Loading
Loading…
Loading…
10,388 results • Best match
Laying of Additional circuit of AB cable in 21 Nos. of various feeder under KESCo., Kanpur
Laying of AB Cable (3x120+1x95+1x16) Sq.mm Including (All Fitting Accessories Providing & Fixing By Contractor M.S.Holding Clamp PCC, M.S. Holding Clamp 4.5"/ 5.5" 50x6 mm, Suspension Clamp With I Hook, Dead End With I Hook,Pericing Connector 120-120 mm, Neutral Connector,Dead End Seeling Cap,NUT Bolt With Double Washer.)As per Technical standard Approved by Kesco/ Uppcl.
Laying of Additional circuit of AB cable in 24 Nos. of various feeder under KESCo., Kanpur
Laying of AB Cable (3x120+1x95+1x16) Sq.mm Including (All Fitting Accessories Providing & Fixing By Contractor M.S.Holding Clamp PCC, M.S. Holding Clamp 4.5"/ 5.5" 50x6 mm, Suspension Clamp With I Hook, Dead End With I Hook,Pericing Connector 120-120 mm, Neutral Connector,Dead End Seeling Cap,NUT Bolt With Double Washer.)As per Technical standard Approved by Kesco/ Uppcl.
Laying of Additional circuit of AB cable in 16 Nos. of various feeder under KESCo., Kanpur
Laying of AB Cable (3x120+1x95+1x16) Sq.mm Including (All Fitting Accessories Providing & Fixing By Contractor M.S.Holding Clamp PCC, M.S. Holding Clamp 4.5"/ 5.5" 50x6 mm, Suspension Clamp With I Hook, Dead End With I Hook,Pericing Connector 120-120 mm, Neutral Connector,Dead End Seeling Cap,NUT Bolt With Double Washer.)As per Technical standard Approved by Kesco/ Uppcl.
Laying of Additional circuit of AB cable in 14 Nos. of various feeder under KESCo., Kanpur
Laying of AB Cable (3x120+1x95+1x16) Sq.mm Including (All Fitting Accessories Providing & Fixing By Contractor M.S.Holding Clamp PCC, M.S. Holding Clamp 4.5"/ 5.5" 50x6 mm, Suspension Clamp With I Hook, Dead End With I Hook,Pericing Connector 120-120 mm, Neutral Connector,Dead End Seeling Cap,NUT Bolt With Double Washer.)As per Technical standard Approved by Kesco/ Uppcl.
Laying of Additional circuit of AB cable in 21 Nos. of various feeder under KESCo., Kanpur
Laying of AB Cable (3x120+1x95+1x16) Sq.mm Including (All Fitting Accessories Providing & Fixing By Contractor M.S.Holding Clamp PCC, M.S. Holding Clamp 4.5"/ 5.5" 50x6 mm, Suspension Clamp With I Hook, Dead End With I Hook,Pericing Connector 120-120 mm, Neutral Connector,Dead End Seeling Cap,NUT Bolt With Double Washer.)As per Technical standard Approved by Kesco/ Uppcl.
MP-LADS-MP-LADS - High mast lights near synthetic track Palakkad medical college in Palakkad Municipality -Electrification-General Electrical Work
90.14.1.1:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)
