes - Rated voltage 230 V AC 50 Hz - AC Power Factor at full load ≥ 0.95 - Driver Efficiency (in %age) Upto 100W: ≥85%, Above 100W: >/=90% Yes - Total Harmonics Distortion ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl. 8 of IS:16104:2012 lates)" Yes - OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000+/-500K - Working life for LED (Minimum 50, 000 burning hours as per LM-80 and LM 21 reports) Yes - Colour Rendering Index(CRI) ≥70 - LED Beam Angle ≥120 - Optic lense materal (UV stabilised) Poly carbonate lense - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Junctiojn/Soldering point temperature shall not exceed 85 deg.c as per LM 80 report Yes - 2/7 Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Operating temperature range -20 deg. C to +50 deg. C -20 deg. C to +50 deg. C, 10 deg C to +50 deg C, 10 deg C to +55 deg C Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M Ohm - The luminaire shall be protected against surges and transients ( Internal) >/=5KV - The luminaire shall be protected against surges and transients of >/=10KV (External) Yes - CONSTRUCTIONAL The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes - The luminaire body must be corrosion resistant powder coated Yes - All fastners must be of stainless steel Yes - Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest IP66 - 3/7 Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Yes - Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Light Source SMD LED Chip as per LM 80/IS16106 - Driver components shall be industrial grade or above Yes - PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes - Suitable connector shall be provided for LED connection between driver output and LED Yes - Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm 50 cm, 100 cm MARKING "Manufactures Name and and brand on the aluminium die cast body " Engraved/Embossed - 4/7 Manufacturer’s name, model number, serial number Yes - Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes - The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes - Diameter of pole Luminiare suitable for: (upto 45W Pole OD: shall be 40mm), (>45W<120W Pole OD: Shall be 50 mm), (above 120W: OD shall be 60 mm for which luminiare is suitable Yes - REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILEDS/PHILIPS SYSKA/LUMENMAX EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/REFOND - System must have EMI/EMC compliance as applicable (Test reports shall be furnish to the buyer/consignee on demand) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological Yes - 5/7 report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer consignee on demand (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller shall furnish the Type test reports to the buyer/consignee on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for road and street lighting shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 3): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ved Prakash 271001, nagar palika parishad gonda, faizabad road office 100 15

Class Room Desking and Seating Class Room Desking And Seating ( 9 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK Desking Configuration TWO SEATER SINGLE SEATER, TWO SEATER, THREE SEATER, FOUR SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 1500 1500, 1450 DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 25 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side As per GeM Catalogue. Material of Support Structure or Side Pannel Mild Steel square Section of size 25x25 mm and wall thickness As per GeM Catalogue. 1/4 minimum 1.6 mm Height of Desk Top in mm (±5 mm) 750 As per GeM Catalogue. Width of Desk Top in mm (± 5 mm) 650 As per GeM Catalogue. SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side 12 mm Thick Plywood Only, 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 18 mm thick prelaminated Particle Board, 25 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, 19mm thick Commercial Block Board BWP grade Conforming to IS 1659, 19mm thick Decorative Block Board BWP grade Conforming to IS 1659, 19mm thick Commercial Block Board MR Grade Conforming to IS 1659, 19mm thick Decorative Block Board MR Grade Conforming to IS 1659, 25mm thick prelaminated plywood having 0.8 mm (± 0.2mm) thick prelaminated sheet, ONLY DESK NO SEATING Material of Support Structure Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm As per GeM Catalogue. 2/4 Material of Seat Cushion WITHOUT CUSHION 40 mm thick PU foam of density 40 gram per cubic cm, WITHOUT CUSHION, ONLY DESK NO SEATING Width of Seating in mm (±10 mm) 600 As per GeM Catalogue. Height of Seat in mm (±10 mm) 750 As per GeM Catalogue. Width of backrest if provided in mm (± 5 mm) 300 As per GeM Catalogue. Back Support for Seating of Same materail as Seating Provided without cushion Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) YES - Colour of finish TEAK WOOD COLOUR - Desk top finishing Two long sides to be post form half round profile plus with corner edge bending and other two sides edge banded with 2 mm thick PVC tape with the help of hot melt glue - Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) 300 - WARRANTY Warranty period in number of years 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shailendra Khare 497001, Government Polytechnic Surajpur C G (Running in Government Polytechnic Ambikapur C G) 9 15

domestic microwave oven Domestic Microwave Oven ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 11676 (Latest) true ISI Marked false CML No. 1500 - Dimension Capacity/Volume (Litres) 28 28 Dia of turntable (mm) 326-350 326-350 Exterior Length (mm) 501-525 - Exterior Width (mm) 301-325 - Exterior Height (mm) 451-475 - Net weight (Kg) 25-26 - Parameter Grill Heating Power(Watts) 1801-2000 As per GeM Catalogue. Operating AC voltage (Volts) 211-220 - Heating time adjustment Pitch (seconds) 12 As per GeM Catalogue. Microwave frequency (MHz) 1400 1400, 1450, 1500, 2450 1/3 Maximum heating time (minutes) 2 - Microwave heating power (Watt) 2001-2250 As per GeM Catalogue. Warranty Unit Warranty (Years) 1 1, 2, 3, 4, 5 Magnetron and Cavity Warranty(Years) 1 1, 5, 6, 7, 8, 9, 10 Performance Convection heating true Touch contol pannel true Oven glass window Yes - Adjustment of microwave power true Finish of heating chamber Stainless steel Ceramic coated, Stainless steel Display of power On/Off Yes - Grill heating true Display for set heating time, present time and power Yes - Rotisserie rack true Door safety lock system Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Geeta Sharma 304001, Govt. College, Tonk Bahir Road, Tonk 2 15

