Loading
Loading…
Loading…
6,028 results • Best match
Annual Rate Contract Tender for Erection, of HT/LT LINE & TC work under IDAR-T S/Dn, IDAR DO, UGVCL
DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF FABRICATION AT STORE & STACKING
Annual Rate Contract Tender for Erection, of HT/LT LINE & TC work under KHEROJ S/Dn, IDAR DO, UGVCL
DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF FABRICATION AT STORE & STACKING
Annual Rate Contract Tender for Erection, of HT/LT LINE & TC work under KHEDBRHMA S/Dn, IDAR DO, UGVCL
DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF FABRICATION AT STORE & STACKING
Construction of 33/11 KV GSS SPZ and Laying of 33 KV line from Existing 33 KV Chambal feeder to proposed 33/11 KV GSS SPZ Bharatpur .
Supply & fixing and fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . ( M.S channel 100X50X6 ,M.S angle 75X75X6 )
REPAIR /MAINT TO CERTAIN ROAD FURNITURE AT JALIPA MIL STATION UNDER GE (A) BARMER
M&L in repair for identification sign/cautionary mandatory and information sign board area exc 0.60 Sqm and n exc 1.20 Sqm with thickness not less than 3.0mm aluminium composite panel covered by encapsulated lens type retro reflective sheet (grade 3M type II diamond grade of make 3M/dark eye/SNI ) on both side with green base, including writing of necessary letter/symbols of reflective type fixed on and including stainless steel frame of size 25mmx25mm and hang on 50mm dia stainless steel pipe(fabrication work from SS-304 material) of height 2.4 mtr from ground level to top and post embeded in ground with PCC 1:3:6 TYPE C-2 using 40mm graded aggregate of size 45x45x45cm including necessary excavation and earth work and making plateform of size 150x45x30cm with PCC 1:2:4 using 20mm graded aggregate including necessary formwork and covering all exposed surfacess with black colour glazed ceramic tile (joint less) of size (600x300x7mm) / (450x300x7mm thick over and including 10mm thick backing coat in cement mortar(1:4) set and jointed in neat cement slurry and pointed to match the tiles complete. Note:- The specifaction of board is held with GE(A) Barmer as sketch. The letters and symbols etc on both side shall be as per site requirement of user and as approved by GE. The size and font of wording/ arrow/ symbols as per direction of Engineer In-Charge.
CONTRACT FOR CONSTRUCTION OF NEW STORES FOR CAPACITY ENHANCEMENT OF BIOMASS BRIQUITTE STORAGE AT RCF THAL
DESIGN OF R.C.C. AND STRUCTURAL STEEL FOR CONSTRUCTION OF NEW STORES AND ALLIED WORK FOR CAPACITY ENHANCEMENT OF BIOMASS BRIQUETTE STORAGE AND IN CONUSLTATION WITH RCF AS PER MODIFICATIONS SUGGESTED, EXISTING SITE/SOIL CONDITIONS ALONG WITH PREPARATION OF PROPOSED DRAWINGS, SUBMISSION OF DETAILED DESIGN AND RCC/FABRICATION DRAWINGS AND ISSUE OF STABILITY CERTFICATE AFTER COMPLETION OF WORK.