ARC for Erection, Dismantling and Maintenance work of HT,LT Line and Transformer center under Jurisdiction of CHHANI S/Dn Or Any other S/Dn Of Baroda (O & M) Division.

SUBJECT : ARC for Erection, Dismantling and Maintenance work of HT,LT Line and Transformer center under Jurisdiction of CHHANI S/Dn Or Any other S/Dn Of

Baroda (O & M) Division.

Sr. Estimated Amount in

Item Code No. Description of Work Unit Rate in Rs.

No. Quantity Rs.

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF CROSS ARMS, CLAMPS ANTI-

CLIMBING DEVICES, DANGER BOARD,INSULATORS, ETC, COMPLETE AND PAINTING OF

FABRICATED MATERIALS AND NUMBERING COMPLETE WITH COST OF PAINTS AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION OF PIT AND REFILLING OF

EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING DEVICES,

2 9902010001 INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE 10 Number 1163

POLES AND NUMBERING WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING

ERECTION STEEL POLES OF 8 TO 9 & 11 METERS INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS, ANTICLIMBING

3 9902010003 DEVICES DANGER BOARD, INSULATORS, ETC. COMPLETE AND PAINTING OF STEEL POLE, 10 Number 1949

FABRICATED MATERIALS USED ON ON THE POLE AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUT SET AND EARTHING.

ERECTION STEEL POLES OF 13 METERS FOR RAILWAY CROSSING ON BG/MG/NG/LINE FOR

0.400/11/22KV OVERHEAD LINE I.E. INCLUDING EXCAVATION OF PIT AND REFILLING OF

EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS, ANTICLIMBING DEVICES DANGER

BOARD, INSULATORS, ETC. COMPLETE AND PAINTING OF STEEL POLES, FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

5 9902010006 ERECTION OF SUPPORT POLE - PSC 3 Number 735

6 9902010007 ERECTION OF SUPPORT POLE - RSJ 3 Number 735

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS PSC

POLE INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH, FIXING OF CHANNELS,

SUPPORTING ANGLES , CLAMPS, ANTI-CLIMBING DEVICES DANGER BOARDS, INSULATORS,

ETC., COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING. ( W/O AB SWITCH ).

ERECTION OF DOUBLE POLE STRUCTURE OF 8 TO 9 METERS STEEL

POLE INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH, FIXING OF CHANNELS,

SUPPORTING ANGLES , CLAMPS, ANTI-CLIMBING DEVICES DANGER BOARDS, INSULATORS,

ETC., COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING. ( W/O AB SWITCH ).

ERECTION OF DOUBLE POLE STRACTURE WITH MOUNTING OF AB SWITCH, DO FUSES OF

METERS, 200 KG PSC POLES INCLUDING EXCA-VATION OF PITS AND REFILLING OF EARTH,

FIXING OF CHANNELS,SUPPORTING ANGLES CLAMPS, ANTI-CLIMBING DEVICES DANGER

BOARD, INSULATORS, DO FUSES, ETC., COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINTS AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRACTURE FOR CTPT INSTALLATION WITH MOUNTING OF AB

SWITCH, DO FUSES OF 8 METERS, 200 KG PSC POLES INCLUDING EXCA-VATION OF PITS AND

REFILLING OF EARTH, FIXING OF CHANNELS,SUPPORTING ANGLES CLAMPS, ANTI-CLIMBING

DEVICES DANGER BOARD, INSULATORS, DO FUSES, ETC., COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINTS AS

PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRACTURE WITH MOUNTING OF

AB SWITCH, DO FUSES, 9 & 11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND

REFILING OF EARTH, FIXING OF CHANNELS, SUPPORTING ANGLE CLAMPS, ANTI-CLIMBING

DEVICES , DANGER BOARDS, INSULATORS, ETC., COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRACTURE FOR CTPT INSTALLATION WITH MOUNTING OF AB

SWITCH, DO FUSES, 9 & 11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND

REFILING OF EARTH, FIXING OF CHANNELS, SUPPORTING ANGLE CLAMPS, ANTI-CLIMBING

DEVICES , DANGER BOARDS, INSULATORS, ETC., COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF SINGLE POLE STRACTURE WITH MOUNTING OF DO FUSES, TRANSFORMERS,

