Loading
Loading…
Loading…
17,152 results • Latest
125mm Cordless Battery operated angle grinder, to model no: GWS 18V-15C
Spring for Reversor as per CLW specification No.4TES.101.003,
Element air cleaner (outer) to Fleetguard part no. AF879M or to Donaldson part no.P182038 or to CIL Pt. No.3875391 or equivalent.
SPRING FOR E.P.CONTACTOR AS PER S.C.RLY DRG NO.B/TRS/HTC/4/58, ALT-B.
Monthly Basis Cab & Taxi Hiring Services - MUV; Guntakal Division Hiring of Non AC base Model Pickup Van (MUV) of 1 tonne & above capacity to SSE/TrD/VKI Depot for OHE/PSI Breakdowns and Inspections for a period of 24 Months; Outstation 24*7
(PH NO.:54006) HUMAN ALBUMIN 20% 100 ML INJECTION,UNIT:BOTTLE
Custom Bid for Services - Schedule A Hiring of Vehicle for Four and Half Tonne for SSE PWay YA 1 Vehicle for a period of 24 months in ADEN HX Sub Division under Sr DEN South Jurisdiction, Custom Bid for Services - Schedule B Extra over Schedule A Similar Category Goods Transportation service - Monthly Based Service Goods Transportation service - Monthly Based Service
VISITOR CHAIRS, OFFICE MODULAR TABLE, COMPUTER CHAIR, DINING TABLE WITH 4 CHAIRS, RECEPTION TABLE/COUNTER TABLE, 3+ 2 SOFA SEATER
(PH NO.:06001) AMIKACIN SULPHATE 500 MG INJ,UNIT:VIAL
(PH NO.:08026) GABAPENTIN 100 MG WITH METHYLCOBALAMINE 500 MCG TABLETS,UNIT:TABLET/CAPSULE
Operation & Maintenance (O&M) Service Contract for TRT Machine No.6122392 of SC Railway for a period of Two (02) Years.
Hyderabad Division: NH-161BB- Widening to 2 lane with paved shoulders of 'Bodhan- Basar- Bhainsa' section from km. 38/900 to km. 95/300 of NH-161BB in the state of Telangana under Annual plan 2021-22 on EPC mode under NH (O)- Proposed construction of 4 lane ROB at km.437/4-5 between Basar- Navipet stations on SC-MUE section of Hyderabad Division on Fakirabad bypass on NH 161BB at km 61+569- shifting of Electric Mast for Launching of Bowstring Girder for 2 X60.0 m as per Drawing No. RDSO/B-10415/R Series, for ROB km 61+569- Electrical TRD Arrangements.
Hyderabad Division: Provision of Cameras to Lifts over the Division.
Hyderabad Division: 1) Replacement of Panel Interlocking both indoor and outdoor by Electronic Interlocking System at CVB Station on HUN/HDN Routes- Electrical Arrangements 2) Signaling arrangement in connection with Interlocking of LC Gate No:103 at Km no.194/800-900 between GWD-PDO Stations- Electrical arrangements 3) Signaling arrangement in connection with Interlocking of LC Gate No:231, 235 & 238 on STPD-MUE Stations - Electrical arrangements
Insulating Base For Jumper Plug Assembly (With Fixing Screws) For Inter Vehicular Coupler
Set of Hardware items for MSU tubes in conventional locos.
SET OF SPARES FOR AIRLESS SPRAY EQUIPMENT 1/4 INCH H.P PAINT SPRAY HOSE 10MTR LONG, I.D 6.4MM, WORKING PRESSURE 320 BAR, BURST PRESSURE 1280 BAR, END FITTINGS OF 1/4 INCH BSP FEMALE SWIVEL FITTINGS INNER TUBE: POLYAMIDE, REINFORCEMENT: SINGLE BRAIDED OF STEEL WIRE, PU COVER. MAKE: VR COATINGS/ POLYHOSE, PARKER/SUPER SEAL OR EQUIVALENT.
12 mm Steel wire rope as per (IS - 2266/1989) construction: 6 x 36 CWR, ORHL, Ungalvanized, 1770 N/KN. MAKE : Mahadev (or) safe lift (or) Simplex (or) Spanset (or) Mayur (or) Usha Martin. Test certificate from Govt. Authorized test house to be provided along with the material supply.
Set of spares for Airless spray equipment: 3/8 inch H.P PAINT SPRAY HOSE 10MTR LONG, I.D. 9.5MM, WORKING PRESSURE 250 BAR, BURST PRESSURE 1000 BAR, INNER TUBE: POLYAMIDE, REINFORCEMENT: SINGLE BRAIDED OF STEELWIRE, PU COVER. Make: VR Coatings/Polyhose, Parker / Super Seal or EQUIVALENT.
