Sail Refractory Unit Tender Results

Goods Transport Services - Per MT - VOLUMINOUS RAW MATERIAL; Open Body Taurus; 35 MT CARRYING CAPACITY

PLASTIC CLAY

HIGH TEMPERATURE EXTRA HARD PITCH

Top Pressure Cylinder Assly. with Piston Covered with collapsible Bellow for Deepak Hydraulic Press, Bottom Pressure Cylinder Assly. with Piston Covered with collapsible Bellow for DeepakHydraulicPress

Procurement of spares for air compressor (Atlas Copco make)

Sodium Di-chromate

PROCUREMENT OF METALLIC MOULDS FOR DOOR BRICKS

Ambuja cement Ordinary Portland Cement Confirming to IS 269 - OPC 53 Grade 50Kg

Refrigerant R407C FOR AIR COOLED OIL CHILLER OF 6 TR CAPACITY, Oil Pump 1.5 HP FOR AIR COOLED OIL CHILLER OF 6 TR CAPACITY

IN ATC, Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Jobs of main gear boxes of Dry Mixers Repairing of main gear boxes by dismantling and changing of damaged parts; AS MENTIONED IN ATC, and Installation of Plant/Systems/Equipments (Version 2) - Manufacturing Unit; Changing of Drive Shaft of FSP-150T; AS MENTIONED IN ATC, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Repairing of Tail Drum/Head Drum of Dry Mixer C/B; AS MENTIONED IN ATC, and Installation of Plant/Systems/Equipments (Version 2) - Manufacturing Unit; Repairing of plunger of FSP-150T; AS MENTIONED IN ATC, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Repairing jobs on spring table of FSP-150T; AS MENTIONED IN ATC, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Changing of bushes of main drive shaft of Dry Mixer; AS MENTIONED IN ATC, and Installation of Plant/Systems/Equipments (Version 2) - Manufacturing Unit; Dismantling and fitting of table cylinder with piston of Laeis presses including changing of seals tapping as required; AS MENTIONED IN ATC, and Installation of Plant/Systems/Equipments (Version 2) - Manufacturing Unit; Dismantling/fitting of top/bottom cylinders of Deepak presses including changing of piston cylinders/rings as required; AS MENTIONED IN ATC, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Dismantling/fitting of friction Disc Assly; AS MENTIONED IN ATC, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Changing/Repairing of Top/Bottom/Other tie rods of FSP- 150T; AS MENTIONED IN ATC, and Installation of Plant/Systems/Equipments (Version 2) - Manufacturing Unit; Changing of bearings of spindle of FSP- 150T by dismantling & fitting of friction wheels and fly wheels All related jobs to be completed; AS MENTIONE.., and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Tightening of columns of Laeis Presses including changing of bolts if required; AS MENTIONED IN ATC, and Installation of Plant/Systems/Equipments (Version 2) - Manufacturing Unit; Repairing jobs in base plate of Laeis Presses including dismantling of all base plates, drilling tapping etc as required; AS MENTIONED IN ATC, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Dismantling and fitting of Batch weigher hopper gear boxes etc for changing of load cells including repairing of leakage; AS MENTIONED IN ATC, and Installation of Plant/Systems/Equipments (Version 2) - Manufacturing Unit; Dismantling and fitting of Electromagnets in Dry Mixers/Mill House; AS MENTIONED IN ATC, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Changing of base plate of Dry Mixers; AS MENTIONED IN ATC, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Casting of lower upper bearing half for FSP-150T including dismantling and fitting in Machine; AS MENTIONED IN ATC, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit;, and Installation of Plant/Systems/Equipments (Version 2) - Manufacturing Unit; Changing/Cleaning of heat exchanger/Cleaning of oil tank in Laeis/Deepak Presses; AS MENTIONED IN ATC, and Installation of Plant/Systems/Equipments (Version 2) - Manufacturing Unit; Dismantling, fitting & fabrication of chute/hopper in dry mixer pit; AS MENTIONED IN ATC, and Installation of Plant/Systems/Equipments (Version 2) - Manufacturing Unit; Gear box changing in batch weigher including repairing; AS MENTIONED IN ATC, and Installation of Plant/Systems/Equipments (Version 2) - Manufacturing Unit; Pump changing in Laeis presses/deepak presses; AS MENTIONED IN ATC, and Installation of Plant/Systems/Equipments (Version 2) - Manufacturing Unit; Repairing of Raw Material Silo Gate Assembly; AS MENTIONED IN ATC, and Installation of Plant/Systems/Equipments (Version 2) - Manufacturing Unit; Unforeseen breakdown in press maint section; AS MENTIONED IN ATC

PROCUREMENT OF DIFFERENT TYPES OF INDUSTRIAL

PROCUREMENT OF VARIOUS SPARES FOR MILL HOUSE

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Industry Unit; Steel Melting Shop(SMS)- Steel Ladle Lining, Addition of Slag modifier in Ladles at ASP Durgapur.; As per ATC