LIGHTENING ARRESTERS, DISTRIBUTION BOX ETC. OF 8 METERS 200 KG PSC POLES

INCLUDING EXCAVATION OF PITS AND REFILING OF EARTH, CARTING OF TRANSFORMERS

990230016 FROM STORE TO SITE, FIXING OF CHANNELS SUPPORTING ANGLES, BRACING CROSS ARMS, 15 Number

CLAMPS ANTI-CLIMBING DEVICE DANGER BOARDS CONDUCTOR AND CABLE WIRING ETC.,

COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRACTURE WITH MOUNTING OF DO FUSES, TRANSFORMERS,

LIGHTENING ARRESTERS AND WITHOUT DISTRIBUTION BOX ETC OF 8 METERS 200 KG

PSC POLES INCLUDING EXCAVATION OF PITS AND REFILING OF EARTH, CARTING OF

14 990230016 TRANSFORMERS FROM STORE TO SITE, FIXING OF CHANNELS SUPPORTING ANGLES, 5 Number 3313

BRACING CROSS ARMS, CLAMPS ANTI-CLIMBING DEVICE DANGER BOARDS CONDUCTOR AND

CABLE WIRING ETC., COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF

AB SWITCH, DO FUSES, 13 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND

REFILING OF EARTH, FIXING OF CHANNELS, SUPPORTING ANGLE CLAMPS, ANTI-CLIMBING

DEVICES , DANGER BOARDSINSULATORS,ETC COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINTS AS

PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRACTURE WITH MOUNTING OF DO FUSES, TRANSFORMERS,

LIGHTENING ARRESTERS, DISTRIBUTION BOX ETC. OF 8 METERS 200 KG PSC POLES

INCLUDING EXCAVATION OF PITS AND REFILING OF EARTH, CARTING OF TRANSFORMERS,

9902030001 FROM STORE TO SITE FIXING OF CHANNELS SUPPORTING ANGLES, BRACING CROSS ARMS, 5 Number

CLAMPS ANTI-CLIMBING DEVICE DANGER BOARDS CONDUCTOR AND CABLE WIRING

ETC.,COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

\\10.25.8.9\aa office\JE - I\JE T-1 CHARGE WORK\TENDER\ABHI\2025\ARC OVERHEAD TENDER 2.7.26\CHHANI\04. SCHEDULE B Page

Vidyut Nagar Colony, Old Padra Road, Vadodara.

Web Site: www.mgvcl.com E-mail:

[email protected]

SUBJECT : ARC for Erection, Dismantling and Maintenance work of HT,LT Line and Transformer center under Jurisdiction of CHHANI S/Dn Or Any other S/Dn Of

Baroda (O & M) Division.

Sr. Estimated Amount in

Item Code No. Description of Work Unit Rate in Rs.

No. Quantity Rs.

ERECTION OF DOUBLE POLE STRACTURE WITH MOUNTING OF DO FUSES, TRANSFORMERS,

LIGHTENING ARRESTERS & WITHOUT DISTRIBUTION BOX ETC OF 8 METERS 200 KG

PSC POLES INCLUDING EXCAVATION OF PITS AND REFILING OF EARTH, CARTING OF

17 9902030001 TRANSFORMERS, FROM STORE TO SITE FIXING OF CHANNELS SUPPORTING ANGLES, 5 Number 7850

BRACING CROSS ARMS, CLAMPS ANTI-CLIMBING DEVICE DANGER BOARDS CONDUCTOR AND

CABLE WIRING ETC.,COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRACTURE WITH MOUNTING OF A B SWITCH, DO FUSE,

TRANSFORMERS, LIGHTENING ARRESTERS, DISTRIBUTION BOX 8 TO 9 & 11 METERS

STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILING OF EARTH,CARTING OF

18 99230017 TRANSFORMERS FROM STORE TO SITE,FIXING OF CHANNELS, SUPPORTING ANGLES, 15 Number 5305

BRACING, CROSS ARMS,CLAMPS, ANTI CLIMBING, DEVICES, DANGER BOARDS, CONDUCTOR

AND CABLE WIRING ETC.COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRACTURE WITH MOUNTING OF A B SWITCH, DO FUSE,

