Loading
Loading…
Loading…
17,065 results • Latest
Rear guard for RR20100 CG(M) compressor
CENTRE PIVOT PIN COMPLETE
Set of C-Link along with NUT for EOT Crane Lifting Tackle of 65/ 10 Ton capacity.
ALARM & PENALTY NOTICE 1x115x180
Safety Chain Complete
SET OF FILTERS FOR 3-PHASE LOCOMOTIVES AS PER CLW SPECIFICATION No. CLW/MS/3/012 ALT.6 OR LATEST.
COPPER CRIMPING SOCKET 90 DEGREE BEND AS PER attached DRG for 150 SQMM E-BEAM CABLE OF M16 STUD as per RCF SPEC NO. EDTS 200, REVNIL, COR - 2, TABLE-1, ITEM 1, WITH ICF ANX-01, UVAM Sub ITEM ID 2400038002.
Set of hardware items required for fixing Modular Toilets
Expandable insulation tubes 30/52
Industrial Grade Silicone sealant
SHUTTER ASSEMBLY FOR EFT SOCKET
MFT_SUR_(PH NO.:63014) PAPER PLASTER 3" X 5 MTRS (SET OF 4)
SAFETY STRAP FOR BOGIE BOLSTER SUSPENSION
Procurement of valves for track machine.
Terminal Board Assembly common for 25/4.5 kw 110V alternator conforming to RDSO Drg. No. RDSO/PE/SK/AC/0047-2003 (REV.4) subject to increasing the length of terminal bolt (slotted hexagon bolt) item No. 3 from M10*20L to M10*25L. However, the firms may quote for latest Specification/Drawing with amendment if any issued by RDSO/ICF/RCF.
Set of Pressure gauges as per CLW Specification No. CLW/TS/99/CF/3 Alt-5 consisting of 03 items as follows: 1) Gauge for BP 4 inches, CLW Drg. No. 1209-18- 306-225, Alt 1 - 2 Nos. 2) Gauge for BC1 & BC-2 4 inches, CLW Drg. No. 1209-18- 306-224 - 2 Nos. 3) Gauge for MR - FP 4 inches, CLW Drg. No. 1209-18-306-223 - 02 Nos.
TRACTION MOTOR CABLE CONNECTION
Two seat cutting Nozzle of size B-1/16 with swaged orifices for use with LPG cutting GAS to IS:7653-1975 (Reaffirmed-2019). Note: - Acceptable makes High Tech / ESAB / BOC / L&T / Kashmir / HMP shall only be considered & copy to be enclosed along with the offer.
ELGI Wiper Motor assembly complete, ICF type for MEMU as per M/s. ELGI TPL No. S 07023 which consists of: 1) Wiper Motor ICF 150mm spindle length p/no as per Elgi Drg No. 09021052 B 2) Wiper Arm and Blade assembly ICF type P/no. 090343570 3) Wiper Control Valve p/no. 090442770 - 1 No.
Clevis with handle to Ref. No. A & B as per as per RDSO specification No. RDSO/STR-56-BD-07 with Amend. No.2 of Sept.16 or latest and conforming to RDSO Drawing No.SKDL-2496, Alt-6 or latest.
DC Contactor Panel along with Brake application relay to ICF DRG. No. ICF/SK-7- 2-395 ALT 'D' OR Latest.
Earth return Carbon brush to BHEL Drg.no.34391328001V00.
Yearly Overhauling kit for SABWABCO Twin tower Air dryer Model AB 787-T-17-T25 and T-27 consisting of Three items as per attached annexure.
"Modified Sun visor assembly complete unit."
SAFETY LOOP COMPLETE FOR UNCOUPLING ROD IN ASSEMBLED CONDITION (ITEM 3 AND 4 DULY FITTED TO ITEM 1 & 2 ) to RDSO DRG NO:WD-03002 -S-01 ITEMS: 1 TO 4, ALT : 1.
OH KIT FOR EL-60 VALVE (APM DEVICE) CONSISTING OF 19 ITEMS CONFORMING TO RDSO SPECIFICATION NO.WD-23-BMBS-2008 (REV.1) WITH AMENDMENT-1 OF SEP-2016. (FULL DESCRIPTION AS PER ATTACHED DOCUMENT).
HEC TRANSMISSION CRT 5633 (For UTV Ashok Leyland engine) as per Phooltas Part no. UTVI 02 03/00 and AVTEC part no. 80001654/AASY1031006817 Make : Phooltas, AVTEC.
1) Blind Rivet for RFID Tags, as per Drawing; M/s Avlok Part No. HMS44-16419GG or M/s Stanley Part No. 02771-00824 or M/s Arconic Part No. MGLP-R8E or Equivalent. 2) RFID TAG AS PER GS1 STANDARDS AND AS PER THE CRIS SPECIFICATION NO.2016/CRIS/NDLS-ITPI/ WS-C/ POLICY/ RFID/ 0101/ PT-1 (V4,1) OR LATEST.
Monthly Basis Cab & Taxi Hiring Services - MUV; 2500 km x 320 hours; Outstation 24*7
Monthly Basis Cab & Taxi Hiring Services - MUV; 2500 km x 320 hours; Outstation 24*7
Integral Overcurrent Protection ISIMarked To IS12640 (Part2) (Q2)
Oxygen, Compressed Gas and Liquid (V3) Conforming to IS 309 (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No
PH:.(151303)FEMORAL ANGIOGRAPHY DRAPE, TROUGH WITH TROUGH, 208CM X 314.5CM, TWO 12.5CMS, ADHESIVE CIRCULAR FENESTRATION, ONE- 69CM X 350CM WINDOW, CONTROL PLUS FABRIC REINFORCEMENT,UNIT:NUMBER
Monthly Basis Cab & Taxi Hiring Services - SUV; 2000 km x 320 hours; Outstation 24*7
Guntakal Division- (i)Electrical Arrangements for the Proposed Interlocating of Mid- section Manned LC Gates (4 Nos) in Guntakal Division (LC-31 (KHT-RCG), LC -34 RCG-YPD), LC -42 (YPD-RU) & LC-76 (TAT-KBA).(ii)Guntakal Division-Electrical Arrangements for the Proposed Intrelocking of MID section Manned LC gates (3Nos) in Guntakal Division (LC-6 (VDD-NDZ) LC39 (YPD-RU) & LC-31 (MGB-KCM)
Paint White Synthetic Enamel Exterior finishing to IS: 8662/2004 or latest.
Supply and Application of Powder Coating
Crank Pin along with Pin and split pins as per RDSO Drg.No. Empty load device IR- ELD-10 WD84074-S-01-RC, Alt.3, Item Nos-6,7,8 &10. (Ref. Drg.Nos for Item No;s 6,7 is WD-84074-S-02 RC, Alt.1, Item Nos.10&8)
Jib cranes as per enclosed Technical Specifications
Supply, Installation and commission of Diesel Operated Tractor