Fabrication Works Tender Results

eProcurement System of Coal India Limited Created By: Manmohan Prasad Created Date/Time: 26-Dec-2025 04:27 PM Tender Title: Dismantling of old and Damaged iron Material and Fabrication of New Skip Pocket outer cover Platform Roof and Lower Platform of Skip Pocket of shaft No. 2, 400 MH at Vertical Section of Moonidih Project, WJ Area Tender ID: 2025_BCCL_347327_1

Charges for dismantling the Spool pieces, multiple port outlet bodies and transition pipes 4 Nos. each after assembling the coal pipe inspection with center feed pipe structures including transportation of supporting material from stores to site and re-fixing the Spool piece, MPO bodies and transition pieces and assembling to its original position and carrying out necessary related works. and devolution of scraps to stores etc. for a mill.(2A to 2F)

Fabrication Supply Installation Testing and Commissioning of Main L.T Panel suitable for 415 Volt, 3 Phase 4 Wire System, 50Hz AC Supply. Panel Shall be fabricated out of 1.6MM thick CRCA Sheet for load bearing and non load bearing members, Gland Plate shall be fabricated out of 2MM thick CRCA Sheet. Panel shall be Powder coated with RAL 7032 Shade for doors and Body and have suitable solid links for Incoming ond Outgoing of the ACB with Electrical Grade Aluminium of 1000 Ampere Capacity supported on DMC/SMC Bus Bar Supports. Earthing shall be done with 25 X 5MM G.I Strip running acroos the Panel Length. The Control Wiring for Metering and Display Instruments shall be done with PVC Insulated 1.1KV Grade multi stranded copper wire of 2.5 Sqmm. Proper Ventilation system for heat disipation shall be provided with Panel including ventialtion fan and louvers. The Panel Shall not be less than 1875 X 2000 X 750 (H,L&D) The Panel shall be fitted with the following switchgear & instruments as mentioned below:-Incoming:- a) 1000A TP ACB, Manually Type with following protection features such as Overload and Shor Circuit protection b) Digital Type Multifuntion Meter, bearing Cl 1 Accuracy without RS485 Port c) Phase Indication Lamp for R-Phase, Y-Phase and B-Phase, 240V A.C d) ACB ON and OFF Indication Lamps e) 6A SP MCB, 10KA Breaking Capacity for Protection and Control Circuit f) 1 Set of 1000/5 CT, CL-1.0, 15VA Burden Tape Wound Outgoing:- a) 55KW Star Delta Starter with ML4 contractors and 200A TP MCCB 36KA Breaking Capacity with suitable Handle and Spreaders: 4 Nos b) 30KW Star Delta Starter with ML3 contractors and 200A TP MCCB 36KA Breaking Capacity with suitable Handle and Spreaders: 4 Nos c) 400A TP MCCB, 36KA Breaking Capacity having thermal Magnetic Release with O/L and S/C Protection : 4 Nos d) 200A TP MCCB, 25KA Breaking Capacity having thermal Magnetic Release with O/L and S/C Protection : 1 Nos. e) 125A TP MCCB, 25KA Breaking Capacity having thermal Magnetic Release with O/L and S/C Protection : 1 Nos. f) 100A TP MCCB, 25KA Breaking Capacity having thermal Magnetic Release with O/L and S/C Protection : 4 Nos.