Asphalt & Road Surfacing Tender Results

Prime Coat Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade (SS-1) conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).

Open-Graded Premix Surfacing using Bituminous (Viscosity grade Paving Bitumen / Modified bitumen) Binder and Mobile Hot Mix Plant (Light Duty) Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of Type B as per Technical Specification Clause 508 for Rural Roads of MORD.

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. (DSR-18/16.1)

Preparing of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and scoring the surface with diagonal lines V shaped 25mm deep and 2 meters apart and removal of rubbish to a distance not exc 50m and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.

eProcurement System Government of Jammu And Kashmir Created By: Ranjit Singh Created Date/Time: 27-Dec-2025 02:32 PM Tender Title: Restoration of Govindpura Kundi Road by way of Resurfacing Madadamizationunder Potholes Programme 2025-26. (3rd Call) Tender ID: 2025_PWDJK_298346_11