Organization Name Tender Results

Camera for CCTV System Camera For CCTV System ( 75 ) Technical Specifications Specification Specification Name Values Allowed Values CAMERA TYPE Type of Camera Housing DOME CAMERA DOME CAMERA, BOX CAMERA, BULLET CAMERA IP Camera Yes Yes, No PTZ Camera No Yes, No IMAGE SENSOR Image Sensor Type CMOS CCD, CMOS Image Sensor Size 1 1, 0.67, 0.5, 0.34, 0.25, 0. 357, 0.37, 0.4 Camera Image Sensing capacity (Picture Mode) 2MP 2MP Resolution D1 (704 x 480 Pixel), HD (1280 x 720 Pixel), Full HD (1920 x 1080 Pixel) D1 (704 x 480 Pixel), Full HD (1920 x 1080 Pixel), 4K HD (3840 X 2160 Pixel) Day/Night Capable true IR illumination Range(mtr) 15 15, 30, 50, 80, 100, 120, 1 50, NA OPTICS Lens Type Fixed - Focal Length(mm) 2.8 As per GeM Catalogue. Iris Control Yes - Focus Mode Auto - 1/6 VIDEO Frame Rate (fps) 25, 30 25, 60 Video Compression H.264, MJPEG - Video Streaming Dual compressed stream Dual compressed stream, Triple compressed stream, Quad Compressed Stream PAN/TILT/ZOOM Panning Range NA - Pan Speed (deg/sec) NA 120, 240, 320, NA, 180 Tilt Range below horizontal (deg) NA - Tilt Range above horizontal (deg) NA - Tilt Speed (deg/sec) NA 90, NA Optical Zoom NA 12X, 20X, 30X, 36X, 44X, NA Digital Zoom NA 10X, 12X, 16X, NA AUDIO Audio Support true true Audio Compression NA - Audio Streaming One-Way - Number of Audio Input Channel 1 - Number of Audio Output Channel 1 - External Microphone Support false - ALARM Alarm Support true Number of Alarm Digital Input 1 - Number of Alarm Relay Output 1 - Pre/Post Alarm Buffer true - SECURITY Multi Level User ID/Password Yes - IP Address Filtering true - Encrypted Data Transmission HTTPS (SSL/TSL) - PERFORMANCE Minimum Illumination for Capturing Color Image 0.05 0.6, 0.2, 0.1, 0.05, 0.0 1 Electronic Shutter Speed(sec) 1/3 to 1/10000 - WDR (Wide Dynamic 80 dB 80 dB, 100 dB, 120 2/6 Range) dB, DWDR SNR (Signal to Noise Ratio) 40-50 40-50, 50-60, 60-70, 70-8 0 Auto Exposure Auto Level Control - FEATURES White Balance ( Indoor/Out door/Manual Selectable) Yes - Auto Gain Control (On/Off selectable) Yes - Back Light Compensation Yes - Remote Administration (Remote configuration and status using web based tool) Yes - Remote System Update Over Network Yes - PC Client (PC application client with a channel recording feature support) Yes - Web Client (Viewer through HTTP system configuration) Yes - On Screen Display in English Yes - ONVIF Support Yes - Presets 50 - Group Touring 9 - Privacy Zones 4 - NETWORK AND INTERFACE Supported Protocols UDP, SNMP, IGMP, DHCP, RTP, RSTP, HTTP, SMTP, F TP, ICMP, HTTPS, DNS, DD NS, RTSP, RTCP, NTP, UPn P, QoS, TCP/IP - IP Support Static, Dynamic - Signal Processing Digital Signal Process - IPv6 ready Yes - Wireless false - Simultaneous Connections 5 - STORAGE On Board SD Card Support false - SD Card Memory(GB) NA - HOUSING Installation Type Indoor Indoor, Outdoor 3/6 Material of the Housing construction Plastic Alluminium, Plastic Protection NA - Vandal Resistant Housing No - If Yes, IK rating NA - Mounting bracket Pole Mounted - Weight 400 - Dimensions (mm x mm x mm) 72.3×89.9×131.3 - POWER SUPPLY Power Input 12 V DC - Power Consumption 4.5 - Suitable Adapter Shall be Supplied to Make the Equipment Work on 230 V (+/- 10 %), 50 Hz NA - OPERATING CONDITIONS Operating Temperature Range -20 to +50 deg C - Relative Humidity Non Condensing (%) 95 - WARRANTY/SERVICES Warranty 1 1, 2, 3, 4, 5 Time for Replacement of Defective Product During Warranty Period 72 12, 24, 36, 48, 72 Supply of Compatible drivers and software included Yes - ENVIRONMENTAL CERTIFICATION Availability of facility & infrastructure for verification of all parameters, features, and capability with Seller Yes - Availability of facility to test signal to noise ratio of camera at 0-01 lux Yes - Conformity to Dry Heat test at 55 degree C for 16 hours as per IS :9000 latest Yes - Conformity to Damp heat at 40 degree C - 95% RH (cyclic test): two cycles of 16+8 Yes - 4/6 hours as per IS: 9000 latest Conformity to Cold test at -10/-20 degree C for 4 hours as per IS: 9000 latest, as applicable Yes - BIS Registration for safety general requirements as per IS 13252 (Part 1):latest Yes - Availability of Type Test Report from Central Govt NABL/ILAC accredited lab to prove conformity to specification true - Test Report Number and Date E307937-A16-UL 5 NOV 2013 - Name and Address of Test Lab UL HANGZHOU HIKVISION DIGITAL TECHNOLOGY CO LTD NORTH AMERICA - Certification FCC, CE, UL - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vilas Navnath Gade 413001, General Administration Department -1, Zilla Parishad, Solapur 75 15

COUNTER CHAIR COUNTER CHAIR ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Height Adjustment With Hydraulic With Hydraulic, Without Hydraulic Frame and support made of CHROME PLATED MS TUBES SS 304, SS 202, POWDER COATED MS TUBES, CHROME PLATED MS TUBES Chair Type REVOLVING REVOLVING, NON REVOLVING TYPE OF SEATING SEAT WITH INTEGARTED BACK REST ONLY SEAT, SEAT WITH INTEGARTED BACK REST, SEAT WITH SEPERATE BACKREST Padestal Base Glass Fibre Nylon Glass Fibre Nylon, ABS Plastic, Stainless Steel, Aluminium Die Cast Foot Rest With With, Without Padestal Base Type Without Wheels With minimum 5 Nos ABS/Nylon Twin Caster wheels, Without Wheels Arms Without With, Without SEAT MATERIAL CUSHIONED SEAT - 1/3 Dimensions Shape of Seat Circular, Square, rectang ular, oval - Seat Size (mm x mm) 450mm x 450mm - Height Adjustment in mm (+/- 5 mm) 100 - Padestal Size Diameter in mm (+/- 10 mm) 650 - Seat Height At Lowest Position in mm (+/- 10 mm) 600 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 - Density of Polyurethane Foam Used in Seat (Kg/Cub M) 40 - Material Material of Fabric of Seat Cover No Fabric - MISC Padestal Base Chrome Plated yes - Colour of Seat Brown - MAX LOAD BEARING CAPACITY IN KG 85 As per GeM Catalogue. GSM/Thickness Of Fabric No Fabric - WARANTEE PERIOD IN NUMBER OF YEARS 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajveer Singh 313324, JILA PARISHAD, NEAR DISTRICT COLLOCTRATE OFFICE RAJSAMAND 3 15

sofas

chairs-office

Class Room Desking and Seating Class Room Desking And Seating ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING ONLY TABLE/DESK ONLY TABLE/DESK Desking Configuration SINGLE SEATER SINGLE SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 900 As per GeM Catalogue. DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18 mm thick prelaminated Particle Board As per GeM Catalogue. Material of Support Structure or Side Pannel Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm Height of Desk Top in mm (±5 mm) 700 As per GeM Catalogue. Width of Desk Top in mm (± 5 mm) 600 As per GeM Catalogue. SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) ONLY DESK NO SEATING 12 mm Thick Plywood Only, 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P 1/4 or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 18 mm thick prelaminated Particle Board, 25 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 19mm thick Commercial Block Board BWP grade Conforming to IS 1659, 19mm thick Decorative Block Board BWP grade Conforming to IS 1659, 19mm thick Commercial Block Board MR Grade Conforming to IS 1659, 19mm thick Decorative Block Board MR Grade Conforming to IS 1659, 25mm thick prelaminated plywood having 0.8 mm (± 0.2mm) thick prelaminated sheet, ONLY DESK NO SEATING Material of Support Structure ONLY DESK NO SEATING As per GeM Catalogue. Material of Seat Cushion ONLY DESK NO SEATING ONLY DESK NO SEATING Width of Seating in mm (±10 mm) ONLY DESK NO SEATING As per GeM Catalogue. Height of Seat in mm (±10 mm) ONLY DESK NO SEATING As per GeM Catalogue. Width of backrest if provided in mm (± 5 mm) No Backrest As per GeM Catalogue. Back Support for Seating of Same materail as Seating back support not provided Provided with Cushion, Provided without cushion, back support not provided 2/4 MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) Can be configured as per buyer's choice within offered technical details - Colour of finish brown - Desk top finishing Two long sides shall have post form half round profile and other two sides edge banded with 2 mm thick PVC tape with the help of hot melt glue - Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) NA - WARRANTY Warranty period in number of years 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rakesh Acharya 304502, Govt collehe malpura 200 15

