Asphalt & Road Surfacing Tender Results

Providing and applying primer coat with SS1 grade bitumen VG-10 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means. (MORTH 502)

Government eProcurement System Created By: Savio Reis Gomes Created Date/Time: 02-Mar-2026 12:40 PM Tender Title: Resurfacing of internal roads in Agalli, Murida and Don Bosco College in Fatorda Constituency. Tender ID: 2026_PWD_27792_1

M & L for Premix Bituminous concrete 30mm consolidated thickness with 5.5% binder (paving bitumen of grade VG-30) content by weight of total mix and crushed aggregates of grading 2 with mixing of aggregates and VG-30 bitumen by using electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from Hot mix plant to work site by tippers and laying with Mannual mechanical paver finisher and as per approved mix and rolled & compacted to required camber and gradient with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MoRTH (5th Rev) specification and as specified and directed. Notes:- (i) The contractor shall quote the rate against item considering minimum 5.5% VG-30 bitumen content. Job Mix Formula as per Clause No. 505.3.3 of MoRTH (5th Rev) for BC shall be worked out from Govt approved lab / Govt Engineering Collage / CTL for obtaining Optimum Binder Content (OBC) by the Contractor without any financial effect to the Dept and same be submitted to the accepting officer for approval. Any variation in binder content on minus side shall be adjusted @ Rs 50/- per kg of binder and no adjustment shall be made on plus side. (ii) Cost of filler i.e. cement/Stone dust is deemed to be included in quoted unit rate. (iii) After spreading of mix as per clause 507.4.7 entire surface during the operation shall be rolled with road roller 8-10 tonne (smooth wheeled) followed by tandem road roller of 8-10 tonne static weight, followed by finished rolling with 6 to 8 tonne smooth wheel tandem roller as per Clause Nos. 507.4.8 and cost of the same is deemed to be included in quoted unit rate. (iv) Contractor shall intimate the planned date of incorporation of mix in advance to GE. Premix will be approved in writing by Rep of Accepting Officer at plant site before incorporation of the same in the work.

Preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. Black top surfaces

Helipad, Murrom/Bitumenous Road and Barricading for VIP Programme under PWD Sub Division Guna (I Call)