S.M.S. Medical College-Jaipur Tenders

(UncementedTHR) Metal On Poly [MOP] All should be of Same Make A) The femoral Stem should have morphometric wedge geometry and HA coating, HA coating of 50-micron or above. Proximal body on porous coating over a grit blasted surface, Incremental Neck length options, two offset options minimum and made up of Ti Material/COCR, Should have neck that provides Greater range of motion,should have 12/14 or 11/13 Taper Design as per international standard norms. B) The Acetabular Cup should have a liner stability locking mechanism for such as XLPE liner locking mechanism, Ceramic Liner Locking mechanism. The locking mechanism should be present lower in the shell so as to reduce opportunity for soft tissue impingement and spread stresses over a greater surface area.The Shells upper surface is composed of porous coating of above 200 microns.. The acetabular shell should have 3 Hole option/ multihole option as per standard norms. The Acetabular Shell sizes should come in sizes from 42 to 62 mmand made of titanium /COCR. C) The Polyethylene has neutral/ 0-10/0-20 degree posterior superior lip-[LPW] preferably all options. The Polyethylene is compatible to accommodate 28mm, 32mm, and 36mm heads. Should be madeup of Highly Cross linked Polyethelene D) Femoral heads should be Metal Head COCR/TI material with all sizes 28mm/32mm/36mm with atleast 4 variable neck length. E) Acetabular Shell Screws 5-7 mm Should be made up Of Titanium/COCR size range from 15-50mm in length

Radiant heat warmer

Hand Held Doppler

Defibrillator

Single plain cath lab on turnkey basis (Cardiology department for Cardiac tower)

Select, Excess (+), Less (-)