Loading
Loading…
Loading…
6,474 results • Best match
CONSTRUCTION OF COLLECTION WELL AND INTERCEPTION AND DIVERSION I AND D WORKS IN MELVISHARAM MUNICIPALITY
Vibrated Reinforced Cement Concrete M20 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site and cement at site excluding cost and fabrication of steel but form work and centering soft water labour charges for mixing, transporting, placing in position, vibrating and compacting finishing and curing concrete, working at heights, hire charges for Hire charges for Tools and plants, including all other incidental charges, etc., complete as per standard specifications for MAT CONCRETE
This Tender is for Linear Light, Roofing and False Ceiling works under West zone with 2 schedules.
SPLY&EREC STRUCTURAL — FABRICATION AND ERECTION STRUCTURAL STEEL: SUPPLY OF STRUCTURAL STEEL AS PER DRAWING FOR SUPPORTS, CANOPY AS APPROVED BY ENGINEER-IN-CHARGE. FABRICATION AND ERECTION OF CANOPY, COLOURED MILD STEEL ROOF SHEETS, PAINTING, ANCHOR BOLT SUPPLY AND FIXING.
TENDER FOR LINEAR LIGHT, ROOFING AND FALSECEILING SZ AND SWZ. TENDER VALUE AT
SPLY&EREC STRUCTURAL — FABRICATION AND ERECTION STRUCTURAL STEEL: SUPPLY OF STRUCTURAL STEEL AS PER DRAWING FOR SUPPORTS, CANOPY AS APPROVED BY ENGINEER-IN-CHARGE. FABRICATION AND ERECTION OF CANOPY, COLOURED MILD STEEL ROOF SHEETS, PAINTING, ANCHOR BOLT SUPPLY AND FIXING.
SITC of 3 Nos. of 8 Mtr Mini Mast systems with 4 x 150W LED Flood Lights at various locations in Avanur Grama Panchayat, Wadakkanchery LAC, Thrissur District under MLASDF 2023-24 of Sri. Xavier Chittilappilly MLA
90.14.1.2 Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/flats/slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)
IPGMER-SSKM Hospital - Repair rehabilitation and retrofitting of distressed R.C.C structure and other ancillary work of Chest and Cancer building(Electrical Work)_Air Conditioning Works
Supply, fabrication & fixing of 2 Nos. M.S Angle (45x45x5mm) with supporting angle (25x25x5mm) incl. 4" bullet fastener, washer etc. for Window AC Machine incl. Painting with 2 coat of synthetic enameled paint over 2 coat of RO primer (Asian/ICI/ Baerger) support with all accessories and also S&F 20 SWG galvanized base tray for WRAC type AC machine & outside covering of refrigerant pipe if required for water Storage with 1/2 inch ripple fixing by Clamping arrangment as per direction of EIC incl. scafolding, welding, carriage and transportation, dismantling, cutting, fabrication & re-installing window grill with 2 nos. window type Air condition machine support with all accessories.
Supply, laying, Testing and commissioning of Main incomer Electrical cable along with Electrical Panel and other allied electrical works for New Reception building and stores shed at IPR campus, Bhat, Gandhinagar.
Fabrication: The panel shall be fabricated out of 14 (Panel body)/16 SWG (Partition) CRCA sheet steel with necessary bracings and shall be of IP 54 construction as per specifications.The panel shall be provided with support stand, if required or shall be suitable for installation on pedestal/by grouting with required MS chanel/frames. Frames required for installation shall be measured and paid as per separate item of the tender. The panel shall be provided with Door Interlocking Facility. The panel Fabrication shall be as per relevant IS. Treatment / Painting / Powder Coating, The metal parts of the panels shall be treated for anti- corrosive treatments. Surface treatment to panel , frame and all steel parts of the panel shall be carried out through Seven tank process/sand blasting process. After Surface treatment, panel shall be powder coated with approved color shed and finish.