TRANSFORMERS, LIGHTENING ARRESTERS & WITHOUT DISTRIBUTION BOX 8 TO 9 &

METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILING OF EARTH,CARTING

OF TRANSFORMERS FROM STORE TO SITE,FIXING OF CHANNELS, SUPPORTING ANGLES,

BRACING, CROSS ARMS,CLAMPS, ANTI CLIMBING, DEVICES, DANGER BOARDS, CONDUCTOR

AND CABLE WIRING ETC.COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF A B SWITCH, DO FUSE,

TRANSFORMERS, LIGHTENING ARRESTERS, DISTRIBUTION BOX 8 TO 9 & 11 METERS

STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH,CARTING OF

20 9902030012 TRANSFORMERS FROM STORE TO SITE,FIXING OF CHANNELS, SUPPORTING ANGLES, 5 Number 10609

BRACING, CROSS ARMS,CLAMPS, ANTI CLIMBING, DEVICES, DANGER BOARDS, CONDUCTOR

AND CABLE WIRING ETC.COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF A B SWITCH, DO FUSE,

TRANSFORMERS, LIGHTENING ARRESTERS & WITHOUT DISTRIBUTION BOX 8 TO 9 &

METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF

21 9902030012 EARTH,CARTING OF TRANSFORMERS FROM STORE TO SITE,FIXING OF CHANNELS, 3 Number 9385

SUPPORTING ANGLES, BRACING, CROSS ARMS,CLAMPS, ANTI CLIMBING, DEVICES, DANGER

BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF GUY SETS INCLUDING EXCAVATION OF PITS & REFILING OF EARTH, AS PER

STANDARD SPECIFICATION WITH STAY CLAMPS STAY WIRES, ANCHOR ROD, TURN BUCKLE,

EYE BOLT, GUY INSULATOR, CEMENT CONCRETE BLOCK, ETC., BUT EXCLUDING

CONCRETING/ MUFFING OF POLES, GUY ETC., INCLUDING COST OF CEMENT,AND

23 9905010001 5 Cubic Meter 5995

METAL AND WATER ETC., AS PER C.C.M-20 GRADE STANDARD SPECIFICATION .

ERECTION COIL TYPE EARTHING INCLUDING COST OF COAL & SALT, ETC.BUT WITHOUT COST

OF G I WIRE & COIL. AS PER STANDARD SPECIFICATION 10 KG SALT + 10KG COAL.GI WIRE TO

BE PASSED THROUGH PVC RIGID PIPE FOR SUITABLE LENGTH AS PROVIDED BY THE S/DN

ENGR. IN CHARGE

SRTINGING OF 34MM2 ,55MM2,AAA CONDUCTOR, FOR 11 KV & L.T. LINE INCLUDING FIXING

OF INSULATORS, BINDING, JUMPERING, ETC.

SRTINGING OF 100 MM2, ACSR/DOG CONDUCTOR, FOR 11 KV & L.T.LINES

INCLUDING FIXING OF INSULATORS, BINDING, JUMPERING, ETC.

