Loading
Loading…
Loading…
60,504 results • Best match
RENOVATION WORK OF BASEMENT I.E. SEATING ARRANGEMENT CUBICLES, AIR CONDITIONING, ELECTRICAL WORKS AND TENSILE WORK FOR ROOF AND LIFT PASSENGER ELEVATOR META 200 MLR QTY-1, CAPACITY 06 PERSON 408 KG.
eProcurement System Government of Madhya Pradesh Created By: Sourabh Dwivedi Created Date/Time: 11-Feb-2026 01:44 PM Tender Title: RENOVATION WORK OF BASEMENT Tender ID: 2025_UAD_468568_1
Shifting of 11 KV 3 Phase electrical line and pole for the work construction of Road and CD works OPGS Road to PWD road Under RWES Jharsuguda Non Res Building
Tender Inviting Authority: Executive Engineer, Rural Works Electrical Division, Sambalpur
Annual Plan-2024_2025 Electrification of Nanniyodu GP-PAPPANAMCODE FWC Building Electrification-General Electrical Work
90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)
Development works at Jamdagni Tirath, Jamni in District Jind (Electrical Works only)
Development works at Jamdagni Tirth, Jamni in District Jind (Electrical Works only)
Development of Infrastructure for conversion of existing Overhead structure to HTUG Cable/Installation of RMU/ DTR at different locations under Bolpur Municipality under Bolpur Division under Birbhum Region.
Micro Tunnelling work with laying of HDPE Pipe 160 mm DIA as per instruction of site engineer with laying of UG cable including supply of HDPE Pipe.
Electrification of FHC Swash Clinic under Kodiyathur GPElectrification- General Electrical Work
90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point