Painting Works Tenders

AF1: Painting work on pipelines, tanks, enclosure and other equipments having area more than 10 sq. mtr at a single stretch( in sq. mtr.)

assembly, including radiography of tie-in joints, corrosion, coating and external painting as required, installation of instruments like pressure/ temperature instruments/ gauges alongwith complete SS Tubing works including supply of SS Tube and thier accessories etc., as required, obtaining all statutory clearances, approvals and permissions for the works (wherever required), making of valve pit (for detail refer relevant drawings) for SV Stationscum- tap-off points enclosed with tender filled with sand, excavation and filling in all types of soils including soft/ hard rock for installation of piping/ pipe supports providing pipe supports, area fencing and gate including all associated civil and structural works; painting, finishing, clean-up and restoration of site; preparation of as-built drawings, documents and project records and performing all works as per drawings, specifications, other provisions of Contract document and instructions of Engineer-in-charge. In this item, instead of Brick Work RCC will be done

sources) Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, 4.2 parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 4.2.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural cum 36 9793.75 352575 4 sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 5.0 REINFORCED CEMENT CONCRETE 5.9S FORM WORK Centering and shuttering including strutting, propping etc. and removal 5.9 of form for 5 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 3285 307.95 1011615.75 5.33S DESIGN MIX CONCRETE Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, 5.33 carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 5.33.1 All works upto plinth level 6 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 766 8683.8 6651790.8 5.35 Add for using extra cement in the items of design mix over and above Quintal 300 688.45 206535 7 the specified cement content therein. 13.0 FINISHING 13.44S EXTERIOR FINISHING Finishing with Deluxe Multi surface paint system for interiors and 13.48 exteriors using Primer as per manufacturers specifications : 13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an even Sqm 180 140.05 25209 shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat 8 of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture Painting with synthetic enamel paint of approved brand and 13.61 manufacture to give an even shade : 9 13.61.1 Two or more coats on new work Sqm 2900 131.45 381205 13.71 per letter 36500 5.05 184325 10 Lettering with black Japan paint of approved brand and manufacture per cm height 16.0 ROAD WORK 16.1S ROADS 16.3 Supplying and stacking at site. 11 16.3.2 63 mm to 45 mm size stone aggregate cum 125 1624.5 203062.5 VARANASI DIVN.-ENGG/NORTH EASTERN RLY 12 16.3.7 Stone screening 11.2 mm nominal size (Type B) cum 50 2065.7 103285 16.4 Laying, spreading and compacting stone aggregate of specified sizes to cum 150 865.8 129870 WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper 13 grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . 16.25S SURFACE DRESSING 16.26 Surface dressing on new surface in two coats with bitumen of grade VG Sqm 2520 248 624960 -10 of approved quality using 1.8 kg of bitumen per sqm with 1.5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface 14 for first coat and 1.1 kg. of bitumen per sqm with 1.00 cu. metre of stone chippings 11.2 mm nominal size per 100 sqm of road surface for second coat, including consolidation of each coat separately with road roller of 6 to 8 tonne capacity etc. complete. 16.30S PREMIX CARPET Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen 16.30 with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : 15 16.30.1 On W.B.M. @ 0.75 Kg / sqm Sqm 2520 45.2 113904 Providing and applying tack coat using bitumen emulsion conforming to 16.31 IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. 4 cm thick bitumastic sheet with hot bitumen of approved quality, using stone chippings (60% with 12.5 mm nominal size and 40% with 10 mm nominal size) @ 2.60 cum per 100 sqm and coarse sand @ 2.60 cum 16.39 per 100 sqm of road surface and with bitumen @ 56 kg/cum of stone chippings and @ 128 kg/cum of sand over a tack coat with hot straight run bitumen, including consolidation with road roller of 8 to 10 tonne etc. complete. (tack coat to be paid separately) : 16.39.1 With paving Asphalt grade VG - 10 heated and then mixed with solvent Sqm 2520 427.75 1077930 16 at the rate of 70 grams per kg of asphalt Total 12709326.13

Painting with superior grade enamel paint of approved quality to give an even shade including writing lettering figuring etc. complete as per IRC standers of Bollards with 3 Nos. reflective type 7 cm wide strips including cost of providing new strips.

Only Labour charges for painting the Ornamental designs, cut outs fabricated with steel (Red oxide and Enamel paint will be supplied by departmentally). Note:-1. The rate including the cost of Red Oxide and Enamel paint 2. The above rate excluding GST

Only Labour charges for painting the Ornamental designs, cut outs fabricated with steel (Red oxide and Enamel paint will be supplied by departmentally). Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST