Loading
Loading…
Loading…
3 results • Recent activity
Line Intractive UPS with AVR Line Intractive UPS With AVR ( 24 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 1.0/800 1.0/800 Technology MOSFET-PWM MOSFET-PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single phase sinewave 230v AC, 50Hz Single phase sinewave 230v AC, 50Hz, Single Phase Quasi-Sin-wave 230 V AC, 50 Hz Degree of protection IP-21 IP-21, IP 20 Inverter Efficiency (%) >/= 70% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year - Warranty for Line Interactive UPS 1 Year 1 Year, 2 Years, 5 Years Installation and commissioning instructions No - CONSTRUCTIONAL Type of enclosure Mild steel - AC out put for printer (not through Yes Yes, No 1/4 inverter) Inverter out put socket AC out put for printer (not through inverter) 3 Three pin 2 Three pin, 3 Three pin, Hard wiring, Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - Dry heat Test at 45 degree for 16 Hrs as Yes - 2/4 per IS:9000 pt-3/sec-5 Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date ETDC& 28MH&M/S 14/12/2016 - Name Of Lab ETDC& 28MH&M/S 14, NCR, DELIHI - Address of Lab EETDC& 28MH&M/S 14, DELIHI, INDIA - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahaveer Saini N 110003, Tariff Commission, 7th floor, Lok Nayak bhawan, New Delhi 24 15 EMD Required No ePBG Required No
twill weave cotton fabrics cloth cotton drill Twill Weave Cotton Fabrics Cloth Cotton Drill ( 125 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification Conforming to BIS specification No IS: 177-1989 Latest - Variety No as per IS Variety No 3, preshrunk Variety No 3, preshrunk, Variety No 4 ( mercerised and preshrunk ) CERTIFICATION ISI. Marked false CML No ( if ISI marked ) NA - CONSTRUCTION Mass (g/m²) 308 ( Variety No 4, dyed with other than MK Base ) 245 (variety No 3, Bleached ), 270 (variety No 3, dyed with MK Base ), 255 ( Variety No 3, dyed with other than MK Base ), 300 (variety No 4, 325 ( Variety No 4, Dyed with MK Base, 308 ( Variety No 4, dyed with other than MK Base ) Ends per cm 38 (for variety No 3 ) 38 (for variety No 3 ), 43 ( for variety No 4 ) Picks per cm 19 - Weave 3 up 1 down warp faced Twill - 1/3 COLOUR Colour white (bleached) white (bleached), mineral khaki, vat olive green on M.K.base, any vat dyed shade other than M.K./O.G. on M.K. Base DIMENSIONS Width of Cloth 150 142.0, 150.0 Length of Than ( min ) 36 - Short length pieces of minimum 10 mtrs and above will be acceptable to the extent of 5% . Yes - OTHER REQUIREMENTS Manufacturers Name/Trade Mark shall be woven on both selvedges throughout the length using suitable yarn. The same shall be clearly visible even after wetprocessing finishing. The yarn used for weaving manufacturers name shall be of suitable colour which shall not migrate to the body of cloth. yes - Shrinkage or Elongation Percent, Max (Warpway and Weftway ) 3.0 (V. No 3, preshrunk quality ) 3.0 (V. No 3, preshrunk quality ), 1.0 ( Variety No 4 ) TEST REPORT Test report to be furnished to the buyer on demand yes - Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. Yes - Name and address of the Lab AS PER REQUIREMENT - Test Report No. AS PER REQUIREMENT - Test Report Date AS PER REQUIREMENT - * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Mahaveer Saini N 110003, Tariff Commission, 7th floor, Lok Nayak bhawan, New Delhi 125 15 EMD Required No ePBG Required No
