South Central Railway Tenders

Pin for lever hanger complete assly. to RDSO drg. no. SK-98026 Alt-1, item-7 to 11. Matl.& Spec. of item no. 10 is IS:2232/67 Rev-1 Amndt.-3, other items As per drg.

SET OF GASKETS

1-1/4 Inch isolating cock with vent

Pressure Sensor Unit (MPS-841) for MRPT

White Contrast paint for crack detection by MPT

Circuit breaker without Auxiliary contact 63A , AC (Pos no 53.1 , 59.1) type-17, as per CLW Specification No - CLW/ES/3/0096 Alt-L or Latest for Traction Motor Blower and Oil colling unit.

Set of Hinges for AC Elec Locos

Set of Teflon washers

SET OF HARDWARE ITEMS

Axle cap bolt for Hitachi Traction Motor

Supply, installation & commissioning commissioning of Colour laser network printer A3

3/8 inch Isolating cock W/O Vent OLP

: Flat Brushes heavy duty for Paints and Varnishes size 100mm rubber set confirming to specification as per IS-384 (Part-2):2012 or latest with natural black soft or semi-stiff bristles (IS 1844) with any type setting. Material of Bristles: hogs & pigs only.

TOOL KIT FOR ELECTRIC POINT MACHINE

COUPLING FLEXIBLE PIPE

FLOOR MOUNTED PORCELAIN COMMODE

SET OF ITEMS

Supply, installation & commissioning of High end Desktop PC

Earth carbon brush, as per CLW Specification No.CLW/ES/3/0017 Alt D (scope of supply as per sheet No-10)

Paper Masking Tape 48mm width x 40mtrs. length, conforming to RCF specification No.PST/2326/SPEC/MT Rev.1.

Name of the work:- Provision of RDSO type Fire & Smoke detection Alarm system with Fire aspiration system at all the interlocked LC gates and Intermediate Block signalling huts over Secunderabad Division.

(1) Trd Arrangements-Interlocking of Three (3) No's of manned Non interlocked Level Crossing Gates (LC.No.. 42,24 & 15 ) of NZB-PDPL Section. (2)Provision of ATs in connection with two numbers of end goompties at RGPM station and one gumpty at PPZ station.(3)Proposal for construction of RBG & End GMTYs at RDM station-TRD Arrangements-Reg.

High capacity Locomotive Side Buffer assembly as per RDSO Specification No. MP0.41.00.03 (Rev 03) of Aug 2024 and Drawing No.SKDL 4725.

Requirement of Medicines at DRH/GTL-Reg

Cable Socket for Cable 300 sq.mm

ISO PROPYL ALCHOL

Set of Pins for Brake Hanger of WAP4 Locos Each Set consists of 8 items. 1) Pin for Brake Head Hanger Lever. CLW Drg.. No. 03/4/19/76 Qty. 04 nos. 2) Pin for Air Brake Cylinder Lever, CLW Drg. No. 03/4/19/77 Qty.12 Nos. 3) Pin for Brake Cylinder Push Rod, CLW Drg. No. 03/4/19/78 Qty. 12 nos. 4) Pin for Brake Head Hanger CLW Drg. No. 03/4/19/75 qty. 24 nos. 5) Pin for End Brake Hanger Lever, CLW Drg. No. 03/1/19/36 Ref. no. 77 Qty. 08 nos. 6) Pin for Clevis CLW Drg. No. 03/1/19/36 Ref.78 Qty. 24 nos. 7) Pin for Brake Hanger Lever CLW Drg. No. 03/1/19/36 Ref.69 Qty. 12 nos. 8) Pin for Brake Hanger Lever. CLW Drg. No. 03/1/19/36 Ref. 37 Qty. 12 nos. as per Drg.No. CLW Drg.. No. 03/4/19/76 Qty. 04 nos. (As per UVAM ID:2101026).

Supply and installation of Automatic fire alarm and fire aspiration system comply with RDSO Specification No. RDSO/SPN/217/2025, Version 3.1 or the latest applicable version at 14 stations /locations over SC Division. (the item wise and quantity details are attached as Annexure)

pump spares and hydrometer

Hand Wheel spindle along with M-27 Nut & STD Washer for BOXNHL Wagon. Drawing -RDSO Drg. No.- WD-09057-S-01, Item No.2, Alt. 03. Mat. Spec.As per drawing .

SET OF GEAR CASE FELT SEALS

PIN ELECTROPLATED DIA 50 X 160 L FOR BRAKE GEAR TO ICF DRG. NO. T-3-2- 648 ALT. `h' ,IS:1875-92 CLASS-2, Item No. 4. COL-II, GRINDING & ELECTROPLATING TO BE DONE AS PER NOTE 4 OF DRG. NO. T-3-2-648 ALT-h.

MS Bolt size of M10*50mm

Set of FIXTURE FOR LHB CONTROL ARM

Equalising Stay Pin Short with collar to Drg. No. WLRRM -0-5-003 Alt. G/9, Item No. 11 & 13.

Sandering Polish Abrasive Disc

Set of Hardware Items for WHEEL SE

COVER SHEET OUT SIDE LAVATORY

PIN ELECTROPLATED FOR ICF BOGIE TO RDSO DRG. NO. SKETCH 93186. ALT-3, ITEM NO. 2. MATERIAL AND SPECIFICATION AS PER DRAWING.

(PH NO.:86058) Sodium Fusidate 2% (Fusidic Acid) 5 gms Cream/Ointment,UNIT:TUBE

KVA ,750 V AC onload switching under AC-6a category at temperature of 70 degree centigrade & coil voltage of 110 V+ 25%-30% DC with surge suppressor ,2 NO+2 NC for LSLRD coaches as per RDSO specification no .RDSO/PE/SPEC/TL/0195-2019 (Rev.-0)or latest. Accepted makes as per above spec.: ABB ModelNo.AF1250-30-11, L&T Model No. MVO 820, Siemens Model No3TF69338 DF4Z A02+3TX75723H Only.

Multi colour DJ DISCO light for party,concert etc,60 LED,ROUND SHAPE ,LIGHT OUTPUT MAXIMUM 1000 LUMENS, 100 WATTS,CEILING MOUNT,ELECTIC CORDED,BULB BASE E26.

High performance quick drying epoxy

Single phase, 1 Element, 2 Wire 230 V Digital power factor meter. Technical Specification attached.

Air Blower with battery and battery charger as specifications attatched

SUPPORT FOR LONGITUDINAL LOWER BERTH Conforming to ICF Drawing No. LWACCN/EOG-6- 1-027, Alt.- a/Nil or Latest.

Hammer Keying 3.2 Kgs ( 7.05 Lbs ) as per attached drawing and IS 841 / 1983 or latest Table No. 11., Brand - Jhalani / Taparia / Deneers or Similar Firm's offer accepted - Material is Class 4 Composition and tolerance 7.5 percent as per IS 841/1983.

Power Transmission Assembly for Electric Point Machine (143 mm)

white web belt with Rexene and Buckle with following specifications:made from 100% cotton material,width 1.25",Length :54", Thickness of 05mm Buckle belt is made from Metal(Brass/Gold or Chrome/Silver),All Belt tips Match Belt Buckle.

HEX HEAD BOLT M8X35 for phonic wheel of CTRB, Confirming to RDSODrg.No.CG-15071 and IS:1364-2002, PT-1, IS:1367-2002, PT-III, 10.9, CE, MDTS-057. MAKE:: TVS,TUFF,DFL or UNBRAKO only.