THE WORK OF STRINGING OF ABC OF FOLLOWING SIZES INCLUDING FITTING OF ALL

ACCESSRIES I.E. SPECIAL DESIGN SUSPENSION / TENASION CLAMP, FIXING OF CROSS ARM,

27 9903000006 L.T. SHACKLE INSULATOR , ETC. FOR FIXING OF MESSAGER WIRE COMPLETE, AS REQUIRED 2 Kilo Meter 24057

& DIRECTED BY ENGINEER-IN-CHARGE

THE WORK OF STRINGING OF ABC OF FOLLOWING SIZES INCLUDING FITTING OF ALL

ACCESSRIES I.E. SPECIAL DESIGN SUSPENSION / TENASION CLAMP, FIXING OF CROSS ARM,

L.T. SHACKLE INSULATOR , ETC. FOR FIXING OF MESSAGER WIRE COMPLETE, AS REQUIRED

& DIRECTED BY ENGINEER-IN-CHARGE A : 1 X 35MM2 + 1 X 25MM2

THE WORK OF STRINGING OF 11 KV ABC OF FOLLOWING SIZES IN URBAN AREA INCLUDING

FITTING OF ALL ACCESSRIES I.E. SPECIAL DESIGN SUSPENSION / TENASION CLAMP, FIXING

29 9903000007 OF CROSS ARM, BINDING TO PIN INSULATOR,PREPARING SHCKLE POINT JUMPERS ETC AS 1 Kilo Meter 45107

REQUIRED & DIRECTED BY ENGINEER-IN-CHARGE

THE WORK OF STRINGING OF 11 KV ABC OF FOLLOWING SIZES IN RURAL AREA INCLUDING

FITTING OF ALL ACCESSRIES I.E. SPECIAL DESIGN SUSPENSION / TENASION CLAMP, FIXING

30 9903000007 OF CROSS ARM, BINDING TO PIN INSULATOR,PREPARING SHCKLE POINT JUMPERS ETC AS 3 Kilo Meter 48117

REQUIRED & DIRECTED BY ENGINEER-IN-CHARGE A: 3 X95MM2+1X 80MM2 B:

31 9906000002 PROVIDING GUARDING TO HT LINE ON ROAD/RAIL CROSSING 45 Meter 70

32 9906000001 PROVIDING GUARDING OF LT LINE ON ROAD/RAIL CROSSING 55 Meter 70

33 9901000002 LT LINE TAPPING SINGLE PHASE. 25 Number 51

34 9901000003 LT LINE TAPPING THREE PHASE. 25 Number 93

LAYING OF OVER HEAD LT CABLE FOR ROAD CROSSING HT LINE CROSSING AND

TELEPHONE LINE CROSSING ETC (PER SPAN)

Dismentalling of all size (8,9,11,13…mtrs.) of RSJ (girder) Poles including dimentalling of

36 9907000006 relevant channels, cross arms insulators, jumpers, binding, earthing etc. INCLUDING Cr. IN 5 Number 974.5

Dismentalling of PSC Poles including dimentalling of relevant channels, cross arms insulators,

jumpers, binding, earthing etc. INCLUDING Cr. IN STORE

38 9907000009 Dismentalling of conductor from line. INCLUDING Cr.IN STORE 20 Kilo Meter 1055.5

39 9907000012 Dismentalling of 8 MTR PSC D.P.Structure. INCLUDING Cr. IN STORE 20 Number 1322

Dismentalling of 8 MTR PSC POLE Transformer Structure up to 100 kva. INCLUDING Cr. IN

\\10.25.8.9\aa office\JE - I\JE T-1 CHARGE WORK\TENDER\ABHI\2025\ARC OVERHEAD TENDER 2.7.26\CHHANI\04. SCHEDULE B Page

Vidyut Nagar Colony, Old Padra Road, Vadodara.

Web Site: www.mgvcl.com E-mail:

[email protected]

SUBJECT : ARC for Erection, Dismantling and Maintenance work of HT,LT Line and Transformer center under Jurisdiction of CHHANI S/Dn Or Any other S/Dn Of

Baroda (O & M) Division.

Sr. Estimated Amount in

Item Code No. Description of Work Unit Rate in Rs.

No. Quantity Rs.

41 9907000012 Dismentalling of 8 TO 9 MTR STEEL POLE D.P.Structure. INCLUDING Cr. IN STORE 2 Number 1910.5

Dismentling OF 11 KV ABC from line. INCLUDING Cr. IN STORE IN RURAL AREA

INCLUDING REMOVING OF ALL ACCESSRIES

Dismentalling of A.B.Cable from line. INCLUDING Cr. IN STORE OF FOLLOWING SIZES:A:

Dismentalling of A.B.Cable from line. INCLUDING Cr. IN STORE OF FOLLOWING SIZES: A

INSTALLATION OF ENERGY METER & MMB/SMC BOX WITH ELECTRICAL WIRING ON

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC 2.5/4.0 MM2 TWIN

CORECABLE FROM TERMINAL POLE TO METERING POINT INCLUDING FIXING

OFMETER WITH METER EARTHING COMPLETE WORK AS PER STANDARD

SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE FOUR WIRE SERVICE CONNECTION WITH PVC