classroom chairs Classroom Chairs ( 200 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Chair Type Without Arms Without Arms Type of Seat and Backrest 18 mm thick prelaminated Particle Board As per GeM Catalogue. Depth of Seat in mm (+/- 10 mm) 400 - Height of Seat in mm (+/- 10 mm) 440 - Width of Seat in mm (+/- 10 mm) 400 - Overall Chair Height in mm (+/- 10 mm) 750 - SEAT DETAILS Thickness of Cushion Used in Seat in mm (+/- 2 mm) No Cushion - Density of Cushion Used in Seat (Kg/Cubic Metre) No Cushion - Material of Fabric of Seat Cover No Cusihion No Cover - BACKREST DETAILS Density of Cusion Used in Backrest (Kg/Cubic Metre) No Cushion - Thickness of Cushion in No Cushion - 1/3 Backrest in mm (+/- 2 mm) Material of Fabric of Backrest Cover No ciushion no cover - Width of Backrest (mm) 400 - Height of Backrest (mm) 150 - SUPPORT/UNDER STRUCTURE Frame Material Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm Under Storage provided below the Seat NO - Material of under storage NA - Length of Under Storage (mm) NA - Width of Under Storage (mm) NA - DEPTH of Under Storage (mm) NA - WRITING PAD DETAILS Writing Pad Material 18 mm thick prelaminated Particle Board - Writing Pad Size (Length X Width in mm) NA - MISC Colour of Fabric for Seat and Backrest No Fabric - Finishing of Structure Stove enameled Paint - WARRANTY Warranty period in number of years 1 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand NO - Product having BIFMA certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rakesh Acharya 304502, Govt collehe malpura 200 15

almirah- Steel Almirah- Steel ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest false - No of shelves (Nos) 6 - Type of Shelves Fixed - Locker Provided false - Locking System with the locker NO - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 1 - Number of Glass Sheet fixed in each Almirah door (Nos) N.A - Construction Welded - Lock Three Way bolting device controlled by lock - MATERIAL Material M S Sheet conforming M S Sheet conforming 1/3 to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors perforated MS sheet perforated MS sheet Sheet Thickness of Locker N.A - Length of Glass Sheet ±10 (mm) N.A - Width of Glass Sheet ±10 (mm) N.A - Sheet Thickness of door in mm 1.0 mm - Sheet Thickness of sides, back, Top and Bottom 1.0 mm - Sheet Thickness of Shelves 1.0 mm - Sheet Thickness of Pedestal in mm 1.0 mm - Material of Lock steel - Material of Keys steel - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1800 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1 450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 480 430, 455, 480, 486, 270, 3 70, 400 Inside Height of Locker in mm (± 5 mm) N.A - Inside Width of Locker i mm (±5 mm) N.A - Inside Depth of Locker in mm (±5 mm) N.A - Width of Stiffner in mm (±5 mm) N.A - Thickness of MS Sheet of Stiffner (in mm) N.A - Stiffened Pedestal height in mm (±2 mm) 125 - Pedestal Width in mm (±2 mm) 70 - COLOUR & FINISH Finish Synthetic enamel - 2/3 Colour of Paint olive green - Packing: Bubble Sheet - CERTIFICATION ISI marked false - CM/L No. - - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rakesh Acharya 304502, Govt collehe malpura 10 15

Inverter with sine wave output Inverter With Sine Wave Output ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Inverter Governing specification Generally conforming to IS:13314 - Rating in KVA & Min. VAH Capacity of Battery 3 KVA/12960 VAH 3 KVA/12960 VAH Technology IGBT-PWM IGBT-PWM Energy Star Rating 3 Star 3 Star Trolley with trolley with trolley Type of Battery Tubular battery confirming to IS:13369 Tubular battery confirming to IS:13369, VRLA battery confirming to JISC:8702(Pt.I, II&III) Backup time (Minutes) Minimum 180 Minutes - CONSTRUCTIONAL Thickness of sheet for trolley (in mm) minimum 1.2 - Trolley Material CRCA Steel - Type of enclosure CRCA Steel - Thickness of sheet for enclosure ( in mm) minimum 1.2 - Inverter shall have by Yes - 1/3 pass facility FUNCTIONAL Total Harmonic distortion </=5% - Input Single Phase sine wave(120 to 260 V) - Output Single Phase sine wave 240 V - Inverter Efficiency (%) >/=87% - Overload Time (in Minutes) >/=10 - Overload of rated load (in %) >/=10 - PROTECTION Battery cut-off voltage to protect from overdischarge (in Volt) >10.5 - Degree of protection IP 21 - METERING AND INDICATIONS The inverters shall be provided with output voltage and current meters conforming to IS 2419 : 1979 and of an accuracy class not inferior to 2.5 in accordance with IS 1248 : 1983 Yes - CERTIFICATIONS Availability of the Type Test Report from Central Govt. NABL/ILAC Accredited lab Yes - Climatic test report as per clause 7.10.1 of IS 13314 yes - Type Test Certificate No. 8786 - Name of Lab GLOBAL LAB - Type Test Certificate date 12/09/2016 - Address of Lab NEW DELHI - Inverter shall have valid BIS CRS certifications for </= 10 KVA Yes - * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Rakesh Acharya 304502, Govt collehe malpura 1 15

Multimedia Projectors

clinical cabinets Clinical Cabinets ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values DIMENSIONS Overall depth range (mm) 800 mm (+/- 2.5%) 800 mm (+/- 2.5%) Overall Width range (mm) 400 mm (+/- 2.5%) As per GeM Catalogue. Overall Height range (mm) 820 mm (+/- 2.5%) 820 mm (+/- 2.5%), 750 mm (+/- 2.5%), 650 mm (+/- 2.5%), 600 mm(+/-2.5%, 500 mm(+/- 2.5%), 450 mm (+/-2.5%), 400 mm(+/-2.5%) CONFIGURATION DETAILS Frame Tube Thickness (mm) 1 - No. of castor wheels (Nos) 0 - Dia. Of Castor (mm) 0 - Bumper at the back Yes - Painting Powder Coating Powder Coating, Stove enamel, N/A Type of slide of drawer Fitted With Telescopic Channel Fitted With Telescopic Channel, Fitted with Ball bearing type, None Material of Enclosure of bedside locker Mild steel Stainless steel, Mild steel, Wood 1/3 Material of cabinet and Drawer Mild steel Stainless steel, Mild steel Locking system for cabinet and drawer true FEATURES Number of Shutters 5 Number of Open shelves 0 Number of Shelves 5 Finish EPOXY EPOXY, Power Coated FRAME TUBE Frame Tube Material MILD STEEL MILD STEEL, STAINLESS STEEL Section of Frame Tube Rectangular - Frame Tube size 0 - SELLER DEFINED weight (Kg) 40 - Details of Handles 6 - Drawing Number Available On Web false - Drawing No na - Product Code available on web false - Drawing No. na - Overall dimensions of the product offered : overall depth in mm x Overall Height in mm x Overall Height in mm (value must fall within the range selected for the product) NA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rakesh Acharya 304502, Govt collehe malpura 2 15

Line Intractive UPS with AVR Line Intractive UPS With AVR ( 80 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 0.5/84 As per GeM Catalogue. Technology MOSFET-PWM MOSFET-PWM, IGBT- PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz, Single Phase Quasi-Sin-wave 230 V AC, 50 Hz Degree of protection IP-21 IP-21, IP 20 Inverter Efficiency (%) >/= 60% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year 1 year, 3 Years Warranty for Line Interactive UPS 1 Year 1 Year, 2 Years, 5 Years, 3 Years Installation and commissioning instructions No - CONSTRUCTIONAL Type of enclosure ABS - 1/4 AC out put for printer (not through inverter) Yes Yes, No Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 2 Three pin, 3 Three pin, Hard wiring, Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - 2/4 Dry heat Test at 45 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Yes - Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date - - Name Of Lab - - Address of Lab - - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Not applicable presently - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Laxman HanmantaChalwa di 413001, Solapur Municipal Corporation, Computer Department, Dr.Babasaheb Ambedkar Chowk (Park Chowk) Solapur 80 15