movable file storage system Movable File Storage System ( 16 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Number of Bays 2-Bay 2-Bay Type of Drive Mechnized Drive Type Push Pull Type, Mechnized Drive Type, Sprocket Chain Drive Mechanism Number of Single Faced Fixed/Static Bodies 1 - Number of Single Faced Movable Bodies 1 - Number of Movable Bodies (= A) 1 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 0 Number of Shelves in Each Section Cabinet 4 Shelves/5 Compartments 5 Shelves/6 Compartments, 4 Shelves/5 Compartments, 3 Shelves/4 Compartments, 2 Shelves/3 Compartments Load Carring Capacity of Each Shelf (Kg) 80 Kg 60 kg, 70 Kg, 80 Kg Delivery Condition of Movable File Storage System Knock down - 1/6 Free Assembly and Installation Commissioning of knocked down supply YES - Shelves in the cabinets Fixed, adjustable - Every Base frame fitted with Two pair of MS wheel - Guide rail provided with Stopper - Indexing arrangement 2 MM thick clear transparent acrylic sheet and having other dimension of 155MM/106MM - Anti rust treatment YES - Stud Main and add on construction - MATERIAL M S Sheet Thickness of the Cabinet Body (mm) 0.8 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest 0.8 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest, 1.0 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest, 0.8 mm Continuously pre- painted galvanised steel sheets with protective film 40-45 Micron as per IS 14146, 1.0 mm Continuously pre- painted galvanised steel sheets with protective film 40-45 Micron as per IS 14146, 2.0 mm Continuously pre- painted galvanised steel sheets with protective film 40-45 Micron as per IS 14146, 2.0 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest M S Sheet Thickness of the Shelf Pannels (mm) 0.8 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest 1.0 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest, 0.8 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest, 0.8 mm Continuously pre- painted galvanised 2/6 steel sheets with protective film 40-45 Micron as per IS 14146, 1.25 mm Continuously pre- painted galvanised steel sheets with protective film 40-45 Micron as per IS 14146, 1.25 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest M S Sheet Thickness of the Door Pannels (mm) N.A 0.8 mm Continuously pre-painted galvanised steel sheets with protective film 40-45 Micron as per IS 14146, 2.0 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest, N.A Height of base frame ±2(mm) 100mm - Height of track and moving clearance ±2(mm) 45 mm - Material of Stud PVC stud between bodies - 3/6 Material of base frame Hot Rolled Sheet 2MM thick confmg. to IS:1079/Latesst - Material of guide rail Consists of J-Section 2MM thick H R Sheet and 25MM thick square bright bar both connected by screws - Material of 'C' Channel H R Sheet 2MM thick confmg. to IS:1079/Latest - Drive cover material 1MM thick CRCA confmg. to IS:513/Latest and box type construction - Number of Folds in Shelf Panels 10 - DIMENSION Overall Height of the Cabinet from the ground in mm ±10 (mm) 2080 1725, 2080, 2200, 2350, 2600, 2750, 2900, 2950, 2130, 1875 Depth of the Cabinet ±10(mm) 375 315, 375, 450, 457, 560, 6 10 Width of the Cabinet in mm (± 5 mm) 915 905, 915, 1050, 1180, 15 00 Minimum Excess Rail Length in addition to Filing Cabinet Covering ( For Aisle working) (mm) 1200 - Pitch of all the shelves 25.4MM - Aisle space inside of units 915 mm - COLOUR & FINISH Paint Powder Coating - Colour of Paint Ash Gray, Steel Gray, Dark Gray, Olive Green, Brown, Dark Brown, White, Off White, Blue, AS PER BUYER CHOICE - WARRANTY Warranty Period IN NUMBER OF YEARS 1 1, 5 DOORS AND LOCKING Seperate Door Provided with each Section Cabinet NO - Central Locking System for locking entire compactor unit YES YES, NO 4/6 Safety Lock for each Movable Body yes - Seperate door lock for each section NA - Fitting of stopper In ground by grouting bolt - Handle High Quality polyurathene(PU) with three attractive arms - CERTIFICATION Test reports to be furnished to buyer on demand YES - BIFMA certification NO - OEM of offered product is ISO 9001:2015 certified YES - OEM of offered product is ISO 14001:2015 certified YES - OEM of offered product is ISO 18001:2007 certified YES - Green guard certification NO - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mahaveer Saini N 110003, Tariff Commission, 7th floor, Lok Nayak bhawan, New Delhi 16 15 EMD Required No ePBG Required No