Loading
Loading…
Loading…
516 results • Best match
E-TENDER PROCUREMENT OF DENTAL INSTRUMENTS BY THE PRINCIPAL, DR. R. AHMED DENTAL COLLEGE AND HOSPITAL, KOLKATA-700 014.
Fiber optic laser tip (cable loop)
LAYING, HDD AND ASSOCIATED WORKS OF STEEL PIPELINE UNDER CUTTACK GA FOR CITY GAS DISTRIBUTION NETWORK
Trenching to all depths and to a width to accomodate the carrier pipeline and/or optical fiber cable/cable conduit during lowering & backfilling by excavation in all types of soils including different type of pavement / footpath / roads (other than concrete roads) etc. including breaking, chiselling or otherwise cutting etc. as required and storing excavated soil, reusable materials at designated area as directed by Engineer in charge and to a width to accommodate the pipeline as per the relevant standard/ specification etc. [The minimum depth of the top of pipeline shall be 1.0 m measured from top of pipeline coating to the top of undisturbed surface of the soil or as per SCC/ relevant code, whichever is higher]. Dewatering of trenches if required as per site condition.
Supply, Installation, Testing, Commissioning of ELV Works at Library Block for Kerala University of Digital Sciences, Innovation and Technology, DUK at Technocity, Thiruvananthapuram, Kerala
OD321400/2025-2026 Supplying, installing, testing and commissioning of 6 Core Single Mode Optical Fiber cable Armored with Anti Termite & Anti rodent as per specification.[For Ground Floor Main Rack to each floor Racks]
A : 1. Signaling & Telecommunication arrangements for shifting of Signalling cables at proposed construction of Limited Subway Br No. 217A at SKZR yard at Km No. 202/33-35 B : 1. Signalling & Telecommunication arrangements in view of BPQ-ASAF Sec:Prov safety fencing along the track for speed 130kmph and above using NHAI anti-crash barrier/W-beam steel Fence for 107.40 Km. 2. Signalling & Telecommunication arrangements in view of ASAF-PTKP Sec:Pro safety fencing along the track for speed 130kmph and above using NHAI anti-crash barrier/W- beam steel fencing for114.22 Km 3. Signalling & Telecommunication arrangements in view of PTKP-KZJ Sec: Pro safety fencing along the track for speed 130kmph and above using NHAI anti-crash barrier / W-beam steel fencing 50.34 Km 4. Signalling & Telecommunication arrangements in view of KZJ-MLMG Sec:Prop.safety fencing along the track for speed 130kmph and above using NHAI anti-crash barrier / W- beam steel fencing for105.68km 5. Signalling & Telecommunication arrangements in view of MLMG-KI Sec: Pro.safety fencing along the track for speed 130kmph and above using NHAI anti-crash barrier / W-beam steel fencing for 116.78 Km
Supply and Installation of OFC & E1 Numbers Integrated Device with OFC ports & STM interlinking Interface (E1interface) / 12 interface Six (V.21/V.23)supporting 2W/4W & Six Quad Protection Ports (2W/4W) for individual Six E&Minterfaces suitable for up to 2U height/19 rack mountable for LVCD / Digital Axle Counter / UFSBI/Control Phoneconnectivity on Optical Fiber & E1 (STM) with Automatic Change Over features (E1 to Quad/OFC-OFC-Quad/OFC E1-Quad), Quad health indications for each E&M interface & Potential Free contacts as required by Railways & fourEthernet ports & RS232 ports integrated in the unit / Audible failure uplink resettable buzzer & Dual power supplysupport18VDC to 72 VDC. This includes supply of required optical patch cords for connecting to FDMS unit. one DCto AC adaptor to be provided. Make: TEAMLINK FABIO 2CX/ MROTEC /CISCO/MAPLE (To be inspected by RITES)
High End Surveilliance system
Fiber Optic Cable 1KM Fiber Cable
Construction and Maintenance of Industrial Safety and Security etc at Bodhjungnagar Industrial Estate Tripura PACKAGE 18
Supply, Installation, & Testing of 19" 1U Rack Mounted/ surface mounted aluminum/ CRCA 1.2mm powder coated, Singlemode glass Fiber Optic Cable 24 Port Patch panel/LIU loaded with flangless/screwable duplex adapters for ST/E-2000/SC/LC/MT-RJ/PC type, It should have easy removable Top plate with push buttons, there should be a splice tray installed in the Patch panel/LIU which can handle the fiber cores, splice tray should be PC+ABS material, it should include accessories like mounting hardware, gormetts, heat shrink tubes/sleevs, screws, nuts to install the panel for rack/wallmount applications as per requirment complete in all respect.