chairs-office Chairs-office ( 75 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 3499 (Part-1) Latest true - Chair Type With Arms With Arms Type of Seat and Backrest Padded with Polyurethane Foam Padded with Polyurethane Foam Frame Type 4 Legs Cantilever, 4 Legs Castors Without With, Without MATERIAL Type of Wood used in Polythene cane Chair NOT APPLICABLE solid wood, teak wood, hot pressed board, plastic net, NOT APPLICABLE Material of Fabric Back Cover leatherite leatherite Thickness of Plywood used in Backrest IN MM (±1 mm) 15 mm 12 mm, 15 mm, 18 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, N.A Frame Material chrome on MS chrome on MS Density of Polyurethane Foam Used in Seat ±2 (Kg/Cub M) 40 Kg/Cub.M - Material of Fabric of black leatherite black leatherite 1/4 Seat Cover Density of Polyurethane Foam Used in Backrest ±2(Kg/Cub M) 32 Kg/Cub.M - Thickness of Plywood used in Seat ±1(mm) 18 mm 18 mm GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 220 Gram per Sq Meter 80 Gram per Sq Meter, 220 Gram per Sq Meter, 250 Gram per Sq Meter, 290 Gram per Sq Meter, N.A Arm Material Polypropelene on metal As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 50 mm 25 mm, 50 mm, 62 mm, 65 mm, 70 mm, N.A, 40 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 50 mm 15 mm, 60 mm, 75 mm, 80 mm Shoe Type PVC - DIMENSION Size of Material (mm) 16 gauge tubular pipe 14 SWG 25 mm round pipe, 16 SWG 30 mm round pipe, 2 mm thick 25 mm tube, 40 mm teak wood, 16 gauge tubular pipe Chair Height ±15(mm) 950 mm 950 mm Seat Depth ±10(mm) 500 mm 350 mm, 400 mm, 430 mm, 450 mm, 500 mm, 550 mm, 580 mm, 600 mm, 650 mm, 720 mm Seat Width ±10 (mm) 470 mm 350 mm, 380 mm, 470 mm, 650 mm Seat Height IN MM ±5(mm) 500 400, 430, 460, 480, 500, 3 80 Backrest Width ±10(mm) 450 mm 350 mm, 480 mm Backrest Height ±10(mm) 500 mm As per GeM Catalogue. Arm Length ±5(mm) 200 mm 200 mm, 250 mm, 300 2/4 mm, 350 mm, 490 mm Arm Width ±2(mm) 30 mm 25 mm, N.A COLOUR & FINISH Colour of Fabric for Seat and Backrest black - Paint Type powder coated on MS chrome, epoxy polyster, polished, synthetic enamel, powder coated on MS, N.A Colour of Paint black - CERTIFICATION Polythene cane conforming to Type-1 of IS 5378/1994 NA - Test reports to be furnished to buyer on demand YES YES, NO BIFMA certification YES YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO WARRANTY Warranty period in number of years 2 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rakesh Acharya 304502, Govt collehe malpura 75 15

Inverter with sine wave output Experience with Gov. Required 5 Year (s) Inverter With Sine Wave Output ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Inverter Governing specification Generally conforming to IS:13314 - Rating in KVA & Min. VAH Capacity of Battery 2 KVA/8640 VAH 0.8 KVA/3456 VAH, 1 KVA/4320 VAH, 1.5 KVA/6480 VAH, 2 KVA/8640 VAH, 3 KVA/12960 VAH, 5 KVA/21600 VAH, 7.5 KVA/32400 VAH, 10 KVA/43200 VAH Technology IGBT-PWM MOSFET-PWM, IGBT- PWM Energy Star Rating 3 Star 3 Star, 4 Star, 5 Star Trolley with trolley with trolley, without trolley Type of Battery Tubular battery confirming to IS:13369 Tubular battery confirming to IS:13369, VRLA battery confirming to JISC:8702(Pt.I, II&III) Backup time (Minutes) Minimum 180 Minutes - CONSTRUCTIONAL Thickness of sheet for trolley (in mm) minimum 1.2 - 1/4 Trolley Material CRCA Steel - Type of enclosure CRCA Steel - Thickness of sheet for enclosure ( in mm) minimum 1.2 - Inverter shall have by pass facility Yes - FUNCTIONAL Total Harmonic distortion </=5% - Input Single Phase sine wave(120 to 260 V) - Output Single Phase sine wave 230 V - Inverter Efficiency (%) >/=87% - Overload Time (in Minutes) >/=10 - Overload of rated load (in %) >/=10 - PROTECTION Battery cut-off voltage to protect from overdischarge (in Volt) >10.5 - Degree of protection IP 21 - METERING AND INDICATIONS The inverters shall be provided with output voltage and current meters conforming to IS 2419 : 1979 and of an accuracy class not inferior to 2.5 in accordance with IS 1248 : 1983 Yes - CERTIFICATIONS Availability of the Type Test Report from Central Govt. NABL/ILAC Accredited lab Yes - Climatic test report as per clause 7.10.1 of IS 13314 yes - Type Test Certificate No. 32552576 - Name of Lab Luminous Power Technologies Pvt.Ltd - Type Test Certificate date 23/09/2017 - Address of Lab sector 44 Gurgaon, Haryana-12203 - 2/4 Inverter shall have valid BIS CRS certifications for </= 10 KVA Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Baboo lal Bairwa 303503, Rajesh pilot govt.college shyampura road lalsot 2 15

All in one All In One ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel - Processor Generation 6th 6th Processor Intel Core i5-7600K (3.8 GHz, 6 MB Cache, 4 Cores) Intel Core i5-7600K (3.8 GHz, 4 Cores) Chipset Chipset Intel B250 - Graphics Graphics type Dedicated/Discrete - Graphic Card Description 2gb dedicated - Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 1000 1000 Hard disk drive speed (RPM) 7200 - RAM Type of RAM DDR4 - RAM Size (GB) 8 8 RAM Expandability Upto (GB) 32 32 Ram speed (MHz) 2666 - Operating System Operating system Mac OS High Sierra Mac OS High Sierra 1/3 OS Certification Mac OS - Display Display Size (Inch) 21.5 21.5 Type of Display Non Touch Non Touch display resolution (Pixels) 3200 x 1800 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes - Ports USB Port 2.0 (No.) 8 - USB Port 3.0 (No.) 8 - VGA Port Available - HDMI Port Available - Thunderbolt Port (No.) 3 - Display Port Available - Input Devices Keyboard Standard with USB Interface - Mouse Optical Scroll with USB Interface - Audio Integrated Stereo Sound with internal speakers & Mic. - Connectivity Wi-fi Connectivity 802.11 ac - Bluetooth Connectivity 4.0 or higher - LAN Port Integrated Gigabit Ethernet 10/100/1000 - Certification BIS Registration under CRS of Meity Yes - BIS Registration no - - Certifications Available BEE - ROHS Compliance Yes - Power Maximum Wattage (Watts) 182 - Power Efficiency (%) Minimum 80 - Others Webcam Full HD - DVD R/W Available - Optical drive Integrated - Stand Height Adjustable - 2/3 On Site OEM Warranty (Year) 1 1 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vishnu Das Gupta 302005, 301, block A, vitta bhawan. 3rd floor janpath jaipur 3 15

Inverter with sine wave output Inverter With Sine Wave Output ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Inverter Governing specification Generally conforming to IS:13314 - Rating in KVA & Min. VAH Capacity of Battery 2 KVA/8640 VAH 2 KVA/8640 VAH Technology IGBT-PWM MOSFET-PWM, IGBT- PWM Energy Star Rating 3 Star 3 Star, 4 Star, 5 Star Trolley with trolley with trolley, without trolley Type of Battery Tubular battery confirming to IS:13369 Tubular battery confirming to IS:13369, VRLA battery confirming to JISC:8702(Pt.I, II&III) Backup time (Minutes) Minimum 180 Minutes - CONSTRUCTIONAL Thickness of sheet for trolley (in mm) minimum 1.2 - Trolley Material CRCA Steel - Type of enclosure CRCA Steel - Thickness of sheet for enclosure ( in mm) minimum 1.2 - 1/3 Inverter shall have by pass facility Yes - FUNCTIONAL Total Harmonic distortion </=5% - Input Single Phase sine wave(120 to 260 V) - Output Single Phase sine wave 230 V - Inverter Efficiency (%) >/=87% - Overload Time (in Minutes) >/=10 - Overload of rated load (in %) >/=10 - PROTECTION Battery cut-off voltage to protect from overdischarge (in Volt) >10.5 - Degree of protection IP 21 - METERING AND INDICATIONS The inverters shall be provided with output voltage and current meters conforming to IS 2419 : 1979 and of an accuracy class not inferior to 2.5 in accordance with IS 1248 : 1983 Yes - CERTIFICATIONS Availability of the Type Test Report from Central Govt. NABL/ILAC Accredited lab Yes - Climatic test report as per clause 7.10.1 of IS 13314 yes - Type Test Certificate No. 32552576 - Name of Lab Luminous Power Technologies Pvt.Ltd - Type Test Certificate date 23/09/2017 - Address of Lab sector 44 Gurgaon, Haryana-12203 - Inverter shall have valid BIS CRS certifications for </= 10 KVA Yes - * Bold specifications are the golden parameters. 2/3 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rakesh Acharya 304502, Govt collehe malpura 1 15