Shoulder Builder/Arm Wheel- Outdoor Gym Equipment Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 1 Year (s) Shoulder Builder/Arm Wheel- Outdoor Gym Equipment ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Two Wheel Two Wheel, Three Wheel DIMENSIONS Height of Main Central Pole from ground 1600 - Outside Diameter of first wheel 800 - Outside Diameter of second wheel 850 - Outside Diameter of third wheel 850 - Height of first wheel from ground 1300 - Height of second wheel from ground 1200 - Height of third wheel from ground 1200 - MATERIAL Governing Specification for GI Pipes BIS specification No IS 1239 ( Part 1 )- 2004, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest 1/5 All the GI Pipes are ISI marked true Main Central Pipe construction 150mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Central Pipe, Class as per IS 1239 Heavy Medium, Heavy, Not applicable for pipe as per IS 1161 Designation of Main Central Pipe ( as per IS 1161 ) NA - Ring ( Wheel ) 40mm Nominal Bore G.I. Pipe 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe Ring ( Wheel ) Pipe, Not applicable for pipe as per IS 1161 Designation of Ring ( Wheel ) Pipe ( as per IS 1161 ) NA - Pipe of Spokes of Wheel 20mm Nominal bore G.I. pipe 15mm Nominal bore G.I. pipe, 20mm Nominal bore G.I. pipe Pipe of Spoke of Wheel, Not applicable for pipe as per IS 1161 Designation of Pipe of Spoke of Wheel ( as per IS 1161 ) Na - Number of Spokes in Wheel 6 - Connector Pipe ( between Main Central Pipe and Wheel ) 50 mm Nominal bore G.I. pipe 32 mm Nominal bore G.I. pipe, 40 mm Nominal bore G.I. pipe, 50 mm Nominal bore G.I. pipe Connector Pipe, Not applicable for pipe as per IS 1161 Designation of connecting pipe ( as per IS 1161 ) NA - MS Foundation Plate Thickness 12 10, 12 2/5 Foundation Pipes with anchoring 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 150mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Not applicable for pipe as per IS 1161 Designation of Foundation Pipe ( as per IS 1161 ) NA - Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Nuts and Bolts for Assembly G.I. - Knobs on the Wheel for Gripping Polyurethane - Movement must be supplied with bearings Yes - Bearings Tapered Roller Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Closing Caps of open ends of the pipes, bearings, bushes and base G I Caps - Thickness of closing caps ( min ) 3 - All Plastic Components U V stabilised, weather resistance - COLOUR Colour Yellow - Paint/Finish Powder Coated, UV resistant - Paint Coating Thickness ( min ) 80 - OTHER REQUIREMENTS Ergonomic Design Yes - There shall be no crushing or searing points for user between Yes - 3/5 moving and/or stationary parts of equipment during use Equipment shall be free from entrapments and sharp edges Yes - Installation Instructions must be provided Yes - Installation Included Included, Not Included Safety and quality Requirements European Standard EN 16630: 2015 latest - Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) As per European Standard EN 16630 As per European Standard EN 16630, No Registration No and Validity of Registration NA - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 2 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajnish Chandra Srivastava 335001, GOVERNMENT P.G COLLEGE, HINDUMALKOT ROAD, SRIGNGANAGAR 1 15