Country Jute Twine (V2) asper IS1912 (Q3)

Custom Bid for Services - CLEANING AND REPAIRING OF 70 NOS SEWERAGE CHAMBERS OF RESIDENTIAL COLONY SRU BHANDARIDAH Similar Category Manpower Outsourcing Services - Minimum wage Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) Repair, Maintenance and Installation of Plant Systems/Equipments

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Servicing of three number of Axial Piston Pump Make Rexroth Model A7VO250; As per ATC

Side liner part no 12 as per Drg no. 1102-2, Side liner part no 13 as per Drg no. 1102-2, Ball mill base liner as per Drg no. 1124

Calcined Bauxite Grade M ( Al? O? -80% )

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Comprehensive AMC of WD-XRF, Leneo Fusion Bead, XRF Air Compressor Unit, vacuum pump, chiller unit and application support with contract duration for..

IGBT Inverter based Rectifier Type DC Arc Welding Set Suitable for SMAW/MMA Welding Process with VRD

Alumino-Ferric (V2) Conformingto IS299 (Q3)

Pan Mill/coke grinding mill/double roller crusher of capacity 5 TPH.

Non-Woven Polyester, Oil & Water Repellent Dust Filter Bags Drg. No. SRU/IFI/De-System/Filter Bag/01, Filter Bags Cage (As per Drg. No. SRU/IFI/De-System/Filter Cage/01), Pilot Operated Pulse Valves for Reverse Pulse-Jet Cleaning of Bag Filters, Model-MEP-114 (1½ " )

Forklifts (V2) as per IS 6765:2003 and IS 10517 (Q2) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 7 Bid Number : GEM/2025/B/6900393 Dated : 17-11-2025 Bid Document 1/8 Number of Auto Extension count 1 Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination ITC available to buyer Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 3.00 ( ) Duration of ePBG required (Months). 9 (a)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : SENIOR MANAGER (MM) SRU SAIL, Steel Authority of India Limited, SAIL Refractory Unit, Ministry of Steel SAIL REFRACTORY UNIT (S.R.U), Bhilai Maroda Chowk, PO- Civic Centre Bhilai Chhattisgarh – 490006, INDIA (Bhavya Ganvir) 2/8

Split Air Conditioner, Wall Mount Type (V3) ISI Marked to IS 1391 (Part 2) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Experience Criteria, Certificate (Requested in ATC), Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3, -- Number of days for which Bid would be auto -- extended 10 Bid Number : GEM/2026/B/7071213 Dated : 12-01-2026 Bid Document 1/7 Number of Auto Extension count 1 Bid to RA enabled No ITC available to buyer Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No

Planetary PAN Mixer of 1000 kg per batch for DRY mixing of Castables.

Inductive Proximity Switch, Supply: 220-240V AC, Logic: NO., Inductive Proximity Switch, Supply: 24 VDC Logic: PNP, NO, Capacitive Proximity Sensor, Supply: 24 VDC Logic: PNP, NO

Custom Bid for Services - Comprehensive maintenance and servicing of 34 number window or split Air Conditioner 1 point 5 and 02 Ton make LG Voltas and 04 number of Drinking Water Cooler at SRU-IFICO Similar Category Comprehensive Annual Maintenance Services for Precision Air Conditioners

Alumino - Ferric (V2) Conforming to IS 299 (Q3), Stable Bleaching Powder for Household and Industrial use (V3) conforming to IS 1065 (Part 1) (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Procurement of Grinding segments and Discs

SILICA SAND

Custom Bid for Services - Comprehensive AMC for LAN equipment of all 50 numbers nodes at server room to each department and supply of spares for LAN of all 50 numbers nodes as and when required, Custom Bid for Services - Supply and installation of 24 core armored OFC with GI poles joint boxes UPS systems clamps and cable casing along with 32U server rack as per ATC Similar Category Internet Bandwidth and Replication Service Cluster Outsourcing for Maintenance of Landline and Broadband network – OFC Network Internet Connectivity Annual Maintenance Contract for Network Security Devices Internet Bandwidth and Replication Service Internet Connectivity

Custom Bid for Services - THIRD PARTY QUALITY CONTROL TESTING AND INSPECTION FOR REPAIRING OF CONNECTING ROAD FROM IFICO STEEL GATE NEAR T AND D CENTER GUEST HOUSE SIDE TO ARGADDA MAIN ROAD Similar Category Hiring of Third-Party Inspection Agency

Sodium Hexametaphosphate (ONGC) (Q3)

Custom Bid for Services - Grinding of different type of refractory raw materials in pilot plant for Mortar and manufacturing of masses in the main plant Similar Category Hiring of Earth Moving Equipments, Material Handling Equipments and Cranes (per Hour basis)

DEAD BURNT MAGNESITE (0-2 MM)

