Loading
Loading…
Loading…
6,545 results • Best match
TRD work in c/w Sectioning improvement in BAHL-BRML section & SVDK Station over Jammu division.
Fabrication and supply of Structure Bond of MS Flat size 40X6mm duly painted alongwith fasteners for both leg of Portals (as per RDSO report No. TI/REPORT /PSI/2015/ 00104)
SITC of 5 nos. of 8 Mtr Mini Mast system with 4 x 120W LED Flood Lights at various locations in Wadakkanchery Municipality, Wadakkanchery LAC, Thrissur District under MLASDF 2024-25 of Sri. Xavier Chittilappilly MLA
90.14.1.2 Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)
TNVPM/DRDASavings/Vanur
Supplying and fabrication of steel including cost and conveyance of steel to site and all labour charges for straightening, cutting to length, bending to shape and tying in position and forming grills for all R.C.C works
Re-Tender - Pudukkottai District -Package No.01 Construction of Compound wall, Borewell and Cubical Arrangements at DRDA Office Building Campus in Pudukkottai District
Supplying and fabrication of steel rods including all cost and conveyance and all labour charges and all other incidental charges.
Development of Lake in Alkola Sy No.10 Shivamogga. (Further improvement Work)
Steel Fabrication
C/o 6 Nos Double Lane Bridges and ancillary works on Itanagar-Jotte Road (CMCSRDP-II) (4 Nos Bridges)
Supply and fabrication of steel work at fabricators workshop comprising of Main Girders, Cross Girders, Connecting plates, stringer, stiffening plates etc from steel lates and structural steel of specified grades as per approved drawing including straightening, descaling, degreasing, cutting to size and shape, drilling, welding and grinding, supply of all MS/HTS shop or site bolts, nuts & washers, holding down bolts and nuts etc trial assembling at workshop, one priming coat of shop paint with red lead paint conforming to IS-102 with all labour, material, cost of paints, consumables, stacking inprotected condition etc complete as per specification and as directed by the Engineer-in-Charge (Carriage cost from fabricator workshop to actual bridge site will be paid seperately)