industrial vacuum cleaner Experience with Gov. Required 5 Year (s) Industrial Vacuum Cleaner ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values PERFORMANCE Vacuume level 200 Airflow rate (ltrs/Sec) 100 Suction Hose length 5 Floor Nozzle size 200 Power Supply 230 + 10 % VAC, Single Phase, 50 +/- 2 % HZ - Rated input power during operation 3 - Power Cord Length 10 - FILTER Filter Dust class as per EN 779:2012 Classification G1 - Filter Area(square meter) 0 - Filter clean operation Manual - MOTOR Number of Motors 1 - Power of Each Motors 1100 - RPM 0 - FEATURES Types of Cleaning Wet and Dry Duty - 1/4 operation Cleaning Provision Pneumatic Tool Running Automatically With Vacuum Yes - Pneumatic tools Running Power 1100 - Provision Power Tool Running Automatically with Vacuum Yes - Trouble free wet and dry pickup without having to stop to change filters dry mode to wet mode Yes - Storage facility and integrated accessories holder for tools No - Start and Stop auto switch on/off power tool Yes - Integral auto on-off System for pneumatic and electric tools No - GENERAL DETAILS Overall Dimension (LXWXH) NA - Net Weight 15 - Material Of the Body & Container HDPE - Container Capacity 40 Material of Flexible Hose Polypropylene - Noise Level 10 - OPERATING ENVIRONMENT Highest operating Temperature 30 - Lowest Temperature Range (Degree celsius) -10 - Usuability under Different weather condition NA - ADDITIONAL FEATURES Weather Proof Switches No - Overload Protection Yes - Spring Loaded Brushes Yes - Other Features NA - WARRANTY Warranty 1 1, 2, 3, 4, 5 2/4 ACCESSORIES Packing list NA - CERTIFICATION Availability of Test Report from Central Govt/NABL/ILAC acredited lab to prove confirmity to specification false - Test Report No and Date NA - Name and Address of the Lab NA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Baboo lal Bairwa 303503, Rajesh pilot govt.college shyampura road lalsot 2 15

Printer or photo Copier Paper Printer Or Photo Copier Paper ( 300 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297, 297 X 420 Size of the Paper A3 A4, A3 GSM of Paper 75 75, 80, 90, 95 Quantity Number of Sheets per Ream 500 500 Physical Characteristics Brightness in % 88 Tensile Index MD in Nm/g 45 - Tensile Index CD in Nm/g 30 - Opacity in % 90 - Tear Index (Avg) in Nm.m²/g 5.5 - Smoothness for both sides (Bendtsen) in 190 - 1/3 ml/min Thickness in µm 100 - Moisture in % 5 - Stiffness MD 3 - Stiffness CD 2 - Surface Strength Dennison (Wax Pick) >= 12 A 13A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Laxman Hanmanta Chalwadi 413001, Solapur Municipal Corporation, Computer Department, Dr.Babasaheb Ambedkar Chowk (Park Chowk) Solapur 300 15

bed sheets or spreads Bed Sheets Or Spreads ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Conforming to Indian Standard IS 175: 1989: Latest - Variety No as per BIS specification; Fibre content and Mass Variety No-2; 100 % cotton; 170 gms per sq.m Variety No-2; 100 % cotton; 170 gms per sq.m, Variety No-4; 100 % cotton; 145 gms per sq.m, Variety No-5; 48 % polyester & 52 % cotton; 155 gms per sq. m SIZE Length 240 215, 230, 240, 255, 275, 1 30 Width 150 135, 150, 175, 9 1 OTHER REQUIREMENTS Colour/Print Bleached, White Bleached, White, Dyed (assorted colours), Printed Weave Plain - PILLOW COVER Matching pillow cover Included 1 number for single bed sheet Included 1 number for single bed sheet, Included 2 number for double bed sheet, Not included 1/3 Size of pillow cover 50cm X 36cm 63cm X 45cm, 50cm X 36cm, Not Applicable, if pillow cover is not included TEST REPORT Availability of Test Report from NABL ILAC accredited or Central Government Lab to prove conformity of products to the specification. Yes Yes, No Name of the Lab na - Address of The Lab na - Test Report No. na - Test Report Date na - Test Report to be furnished to buyer on demand, if claimed to be available Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajveer Singh 313324, JILA PARISHAD, NEAR DISTRICT COLLOCTRATE OFFICE RAJSAMAND 50 15

Automatic External Defibrillator (AED)

ac static watthour meters-Energy meter Ac Static Watthour Meters-Energy Meter ( 18 ) Technical Specifications Specification Specification Name Values Allowed Values FEATURES Number of phases Three phase four wire single phase two wire, Three phase four wire Reference Voltage 415 240, 415 Basic Current Ib 10 5, 10, 20 Rated maximum current (I max) as (%) of lb 600 400, 600 Accuracy Class 1 1 GENERIC Features requirements conforming to the STC of the product yes yes Requirement of External Current Transformer No - CERTIFICATION ISI marked to IS 13779/99 with latest amendments Yes - CM/L No(Not a part of biddable parameter) 4819477 - ADDITIONAL FEATURES Additional features/functions, if any No Additional Features. This is a simple 10 - 60 Amp 415 VAC Three - 1/3 Phase kWh Energy Meter with LCD Display TEST REPORT DETAILS Availability of Test Reports from Central Govt/NABL approved/ILAC acredited lab to prove conformity to the specification yes yes, No Test Report number and date (Not a part of biddable parameter) HPL/1060415/987Y, 24.07.2017 - Name and address of laboratory (Not a part of biddable parameter) HPL Testing Laboratory - New Delhi, India - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuldeep Singh N 131305, BHAGAT PHOOL SINGH MAHILA VISHWAVIDYALAYA, KHANPUR KALAN 18 15

dual iris scanner Dual Iris Scanner ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Karun Yadav 462003, Madhya Pradesh Rajya Sahakari Bank Maryadit, T.T.Nagar Bhopal 1 15