South Coast Railway Tenders

Supply, installation and commissioning of Automatic SCADA based Rake Test Rig (RTR) for all wagons types, both single/twin pipe system along with test bench

Supply and fitment of "Winodw curtain rods Material - SS 304 steel of 20 gauge thickness. Dimensions: length 152 mm length with 25 mm outer dia having minimum 20 kg load bearing capacity with two finials connected at either end of rod. 2 brackets overall dimensions length: 102 mm, height: 56 mm for fixing to wall. thickness of material : 20 gauge 2 finials over all dimensions: length: 102 mm and dia : 62 mm with 20 gauge thickness material, suitable screws and fishers."

1.Supply of "LAN Component - 24 port Patch panel 2.supply of "LAN Component - Patch Cable 3.Supply of "LAN Component - CAT6 Cable (each box - 305 meters) 4.Supply of "LAN Component - Keystone + Box 5.Supply of "LAN Component - 24 port Network switch

Manufacturing and supply of Galvanized Plate Screw .

Fish bolts & nuts for 60kg rail.

FISH PLATES FOR 60 KG.

10 KVA, 25 KV/240 Volt oil filled outdoor.

25 KVA, 25KV/240V single phase, oil filled auxiliary transformer.

1)12V, 180AH HEAVY DUTY LEAD ACID BATTERY 2)12 Volts 100 AH Heavy Duty Lead Acid Battery

1)Supply of Aluminium Wall Extension Ladder Manufactured from Aluminium, Size: 20ft closed - 35ft Extended. 2) Supply of Aluminium Wall Extension Ladder Manufactured from Aluminium,Size : 24ft closed - 43ft Extended.

Metal Cots along with Mosquito Net Frames.

[1] S&T portion of work in connection with Provision of 06 m wide FOBs at VBL & PVP stations under Amrit bharath scheme.[2] S&T portion of work in connection with Extension of Existing platforms to accommodate full length of coaching train at SNM station on RV line of WAT Divn. [3] S&T portion of work in connection with Raising of High level platforms 02,03&4 and 05 platforms at ALM and KPL stations over Main line. [4] Name of the work: S&T portion of work in connection with Provision of CCTV Cameras parcel scanners and battery operated trolleys at parcel offices over Waltair Division.Locations: (1) VSKP (2) VZM (3) CHE (4) VBL (5) PVP.

Set of fasteners consisting of (1)Hexagonal Head Bolt Of Length 40mm, Dia-8mm, Pitch - 1.25mm, Half Threaded, Along With Suitable Nut, One Flat Washer & 2 Spring Washer, Grade 10.9, Qty-1000 Nos. (2) Hexagonal Head Bolt Of Length 40mm, Dia-8mm, Pitch - 1.25mm, Full Threaded Along With Suitable Nut, One Flat Washer & 2 Spring Washer, Grade 10.9, Qty-1000 Nos. (3) Hexagonal Head Bolt Of Length - 25 Mm, Dia8mm, Pitch - 1.25mm, Along With One Flat Washer & 1 Spring Washer, Grade 10.9, Qty-1000 Nos. (4) Hexagonal Head Bolt Of Length 40 Mm, Dia 6 Mm, Pitch - 1.0 Mm, Half Threaded, Grade 10.9 With 02 Spring Washer & 01 Flat Washer, Qty-1000 Nos.

Metal Cots along with Mosquito Net Frames.

Metal Cots along with Mosquito Net.

Horizontal Lever for BOBRN Wagon to RDSO Drg NO WD-89007-S-71, Alt 6,Item No. 1(Including corresponding nylon bushes to RDSO Drg.No.WD-91071-S-69, ALT-11 in assembled condition) Material for Horizontal lever : IS:2062 E250A with Cu and for bushes: Nylon-66.

Supply and installation of Circuit Breaker and its accessories enclosed in junction box.

Set of Certified reference materials (CRM) for Optical Emission Spectrometer (OES) consists of 4 items as per the Technical Specification (Copy Enclosed ).

GNT Division: Provision of additional Loop line with Junction type crossover facility and conversion of existing looop line as longer loop line at Potlapadu station in GNT-NDL section -25kv OHE arrangements

GNT Division: Provision of ROB at Syamala Nagar/GNT at existing LC No. 312, KM 3/11-13 between GNT-NLPD -25KV OHE modification arrangements.

