Drainage Works Tenders

quality and make as approved by Engineer - in - charge. Providing and fixing P.V.C. low level flushing cistern with manually 17.18 controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 101 17.18.1 10 litre capacity - White Each 20 1190.65 23813 17.22 Providing and fixing G.I. inlet connection for flush pipe connecting Each 20 142.85 2857 102 with W.C. pan. Providing and fixing P.V.C. waste pipe for sink or wash basin 17.28 including P.V.C. waste fittings complete. 17.28.1 Semi rigid pipe 103 17.28.1.1 32 mm dia Each 10 103.9 1039 17.31 Providing and fixing 600x450 mm bevelled edge mirror of superior Each 10 1607.95 16079.5 glass (of approved quality) complete with 6 mm thick hard board 104 ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing mirror of superior glass (of approved quality) 17.32 and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 105 17.32.1 Circular shape 450 mm dia Each 10 1479.05 14790.5 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm Each 10 231.95 2319.5 long, 200 mm wide with minimum distances of 37 mm from wall 106 face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 17.78 Providing and fixing white vitreous china extended wall mounting Each 5 14999.15 74995.75 water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual 107 flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 18.0 WATER SUPPLY 18.4S PP-R PIPES Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold 18.6 water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work 108 18.6.9 PN - 10 Pipe, 110 mm OD (SDR-11) Metre 100 1301.35 130135 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with 18.7 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 109 18.7.2 20 mm nominal dia Pipes Metre 50 335 16750 110 18.7.3 25 mm nominal dia Pipes Metre 50 401.55 20077.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes 18.9 & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 111 18.9.2 20 mm nominal dia Pipes Metre 50 274.3 13715 112 18.9.3 25 mm nominal dia Pipes Metre 50 355.4 17770 Providing and fixing G.I. pipes complete with G.I. fittings including 18.12 trenching and refilling etc. External work 113 18.12.6 50 mm dia nominal bore Metre 50 762.15 38107.5 114 18.12.8 80 mm dia nominal bore Metre 50 1041.7 52085 18.15S BRASS FITTINGS Providing and fixing ball valve (brass) of approved quality, High or 18.18 low pressure, with plastic floats complete : 115 18.18.1 15 mm nominal bore Each 16 406.85 6509.6 18.31S C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES RATLAM DIVISION-ENGINEERING/WESTERN RLY 18.48 Providing and placing on terrace (at all floor levels) polyethylene Per Litre 5000 11 55000 water storage tank, IS : 12701 marked, with cover and suitable 116 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.63 Providing and fixing PTMT angle stop cock 15 mm nominal bore, Each 15 156.9 2353.5 117 weighing not less than 85 gms 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement 19.36 mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 118 19.36.2 600 mm dia RCC pipes. Metre 10 3934.75 39347.5 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required 21.1 EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating Kg 150 530.9 79635 119 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating Kg 150 634.45 95167.5 120 50 micron) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket 21.3 etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than Sqm 20 1176.8 23536 121 10kg/sqm) 21.17 Providing and fixing anodised aluminium grill (anodised Kg 150 638.35 95752.5 transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineerin-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge)

Manufacture, supply, & delivery of 300mm dia (DWC) structured wall polyethylene / polypropylene piping system with nonsmooth external annular corrugated and smooth internal surface(Double Wall) for nonpressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013 including transportation to anywhere in A.P, excluding all taxes

Drainage spouts complete as per drawing and technical specification Clauses 1209

Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engineer-in-Charge.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. (Note :-Rates include for all cutting and waste and work in all positions as well as in narrow widths.)