South Eastern Railway Tenders

Overhauling kit for Feed valve

DRAIN VALVE FOR WATER SEPARATOR

Supply and Commissioning of Digital Outside Micrometer

Supply and Commissioning of Digital Vernier Calliper

Commissioning of Digital Wheel

Self Aligned Ball Bearing SKF 1203 or similar for Tap Changer.

ASD Display Card, Timer Relay & DR-UPS 40.

Construction of 50 Bedded (25 Nos of Rooms) New Running Room at Barsuan (BXF)

Bimetallic strips

Hiring of Petrolmen for 02 years under the jurisdiction of DEN/CENTRAL/CKP

Robotic AC Duct Cleaning and Sterilization by Ozone in AC Coaches at Kharagpur Workshop.

Rectification/Straightening of leaning OHE mast/structure under KGP Division.

LTC Current Transducer

Supply of Infrared K-Type Thermometer,

9 TONNE ADJUSTER (EYE AND CLEVIS TYPE) with complete set including fasteners etc.

Nails wire M.S. countersunk head, Size: 1.80 x 25 mm etc.

Rail Cutting Wheel (Abrasive Disc)

Snap Lock and Hinge

Workstation computer

wall bracket fan 400mm sweep

Compressed oxygen gas for industrial use to IS: 309/1992 [IV Rev] with ADMT No. 1

Metal cutting gas [LPG] in refill cylinder for metal cutting activities of locomotives. Each cylinder contains 19 kgs, Make: BPCL/IOCL or similar

Set of Cable Lugs,details as per annexure to CLW's Spec.No.-CLW/ES/3/0130(Alt.- O) for WAG-9 Locos.

Set of spares for precision induction heater. (1) SPARES FOR PRECISION INDUCTION HEATER: FLEXIBLE INDUCTION FOR ANY TYPE JOB 19mm X 15 M WITH BOTH SIDE CONNECTOR OF PRECISION ,MAKE- INDUCTION HEATER, MODEL- PIHR30 PART NO- JGM/PIA/PIHR/FI30/01, Suitable for MAKE-PRECISION INSTRUMENTS & ALLIED Qty: 01 Set. (2) SPARES FOR PRECISION INDUCTION HEATER: MAGNETIC TEMPERATURE PROBE Influx Coil PART NO-JGM/PIA/PIHR/MTP02/30, Suitable for MAKE-PRECISION INSTRUMENTS & ALLIED Qty: 02 Nos.

Supply & transportation of DC-DC Converter etc.

Low Voltage Fuse (with holder) for local main supply current rating 80A etc.,

Set of Digital Wheel Wear Gauges for Electric Locomotives consisting of three items

Crimping Plier: Optimum transmission of force because of toggle lever for fatigue- reduced operation.

ALUMINIUM ALLOY STUD (750 SA) USED FOR CONNECTING BASIC INSULATING PLUG AND ROOF MAIN BUSHING OF WAG-9/ WAP-7 LOCO.

Compact rechargeable LED fitting for working in SR, HB, SB during inspection of WAG-9 Locomotives.

Side Sill of LHB coaches.

Manual crimping tools for insulated terminal and lugs double crimping size 0.5 mm square to 6 mm square .

Insulated spacer for temperature sensor assembly with hex head bolt M6X40, grade: 8.8 to IS: 1367. Each set consists of 2 items in 05 nos.

3/4 inch SQ. DRIVE CORDLESS IMPACT WRENCH HAVING BRUSHLESS MOTOR AND IQ POWER CONTROL SYSTEM WITH 4 MODES

Hiring of four (04) nos. of Non-AC road vehicles (Tata Sumo/Bolero/Scorpio or similar) for transportation of Crew and Train Manager with their belongings from BNDM(02 vehicles) and ROU(02 vehicles) lobby to any station and back when and where required round the clock for two years.

Modified Plate Flange Traction Motor Inlet for 3 Phase Traction Motor type 6FRA6058, as per CLWs Drg. No.- 1209-01.418-026 (Alt.-1) for Traction Motor Leather Bellow.

Check Valve 3/4'' (Aux. NRV)

IOH kit of Knorr Bremse make Air Dryer consisting of 57 items in 123 Nos.

Radial Fan for FDU for WAG-9 loco to type no. RL 90-18/12N 12 Volt DC 460mA, 6.3Watts.

29320124-Clevis With Handle For Tight Lock etc.

ANALOG BOARD/CARD

GEAR WHEEL 65 TEETH FOR WAG7 LOCOS TO RDSO'S DRG NO.SKDL-4372 (ALT-4) & SPEC NO.MP-0-2800-09,REV.2 OF JUNE 2005.

AOH KIT FOR BRAKE RIGGING ITEMS OF WAG7 LOCOS CONSISTING OF:- (1)FLAT SPLIT COTTER TO IS:2638,SIZE- M5 X 12 X 65 MM = 6 N0S. (2) SPLIT PIN TO IS: 549 (a)SIZE- M5 X 90 MM =3 NOS. (b)SIZE- M6 X 50 MM =1NO. (3) FLAT WASHER TO IS:2016 (A)SIZE- I/D-28 MM, O/D-45 MM, TH-5 MM =3 NOS. (B)SIZE- I/D-35 MM, O/D-55 MM,TH-3 MM =3 NOS. (C)SIZE-I/D-60 MM, O/D-100 MM, TH-5 MM =1 NO. (D)SIZE- I/D-40 MM ,O/D-65 MM, TH-3 MM =3 NOS.

SILICA GEL, CONFORMING TO IS: 3401/1992, TYPE INDICATING (BLUE TO PINK), GRAIN SIZE 6mm TO 8 mm. Bulk density (max)-600 gm/ltr. and packing should be done in 25 kg/bag. Packed in double HDPE bag with inner poly liner(it should be moisture proof)

Grease for Traction Motor Roller Suspension Bearing. Specification: Approved Lubricants for HHP(EMD) Locomotives, S. No. 6, of RDSO'S Maintenance Instruction No MP.MI-15, Revision-13, May-2023, EXXON MOBIL

RFID TAG.

8 pin plug in power relay features etc

Coupler Rod for BVCM Wagon.

Oil Hydraulic. IS: 10522/1983, Gr. VG - 68.

Capacitor 25 MFD (C) 560V (RMS) suitable for RC Damping panel of Vacuum Circuit Breaker of makes Genteq/USA or ICAR/Italy or Zeonics Systech/Bangalore or Equivalent as per CLW Spec No.CLW/ES/C-47 Alt-I or latest.