4MM2/10MM2 FOUR CORE CABLE FROM TERMINAL POLE TO METERING POINT

INCLUDING FIXING OF METER WITH METER EARTHING COMPLETE WORK AS PER

STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

48 9909000001 CARTING OF PSC POLE AT DESTINATION(ABOVE 5 KM) 120 Number 378

49 9909000006 CARTING OF RSJ POLE AT DESTINATION(ABOVE 5 KM) 40 Number 536

REPLACEMENT OF FAIL TRANSFORMER & AUGMENTATION/DEAUGMENTATION OF

50 9908000049 TRANSFORMER(ANY CAPACITY) INCLUDING TRANSPORTATION & CREDIT OF OLD 5 Number 1500

TRANSFORMER AT S/DN STORE.

51 1501000024 M.S. Bolts & Nuts 65x16mm ( 2.5 X 5/8 INCH) 212 KiloGram 108.56

52 1501000031 M.S. Bolts & Nuts 180x16mm ( 7 X 5/8 INCH) 210 KiloGram 108.56

53 1501000038 M.S.Bolts & Nuts 300x16mm (12 X 5/8 INCH) 210 KiloGram 108.56

Proving & Fixing of HEAT SHRINKABLE TYPE CABLE JOINTING KIT SUITABLE FOR

KV 1C X 95 SQ MM AB CABLE FOR OUT DOOR TERMINATION APPLICATION

Proving & Fixing of HEAT SHRINKABLE TYPE CABLE JOINTING KIT SUITABLE FOR

KV 1C X 70 SQ MM AB CABLE FOR OUT DOOR TERMINATION APPLICATION

Erection of SDT earthing :Installation Of EarthingPits By Providing C.I PIPE :13mm

56 9918000135 Thick,3000mm Length,100mm InnerDia.Fabrication & Fixing Of 1)2 GI STRIPS of 50x6mm 1 Number 28280.422

2)1 C.I Plate of 600x600x5 mm For Earthing Connections with Charcoal/salt.

57 9911000071 PATROLLING OF HT/LT LINE - PER POLE 100 Number 4

MAINTENANCE WORK

58 9911000190 RE-JUMPERING OF HT/LT LINE FOR SHACKLE POLE 60 Per Pol 98

REPLACEMENT OF POLE MOUNTED 1PH / 3PH SERVICE CONNECTION BOX INCLUDING

RECONNECTING ALL CONNECTIONS

60 9911000189 Cutting of Tree branches obstructing HT/LT line on one tree 220 Per Tree 60

61 9911000189 Cutting of Tree branches obstructing HT/LT line on one tree 31 Per person per day 477

62 9911000229 PIN BINDING OF 11KV PIN INSULATOR 50 Per Pol 47

63 9911000230 PIN BINDING OF LT LINE PIN OR SHACKLE INSULATOR 25 Per Pol 47

64 9908000003 REPLACEMENT OF 11 KV DISC INSULATOR 25 Number 171

65 9908000166 REPLACEMENT OF LT PIN /SHACKLE INSULATOR 50 Number 37

66 9908000001 REPLACEMENT OF V CROSS - ARMS 25 Set 244

67 9908000051 REPLACEMENT OF TOP FITTING 15 Number 60

68 9908000007 REPLACEMENT OF LT CROSS - ARMS 15 Number 79

PROVIDING DO FUSE OR AB SWITCH ON DP (FOR ONE SET) WITH FABRICATION & COLOUR

CODE JUMPER,INCLUDING PROPER ALIGNMENT OF AB SWITCH CONTACTS

NUMBERING THE POLE WITH PAINT BY PREPARING BACK GROUND OF REQUIRED HEIGHT

SURFACE OF ONE COLOUR AND HAVE LETTERING ( 2" & 3" HT ) AS DIRECTED BY IN CHARGE

ENGINEER .THE TWO COLOUR SHOULD HAVE BEEN SLECTED AS TO HAVE CONTRAST FOR

PROPER READABILITY.(REQUIRED COLOUR TO BE PROVIDED BY CONTRACTER)

