Laboratory Equipment Tender Results

1. Instrument should precisely measure the liquid management properties of performance and technical fabrics, ensuring the comfort and protection that consumers demand. 2. Machine must comply with AATCC 195 and GB/T 21655.2-2019 test standards 3. Upper and lower sensors should be pure gold plated copper pins 4. Machine must have provision for automatic liquid dosing for test solution dispensing (0.22 cc in 20sec) or adjustable. 5. Instrument must be able to test the sample under known stretch percentage up to 50% stretch. 6. At least five samples of stretch sample clamping ring to be provided with the instrument. 7. The parameters that the machine must be able to measure are - Absorption Rate for top and bottom surfaces, Accumulative One-Way Transport Capacity, Max Wetted Radius for top and bottom surfaces, Wetting Time for top and bottom surfaces, Spreading Speed top and bottom surfaces, Accumulative one-way transport index/capability, Overall Moisture Management Capacity 8. Necessary software required for handling and controlling the instrument must be supplied with the machine. Software should be able to grade the test results per AATCC, GB requirements, plus one custom 9-Grade system; and to qualitatively categorize the test samples into one of the 7-type fabric types viz., Water proof fabric, Water repellent fabric, Slow absorbing and slow drying fabric, Fast absorbing and slow drying fabric, Fast absorbing and quick drying fabric, Water penetration fabric, Moisture management fabric 9. The machine must be supplied with sufficient amount of verification fabric for routine checking the performance of the tester, and do adjustment to the tester. 10. The machine must be supplied with Conductivity Meter with Calibration Solution, Conductive Rubber Matt, Standard Testing Solution, Spare Silicon tube, 2 Power Cables, USB Cable, Spare Fuse, Sentinel Hardware Key, USB Disk for Instruction Manual and MMT Software. 11. Instrument should be supplied with PC for results to be collected and stored on a PC. Compatible latest computer system (All in One, i7 latest generation with monitor of 22 inch) with latest Windows preinstalled software with appropriate platform and Scanner Copier printer. 12. Necessary online UPS system with battery should be supplied with the machine 13. OEM should have installed at least 90 numbers of same machine and proper documentary proof has to be submitted along with the bid.

1 Purpose of the machine: Instrument should be suitable to determine air permeability of textiles, nonwovens, foams, face mask etc. 2 Test Head Detection should be through automatic ranging system which detects the size of the installed test head and determines the pressure range required. 3 Machine should be equipped with full color touch screen controller 4 Test results should be stored to the main controller for retrieval or to a USB drive for remote printing 5 The machine should be a floor standing model with accessory storage drawers on the sides for storage of test head and accessory. The machine must have four wheels for easy movements and the wheels should be possible to be locked for safety. 6 The Instrument should be suitable to perform “Face Mask Testing” to EN 14683 7 Instrument should be suitable to perform “Foam Testing” to ASTM D3574 & EN ISO 7231. 8 The instrument should have facility to test larger sample to be evaluated in multiple areas at the same time 9 Test Standard Compliance: Adidas TM 6.08, ASTM D737, ASTM D3574, BS 5636, DIN 53887, EDANA 140.1, EDANA 140.2, EN ISO 7231, EN 14683, GB/T 5453, ISO 9237, JIS L 1096-A, TAPPI T251, NWSP 70.1 10 Measuring accuracy: Should be ± 2 % of the displayed value 11 Test pressure: Should be 10 ~ 2,500 Pa 12 Test head / test area: Should have options for 5, 20, 25, 38, 50 and 100 cm2 13 USB Data port should be available 14 Unit of measure: Should have options for mm/s, cfm, cm3/cm2/s, l/m2/s, l/dm2/min, m3/m2/min, m3/m2/h and dm3/s 15 Measuring range 0.4 – 750 cm3/cm2/s (at 5 cm2 test area) 1 – 10,000 l/ m2/s (at 20 cm2 test area) 1 – 10,000 mm/s (at 20 cm2 test area) 0.6 – 6,000 l/dm2/min (at 20 cm2test area) 0.008 – 5 dm3/s (at 25cm2 test area) 0.1 – 1,300 cfm (at 38 cm2 test area) 0.05 – 700 cm3/cm2/s (at 38 cm2 test area) 0.03 – 400 m3/m2/min (at 38 cm2 test area) 2 – 24,000 m3/m2/h (at 38 cm2 test area) 0.1 – 1,600 l/dm2/min (at 100 cm2 test area) 16 All standard accessories i.e., 20 cm2 Head as Standard for routine verification, Verification Check Plate for - 20 cm2 Test Head, Rubber Plate, Mains Leads with multi-pin plugs, CD/ USB Disk for Instruction manual, Spare Fuse. 17 Included Accessories for TEST ASTM D737; Face Mask Testing to EN 14683 18 Number of Installations: At least 40 installations in reputed company and/or organization 19 Core i7 PC with latest generation, windows 11 professional, laserjet printer, suitable online UPS to be included. ADDITIONAL TERMS AND CONDITIONS TO BE STRICTLY FOLLOWED AS PER NIT