HSS Tap Set Size 4 mm 1 set equal 3 Nos, HSS Tap Set Size 8 mm 1 set equal 3 Nos, HSS Tap Set Size 10 mm 1 set equal 3 Nos, HSS Tap Set Size 12 mm 1 set equal 3 Nos, HSS Tap Set Size 16 mm 1 set equal 3 Nos, HSS Tap Set Size 20 mm 1 set equal 3 Nos, HSS Tap Set M 3 BY 8 INCH 1 set equal 3 Nos, HSS Tap Set M 5 BY 8 INCH 1 set equal 3 Nos, Adjustable Tap Wrench Size 12 INCH, HSS Tool Size 1 BY 2 INCH X6 INCH Grade S 400, HSS Tool Size 1 BY 2 INCH X 4 INCH Grade S 400, HSS Tool Size 3 BY 4 INCH X 4 INCH Grade S 400, HSS Tool Size 1 INCH X 6 INCH Grade S 400, Tungsten Carbide Tip Tool Milling Machine Size 12X12 mm, Tungsten Carbide Tip Tool Size 12X12X100 mm, Tungsten Carbide Tip Tool Size 20X20X125 mm, HSS Cutting Tool 3 BY 8 INCH X 3 INCH Long for Lathe Machine Grade S 500, HSS Cutting Tool 1 BY 2 INCH X 3 INCH Long for Lathe Machine Grade S 500, HSS Cutting Tool 1 BY 4 INCH X 4 INCH Long for Lathe Machine Grade S 500, HSS Drill Bits Straight shank dia 4 mm Drilling application metal, HSS Drill Bits Straight shank dia 5 mm Drilling application metal, HSS Drill Bits Straight shank dia 6 mm Drilling application metal, HSS Drill Bits Straight shank dia 6 POINT 5 mm Drilling application metal, HSS Drill Bits Straight shank dia 8 mm Drilling application metal, HSS Drill Bits Straight shank dia 8 POINT 5 mm Drilling application metal, HSS Drill Bits Straight shank dia 10 mm Drilling application metal, HSS Drill Bits Straight shank dia 10 POINT 5 mm Drilling application metal, HSS Drill Bits Straight shank dia 12 mm Drilling application metal, HSS Drill Bits Taper shank dia 14 mm Drilling application metal, HSS Drill Bits Taper shank dia 16 mm Drilling application metal, HSS Drill Bits Taper shank dia 17 POINT 5 mm Drilling application metal, HSS Drill Bits Taper shank dia 18 mm Drilling application metal, HSS Drill Bits Taper shank dia 20 mm Drilling application metal, HSS Drill Bits Taper shank dia 24 mm Drilling application metal, HSS Drill Bits Taper shank dia 28 mm Drilling application metal, HSS Drill Bits Taper shank dia 30 mm Drilling application metal, HSS Drill Bits Taper shank dia 35 mm Drilling application metal, HSS Drill Bits Taper shank dia 40 mm Drilling application metal, HSS Drill Bits Taper shank dia 45 mm Drilling application metal, DRILL SLEEVE 0 1, DRILL SLEEVE 3 4, Power Saw Blade HSS 24INCH X1 POINT 5INCH X 6 TPI, 14 Gauge, LPG Industrial Cutting Regulator ISI Mark, DIGITAL VERNIER CALIPERS WITH NABL 12 INCH 300 MM

Custom Bid for Services - COMPLETE REPAIRING OVERHAULING OF HYDRAULIC PUSHER CYLINDER & MASTER CYLINDER INSTALLED IN SRU-IFICO Similar Category Repair and Overhauling Service Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2)

Diamond impregnated drill bit (O. D. 63MM)

Custom Bid for Services - FEEDING OF BAGGED OR UNBAGGED MATERIALS IN BUCKET ELEVATOR CHUTE OF BALL MILL TUBE MILL ETC IN MILL HOUSE Similar Category Handling and Transport on Lumpsum Basis Handling, Transport and Other Mining Services - Percentage quote based

Gamchha (Q3)

Tubular type industrial man cooler fan

Wooden Pallets (920x920), Wooden Pallets (810x920), Wooden Pallets (710x920), Wooden Pallets (610x920)

HMI (HUMAN MACHINE INTERFACE) AND PROGRAMMING FOR PLC FOR MIXER NO. 11

CALCINED MAGNESIA CARBON GROG (90% MGO)

Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Annual maintenance of reciprocating air compressors Make Kirloskar Pneumatic Company Limited KPCL Model 2HA4TER 03 Number and 1HA2TER 01 Number); Ser..

Chromite For Refractory Industry

Facility Management Service - Outcome Based

Custom Bid for Services - Lifting of bagged materials from shop floor to batch weighed platform at SRU Bhandaridah Similar Category Hiring of Earth Moving Equipments, Material Handling Equipments and Cranes (per Hour basis)

Hopper Tipper Dumper for Garbage (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No