Drainage Works Tenders

Item- Provide and fixing Steel Anchor (25 mm Dia) with resin bond cement capsule anchorage including drilling holes inserting grout capsule driving anchor cost of all material machinary labour ventillation lighting drainage and other ancillary operation etc. complete with lead up to 1 km and all lifts

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification as per direction of engineer in charge

88 mm, weighing not less than 170 gms 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and 18.10 making good the walls etc.-Internal work - Exposed on wall 98 18.10.1 15 mm dia nominal bore Metre 38 304.15 11557.7 99 18.10.3 25 mm dia nominal bore Metre 24 491.2 11788.8 100 18.10.6 50 mm dia nominal bore Metre 24 893.2 21436.8 Making connection of G.I. distribution branch with G.I. main of following sizes by providing 18.13 and fixing tee, including cutting and threading the pipe etc. complete : 101 18.13.1 25 to 40 mm nominal bore Each 5 757.1 3785.5 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 102 18.15.1 15 mm nominal bore Each 14 303.85 4253.9 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet : 103 18.22.1 100 mm diameter Each 6 166.35 998.1 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES ALIPURDUAR DIVISION-ENGINEERING/N F RLY 18.48 Providing and placing on terrace (at all floor Litre 10000 9.7 97000 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 104 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.65 Providing and fixing PTMT soap Dish Holder Each 10 96.75 967.5 having length of 138mm, breadth 102mm, 105 height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 19.0 DRAINAGE Providing and fixing in position pre-cast R.C.C. 19.19 manhole cover and frame of required shape and approved quality 19.19.1 L D- 2.5 19.19.1.1 Rectangular shape 600x450 mm internal Each 4 1255.25 5021 106 dimensions Raising manhole cover and frame slab to required level including dismantling existing 19.26 slab and making good the damage as required (Raising depth of manhole to be paid separately) : 19.26.2 Rectangular manhole 120x90 cm with circular Each 4 4290.35 17161.4 107 cover 500 mm dia of grade MD - 10 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene 21.1 gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 112 433.95 48602.4 108 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 234 531.8 124441.2 109 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 42 1019.8 42831.6 110 (weight not less than 10kg/sqm) ALIPURDUAR DIVISION-ENGINEERING/N F RLY Total 11367030.24

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specificationMORTH Specification No. 2705

plaques, drainage arrangements etc. and

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2705