Loading…
Loading…
10,920 results • Best match
Annual maintenance contract for carrying out the Preventive/Routine/Breakdown maintenance of various 132/33kV Grid Sub-Stations and allied 132kV Transmission Lines falling under the jurisdiction of TLMD-I, Bemina for the year 2026-27
132 KV Isolators with earthing blade :Installation of new isolator after dismantling of the damaged one including loading, unloading and dragging of the said isolator where ever required. Control cabling , adjustment and carrying out various designated tests after installation etc.
Construction of Adivasi Panorama at Dausa (Raj.)
Supplying and Laying ISI marked P.V.C. insulated submersible cable as per PWD specification for electrical Works confirming to IS:694 and as per IS8130:2013 of 1.1 kV grade. Wire should be made from... Engineer in charge, making connections. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 6.0 Sq.mm 3 core flat / Round
PROVISION OF INTERLOCKING PAVER BLOCK AT NORTH HOWERPORT GROUND AT ICGS MANDAPAM UNDER GE (I) (CG) CHENNAI
Supply, lay / spread in trenches clean dry sand for cushioning of cable to the full width of excavated trench, 8cm thick before laying cable and 15cm thick above the cable, gently punned down, stretching and testing of cable etc., complete all as specified and as directed. Note : Punned thickness only will be considered or payment.
ARC for Erection, Dismantling and Maintenance work of HT,LT Line and Transformer center under Jurisdiction of CHHANI S/Dn Or Any other S/Dn Of Baroda (O & M) Division.
STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING
REPAIR/ MAINTENANCE OF LT SWITCHGEARS, LT CABLES AND CONNECTED ITEMS AT VARIOUS LOCATION UNDER GE(E) MATHURA
M&L for sand cushioning to under ground cable in trenches in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable and punned the sand for protection of cable complete all as specified and as directed. Note:- For payment punned depth shall be measured.
Construction of Record Room In Nagar Palika Campus
... capacitor start, aluminium body & Metallic blade ceiling fan as per PWD specification for electrical Works, Conform to all the performance requirements laid down in IS:374-2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) or Quality Certification such as ISO -9001 ...