Computer Table Computer Table ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of Computer Table Computer table with key board drawer and table top Computer table with key board drawer and table top Construction of Computer/Printer Table Steel members duly welded and rigid fixed table top, with slideable key board tray, drawer, modesty panel, foot rest and also with another shelf at the bottom side for placing CPU and other peripherals - Top Extended by 50 mm on all sides over the steel frame - Edge of Top banded with 1.5 mm thick PVC tapes of some shade as that of tape - Placing of modesty panel covering full back side of frame end suitably welded with two side members of the from in such a way that it's top surface having 17 mm width, flushes with top surface two side - 1/4 members and joining front angle member Packing Gutta Packing - Mode of Supply of modular table Assembled Ready To Use - MATERIAL Frame Material Size Hollow Rectangular Section Of Size 50 X 25 X 1.6 Mm Thick - Frame material of foot rest Hollow Rectangular Section Size 50 X 25 X 1.6 Mm Thick - Joining of Frame two side member of the frame identical in shape joined with welding at bottom with a footrest angularly welded - Welding of Modesty Panel A modesty panel of size 200 mm X 17 mm X 0.8 mm thick CRC sheet to be welded - Making of Frame To be rigid in construction - Welding at top and Back At The Top In Front Side Welded With An Angle Size 17 Mm X 17 Mm X 3 Mm And At The Back On The Top Side Of The Frame - Guides Thickness (for drawer) 2 mm thick minimum from mild steel sheet - Material of Table Top, Key board and drawer pre-laminated Particle boards (Wood Product) of grade II Type II of IS 12823 Latest - Bottom side of top should have balancing sheet of requisite thickness of same colour as top laminate - Thickness of Table Top etc 18.0 - Lock of Drawer true - Type of lock N.A - Sliding of Key board provided with two telescopic channels with balls - Material of Modesty Panel CRC sheet conforming to IS:513/Latest - 2/4 Welding of screws to make capable to adjustable level upto 10 mm in height four level screws, having smooth bottom flat surface of minimum 50 mm diameter, be welded under the bottom of two side members of frame - DIMENSION Size of Computer Table ±10 mm (LXBXH) 1000 Mm X 600 Mm X 750 Mm - Size of Printer Table ±10 mm (LXBXH) NA - Size of Computer Cum Printer Table ±10 mm (LXBXH) NA - Outside Drawer Size (L X B X H) ±5 mm NA - Size of key board tray ±5 mm N.A - Size of Modesty panel 200 mm X 17 mm X (0.8 mm thick) - COLOUR & FINISH Phosphating treatment of MS parts after Pick as per IS:3618/Latest - Primer for coating on M S parts Redoxide - Putty for filling conforming to IS:110/Latest - Paint exposed steel sections to be painted with black in colour with powder coating 40-50 micron thickness - Powder Coating conforming to IS:13871/Latest - Colour of Top teak - WARRANTY Warranty period in number of years 1.0 1.0 CERTIFICATION Test reports to be furnished to buyer on demand YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rakesh Acharya 304502, Govt collehe malpura 15 15 3/4

Line Intractive UPS with AVR Line Intractive UPS With AVR ( 13 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 0.65/400 As per GeM Catalogue. Technology MOSFET-PWM MOSFET-PWM, IGBT- PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz, Single Phase Quasi-Sin-wave 230 V AC, 50 Hz Degree of protection IP-21 IP-21, IP 20 Inverter Efficiency (%) >/= 70% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year - Warranty for Line Interactive UPS 2 Years 1 Year, 2 Years, 5 Years, 3 Years Installation and commissioning instructions Yes - CONSTRUCTIONAL Type of enclosure ABS - AC out put for Yes Yes, No 1/4 printer (not through inverter) Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 2 Three pin, 3 Three pin, Hard wiring, Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - Dry heat Test at 45 Yes - 2/4 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date - - Name Of Lab - - Address of Lab - - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Baboo lal Bairwa 303503, Rajesh pilot govt.college shyampura road lalsot 13 15

Televisions

Televisions

Electronic Lectern

Interactive Boards Interactive Boards ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values PERFORMANCE PARAMETERS Mode of operation Projector and whiteboard Mode both Projector mode, Projector and whiteboard Mode both Board Aspect Ratio 16:10 16:10, 5:4, 4:3, 16:9 Touch Technology infrared resistive, electromagnet ic, anoto, infrared, capaci tive, ultrasonic, Optical Touch interface Touch Sensitive and Pen Driven Both touch senstive, pen driven, Touch Sensitive and Pen Driven Both Source of power Supply Through USB Ports - Number of USB 2.0 ports (Nos) 1 - Number of USB 3.0 ports (Nos) 0 - Number of electronic pen or stylus to be supplied with the board (Nos) 3 - Operating system Comparability - - Details of software provided - - Display Resolution in 32775 1/4 pixels Number of touch points (Nos.) 6 - Response time in milliseconds 0.4 - Bluetooth connectivity true - Power consumption in Watt 0.5 - Wi-fi connectivity true - Provision for wall mounting yes - Operating Humidity (%) 80 - Operating Temperature Range in Degree celsius - - Warranty in years 1 1, 2, 3, 4, 5 DIMENSIONAL PARAMETERS Surface material of Boards ceramic Steel Surface Laminate Surafce, Painted Steel Surface, ceramic Steel Surface Board Diagonal Size in inch 88 Active area (Diagonal) of the board in Feet (Width x height) - - Active area (Diagonal )of the board in mm(Width x height) - - ADDITIONAL SUPPLIES USB Extender Hub 8 Meters true - All connecting Cables and accessories to be supplied along with the Board yes - Installation Kit to be supplied alongwith the Board Yes - Availability of Direct Printing Facility from Board true - Operating and Installation Manual Yes - Test Reports Availability of test reports from Central Govt/NABL/ILAC accredited Lab covering all the Yes Yes, No 2/4 parameters Test Report No - - Test Report date - - Name of Test lab - - Complete Address of the Test lab - - Copy of Test reports will be provided to buyer on Demand at the time of supplies (Applicable if availability of test report indicated as YES, otherwise put NA) Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rakesh Acharya 304502, Govt collehe malpura 1 15

Air Walker- Air Stroller- Outdoor Gym Equipment Average Turn Over of Last 3 Years 20 Lakh (s) Experience with Gov. Required 2 Year (s) Air Walker- Air Stroller- Outdoor Gym Equipment ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Single Single, Double SIZE/DIMENSIONS Length 850 - Width 360 - Height 1250 - CAPACITY Maximum User Weight ( Kg ) 100 100, 110, 120 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1239 ( Part 1 )- 2004, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true Main Frame 80mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Frame Pipe, Class as per IS 1239 Heavy Medium, Heavy, Not applicable for pipe as per IS 1161 1/4 Designation of Main Frame Pipe ( as per IS 1161 ) Yes as per IS 1161 - leg movement frame 32mm Nominal Bore G.I. Pipe 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 50mm Nominal Bore G.I. Pipe Leg Movement Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Leg movement frame Pipe ( as per IS 1161 ) Yes as per IS 1161 - Handle Frame 25mm Nominal bore G.I. pipe 25mm Nominal bore G.I. pipe, 32mm Nominal bore G.I. pipe Handle Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Handle Frame Pipe ( as per IS 1161 ) Hint must be declared as per clause 3 of IS 1161 indicating nominal bore, wall thickness and grade ( not applicable for pipe as per IS 1239 ) Yes as per IS 1161 - Movement must be supplied with bearings Yes - Bearings Ball Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Foot Rest Fibre Reinforced Plastic Fibre Reinforced Plastic, Aluminum casting material, C.I., LD PE, HDPE, Nylon MS Foundation Plate Thickness 10 10, 12 Foundation Pipes with anchoring 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 2/4 Nominal Bore of Foundation Pipe 80mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Not applicable for pipe as per IS 1161 Designation of Foundation Pipe ( as per IS 1161 ) Yes as per IS 1161 - Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Nuts and Bolts for Assembly Stainless Steel - Closing Caps of open ends of the pipes, bearings, bushes and base SS 304 Grade Stainless Steel - Thickness of closing caps ( min ) 2 - All Plastic Components U V stabilised, weather resistance - COLOUR Colour As per buyer's requirements - Paint/Finish Powder Coated, UV resistant - Paint Coating Thickness ( min ) 80 - OTHER REQUIREMENTS Ergonomic Design Yes - Foot rest shall be antislip/antiskid Yes - Moving ( swinging ) Scope should be Limited Yes - There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free from entrapments and sharp edges Yes - Installation Instructions must be provided Yes - Installation Not Included Included, Not Included Safety and quality Requirements European Standard EN 16630: 2015 latest - 3/4 Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) As per European Standard EN 16630 As per European Standard EN 16630, No Registration No and Validity of Registration 0102 valid upto 2019 - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 2 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajnish Chandra Srivastava 335001, GOVERNMENT P.G COLLEGE, HINDUMALKOT ROAD, SRIGNGANAGAR 1 15

