Borewell & Tubewell Works Tenders

PART C Unlowering of submersible pump set along with lowering pipes with depth up to 120 mtr and submersible cable with safety from tube well, checking the pump set, transportation of pump set from tube well site to store as direction, receiving repaired / new pump set from store/ divisional store , testing the same, transportation to site and lowering back into tube well along with submersible cable, lowering pipes, specials etc and commissioning of the tube well. The job also includes cable jointing, checking of discharge of pump set, interconnection of lowering pipe from nearby distribution pipe line, checking of starter and reporting for completion of Job or fault/problem if any. (Upto 20 Km distance run by lowering machine)For three Phase pump set G.I. Double Flanged Pipe Lowering Assembly of nominal dia 50 mm

PART C Unlowering of submersible pump set along with lowering pipes with depth up to 120 mtr and submersible cable with safety from tube well, checking the pump set, transportation of pump set from tube well site to store as direction, receiving repaired / new pump set from store/ divisional store , testing the same, transportation to site and lowering back into tube well along with submersible cable, lowering pipes, specials etc and commissioning of the tube well. The job also includes cable jointing, checking of discharge of pump set, interconnection of lowering pipe from nearby distribution pipe line, checking of starter and reporting for completion of Job or fault/problem if any. (Upto 20 Km distance run by lowering machine)For three Phase pump set G.I. Double Flanged Pipe Lowering Assembly of nominal dia 50 mm

Repair of Horizontal Centrifugal pumping sets for water works, boosting station and tube wells consisting mainly of motor, pump, electrical control panel, starter, cable, wires of all type, capacitors, volt meters ampere meters, main switches, Kit Kats, change over, lighting arrangement etc. Including all electric installation complete and all accessories i.e. sluice valves, non return valves etc. pertaining to pumping machinery inside the premises of water works, Boosting station and tube wells and all other works contingent. for 01 year. Centrifugal Above 20 BHP

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of useable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.