Food Supply Tender Results

Single platform ( Erbium YAG+ Q-Switch Nd YAG +Dye Vascular + long pulsed ND Yag ) Laser with four hand piece

Description :Residual Current Circuit Breaker with Over current Protection 4P, 16 A, D Curve with Breaking Capacity 10 kA at 415V, 50 Hz and Residual curr ent 30 mA, Impulse current withstand at 8/20 %u03BCs pulses 3 kA, Suitable to Fit with DIN rail clamps as per RDSO Letter no. EL/7.1.108/SBC/355/Non AC C oaches Dt.14/10/2025, (Specification attached) Make Schneider Part no. A9N4P16D + A9V61440 or Equivalent of ABB, Legrand, LK, Siemens only. Note:- (1) Tender specific authorization must be submitted along with the offer (2) Proof of purchase from OEM/authorized dealer & Test Certificate of material to be su bmitted along with Bill document for acceptance of Material supplied. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee Sr.Section Electrical Eng/Central Store/KKF/ADI, WR Gujarat 150.00 Numbers

1.1 A. ● 450 W CW ozone-free xenon lamp ● Display with lamp parameter and usage in hours must be integrated with Lamp housing B. Pulsed Xenon flashlamp ● Power: 60 W, pulse width: 1.5-2.5 microsec, ● Rep rate: up to 100 Hz, mechanical wavelength range: 200-1000 nm) for phosphorescence measurements C. ps-Diode Lasers with a preferable optical output of pulse width of 100 ps, and repetition rate: 2.5 KHz to 20 MHz. Excitation wavelengths: ● 375 ± 10 nm, (Peak power-140mW at 10MHz) ● 405 ± 10 nm, (Peak power-110mW at 10MHz) ● 450 ± 10 nm, (Peak power-50mW at 10MHz) ● 475 ± 10 nm, (Peak power-80mW at 10MHz) ● 510 ± 10 nm, (Peak power-80mW at 10MHz) ● 635 ± 10 nm, (Peak power-30mW at 10MHz) ● 670 ± 10 nm, (Peak power-75mW at 10MHz) ● 785 ± 10 nm, (Peak power-80mW at 10MHz) ● 975 ± 10 nm, (Peak power-30mW at 10MHz) D. LEDs ● 280 ± 10 nm, (Pulse width 1.1 ns) ● 295 ± 10 nm, (Pulse width 1.1 ns) ● 320 ± 10 nm, (Pulse width 1.1 ns) ● 340 ± 10 nm, (Pulse width 1.1 ns) ● 380 ± 10 nm, (Pulse width 1.1 ns) ● 570 ± 10 nm, (Pulse width 1.1 ns) ● 610 ± 10 nm, (Pulse width 1.1 ns) ● The laser/LED driver and heads are fully software-controlled and easy to use. ● All the sources should be used for both TCSPC and MCS measurements. ● time to amplitude converter (full acquisition window length 2.5 nanoseconds to 50 microseconds) ● 256 to 8192 data bins, nominal minimum bin width 305 femtoseconds (TCSPC mode) ● 500 to 8000 data bins, minimum bin width 10 nanoseconds (MCS mode) ● electronic jitter 25 picoseconds CW Lasers for Up Conversion Measurement, 2 W 808 nm and 980 nm CW lasers together with input coupling comprises a shielded mount and Extended Range Pulse Width Control Box.