Air Walker- Air Stroller- Outdoor Gym Equipment Average Turn Over of Last 3 Years 1 Lakh (s) Experience with Gov. Required 2 Year (s) Air Walker- Air Stroller- Outdoor Gym Equipment ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type Single Single, Double SIZE/DIMENSIONS Length 900 - Width 400 - Height 1300 - CAPACITY Maximum User Weight ( Kg ) 100 100, 110, 120 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1239 ( Part 1 )- 2004, latest BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest All the GI Pipes are ISI marked true Main Frame 80mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe Main Frame Pipe, Class as per IS 1239 Heavy Medium, Heavy, Not applicable for pipe as per IS 1161 1/4 Designation of Main Frame Pipe ( as per IS 1161 ) Yes as per IS 1161 - leg movement frame 32mm Nominal Bore G.I. Pipe 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 50mm Nominal Bore G.I. Pipe Leg Movement Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Leg movement frame Pipe ( as per IS 1161 ) Yes as per IS 1161 - Handle Frame 32mm Nominal bore G.I. pipe 25mm Nominal bore G.I. pipe, 32mm Nominal bore G.I. pipe Handle Frame Pipe, Not applicable for pipe as per IS 1161 Designation of Handle Frame Pipe ( as per IS 1161 ) Hint must be declared as per clause 3 of IS 1161 indicating nominal bore, wall thickness and grade ( not applicable for pipe as per IS 1239 ) Yes as per IS 1161 - Movement must be supplied with bearings Yes - Bearings Ball Bearing Ball Bearing, Tapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes - Foot Rest Fibre Reinforced Plastic Fibre Reinforced Plastic, Aluminum casting material, C.I., LD PE, HDPE, Nylon MS Foundation Plate Thickness 10 10, 12 Foundation Pipes with anchoring 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm 2/4 Nominal Bore of Foundation Pipe 80mm 80mm, 100mm, 125mm, 150mm Foundation Pipe, Not applicable for pipe as per IS 1161 Designation of Foundation Pipe ( as per IS 1161 ) Yes as per IS 1161 - Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. - Nuts and Bolts for Assembly Stainless Steel - Closing Caps of open ends of the pipes, bearings, bushes and base SS 304 Grade Stainless Steel - Thickness of closing caps ( min ) 2 - All Plastic Components U V stabilised, weather resistance - COLOUR Colour As per buyer's requirements - Paint/Finish Powder Coated, UV resistant - Paint Coating Thickness ( min ) 80 - OTHER REQUIREMENTS Ergonomic Design Yes - Foot rest shall be antislip/antiskid Yes - Moving ( swinging ) Scope should be Limited Yes - There shall be no crushing or searing points for user between moving and/or stationary parts of equipment during use Yes - Equipment shall be free from entrapments and sharp edges Yes - Installation Instructions must be provided Yes - Installation Not Included Included, Not Included Safety and quality Requirements European Standard EN 16630: 2015 latest - 3/4 Instruction Plate Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing - CERTIFICATION Certfication ( Safety and Quality Requirements ) As per European Standard EN 16630 As per European Standard EN 16630, No Registration No and Validity of Registration 085 valid upto 2020 - APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation, if desired by buyer Yes - WARRANTY Warranty ( years ) 2 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rajnish Chandra Srivastava 335001, GOVERNMENT P.G COLLEGE, HINDUMALKOT ROAD, SRIGNGANAGAR 1 15

camera for video conferencing system Camera For Video Conferencing System ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Camera for Video Conferencing System Camera without Codec - Type of Camera PTZ CAMERA FOR VIDEO CONFERENCING SYSTEM PTZ CAMERA FOR VIDEO CONFERENCING SYSTEM, Non PTZ CAMERA FOR VIDEO CONFERENCING SYSTEM Resolution Full HD(1920 x 1080 progressive signal) Full HD(1920 x 1080 progressive signal) Frame Rate (fps) 60 fps 30 fps, 60 fps Zoom Range Optical 10X 3X, 5X, 10X, 12X, 20X, 30 X, NA Zoom Range Digital 4X 2X, 3X, 4X, N A Field of View (Degree) 70 -72 horizontal field of view - Pan Range (Degree) -170°~+170° - Tilt Range (Degree) 30-90 - Type of Sensor CMOS - Camera Positioning Facility Manual Automatic Voice-activat ed, Movement-activated, Preset, Manual 1/3 Input/Output Port RJ45, HDMI, USB 3.0 - Camera Control (focusing, brightness, and white balance) Mannual - Minimum Illumination Required 101 - SNR 50 DB - PoE No - PoE+ No - BIS Registration under CRS of Meity NA - If yes, BIS Registration Number and its validity - - UL/CE certification No - UL/CE certificate Number (Furnished when demanded by buyer ) - - Operating temperature Range (Degree C) 5-45 - Operating humidity (%RH) 85 - Availability of test reports to prove conformity to the specifications (Furnished when demanded by buyer ) Yes - Installation and commissioning Yes - On SIte OEM Warranty (Year) 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rakesh Acharya 304502, Govt collehe malpura 1 15

Multimedia Projectors

Visual Presenters

Televisions

digital teaching device Digital Teaching Device ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Cabinet Cabinet Wall Mounted lockable enclosure Wall Mounted lockable enclosure, Floor Mounted lockable enclosure Material of the Cabinet CRCA Steel Sheet - Degree of Protection (IP Rating) - - CPU CPU Intel Core I3 Intel Core I3, Intel Core I5, Intel Core I7, Intel Atom Processor Generation 7th 6th, 7th, 8th RAM (GB) 4 RAM upgradable upto (GB) 16 8, 16 Hard Disk Capacity (GB) 1000 500, 1000, 96 Hard Disk Upgradable upto (GB) 1000 1000, 2000 OS Compatibility Windows 10 Professional - VGA Port Yes - 1/6 No. of USB 2.0 Ports (Nos) 1 - No. of USB 3.0 Ports (Nos) 4 - LAN Port Yes - Keyboard Inbuilt - Mouse/Track Pad Inbuilt - Operating System Windows DoS, Linux, Windows Central Controller Central Controller Not Available Available, Not Available Provisions available to control various components NA - Visualizer Visualizer Not Available Available, Not Available TYPE NA - Technology NA - Capture Size/Image Size NA - Resolution (Pixels) NA - Image Pick up Device (inch) NA - Video Frame Rates (fps) 0 - Optical Zoom 0 - Digital magnification 0 - Focussing Arrangement NA - Lens Focal Length (mm) 0 - Image Memory (Number of Images) 0 - Image Rotation Facility (Degree) 0 - Computer Interface NA - Light Source NA - Life of Lamp used (Years) 0 - Number of Input VGA Port 0 - Number of Output VGA Port 0 - Number of Output HDMI Port 0 - Scan Object Na - 2/6 Video Format Supported Na - Interactive Board Interactive Board Available Available, Not Available Board Diagonal size (mm) 2104 - Width of the active area of the board (mm) 1635 - Height of the active area of the board (mm) 1145 - Display Resolution (pixels) 32767x32767 - Board Aspect Ratio 4 : 3 - Touch interface Touch sensitive as well as pen driven Touch sensitive, pen driven, Touch sensitive as well as pen driven, NA Touch Technology Infrared Resistive, Electromagne tic, Infrared, Ultra sonic, Capacitive, Optical, NA Number of touch points 10 - Response time (milli seconds) 1 - Operating system Compatability Windows Linux & Mac - Input HDMI ports (Nos) 0 - USB 2 ports (Numbers) 1 - USB 3 ports (Numbers) 0 - Audio Input ports (Numbers) 0 - Audio output ports (Numbers) 0 - RS-232 C ports (Numbers) 0 - RJ 45 ports (Numbers) 0 - VGA-IN ports (Numbers) 0 - VGA OUT ports (Numbers) 0 - Short Cut Keys (Available on both sides of board) Yes - In built Speakers NA - Speaker Output (Watt) 100 watts rms apmlifier and two speakers housed in array of - 3/6 minimum 25 W rms each (External) Number of electronic pen or stylus to be supplied with the board (Numbers) 2 - Bluetooth connectivity No - Wi-fi connectivity No - Power Supply V(AC) 100-240 - Details of software provided Annotation software shall include minimum features like choose, pens, annotate, erase, color, shapes, sizes, text, Edit, fonts, stamp, move, capture, picture, video, save, Rotate, undo, image gallery, print, floating keyboard and Background etc.. The software should have network classroom feature to conduct remote teaching by having interaction through all the three types of media Audio, Video and Text. - Power consumption (Watt) 0.5 - Standard Accessories to be supplied ie Active Board, Cordless Pen, USB Cable etc Yes - Operating Temperature Range for Complete Digital Teaching Device (degree C) 5-45 - Operating Humidity (RH) for Complete Digital Teaching Device (%) 80 - Projector with Arm Projector with Arm Available Available, Not Available Type Short Throw - TECHNOLOGY DLP - Native Resolution 1280x800 - Brightness (Lumens) 4000 Contrast Ratio - - 4/6 (Minimum) Zoom Feature No - Zoom ( in %age) No - Throw Ratio - - Aspect Ratio 16 : 10 - Keystone Correction Manual - Projection Lamp UHP UHP, LED, Laser, LED & Laser Hybrid, NA Minimum Life of projection Lamp (In Normal Mode) (Hours) 10000 Lamp Hour Counter (In- Built) Yes - Video Compatibility - - Inbuilt Speaker Yes - Speaker Output (Watt) 10 - HDMI/DVI Port Yes - Analog RGB In Port Yes - Analog RGB Out Port Yes - Audio In Yes - Audio Out Yes - Video In Yes - Storage Media Port (USB- Type A ) No - WiFi Availabilty No - LAN Connectivity Yes - Power Consumption in Sleep Mode (Watt) - - Power Consumption in Normal Mode (Watt) 270 - Power Supply (Vac) - - Green Board Green Board Not Available Available, Not Available If Yes, Dimension of Green Board (Length x Width) (cm x cm) NA - Air Mouse with Laser Pointer Air Mouse with Laser Pointer Not Available Available, Not Available External Frame External Frame to fix Active Board with Green Board Not Available Available, Not Available Dimension of External NA - 5/6 Frame (Length x Width) (cm x cm) Warranty On site OEM Warranty (Year) 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rakesh Acharya 304502, Govt collehe malpura 1 15

urn sand bags-HDPE AND PP SAND BAG Urn Sand Bags-HDPE AND PP SAND BAG ( 13625 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS 14252: 2015 (Latest) - Tying Cord PP rope of 4 mm dia, pierced between two layers of fabric below mouth hamming, length not less than 70 cm. PP rope of 4 mm dia, inserted in the mouth of the sack, length not less than 1 m., PP rope of 4 mm dia, length not less than 70 cm. Material Poly propylene (PP) High Density Polyethyle ne-(HDPE), Poly propylene (PP) DIMENSIONS Outside Width (cm) 38 - Picks/Dm 40 - Ends/Dm 40 - Mass of Bag (Without tying Cord) (gram) 55 - Outside Length (cm) 84 - CONSTRUCTIONAL Ash Content ( maximum ) 2.2 percent - No. of Bags in a Bale 500 - 1/2 CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/IL AC acredited Lab to prove conformity to the specification yes - Test Report No T 01263 - Test Report Date 21/04/2018 - Name of the Lab NATIONAL TEST HOUSE - Address of the Lab DEHRADUN - ISI Marked No Yes, No CM/L No (If ISI marked) (If ISI marked NO write NA) NA - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 N Abdul Jaleel 744101, SECRETARY, PORT BLAIR MUNICIPAL COUNCIL, INDIRA BHAWAN, MOHANPURA 13625 15

