Loading…
Loading…
1,021 results • Latest
BZA-SURG(PH NO.:31021) HEAVY WEIGHT COTTON CREPE BANDAGE B.P. WITH FAST EDGES 15 CM X 3 MTR (STRETCHED LENGTH) FDA APPROVED
BZA-SURG (PH NO.:31014) BLOOD SETS - DISPOSABLE STERILE CE/ISI CERTIFIED
Supply of " Set of APD's suitable for Escorts design BMBS system set consist of (1)APD for brake cylinder-1 No's (2) APD for bell crank and push rod-2 No's (3) APD for pin bell crank lever-1 No's (4) APD for pin push rod and secondary beam-2 No's (5) APD for brake head pin with split pin-4 No's. Make: Escorts or similar. "
STAINLESS STEEL INLAY FOR INDIAN STYLE LAVATORY CONFORMING TO ICF DRAWING NO. ICF/STD-4-1-002, COL - V, ALT : x / 2 (ITEM SHALL BE WRAPPED IN THICK BROWN PAPER AND PACKED IN CASES FILLED WITH STRAW ( AS PER PARA 10 OF IRS SPEC. R-28 )
Rubber Spring plate for outer end to Escorts Drg No:SK/343 or similar. Escorts Drg No:SK/343 or similar.
SUPPORTING HOOK FOR SCREW COUPLING TO ICF DRG NO : T-2-3-013, Col. I ALT : k / 3.
Pair of welders hand gloves (One pair consists of LH & RH) Type-1 confirming to IS:2573/1986 (Reaffirmed 2003) except size. The total length (L) of the hand gloves shall be 450+/-5 (18"), as against the sizes mentioned under para 3.2 of IS: 2573/1986, Also the hand width size shall be 5.5"(min) and cuff width size 7" (min) as against para 4.3.1.1 of IS; 2573/1986. The item shall confirm to test parameters as per IS:5914/1970. The item shall also confirm to the following. 1) The gloves shall be made of split leather. 2) The gloves shall be dyed in dark rust /blue/black colour.
HINGES BUTT STEEL HEAVY WEIGHT SIZE 75 X 60 X 3.15 mm MTL.SPEC: IS:1341/92 TABLE-6.
Supply of Control cards for COACH INDICATION BOARD as per RDSO Specification No. RDSO/ SPN/ TC/ 108/2015 Rev.4.0 Amdt-1
LED 60W Street Light, Rated Voltage: 270V 50Hz, ingress Protection: IP66, as per Specification attached.
Arc Welding Machine 300Amp, Rated Input Power (In kVA) : >=5<=10, Power Supply : 230 V Single Phase (50/60Hz).
Slogging Ring Spanner 46mm conforming to IS: 4509:1992 or equivalent (Accepted makes: Taparia or Snap-on or Stanley or Armstrong or equivalent)
ROD LATCH SUITABLE FOR CLOSING OF DOOR OF SWITCH BOARD CABINET CONTROL PANEL OF LHB TYPE A.C. COACHES 5116877-52168944486 and as per Specification No. RDSO/PE/SPEC/AC /0184-2015 (Rev 2) & RDSO letter no. EL/7.1.108/ MSSBC dated 17.09.2021, accepted Make- Dirak part no 208-9025.00-00000, Arihant, southco, darshana.
(PH No.:925030) Spirometry PFT Filters suitable for PFT Machine ,UNIT:NUMBER
(PH NO.:319508) QUALITY CONTROL FOR HAEMATOLOGY ANALYSER LOW NORMAL, NORMAL AND HIGH NORMAL PARAMETERS,UNIT:PACK
XLPE Cablefor Working Voltageuptoand Including1.1 KV Marked To IS7098 (Part1) (Q2)
Anti Wear Hydraulic Oil (V5) Conformingto IS10522 (Q2)
Toner Cartridges/Ink Cartridges/Consumablesfor Printers (Q2)
[PH.No.347022] Diluent for Meril 5 part plus Hematology Analyzer - 20 Litre pack
[PH.No.347012] Lyse Solution for Meril 5 part plus Hematology Analyzer - 500 ml pack
[PH.No.347013] Lyse Solution (FBH) for Meril 5 part plus Hematology Analyzer - 500 ml pack