71 9911000222 FIXING OF SMC (1-Ph) AT CONSUMER INSTALLATION ( INCLUDING COST OF FASTNERS) 50 Number 98

72 9911000223 FIXING OF SMC (3-Ph) AT CONSUMER INSTALLATION ( INCLUDING COST OF FASTNERS) 25 Number 148

73 9908000023 REPLACEMENT OF METER (1 PH) WITH WIRING - Urban 10 Number 58.13

74 9908000023 REPLACEMENT OF METER (1 PH) WITH WIRING - Rural 10 Number 85.05

75 9911000227 PROVIDING (PAINTING ) CONSUMER No ON SMC/MMB - Rural 10 Number 21.53

76 9911000227 PROVIDING (PAINTING ) CONSUMER No ON SMC/MMB - Urban 91 Number 11.842

REPLACEMENT OF SINGLE PHASE OLD SERVICE BY NEW SERVICE INCL .SHORTFALL REEL

INSULATORS, EGG INSULATORS, NAILS, FIXING FASTNERS ETC.

78 9902040007 ERECTION/PROVIDING LIGHTENING ARRESTOR 30 Number 123

REPAIRING/ADJUSTING TENSION OF EXISTING GUY/STAY SET INCLUDING

PROVIDING/REPLACEMENT OF STAY INSULATOR

REPLACEMENT OF OLD DISTRIBUTION BOX 200 KVA & ABOVE WITH MAKING ALL

CONNECTIONS CRIMPING OF LUGS,NEUTRAL ETC

REPLACEMENT OF OLD DISTRIBUTION BOX UP TO 100 KVA & ABOVE WITH MAKING ALL

CONNECTIONS CRIMPING OF LUGS,NEUTRAL ETC

82 9911000054 PROVIDING LINE SPACER BETWEEN LT LINE CONDUCTOR WITH BINDING 10 Number 37

83 9908000050 REFITTING/REPLACEMENT OF LIGHTENING ARRESTORS 10 Number 37

84 9911000072 THREAD BURNING OF HT/LT LINE 10 Per Span 73

REFIXING AND CHANGING HEIGHT OF TOP FITTING X ARM IN PROPER POSITION WITH SHORT

85 9911000010 FALL BOLTS AND NUTS TO BE PROVIDING BY CONTRACTOR AND DRILLING OF ADDITIONAL 10 Number 73

86 9911000226 REFIXING OF TOP FITTING INPROPER POSITION 11 Number 49

87 9903000004 RESTRINGING OF ACSR/AAC SPAN 10 Kilo Meter 111

88 9911000224 RE-STRINGING OF 11KV A.B.CABLE (ALL SIZE) 10 Per Span 330

\\10.25.8.9\aa office\JE - I\JE T-1 CHARGE WORK\TENDER\ABHI\2025\ARC OVERHEAD TENDER 2.7.26\CHHANI\04. SCHEDULE B Page

MADHYA GUJARAT VIJCOMPANY LIMITED

BARODA (O&M) DIVISION

Vidyut Nagar Colony, Old Padra Road, Vadodara.

Web Site: www.mgvcl.com E-mail:

[email protected]

SUBJECT : ARC for Erection, Dismantling and Maintenance work of HT,LT Line and Transformer center under Jurisdiction of CHHANI S/Dn Or Any other S/Dn Of

Baroda (O & M) Division.

Sr. Estimated Amount in

Item Code No. Description of Work Unit Rate in Rs.

No. Quantity Rs.

89 9911000225 RE-STRINGING OF DOG CONDUCTOR WITH NEW DOUBLE PIN BINDING 19 Per Span 148

90 9908000451 Replacement of 11KV PIN insulator by new Pin Insulator /Composite Pin Insulator 25 Number 56

91 9908000452 Straightening of tilted PSC/RSJ Pole at pin point 30 Number 284

92 9908000453 Straightening of tilted PSC/RSJ Pole at tension point 20 Number 329

93 9908000454 Straightening of tilted D.P. Set (PSC / Girder pole) etc with refilling of stones, morum etc. 40 Number 810

