Furniture & Fixtures Tender Results

eProcurement System Government of Madhya Pradesh Created By: Dayashankar Tripathi Created Date/Time: 27-Mar-2026 06:26 PM Tender Title: SUPPLY OF FURNITURE FOR ADDITIONAL DIRECTOR OFFICE Tender ID: 2026_PWPIU_479583_1

Class Room Table (Dual Desk) with Attached Chair Class 3rd to 5th The product should be in completa knock down structure as much as possible/feasible enabling case in transportation and assemblies within classrooms. The panels are made from 17 ±0.5mm thick Pre-Laminated MDF (IS 14587) with 1 mm PVC edge banding on all sides. Top Dimension shall be 1015mm X 405mm Top Height shall be 635mm. Seat Dimension shall be 1015mm X 279mm. Scat Height shall be 349mm Back dimensions shall be 1015mm X 152mm. Size may vary +/-5mm. Pipe should be ISI marked The Under structure is Made of ERW tubes 25 +0.3mm x 25±0.3mm x1mm ±0.096mm thick 25mm x 50mm 1.2mm thk ±0.096mm the side panel should be made by 0.510mm inside the pipe frame powder coated 50microns(+10) at base which are welded to the desk and seat supports that are made of 25mm x 50mm 1.2mm thk #0096mm thk powder coated 50microns (+10) Stiffeners that are provided between the 2 vertical frames at base and back of seat are made from ERW tubes 25 +0.3mm x 25±0.3mmx1mm ±0096mm thk front panel should be made by 0.6mm CRC iron sheet powder coated 50microns (+10) The tubes are closed with plastic caps Additional horizontal supports of ERW tubes 25±0.3mm x 25±0.3mm x1.2 ±0.096mm thk powder coated 50microns (110) are placed Between front legs and between back legs to add the rigidity of the structure sides angel The storage shelves are made from 17 ±0.5mm thk Pre-Laminated MDF (IS 14587) with 1 mm PVC edge banding on all sides BASED on 25x25x2mm augel iron Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles They are made from 6.0 mm dia MS rods powder coated 50microns (10) The under structure is assembled using 15 Trilobular Taptite screws. Nylon studs are provided on bottom side of RH/LH Frame All Fabricated parts which require welding are MIG/Spot welded The Screw joining Wooden Panels to under structure are Chip Board Screws. All steel structural components shall be made from virgin material and. Recycled steel will not be accepted. All the 8 support should be joint side panel with 9mm screws/elkey bolt, and sand blasting powder coating required and also sample with Testing report MSME Lab Jaipur required