SET OF O-RINGS .SET CONSISTS OF 1. 1/2 inch Female QRC O- Ring, Material-NBR, SIZE : OD-16 mm, ID-12 mm, Thickness-2 mm, QTY-150 Nos 2. 1/2 inch Female QRC Flat Washer, Material-NBR, SIZE : OD-20 mm, ID-10 mm, Thickness-3 mm, QTY- 150 Nos 3 .1/2 inch Feed Coupler Flat Washer ,Material-NBR, SIZE : OD-22 mm, ID-9 mm, Thickness-3 mm, QTY- 150 Nos 4. Kirloskar compressor 500 CFM Diaphragm. Material -Neoprene ,Maximum Pressure -12 kg/cm2, SIZE : Bottom OD-50 mm ,Bottom ID-48 mm, Bottom OD Including outer flange - 60 mm, Bottom flange Thickness-3 mm, Top ID-43 mm ,Top OD-45 mm, QTY-30 Nos 5. Compressor 540 cfm HP O-Rings .Material-Silicon Rubber, SIZE : 95 X 5.5 mm O Ring, QTY-200 Nos 6. Reciprocating Compressor 540 cfm LP O-Rings. Material-Silicon Rubber, SIZE : 105 X 5.5 mm O Ring, QTY-100 Nos 7. Reciprocating compressor Decompression O-Rings. Material-Silicon Rubber, SIZE : 29.5 x 3 mm O Ring, QTY-100 Nos 8. PU Pipe. Material-Polyurethane, SIZE : 12 x 8 mm, QTY-30 Mtrs.

Hand Wheel spindle for BOXNHL BMBS Wagon As per Drg.no. WD-09034-S-10, Item no. 2. Alt-11 . As per Drawing, M-27 Nut & STD. Washer should be along with spindle.

Isolator assembly as per M/s. FTRTIPL.

Auxiliary contactor pantograph and VCB (Pos no 130.1,136.4) CLW spec No CLW/ES/3/0040 Alt- C or latest alteration up to date of tender opening.

Set of 3 items.

"Set of spares (Insulating Rod Assembly) for Brush holder and +ve and -ve support for Traction Motor type HS 15250 A. Each set consisting of 4 types of items as per as attached document."

Full gloss polyurethene PU Paint Grass Green shade

Brake gear pin dia 32x240mm as per Drg.No.RYPS/SCR/C&W/SK-267 with Material IS:1875, CL-V.

9.52 mm dia Lock bolt with collar with required grip range 6.35 - 12.70 mm and Confirming to Specification IS/RDSO-WD/0001:2022 or latest.

SW 1:NELLORE-vedayyapalem-Provision of IRS type shelter on eeach platform(ii)improvements to circulating ares BT surface in SSE/W/NLR section in ADEN/NLR subdivision.SW 2:Provision and Extension of COP on PF 4&5,2&3 and PF1 at KVZ station in SSE/W/KVZ section under ADEN/OGL sub division

Ultrasonic testing of Wagon axies.

Bearing No. MRJ 11/8

High voltage rating HRC

Spring Lock Washer

K05 Timer relay valve

BUSH FOR CALIPER HANGER

Professional Circular Saw blade

Stabilizer Assembly Bearing Housing

UNLOADER VALVE to KBI Part no: II97710

Hex. Head Bolt, Castle Nut with washer and split pin (each one No.) As per Ref. No.1 to 4 of ELS/LGD Drg.No. C/ELS/LGD/Bogie/3/131, Alt-1. (As per UVAM ID:2101159).

12.5 MFD +/- 6% micro farads 660 V AC Capacitors. Note: One sample should be got approved before effecting bulk supply.

Drivers direct brake valve (SA-9) for E70 Brake system to FTRTIPL part no.004001000.

Set of items for LAXVEN MAKE pulse generator:(i)Indicator Mother Board to Laxven Part No: 2000E2-SA-1002-1, Qty-02 Nos. (ii)Main Card to Laxven Part No: 2000E2-SA-1001-2, Qty-05 Nos.

Aluminium Conductor Welding Cable (HOFR Covering) cable.

AOH replacement kit (4300007100/30) for single bottle VCB of M/s. AAL type VCBA -25.10 Tr.1Kit of Filter catridge Part No.SG-300140-R 0001--1 Set.1.1 Filter element (40 ?m) - Pt. No.4300014000 -1 No.1.2'O' ring -Part No.69.211.215--1 No.2 Ring type joint. Part No.HSBA 432577P0001 -1 No. 3 Kit for side cover LHS & RHS.Part No.4300007100/23-1 Set. 3.1 'O' ring - Part No.4306057477--2 Nos. 3.2 Anti breaking screw M6 x 20Part No.SG300120 P0001--8 Nos. 3.3 Elastic washer M6Part No.9AVA 330-11--8 Nos. 4 Packing Ring Part No.SG300073P0002---1 No. 5 'O' ring for fixing pressure regulator assembly to reservoir. as per Drg.No. Part No.HSBA432095 P0026--1 No.

Single pack MS sealant

PILLAR GLASS (SMALL)

Supply, installation and commissioning of Synergic Pulse MIG Welding Machine.

Sealing muff

(i)Power Supply Card to Laxven Part No :2000E2 -SA - 1001-3. for LAXVEN pulse generator