Lawn Mowers

camera for video conferencing system Camera For Video Conferencing System ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Camera for Video Conferencing System Camera without Codec - Type of Camera PTZ CAMERA FOR VIDEO CONFERENCING SYSTEM PTZ CAMERA FOR VIDEO CONFERENCING SYSTEM, Non PTZ CAMERA FOR VIDEO CONFERENCING SYSTEM Resolution Full HD(1920 x 1080 progressive signal) Full HD(1920 x 1080 progressive signal) Frame Rate (fps) 60 fps 30 fps, 60 fps Zoom Range Optical 10X 3X, 5X, 10X, 12X, 20X, 30 X, NA Zoom Range Digital 4X 2X, 3X, 4X, N A Field of View (Degree) 70 -72 horizontal field of view - Pan Range (Degree) -170°~+170° - Tilt Range (Degree) 30-90 - Type of Sensor CMOS - Camera Positioning Facility Manual Automatic Voice-activat ed, Movement-activated, Preset, Manual 1/3 Input/Output Port RJ45, HDMI, USB 3.0 - Camera Control (focusing, brightness, and white balance) Mannual - Minimum Illumination Required 101 - SNR 50 DB - PoE No - PoE+ No - BIS Registration under CRS of Meity NA - If yes, BIS Registration Number and its validity - - UL/CE certification No - UL/CE certificate Number (Furnished when demanded by buyer ) - - Operating temperature Range (Degree C) 5-45 - Operating humidity (%RH) 85 - Availability of test reports to prove conformity to the specifications (Furnished when demanded by buyer ) Yes - Installation and commissioning Yes - On SIte OEM Warranty (Year) 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shiv Nuwal 311604, Kota - Bhilwara Road Mandalgarh 3 15

Visual Presenters

barbed wire Experience with Gov. Required 2 Year (s) Barbed Wire ( 899 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conforming to Indian Standard IS:278 latest - Barbed Wire Type Type A Type A, Type B CONSTRUCTIONAL Size Designation as per ISS 1 1, 2, 3, 4, 5, 6 Type of Zinc Coating Hot Dip Galvanized Medium Coating Conforming to IS:4826 Hot Dip Galvanized Heavy Coating Conforming to IS:4826, Hot Dip Galvanized Medium Coating Conforming to IS:4826, Hot Dip Galvanized Light Coating Conforming to IS:4826, Electro Galvanized Heavy Coating Conforming to IS:12753, Electro Galvanized Medium Coating Conforming to IS:12753, Electro Galvanized Light Coating Conforming to IS:12753 Chromating With - 1/3 Net Weight of Barbed Wire in One Reel, (Kg) 30 PACKAGING Reel Metal - Packing Hasian Cloth - Gross Weight (Approx.) of One Reel including Barbed Wire, (Kg) 32 - CERTIFICATION ISI marked Yes Yes CM/L No - - Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab covering all the declared parameters as per IS specification Yes - Test Report No and Date - - Name and Address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Madan Singh 495334, MUNGELI 899 15

hopper or tipper Hopper Or Tipper ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 1478 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) Fuel Consumption ( declared by OEM as 17 1/5 certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) Speed, Max (Km/Hr) 80 - Max Engine Power BHP (BHP@rpm) 58 Max Engine Torque (N-M@rpm) 157.5 Main Engine Aspiration Turbocharged Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 3 Fuel Tank Capacity (Ltrs) 40 Gradeability of Vehicle with load( %) 24 - Gradeability of Vehicle without load ( %) 27 - Ground Clearance (mm) 177 Wheel Base (mm) 2350 - Kerb Weight (Kg) 1295 Gross Vehicle Weight (Kg) 2545 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Manual Manual, Power Operated Turning Radius, Min 480 2/5 (mm) Speed Governers No - ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 3.2 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 12 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 24 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 4485 - Width of Chassis (mm) 1620 - Height of Chassis (mm) 1835 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 355.6 Tipper body Pivot length (mm) 1850 - Tipper body Length (mm) 2450 - Tipper Body Height (mm) 1350 - Overall Height of Tipper from Ground (mm) 2000 - Body Plate Thickness (mm) 1.6 Main Frame Thickness (mm) 1.6 3/5 Pneumatic System false - Hydarulic System true - Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Power Pack Unit - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - If Yes Auxiliary Diesel Power (HP@rpm) 0 Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 1.6 Dumping Height (mm) 450 Engine Oil Pressure Level Indicator in Control Panel false - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel false - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - 4/5 Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rais Khan 464886, BHOPAL - SLWANI MAIN ROAD, WARD NUMBER 3, SILWANI, DIST - RAISEN (M.P.) 2 15

Desktops

backhoes

waste containers or rigid liners- Dust bin or Garbage Bin or Household Bin Average Turn Over of Last 3 Years 2 Lakh (s) Waste Containers Or Rigid Liners- Dust Bin Or Garbage Bin Or Household Bin ( 3000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Utility Domestic Domestic, Public (Mobile containers confirming IS: 12402) ISI Marked No yes, No CM/L No (If ISI Marked Yes) (If No write NA) NA - Class confirming to IS:12402 (For Public Dustbins) NA - Material HDPE HDPE, LDPE, LLDPE, Corr osion free sheet metal, Stainless steel, Stainless Steel (with inner Plastic lining/bin) CAPACITY Bin Capacity (Volume) (Ltrs) 10 Litres 10 Litres DIMENSIONS Wheel Dimension in (mm) (Diameter x Thickness ) (mm x mm) NA - Weight of Dustbin (Complete unit) 405 APPX - 1/3 (Grams) CONSTRUCTIONAL Colour green - Wheel Lock Without - Load carrying Capacity (Kgs) 8 - Wall Non- Perforated - Lid removable - Handle With - Wheel Without - Wheel Material NA - Towage Provision no - Gripping Provision NA - Plugged outlet for washing & draining Without - UV Resistant yes - Dust Bin stand without - No. of Compartments in the Bin single - CERTIFICATIONS Availability of Test Reports from Central Government/NABL/IL AC acredited Lab to prove conformity to the specifications yes - Test report number 5912 - Test report date 07.03.2018 - Name and address of lab CIPET, 630, PHASE IV, GIDC VATVA, AHMEDABAD 382 445 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pranay Shankarrao Tambe 441911, Municipal council tirora near vegetable market taluka tirora district gondia state maharashtra pin code 441911 3000 15

Meeting Table

sofas Sofas ( 21 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Total Number of Seats in the Sofa Set (Nos) 1 As per GeM Catalogue. Type of Sofa and Backrest Seat and Backrest are Removable - Number of Single Seater Units (Nos) 1 1, 2, 3, 4, 5, NO SINGLE SEATER UNIT Number of Two Seater Units (Nos) NO TWO SEATER UNIT 1, NO TWO SEATER UNIT Number of Three Seater Units (Nos) NO THREE SEATER UNIT 1, NO THREE SEATER UNIT Number of Four Seater Units (Nos) NO FOUR SEATER UNITS 1, NO FOUR SEATER UNITS Frame Covering Partially Upholstered Fully Upholstered, Partially Upholstered, Fully Exposed Sofa Set is Foldable to use as bed false - Backrest Cushion Material foam - Density of Cushion of Backrest Material (Kg/Cubic M) 32 - 1/4 Covering Material for Seat and Backrest fabric fabric, rexin, leather fabric, Leatherite MATERIAL Frame Structure Material and size (±1 mm) teak wood of minimum 25 mm thickness 18 mm teak plywood, 19 mm commercial board, teak wood of minimum 25 mm thickness, Carved Teak wood of minimum 25 mm thickness, MILD STEEL STRUCTURE, 19mm thick Commercial Block Board BWP grade Conforming to IS 1659, 19mm thick Decorative Block Board BWP grade Conforming to IS 1659, 19mm thick Commercial Block Board MR Grade Conforming to IS 1659, 19mm thick Decorative Block Board MR Grade Conforming to IS 1659, any other wood of minimum 25 mm thickness Seat Cusion Material foam foam, rubber Density of Cushion of Seat Material ±3 (Kg/Cubic M) 40 - Type of Spring in the Base/Seating Zig zag eight way hand tied spring, sinous spring, web suspension, checking couch spring, No Spring in the Base, Zig zag DIMENSION Length of Single Seater Units in mm (±5 mm) N.A 400, 508, 570, 660, 700, 7 50, 800, 850, N.A Length of Two Seater Units in mm (±10 mm) N.A 800, 1000, 1100, 1220, 1 370, 1400, 1500, 1600, 1 750, N.A Length of Three Seater Units in mm (±10 mm) N.A As per GeM Catalogue. Length of Four Seater Units in mm (±10 mm) N.A As per GeM Catalogue. Depth of Sofa Units in mm (±10 mm) 600 As per GeM Catalogue. Sofa Height (Without 500 - 2/4 Back Cushion) ±5 (mm) Sofa Height (With Back Cushion) ±5 mm 850 - Arm Width ±5 (mm) 100 - Arm Height ±5 (mm) 400 - Seat Height (With Seat Cushion) ±5 (mm) 450 - Sofa Leg Height ±2(mm) 25 - Sofa Leg Width Diameter ±2 (mm) 25 - Seat Cushion Length ±5 (mm) 1200 - Seat Cushion Width ±5 (mm) 585 - Seat Cusion Thickness ±5 (mm) 100 - Backrest Cushion Length ±5 (mm) NA - Backrest Cushion Width ±5 (mm) 585 - Backrest Cushion Thickness ±3 (mm) 100 - Thickness of Foam in arms ±2 (mm) N.A - Thickness of Foam in back ±2 (mm) 76 - Thickness of Foam in front ±2 (mm) 60 - Thickness of Foam in sides ±2 (mm) 50 - COLOUR & FINISH Colour of Polish on exposed Wood frame natural brown - Colour of Covering Material AS PER BUYER'S CHOICE - WARRANTY WARRANTY PERIOD IN NUMBER OF YEARS 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pushpa Sukhwal 313301, LAL BAG, NATHDWARA 21 15 3/4

