Asphalt & Road Surfacing Tender Results

eProcurement System of Government of West Bengal Created By: SUBHAS PAUL Created Date/Time: 16-Feb-2026 05:52 PM Tender Title: Eklakhi Rashikpur Road MDR from 0.00 Km to 4.00 Km, Urgent Potholes repairing and Patch Surfacing work in different Stretches under Malda Highway Division in the district of Malda. Tender ID: 2026_SH_996112_2

Tack Coat Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS:8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including costand carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).

SURFACING WORKS BETWEEN KM 8.00 TO 15.00 FOR SURFACING WORKS ON ROAD DONG-JACHEP

Providing and fixing of road stud 100x100 mm, diecast in aluminium, resistant to corrosive effect of salt and grit, fitted with lens reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm up to depth of 60 mm as per clause 804 of MORT&H specification all as specified.

eProcurement System of Government of West Bengal Created By: ARUP KUMAR ROY Created Date/Time: 26-Dec-2025 05:03 PM Tender Title: WBPW(ROADS)/Sr. SE/ NHC /NIT-01 /2025-2026/01 Tender ID: 2025_SH_935562_1

M&L for providing, laying, spreading 30mm thick (consolidated thickness) of premix Semi Dense Asphaltic Concrete (SDAC) with crushed and graded coarse aggregates as per design based on Job mix formula with 5.0% bitumen binder content (bitumen of Grade VG-30) by weight of total mix including heating bitumen to the required temperature, mixing bituminous concrete in automatic and temperature controlled drum type hot mixing plant, laying, spreading uniformly of Mechanical paver and rolling and consolidating to the required gradient and camber with 8 to 12 tonne power road roller and Vibromax roller to a uniform smooth surfaces complete all as specified and as directed. Notes : (i) The work shall be executed as per design mix approved by GE. (ii) Paving bitumen of Grade VG-30 for semi dense asphaltic concrete shall be used and shall be procured by the contractor under his own arrangement and at his own cost. (iii) Cost of all the materials, T&P, labour etc. required for preparation of surfaces, applying tack coat, providing and laying semi dense asphaltic concrete including procurement of bitumen as specified here-in-before, stone aggregates & sand etc., rolling and all other elements required for entire completion of the job shall be deemed to be included in the unit rate quoted for this item. (iv) Bituminous concrete shall be mixed in drum type hot mix plant, transported from plant to work at site and laid/spread by means of mechanical paver finisher. (v) Filler for bitumen concrete shall be OPC grade @ 2% of total mix. (vi) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any minus variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted as per invoice per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in this item.