Single phase, dry type and air cooled control transformer
Synthetic oil combination base oil with Lithium/ Calcium thicker, denomination according to DIN 51502: MPFE 00 G -35 Standard for wheel flange lubrication system.
Supply, Installation & Commissioning of HP Workstation with Intel Core i7- 13700 Processor 16 GB RAM AS PER SPECIFICATION ATTACHED
Supply of ATEN Analog 8 Port KVM Switch (as per enclosed specification) Brand: ATEN or its equivalent.
Safety Goggles Designed to effortlessly fit over
KNUCKLE PIVOT PIN WITH WASHER
SW-I: -Secunderabad Division - BPQ-KZJ Sections: Widening/repair of Cess ,filling up of low lying areas near toe of bank, providing Toe bank, & Precast / Cast insitu RCC central Drain & cross drain HDPE through the Railway formation at a required depth to the required slope etc. for a total length of 7.93Kms. in SSE/P.Way/MAGH&MCI section under ADEN/BPA & ADEN/RDM Sub-division. SW-II: - BPQ - KZJ section: Cutting the slopes to avoid loose earth filling inside drains and blocking drainage at KM.144/4-24 in between Manikgarh and Whirgaon stations in ADEN / BPA subdivision. SW-III: BPQ-KZJ section: Removal of earth heaps obstructing visibility of DN & BD lines in cuttings at KM 192/0-32 in between SKZR- SRUR stations in ADEN / BPA subdivision.
SW - I - Replacement of 6 nos Type-II quarters and 2 nos. Type-III quarters at WIRUR station under Sr.ADEN/BPA sub division. SW-II - Construction of Type II Quarters -6 Nos. at Makudi station under Sr.ADEN/BPA sub-division in Sr.DEN/North jurisdiction.
Asifabad road - Replacement of 8 nos. Type-II quarters and 2 nos. Type-III quarters at ASAF.
Extention of High level platform No.1 at Lingampet Jagityal in ADEN/KRMR in DEN/NW/SC jurisdiction.
SC-KZJ Section: Proposed ancillary works such as improvements to drainage arrangements, cover over to approach roads and etc. for RUB No. 439A (LC No. 51) at Km. 310/20-22 between GNP-NSKL stations.
Raising of platform from Medium level to High level at HER under ADEN/BIDR sub division in DEN/North-West Jurisdiction.
Raising of Platform from Medium level to High level at Chakur (CKX) under ADEN/BIDR sub division in DEN/North-West jurisdiction.
High End Laptop-Notebook (Q2)
Monthly Basis Cab & Taxi Hiring Services - MUV; 2500 km x 320 hours; Outstation 24*7
Monthly Basis Cab & Taxi Hiring Services - SUV; 2500 km x 320 hours; Outstation 24*7
SUPPLY AND FITMENT OF POLYURETHANE
Set of C-Link along with NUT for EOT Crane Lifting Tackle of 65/ 10 Ton capacity.
1.WHEEL SHAFT 20 MM DIA. 2.TOGGLE CLAMP HTC-600FN 3.PROBE HOLDER CLAMP FOR GAUGE FACE 4.PROBE HOLDER CLAMP FOR NON GAUGE FACE 5.Carriage Shaft 6.NYLON BLOCK ASSEMBLY WITH LINEAR BEARING
One set of spares consisting of 11 items
Silicon Valve and Packing grease OKS 1110/6 or its equivalent in Stanvac as per parameters given. 1.PARAMETER: APPERENCE REQUIREMENT:WATER WHITE. 2.PARAMETER:TEMPERATURE RANGE REQUIREMENT: +40 DEG. C TO + 260 DEG. C. 3.PARAMETER:WORKED PENETRATION REQUIREMENT: 300 TO 320 0.1mm AT 25Deg.C 4.PARAMETER:DENSITY AT +27DEG. C REQUIREMENT:0.90-0.98 g/cc. 5.PARAMETER:WATER RESISTANCE TEST REQUIREMENT:0-90 DIN 51807. 6.PARAMETER:DROP POINT REQUIREMENT:> +250 DEG C. 7.PARAMETER: BASE REQUIREMENT:SILICON OIL,INORGANIC THICKENER. 8.PARAMETER:BASE OIL VISCOCITY AT+25DEG C REQUIREMENT:12500 CST.3. P as per Drg.No. 9. PARAMETER:PACKING REQUIREMENT: SEALED CONTAINER