SPECTROPHOTOMETER SPECTROPHOTOMETER ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values TYPE Type of Spectrophotometer UV - VISIBLE UV - VISIBLE, VISIBLE, UV - VISIBLE - IR Type of Optical System Single Beam Single Beam, Split Beam, Double Beam Monochromator Type Holographic Grating Reflexive Grating, Holographic Gr ating, Czerny-turner, NA Detector Type Photodiode Photo Multiplier Tube (P MT), Photodiode, CMOS, Diode array Spectral Bandwidth Type Fixed Bandwidth Fixed Bandwidth, Variable Bandwidth LIGHT SOURCE Light Source Xenon Flash, Tungsten Halogen Lamp Halogen Lamp, Deuterium Lamp, LED, Tungsten Halogen Lamp, Xenon Flash Diffraction Grating (lines/mm) 1200 600, 800, 1000, 1200, 14 00, 1600, 1800 Switching of Light Source Automatic Automatic, Mannual Wavelength Setting And Scanning Automatic Automatic, Mannual 1/5 OPTICAL PERFORMANCE Source Wavelength - Minimum 200 175, 180, 185, 190, 195, 2 00, 320, 340 Source Wavelength - Maximum 1000 As per GeM Catalogue. Resolution 1 0.002, 0.3, 0.5, 1, 1.25, 1. 5, 1.7, 2 Wavelength Accuracy (+/-) 1 0.1, 0.8, 1.5, 2, 2.5 Bandwidth (nm) 2.0, 5.0 0.1, 0.2, 1.8, 2.0, 4. 0, 5.0, 0 to 5.0 If variable band width, Specify the incremental step value(mm) 1.0 - Scanning Speed (nm/min) 10 - Focal length (mm) 200 to 249 0 to 49, 50 to 99, 100 to 149, 150 to 199, 200 to 249, 250 to 299, 300 and above Photometric measurement modes Absorbance Transmittance, Absorba nce, Concentration (Wavelength, time), Refl ectance, Energy, Polaris ation Photometric Absorbance (Max) (Abs) (+/-) 3 Photometric Absorbance Accuracy (Max) (+/-) 0.002 Photometric Transmittance (Max) (+/-) 90 Photometric Transmittance Accuracy (Max) (+/-) 0.3 Photometric Reflectance (Max) (+/-) 90 Photometric Reflectance Accuracy (Max) (+/-) 0.5 - Stray Light Correction Automatic - Baseline Correction Automatic - GENERIC Display In-built display In-built display, Through PC Display type LCD with Backlight LCD with Backlight, LCD 2/5 touchscreen, TFT, NA Display Size 20 Test result printing Through external printer Through inbuilt Printer, Through external printer If inbuilt printer, Type of printer N/A Thermal printer, Dot matrix, Laser b/w, Inkjet b/w, Color laser, Color inkjet, N/A Suitable software for connecting PC & Printer Yes - Connectivity USB - Internal storage(GB) 0 Sample switching/selection Automatic - Capacity of Sample holder/Sample Carousel 4 - Mximum Path Length of sample 50 Number of Cuvettes supplied 10 10, 25, 50, 100, 200, 300, 400, 500 Power Supply 230 V ± 10, 50 Hz - Spares and Consumables inclusive in the scope of supply false List of Items and Quantity of each item included in the offer - - OPERATING CONDITIONS Minimum Operating Temperature 10 -5, 10, 0, 5, 10 Maximum Operating Temperature 35 35, 40, 45, 55, 60 Operating Humidity (RH) (%) at 40 degree C 80 80, 85, 90, 95 WARRANTY Onsite Warranty 2 1, 3, 4, 5 Availability of Spares (at extra cost) 6 2, 6, 7, 8, 10 Certification Availability of UL/CE Certification as per EN 61010-1:2010 Safety requirements for electrical equipment for Yes Yes, No 3/5 measurement, control, and laboratory use General requirements Conformance to EMC/EMI as per EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use Yes Yes, No Availability of Test Reports from Central Govt/NABL approved/ILAC acredited lab to prove conformity to the specification Yes Yes, No If yes test report to furnished, to the buyer on demand Yes - Test Report number and date - - Name and address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Jitender Kumar Saini 333503, NEEM KA THANA ROAD 1 15

desktop calculator-Electronics Desktop Calculator-Electronics ( 125 ) Technical Specifications Specification Specification Name Values Allowed Values Type Type of Display LCD LCD, LED Details of Digit No. of digits (Min) (Nos) 12 10, 12 Width of each digit(Min) (mm) 4 - Height of each Digit (Min) (mm) 12 - Physical Characteristics Power Source Battery and Solar (Dual) Battery and Solar (Dual), Battery Only Numerical Keys 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, ., 00 - Mathematical Function Keys(min) &radic, &divide, %, &times, =, + - Memory Capacity(Min) (Frames) 417 417, 999 Special character keys (Min) Power ON/All clear, Clear, Memory+, Memory, Memory Recall, Step Check, Review Correct, Auto Replay - * Bold specifications are the golden parameters. Consignees and Quantity 1/2 S.No. Consignee Address Quantity Delivery Days 1 SBS Tekam 495009, Government Engg. College Koni Bilaspur C.G. 125 15

almirah- Steel Experience with Gov. Required 1 Year (s) Almirah- Steel ( 7 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest false - No of shelves (Nos) 4 - Type of Shelves Adjustable - Locker Provided false - Locking System with the locker NA - Cloth hanging provision in the Almirah false - Number of Doors (Nos) 2 - Door Stiffner upto full door height Provided with the almirah doors true - Number of Hinges with each door (Nos) 4 - Number of Glass Sheet fixed in each Almirah door (Nos) N.A - Construction Welded - Lock Three Way bolting device controlled by 6 lever lock - 1/4 MATERIAL Material M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker 1.0 mm - Length of Glass Sheet ±10 (mm) N.A - Width of Glass Sheet ±10 (mm) N.A - Sheet Thickness of door in mm 0.8 mm (Minimum) - Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) - Sheet Thickness of Shelves 0.8 mm - Sheet Thickness of Pedestal in mm 0.8 mm (Minimum) - Material of Lock steel - Material of Keys steel - DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1855 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1 450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 480 430, 455, 480, 486, 270, 3 70, 400 Inside Height of Locker in mm (± 5 mm) N.A - Inside Width of Locker i mm (±5 mm) N.A - Inside Depth of Locker in mm (±5 mm) N.A - 2/4 Width of Stiffner in mm (±5 mm) N.A - Thickness of MS Sheet of Stiffner (in mm) N.A - Stiffened Pedestal height in mm (±2 mm) 120 - Pedestal Width in mm (±2 mm) 70 - COLOUR & FINISH Finish powder coated - Colour of Paint steel gray - Packing: Gutta Packing - CERTIFICATION ISI marked false - CM/L No. - - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Rekha Ranawat 307001, Govt, girls College, SIROHI, RAJASTHAN, 307001 7 15

biometric identification equipment Biometric Identification Equipment ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type Fingerprint Scanner Device for use with Desktop, Laptop, Tablet, POS Device etc. Fingerprint Scanner Device for use with Desktop, POS Device etc., Iris Authentication Device for use with Desktop, POS Device etc. Certification for Device and extractor software/SDK STQC Certified - API/SDK Android 4.0 and Above Windows 7 and above (including Windows based Mobile Phone), Android 4.0 and Above, Linux Integrated USB 2.0 and above Connector Yes - Connector Cable to connect the Device to Micro USB & Standard USB Yes - UIDAI Certified Registered Device (Copy of the certificate to be furnished when Yes - 1/3 demanded by buyer) Conformity to the "Terms and Conditions of UIDAI Certified Registered Device" Yes - Warranty (Years) 1 1, 2, 3, 4 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Laxman HanmantaChalwa di 413001, Solapur Municipal Corporation, Computer Department, Dr.Babasaheb Ambedkar Chowk (Park Chowk) Solapur 50 15

