Fabrication Works Tenders

Supply and placing of Design Mix Concrete M25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, vibrating and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR FOOTINGS, PEDESTALS, PLINTH BEAMS.RCC M25 grade for footings

Fabrication & fitting of 10" dia MS Taper pipe in the delivery

Plain / Reinforced Cement Concrete in Open foundation complete as per Drawing and Technical specifications, including formwork, centering, vibrating , compacting, cost of all materials, usage charges of machinery, curing, lead, lift, loading, unloading, transportation, stacking, finishing the exposed faces neatly etc., All other incidental charges complete as per the direction of Engineer-In-Charge of the work. complete with a lead of concrete mix up to 1 Km (excluding cost of steel and fabrication charges) PCC M20 using 20mm and downsize metal Using Batching plant, transit mixer and manual placing 1. Police station, Sakaleshpur 2. Opposite Bus stand, Sakaleshpur 3. Asshrita Hotel, Sakaleshpur 4. At Km.241.500 5. At Km.243.500 6. At Km. 244.200

Supplying, fabrication, assembling of all types of steel girders of specified spans with structural steel conforming to Quality "B0" Grade Designation E250 conforming to IS:2062, erection / slewing / end launching of steel girders with cranes or any other approved launching methods as per site conditions (not requiring traffic block) on sub-structure including provision of trolley refuges etc., complete as per approved QAP and drawings conforming to IRS-B1-2001 and other relevant codes 1 and specifications. Note: 1. Detailed fabrication and erection drawings & launching methodology will be prepared by the contractor and got approved from Railway. 2. The rate is all inclusive including launching in position, complete in all respect except cost of (i) Painting / Metalising; (ii) Bearings & (iii) HSFG bolts which shall be paid extra under relevant item. 3. The payment shall be made on the theoretical weight of main components and gusset plates only. 4. Payment Schedule: (i) Receipt of material at site: 40% (ii) Fabrication of girders: 20% (iii) Erection/Launching: 20% (iv) Completion in all respects: 20% Plate Girder/Semi Through Girder/Composite Girder (Steel Work)

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. I) For structural members of specified sections weighing less than 22.5 kg/m

2. Sculpture – “शिल्पकला करते हुए बूढ़ा व्यक्ति (The Elder Craftsman)” Desiging, Fabrication of 11 ft high life-size artisan sculpture, executed in FRP 6–8 mm thickness, produced using hand lay-up process, reinforced with CSM 450 gsm and woven roving 600 gsm, surface gelcoat resistant to UV & atmospheric conditions. Internal MS support frame fabricated with IS 806/IS 1161 compliant steel tubes, welded as per IS: 816, ground smooth, inspected by dye-penetration testing at joints, and coated with zinc-rich epoxy primer and PU topcoat. Sculpted tools (hammer, chisel, stone block) to be integral FRP components reinforced with MS inserts where necessary. Exterior finishing in bronze patina multi-layer system including base coat, shading coat, glaze, and weather-protective clear PU. Base: 3.5 ft RCC pedestal (M-20), steel reinforcement Fe-500 grade, chemical anchor fixing system, clad with premium-grade granite slabs (20–25 mm thick), polished to 800–1000 grit, chamfered edges, fixed with stainless steel cramps and polymer-based adhesive. RGB Lighting System: Supply and installation of RGB LED linear lights/spot fixtures, IP65/IP67-rated, with aluminum extrusion channels, PVC/silicone sealing, DMX controller, waterproof driver, 16–18 gauge copper wires, GI conduits, MCB protection, synchronisation of lighting sequences, testing & commissioning. Includes earth connection as per IS:3043, foundation excavation/backfilling, hoisting, alignment using spirit level and temporary supports, protective anti-UV coat, finishing complete