Borewell & Tubewell Works Tenders

Unlowering of submersible pump set along with lowering pipes with depth up to 120 mtr and submersible cable with safety from tube well, checking the pump set, transportation of pump set from tube well site to store as direction, receiving repaired / new pump set from store/ divisional store , testing the same, transportation to site and lowering back into tube well along with submersible cable, lowering pipes, specials etc and commissioning of the tube well. The job also includes cable jointing, checking of discharge of pump set, interconnection of lowering pipe from nearby distribution pipe line, checking of starter and reporting for completion of Job or fault/problem if any. (Upto 20 Km distance run by lowering machine)

Development of tube well in accordance with IS : 2800 (Part-I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in Govt / NABL accredited laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Welding of Dry/Abandoned Borewell at site by 12 mm thick Round Sheet MS Sheet

Welding of Dry/Abandoned Borewell at site by 12 mm thick Round Sheet MS Sheet

Welding of Dry/Abandoned Borewell at site by 12 mm thick Round Sheet MS Sheet

Drilling Tube Well 60 mtr Deep By D.R. Method