Two seat cutting Nozzle of size B-1/16 with swaged orifices for use with LPG cutting GAS to IS:7653-1975 (Reaffirmed-2019). Note: - Acceptable makes High Tech / ESAB / BOC / L&T / Kashmir / HMP shall only be considered & copy to be enclosed along with the offer.

Special Eligibility Criteria

1. 1

   Purchase will be made from the OEMs [i.e. M/s High Tech , M/s ESAB , M/s BOC , M/s L&T, M/s Kashmir and M / s HMP] or their authorized dealer with Tender Specific Authorization only. Authorized dealers have to submit tender specific authorization with their offer, otherwise their offer will be summarily rejected.

   Document optionalConfirmation required
2. 2

   Offers received without make/brands or with vague mentions like "0", NIL, "as per tender" etc will be rejected. Participating firms should mention their offered Make/Brand against tendered item in the corresponding Make/Brand column without fail. Ambiguity in the form of offering multiple Make/Brand, not mentioning Make/Brand will be treated as disadvantage to the bidder and its offer may be liable to be rejected.

Check List

1. 1

   Please go through Tender eligibility criteria before submission of offer.
2. 2

   Please go through Instructions to tenderers and General tender conditions of Tender before submission of offer. Having participated in the tender, it will be considered that you have gone through all the conditions and the same are accepted by you.
3. 3

   Please check that the offered description is exactly as per tendered description.
4. 4

   Have you ensured that while quoting the rates, you have clearly indicated the rate of applicable duties and taxes included in the prices quoted by you. Any variation in tax structure/rate due to introduction of GST, shall be dealt with under statutory Variation Clause.
5. 5

   Please check whether you have enclosed relevant document for MSEs to get benefit/preference under public procurement policy.

Commercial-Compliance

1. 1

   [a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST /UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item. [d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number.[e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. [f] Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher taxbill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC

   Document optionalConfirmation required
2. 2

   Firm agrees to pass on such additional set off / input tax credit as may become available in future under the GST provisions in respect of all the inputs used in the manufacture of the tendered item on the date of supply, by way of reduction in price and advise the purchaser accordingly

   Document optionalConfirmation required
3. 3

   In case of road delivery, the date of delivery at destination [consignee's end] shall only be treated delivery date irrespective of FOR/F.O.T condition mentioned elsewhere in the contract/tender

   Confirmation required
4. 4

   The bidders should quote the applicable HSN codes and it is the responsibility of the tenderer to quote the correct HSN code and upload the document

   Document optionalConfirmation required
5. 5

   Firm willing to avail benefits of Micro and Small Enterprises, must submit documentary evidence of being Micro or Small Enterprises for tendered item in the certificate issued by nodal agencies as per Public Procurement Policy (i.e., UDYAM REGISTRATION CERTIFICATE), failing which firms offers will be treated as Non-MSE firm. For detailed instructions refer Para 15 of General Tender Conditions attached with NIT and/or available as Public Document on IREPS website Goods and Services/SCR. Failing which such benefit will not be extended to them.

   Document optionalConfirmation required
6. 6

   Offer should be kept valid for 90 days.
7. 7

   Price Variation Clause is not applicable for this tender
8. 8

   Force majeure clause is applicable.
9. 9

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted. Validity will be reckoned from the closing date of tender

2. 2

   Firms are expected to quote for a quantity not less than 50% of the tendered quantity. Offers received for quantity less than 50% of tendered quantity will be considered unresponsive and will be summarily rejected.