Loading…
Loading…
63,671 results • Best match
Electrical
Electrical Works
Electrical works in Upgradation / renovation of Paid Rooms at SMHS Hospital
LED Down lighter (COB Type) (System lumen efficacy ≥120 lm/Watt) Supplying, Installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round /square/ Rectangular) COB Type of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), lifetime of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation ColourMatching) 3, Maximum power consumption should not more than the specified rating andFixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. "complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector 22-24 W (295mm x295mm)
State Plan-Urgent Work at Peppara Dam-Urgent maintenance of the 15 kVA, 3-phase diesel generator kept at the Booster Pump House, including its transportation to Peppara Dam, erection, commissioning, and all allied civil and electrical works-Pipeline
OD300354/2025-2026:Change over switch with panel board - Supply, Installation, Testing and Commissioning of cubicle type, dust and vermin proof, IP-48, wall mounted, front operated, top/bottom cable entry,r MV panel board complying to IS 8623 (with latest amendments) made out of 14/16 SWG thick CRCA sheet fully compartmentalized as per approved design and requirements, hinged doors for all switch gear compartments with door interlock, earthing the doors using 4sqmm braided copper conductor, detachable cover for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc. Name plate, danger notice board, neopreme gaskets for all openable doors & covers, removable gland plates made of 3mm thick sheet steel, all connections and interconnections including mounting the following switch gears and accessories as per approved schematic drawings. The panel shall be fabricated by a CPRI approved vendor. CRCA sheet alone be used for the fabrication . FRP shrouding shall be provided wherever necessary and Louvers for bus bar chamber.1.5sqmm. Copper flexible cable shall be used for control wiring & 2.5sqmm. for CT wiring. GA drawings of Panel boards has to be get approved by the Engineer in charge /Consultant before fabrication of Panel Board.. (a) Incomer: 100A, 4 P change over switch - 1 no.(b) Bus bar: 100A TPN electrolytic grade Aluminum busbar with SMC supports, heat shrinkable sleeves as per color code, etc.,(c) Meters and CTs: RYB phase indicating lamps (lamps shall be LED ) with control Fuses -1 set, Voltmeter -1no., Ammeter (0 -100A) with CT -3nos.(d) Outgoings: (1) 63A, 25kA, TP, MCCB, Ics=100%Icu with adjustable setting range, Spreader Terminals, Phase Barriers and Rotary operating mechanism plus Neutral link - 2 nos.
GENERAL- Maintance work for Sub Treasury Mattanchery under Buildings Section Mattanchery - Replacing damaged or old electrical fittings with new one at Sub Treasury Mattanchery -General Electrical Work
Work Name:GENERAL- Maintance work for Sub Treasury Mattanchery under Buildings Section Mattanchery - Replacing damaged or old electrical fittings with new one at Sub Treasury Mattanchery -General Electrical Work
Civil and Electrical works for Pannaikadu 110/22 KV SS
Supply and Fixing of 3 phase 4 wire 4 way ICDB of 16A per way with 32 A TPN MC switch with suitable MS Cable entry boxes trunking box and internal connections on suitable angle iron frame work etc. Complete with PWD Earthing
DEPOSIT-Kerala Public Service Commission, Thiruvananthapuram-Construction of Verification Hall on the 2nd Floor of District office building-Electrification-Providing EI-Electrical Lift Work