Painting Works Tenders

Pole painting

Custom Bid for Services - For Group-01- Total lumpsum cost (including GST) for PAINTING OF P/L- KAR(3170) SV-7 8 Electric Pole Painting with Al Paint for QTY-200M2 refer SCC & SOW of tender for detailed scope

prepare the surface even and smooth complete. 13.37S INTERIOR FINISHING Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 13.41 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 13.41.1 New work (two or more coats) over and Sqm 2703 185.65 501811.95 including water thinnable priming coat with 41 cement primer having VOC content less than 50 gram/litre 13.44S EXTERIOR FINISHING Finishing walls with Acrylic Smooth exterior 13.46 paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 Sqm 1730 160.6 277838 42 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) Finishing with Deluxe Multi surface paint system 13.48 for interiors and exteriors using Primer as per manufacturers specifications : 13.48.2 Painting wood work with Deluxe Multi Surface Sqm 974.5 176.25 171755.63 Paint of required shade. Two or more coat 43 applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture 13.48.3 Painting Steel work with Deluxe Multi Surface Sqm 244 170.7 41650.8 Paint to give an even shade. Two or more coat 44 applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture 16.0 ROAD WORK 16.1S ROADS Dry brick pitching half brick thick in drains 16.12 including supply of bricks and preparing the surface complete : 16.12.1 With common burnt clay F.P.S. (non modular) Sqm 974.5 644.05 627626.73 45 bricks of class designation 7.5 17.0 SANITARY INSTALLATIONS 17.1S General KATIHAR DIVISION-ENGINEERING/N F RLY Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.1 manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of Each 19 6767.4 128580.6 46 size 580x440 mm with integral type foot rests Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm 17.7 C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.2 White Vitreous China Wash basin size 630x450 Each 19 2226.35 42300.65 47 mm with a single 15 mm C.P. brass pillar tap 17.8 Providing and fixing white vitreous china Each 19 1683.35 31983.65 48 pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, 17.10 including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.2 Kitchen sink without drain board 49 17.10.2.1 610x510 mm bowl depth 200 mm Each 19 4940.8 93875.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and 17.32 size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 50 17.32.2 Rectangular shape 453x357 mm Each 19 1361.8 25874.2 17.33 Providing and fixing 600x120x5 mm glass shelf Each 19 1083.5 20586.5 with edges round off, supported on anodised 51 aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP 17.73 brass screws with concealed fittings arrangement of approved quality and colour. 17.73.2 600 mm long towel rail with total length of 645 Each 19 708.95 13470.05 52 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the 18.7 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 53 18.7.1 15 mm nominal dia Pipes Metre 171 286.8 49042.8 54 18.7.3 25 mm nominal dia Pipes Metre 228 401.55 91553.4 18.15S BRASS FITTINGS Providing and fixing brass bib cock of approved 18.15 quality : 55 18.15.1 15 mm nominal bore Each 57 353.25 20135.25 Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : KATIHAR DIVISION-ENGINEERING/N F RLY 56 18.17.1 25 mm nominal bore Each 19 622.4 11825.6 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per 19000 11 209000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable locking 57 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 766 495.05 379208.3 58 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 133.7 1176.8 157338.16 59 (weight not less than 10kg/sqm) 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having 26.86 minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). 60 26.86.5 Frame size 65 x 100 mm Metre 390.45 1111.3 433907.09 KATIHAR DIVISION-ENGINEERING/N F RLY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw 26.87 withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 61 26.87.1 30 mm thick Sqm 127.3 4346.7 553334.91 Total 28222509.01

Repairing renovation and paintingof ground floor including outside painting of Block Panchayatsamity office Building