94 9903000009 Un-Bundling of HT ABC 95/70 SQMM 19.5 Kilo Meter 12029

95 9903000008 Stringing of Un-Bundling of HT ABC 95/70 SQMM 19.5 Kilo Meter 6015

96 9911000229 UNBUNDALING RATE:PROVIDING 11KV/22KV PIN INSULATOR WITH SPINDLE 2 Number 23.5

UNBUNDALING RATE:PROVIDING 11 KV DISC INSULATOR WITH HARDWARE AS PER

98 9911000190 UNBUNDLING RATE:PROVIDING JUMPERING OF HT/LT LINE 2 PER POLE 49

UNBUNDLING RATE:PROVIDING OF OF V X ARM/LT X ARM INC. PAINTING and

100 9908000051 UNBUNDLING RATE:PROVIDING OF TOP FITTING 2 Number 30

101 411000055 SUPPLY OF 11 KV INDOOR CABLE BOX FOR 95 SQMM XLPE CABLE 3 Number 1260

102 411000056 SUPPLY OF 11 KV INDOOR CABLE BOX FOR 240 SQMM XLPE CABLE 2 Number 877

103 411000015 SUPPLY OF 11 KV INDOOR CABLE BOX FOR 185 SQMM XLPE CABLE 3 Number 1445

104 411000057 SUPPLY OF 11 KV OUTDOOR CABLE BOX FOR 95 SQMM XLPE CABLE 2 Number 1074

105 411000006 SUPPLY OF 11 KV OUTDOOR CABLE BOX FOR 185 SQMM XLPE CABLE 3 Number 1073

106 411000058 SUPPLY OF 11 KV OUTDOOR CABLE BOX FOR 240 SQMM XLPE CABLE 2 Number 1076

107 411000059 SUPPLY OF 11KV STRAIGHT THROUGH JOINT FOR 95 SQMM XLPE CABLE 3 Number 3025

108 411000074 SUPPLY OF 11KV STRAIGHT THROUGH JOINT FOR 185 SQMM XLPE CABLE 2 Number 2750

109 411000060 SUPPLY OF 11KV STRAIGHT THROUGH JOINT FOR 240 SQMM XLPE CABLE 3 Number 2820

Moulding of cable joint (St.joint,indoor and outdoor) for XLPE cable- labour charges,for Urban

111 9902050002 Moulding of cable joint (St.joint,indoor and outdoor) for XLPE cable- labour charges,forRural 5 Number 3957

TOTAL ESTIMATED AMOUNT Without GST IN RS.

TOTAL ESTIMATED AMOUNT With GST IN RS.

NOTE :- RATE INCLUSIVE/EXCLUSIVE OF GST SHOULD BE CLEARLY MENTIONED IN YOUR QUAOTATION(MENTION IT IN ONLINE PRICEBID ONLY)

IN SCHEDULE ''B'' MENTIONED QUANTIES ARE ESTIMATED. QUANTIIES MAY BE INCREASED OR DECREASED IN EVERY WORKS. BUT ORDER VALUE WILL NOT BE

CHANGED & PAYMENT WILL BE DONE AS PER ACTUAL EXECUSION OF WORKS.

In case of work of HT ABC Unbundaling has to be carried out in this ARC,rates for items mentioned in Sr no:57,61,63,65 & 66 will be considered as half,as per new cost

data received from corporate office for unbundling of HTABC on dtd:15.9.2023 via e-file no:MGCOV/FIN/e-file/2784/2023/7787/technical.

In case any joint fails within one year due to poor workmanship,it should be replaced free of cost by you else, the charges for the same will be

deducted from your bill.

In case of joint is provided departmentally ,a separate record must be maintained at contractor end as well as department lkevel and in such case only moulding of joint

4 item would be claimed.A separate cerificate should have to be attached in every billl for departmentally issued joint moulding and concern sdos must have to certify

seperately for every joint supplied by contractor in each bill.

If the work of cable would not be started within six hours from verbal instruction of Engineer-in-charge from sub-division, the penalty will be charged @ Rs.200/- per

SIGNATURE OF CONTRACTOR EXECUTIVE ENGINEER

(With Rubber Stamp & Date) BARODA O&M DIVISION

\\10.25.8.9\aa office\JE - I\JE T-1 CHARGE WORK\TENDER\ABHI\2025\ARC OVERHEAD TENDER 2.7.26\CHHANI\04. SCHEDULE B Page