Notebook Computers-laptop

Class Room Desking and Seating Class Room Desking And Seating ( 9 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK Desking Configuration THREE SEATER THREE SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 1400 As per GeM Catalogue. DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18 mm thick prelaminated Particle Board As per GeM Catalogue. Material of Support Structure or Side Pannel Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum Height of Desk Top in mm (±5 mm) 810 As per GeM Catalogue. Width of Desk Top in mm (± 5 mm) 400 As per GeM Catalogue. SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 18 mm thick prelaminated Particle Board 12 mm Thick Plywood Only, 20 mm thick MDF Board of grade SBG II conforming to IS 12406 1/4 mm) laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side, 18 mm thick prelaminated Particle Board, 25 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, 19mm thick Commercial Block Board BWP grade Conforming to IS 1659, 19mm thick Decorative Block Board BWP grade Conforming to IS 1659, 19mm thick Commercial Block Board MR Grade Conforming to IS 1659, 19mm thick Decorative Block Board MR Grade Conforming to IS 1659, 25mm thick prelaminated plywood having 0.8 mm (± 0.2mm) thick prelaminated sheet, ONLY DESK NO SEATING Material of Support Structure Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum As per GeM Catalogue. Material of Seat Cushion WITHOUT CUSHION WITHOUT CUSHION Width of Seating in mm (±10 mm) 360 As per GeM Catalogue. Height of Seat in mm (±10 mm) 460 As per GeM Catalogue. Width of backrest if provided in mm (± 5 mm) 240 As per GeM Catalogue. 2/4 Back Support for Seating of Same materail as Seating Provided without cushion Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) YES - Colour of finish As per buyer's choice - Desk top finishing All sides Edge to be banded with PVC tape of 2 mm thick with help of hot melt glue - Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) 400 - WARRANTY Warranty period in number of years 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shailendra Khare 497001, Government Polytechnic Surajpur C G (Running in Government Polytechnic Ambikapur C G) 9 15

Multifunction Machines

hopper or tipper Average Turn Over of Last 3 Years 70 Lakh (s) Experience with Gov. Required 10 Year (s) Hopper Or Tipper ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of TIPPER Box body Tipper Box body Tipper, Rock body construction Tipper, Garbage Tipper, Other tipper Type of TIPPER if other tipper, please declare type of Tipper, - Main Engine Capacity (cc) 1396 - Make of Chassis - - Type of Chassis Frame - - Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles, Medium Capacity Commercial Vehicles, Heavy Capacity Commercial Vehicles Type of Chasssis Chassis with Facecowl - Type of Fuel Diesel Diesel, CNG Vehicle Emission Complaince bs iv bs iv, BS-III (only for Defence) 1/5 Fuel Consumption ( declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (Ltr/Hr) 17.88 Speed, Max (Km/Hr) 80 - Main Engine Aspiration Turbocharged Intercooled Natural Aspiration, Turb ocharged, Supercharge d, Turbocharged+ Supe rcharged, Turbocharged Intercooled No. of Cylinder in Main Engine (Nos) 4 Fuel Tank Capacity (Ltrs) 38 Gradeability of Vehicle with load( %) 24.93 - Gradeability of Vehicle without load ( %) 25.2 - Ground Clearance (mm) 160 Wheel Base (mm) 2380 - Kerb Weight (Kg) 1100 Gross Vehicle Weight (Kg) 2255 No of Axle (Nos) 2 - Axle Configuration ( Number of Outside Tyre x Number of Driving Tyre) - - Type of Front Axle and Suspension System - - Type of Rear Axle and Suspension System - - Type of BIS MARKED Vehicle Tyre Radial - Chassis Transmission System Manual Automatic, Manual Number of Speed Forward Gears 5 - Type of Steering Power Operated Manual, Power Operated Turning Radius, Min (mm) 5100 Speed Governers yes - 2/5 ABS Fitted No - Front Vehicle Brake - - Rear Vehicle Brake - - Type of Clutch - - Tipping Angle (Degree) 48 Tipper Container cap acity/Volume(cubic metres) 3.2 Certification Chassis Certification ARAI/VRDE/ICAT No. - - Performance Parameters Standard Sparewheel and Tool Kit Yes - Warranty Time (Month) 15 - No. Of Free Service (Nos) 3 - Battery Warranty (Months) 12 - Warranty Distance (Km)(Unlimited during warranty Period) Yes Yes Consructional Parameters Length of Chassis (mm) 4340 - Width of Chassis (mm) 1594 - Height of Chassis (mm) 1858 - Size Of Front Tyres (mm) - - Size Of Rear Tyres (mm) - - Size of Wheel (mm) 14 Tipper body Pivot length (mm) 1546 - Tipper body Length (mm) 2695 - Tipper Body Height (mm) 1082 - Overall Height of Tipper from Ground (mm) 1801 - Body Plate Thickness (mm) 2 Main Frame Thickness (mm) 4 Pneumatic System false - Hydarulic System true - 3/5 Tipping Hydraulic Cylinders(Make) - - Hydraulic System Driven by Main Engine - Auxiliary Diesel Engine for Hydraulic and Pneumatic Operation false - Auxiliary Diesel Engine Transmission - - Auxiliary Diesel Engine fuel tank Capacity (Ltrs) 0 No. of Cylinders in Auxiliary Diesel Engine 0 - Tipper Container Material Mild Steel Mild Steel, Stainless Ste el, Aluminium, Chromiu m Alloy Based Thickness of sheet from tipper Collector Container Made (mm) 2 Dumping Height (mm) 551 Engine Oil Pressure Level Indicator in Control Panel true - Fuel Gauge Indicator in Control Panel true - Engine Cooling Liquid Temperature Indicator in Control Panel true - Operating Hour Meter false - Locking/Unlocking of Tipper Discharge Container Yes - Lowering/Lifting of Tipper Discharge Container Yes - Counter Weight false - If yes Counter Weight (kg) 0 - Paint Automotive Paint - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 4/5 1 Manisha Yadav 301701, NAGAR PALIKA BEHROR 3 45

Restaurant Table

post fence metal angle Experience with Gov. Required 5 Year (s) Post Fence Metal Angle ( 318 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Specification Conform to CQA, EE, Aundh Camp, Pune Specification No CQAE/5660/1609/d of year April 2006 - CONSTRUCTIONAL Angle Size 45 mmX 45 mmx 6 mm - Length of Post Fence Metal Angle (mm) 1830 610, 1830 Minimum Weight 7 Kg for 1830 mm long Post Fence Metal Angle 2 Kg for 610 mm long Post Fence Metal Angle, 7 Kg for 1830 mm long Post Fence Metal Angle CERTIFICATION Availability of Test Reports from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Defence Specification YES - Test report to be furnished to the buyer on demand YES - Test Report No and Date - - 1/2 Name and Address of the Lab - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dinesh Kumar 491001, divional forest office, panch building, jail road Durg 318 15

diesel generators- DG Sets Experience with Gov. Required 6 Year (s) Diesel Generators- DG Sets ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 40 40 No of Phase - Single phase, Three Phase ENGINE Make of Engine - - Model Number of Engine - - Capacity of Engine (cc) - - Engine Power (kWm) - - ISI Marking to IS :10001 for engine false - BIS license No, if applicable - - Type of Engine cooling Liquid Cooled Liquid Cooled Type of governer Electronic Electronic Class of governer A0 A0 Number of cylinders (nos) 4 - No of Strokes (nos) 4 - Rated RPM of Engine - 1500, 3000 1/4 (RPM) Overload capacity for one hour for every 11 hours continuous running at full load (%) 10 - Specific Fuel Consumption (gm/kWh) - - Starting voltage (volt) 12 - ALTERNATOR AC GENERATOR(ALTER NATOR) Make - - AC GENERATOR(ALTER NATOR) model Number - - Rating of AC Generator (KVA) 40 - Power Factor of AC generator 0.8 - Efficiency at rated Power factor at 75% of full Load 89.9 - Compliance of Alternator to IS:13364(part-1) Yes - Type of alternator Brushless - Voltage Regulation Grade VG 3 - Alternator IP Rating IP 23 - Class of Insulation H - CONTROL PANEL Control Panel AMF AMF IP Rating of Control Panel IP 53 - ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6, 1.8, 2, 1.2 Thickness of Foam 40 - Density of Foam for sound insulation 32 - Noise level at 1 meter (dB) 75 - BATTERY Battery Type & Specification Low Maintenance free to IS: 14257 for high cranking performance - Battery capacity (Ah) - - No of batteries 1 - TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory Yes - 2/4 Test Report number and date(Engine) - - Name and address of laboratory(Engine) - - Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory Yes - Test Report number and date(Alternator) - - Name and address of laboratory(Alternator) - - DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes - WARRANTY INSTALLATION & COMMISSIONING Warranty 2 2.0 Installation & Commissioning Without Installation With Installation, Without Installation Agreed to STC of the Product Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Premjit Tripathy 762001, CDM & PHO Office, Near Medical Square, Phulbani, Kandhamal, Odisha 1 15