Drainage Works Tenders

M&L for PCC kerb stone outer coloured surface machine pressed factory made of size 300 mm long , 300mm wide, 150mm thick using M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete incl form work weathering, slightly rounded or chamfered angles and throating all as specifed and directed

prepare the surface even and smooth complete. 13.37S INTERIOR FINISHING RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 13.41 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 13.41.1 New work (two or more coats) over and Sqm 100 185.65 18565 including water thinnable priming coat with 59 cement primer having VOC content less than 50 gram/litre 13.44S EXTERIOR FINISHING Finishing walls with water proofing cement paint 13.44 of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 Sqm 1320 116.9 154308 60 kg/10 sqm) Finishing walls with Acrylic Smooth exterior 13.46 paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 Sqm 1870 160.6 300322 61 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) Finishing with Deluxe Multi surface paint system 13.48 for interiors and exteriors using Primer as per manufacturers specifications : 13.48.3 Painting Steel work with Deluxe Multi Surface Sqm 40 170.7 6828 Paint to give an even shade. Two or more coat 62 applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 63 13.61.1 Two or more coats on new work Sqm 56 155.9 8730.4 Painting with aluminium paint of approved 13.100 brand and manufacture to give an even shade: 64 13.100.1 One or more coats on old work Sqm 1400 96 134400 16.0 ROAD WORK 16.1S ROADS 16.3 Supplying and stacking at site. 65 16.3.10 Moorum cum 4661 768.25 3580813.25 16.49S MISCELLANEOUS 16.53 Providing and fixing concertina coil fencing with Metre 600 375.8 225480 punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain 66 horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick)and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY 16.90 Providing and laying tactile tile (for vision Sqm 248 2017.6 500364.8 impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, 67 multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 17.0 SANITARY INSTALLATIONS 17.1S General Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.1 manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of Each 16 6767.4 108278.4 68 size 580x440 mm with integral type foot rests Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm 17.7 C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.3 White Vitreous China Wash basin size 550x400 Each 8 2301.75 18414 69 mm with a pair of 15 mm C.P. brass pillar taps 17.23 Providing and fixing white vitreous china flat Each 4 1648.95 6595.8 back or wall corner type lipped front urinal 70 basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 17.24 Providing and fixing white vitreous china Each 8 4048.65 32389.2 71 squatting plate urinal with integral rim longitudinal flush pipe. 17.31 Providing and fixing 600x450 mm bevelled edge Each 8 1607.95 12863.6 mirror of superior glass (of approved quality) 72 complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the 18.7 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 73 18.7.3 25 mm nominal dia Pipes Metre 96 401.55 38548.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY 74 18.8.1 15 mm nominal dia Pipes Metre 200 497.8 99560 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes 18.9 jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 75 18.9.6 50 mm nominal dia Pipes Metre 520 794.25 413010 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and 18.10 making good the walls etc. ( Internal work - Exposed on wall ) 76 18.10.3 25 mm dia nominal bore Metre 500 551.7 275850 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good 18.11 the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 77 18.11.1 15 mm dia nominal bore Metre 136 580.45 78941.2 Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc. External work 78 18.12.1 15 mm dia nominal bore Metre 196 322.15 63141.4 79 18.12.3 25 mm dia nominal bore Metre 96 467.75 44904 80 18.12.6 50 mm dia nominal bore Metre 400 762.15 304860 Making connection of G.I. distribution branch with G.I. main of following sizes by providing 18.13 and fixing tee, including cutting and threading the pipe etc. complete : 81 18.13.2 50 to 80 mm nominal bore Each 10 1785.35 17853.5 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : 82 18.17.4 50 mm nominal bore Each 10 1026.65 10266.5 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 83 18.18.1 15 mm nominal bore Each 12 406.85 4882.2 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Providing and fixing G.I. Union in G.I. pipe 18.46 including cutting and threading the pipe and making long screws etc. complete (New work) : 84 18.46.1 15 mm nominal bore Each 10 318.35 3183.5 85 18.46.6 50 mm nominal bore Each 10 823.8 8238 18.48 Providing and placing on terrace (at all floor Per 16000 11 176000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable locking 86 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 87 18.49.1 15 mm nominal bore Each 8 506.8 4054.4 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of approved 18.54 quality and colour. 18.54.4 15 mm nominal bore, 90 mm long, weighing not Each 32 196.75 6296 88 less than 93 gms RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Providing and fixing PTMT, push cock of 18.57 approved quality and colour. 18.57.1 15 mm nominal bore, 98 mm long, weighing not Each 12 112.8 1353.6 89 less than 75 gms Providing and fixing PTMT grating of approved 18.58 quality and colour. 18.58.1 Circular type 90 18.58.1.1 100 mm nominal dia Each 12 37.6 451.2 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement 19.1 mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 91 19.1.2 150 mm diameter Metre 80 695.8 55664 Total 52219252.20

Granular Sub-base as per Table:- 400-1 Construction of granular sub-base by providing graded Material ,carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 A)Plant mix method (with Mechanically crushed stone only) (b) For Sub-base cum drainage layer or upper sub-base with (i) Grading-V Material

Laying the GI Pipe 80 mm to 150 mm dia at Pole/Wall/Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting