Loading
Loading…
Loading…
47 results • Latest
Spacer (For Electrical Cable) to EMD Par [Spacer (For Electrical Cable) to EMD Part No. 8451802 and BLW PL. No. 18460057 for HHP locomotives.]
Set of 03 Items consisting of three item [Set of 03 Items consisting of three items as per details below: Bolt hex head of size 5/8"x11x3-3/4" to EMD Pt No.271569 & DLW Pt No.19016165, Qty/set-1 No, 2.Nut hex lock-nylock 5/8"x11- Nylon to EMD Pt. No. 8032747 & DLW Pt No.19350326,Qty/set- 1 No, 3. Washer Special Damper to EMD Pt No.9532904 & DLW Pt No.19394366, Qty/set-1 No ]
Set of items for lube oil line to cam sh [Set of items for lube oil line to cam shaft bearing as detailed: 1.BOLT. Hex head X INCH-28 TPI x 5/8 INCH-Oll line to rocker arm shaft to EMD PLNG 181311 and BLW PL.No.19010059, Qty/Set-32 Nos. 2. BOLT- Hex head 1/4 INCH - 20 TPI x 3/4 INCH, Oill line to Camshaft Bearing to EMD PLNG 179795 and BLW PL.No.19010011, Qty/set-32 Nos. 3.WASHER 1/4 spring lock washer to EMD PL.No.103319 and BLW PL.No. 19390014, Qty/Set-64 Nos. Material Test Certificate (MTC) required & traceable on NABL, at the time of material supply. ]
Set of item consist of: 1. 2 SN EN 853, [Set of item consist of: 1. 2 SN EN 853, 4785 PSI, 3/8" dia (9.5 mm) High pressure hydraulic hose reinforced with two layers of high tensile steel wire braid in compliance to DIN EN 853 2SN & SAE 100R2AT Spec. 50m. In length. Qty/set-1 nos. 2. 3/8" Male/Female BSPT or NPT water jet nozzles, material: Brass, Operating Pressure: from 4000-5000 PSI, flow Rate: 1 to 100 LPM, Spray Pattern: Full cone/hollow cone, Qty/set-1 nos ]
Coil magnet 1033 (+/-) 5% ohms for 4 poi [Coil magnet 1033 (+/-) 5% ohms for 4 point general purpose relay to EMD part no.9516672. Note: Sample to be approved before bulk supply]
Servo Mesh SP 68. MAKE-SERVOMESH SP-68 O [Servo Mesh SP 68. MAKE- SERVOMESH SP-68 OF IOCL, MAK AMOCAN-68 OF BPCL,PARTHAN EP-68 OF HPCL OR ITS EQUIVALENT]
Digital refractometer for ethylene glycol confirming to RDSO specification - RDSO/2018/ELS/SMI/0325, latest version as per Annexure. Annexure enclosed.
Fully insulated open head electrode hold [Fully insulated open head electrode holder, 600 Amps. Detail technical specification as: (a) suitable for 95 mm core dia. Aluminium cable (b) Holder should have embossed/ Cast, Identification mark of manufacturer of holder. Make: ESAB/ JACKSON/LINCOLN or similar. Special Eligibility Criteria - Only OEM or their Authorized Dealer/Distributor should quote along with "Tender Specific Authorization" from OEM at the time of Tendering, otherwise offer will be ignore. ]
Supply, installation and commissioning [Supply, installation and commissioning for set of spare parts in 200 KVA oil cooled stabiliser, consist of following material: 1. 3 phase, micro controller PCB, Qty/set- 01 no, 2. 3 phase motor driver PCB, Qty/set- 01 no, 3. R - C network, Qty/set- 03 nos, 4. Servo motor AC ,10 kg/cm2, Qty/set- 01 no. ]
Digital Tachohour meter (Model TH-118) R [Digital Tachohour meter (Model TH-118) RPM cum hours meter Cummins part no.2879766. Material to be procure from OEM or OEM authorized vendor. Note : Sample to approved before bulk supply ]