Preparation of small ornamental designs for AE-1 and 2 sections required for Srivari Brahmotsavams, Fairs and festivals etc, in ESD-South,Tirumala for the year 2026-27

Fabrication Charges for preparing ornamental designs with given 6mm / 8 mm / 10 mm Steel duly cutting, bending and welding as per the Drawing drawn on the floor & welding shall be done on the sides of design. Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST

Fabrication charges for providing necessary back support with 8mm/ 10mm / 12mm steel to the design/Cut out duly cutting, bending and welding as directed during execution. Welding shall be done on both sides of design. Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST

Charges for drawing of figures of Deities, Arches, Various designs through an Artist as directed during execution. Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST

Only Labour charges for painting the Ornamental designs, cut outs fabricated with steel (Red oxide and Enamel paint will be supplied by departmentally). Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST

Supply of Semi skilled welder (second class)for preparing the Special multi dimensional ornamental designs in various sizes.

Supply of Semi skilled Bar benders (second class) for preparing the Special multi dimensional ornamental designs in various sizes.

Supply of 6mm MS Steel.

Supply of 8mm MS Steel.

Man Mazdoors for transporting the LED designs from one place to other place and spreading of glue in the ornamental designs etc., works.

Welding electrodes 4 mm dia

Supply of ready mixed Synthetic Enamel paints in all shades Gr- I having VOC(volatile organic compound) content less than 50 grams / lit

Supply of Red-oxide primer paint for iron works Grade -I

Supply of Turpentine

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

Fabrication Charges for preparing ornamental designs with given 6mm / 8 mm / 10 mm Steel duly cutting, bending and welding as per the Drawing drawn on the floor & welding shall be done on the sides of design. Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST

Fabrication charges for providing necessary back support with 8mm/ 10mm / 12mm steel to the design/Cut out duly cutting, bending and welding as directed during execution. Welding shall be done on both sides of design. Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST

Charges for drawing of figures of Deities, Arches, Various designs through an Artist as directed during execution. Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST

Only Labour charges for painting the Ornamental designs, cut outs fabricated with steel (Red oxide and Enamel paint will be supplied by departmentally). Note:-1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST

Supply of Semi skilled welder (second class)for preparing the Special multi dimensional ornamental designs in various sizes.

Supply of Semi skilled Bar benders (second class) for preparing the Special multi dimensional ornamental designs in various sizes.

Supply of 6mm MS Steel.

Supply of 8mm MS Steel.

Man Mazdoors for transporting the LED designs from one place to other place and spreading of glue in the ornamental designs etc., works.

Welding electrodes 4 mm dia

Supply of ready mixed Synthetic Enamel paints in all shades Gr- I having VOC(volatile organic compound) content less than 50 grams / lit

Supply of Red-oxide primer paint for iron works Grade -I

Supply of Turpentine

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

(Rupees Twelve lakhs sixty five thousands eight hundred eighteen and paise seventy only)