Railway Works & Supplies Tenders

"Supply, Installation, testing and Commissioning of Platform dual face, 4 digit, GPS synchronised digital clock as per RDSO spec. RDSO/SPN/TC@47>47@2008 Rev. 3, Amndt- 1 and 19 Amndt.-2 or latest, with LED of Blue/Red/White colour and size approximately 762 x 381 x 228 mm It also includes all fitting arrangements. (Colour to be decided by Railways).Inspection: (i) RDSO/RITES if value of item in work more than 5 lakhs or as per extant policy. (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs or as per extant policy"

150.00 from track, duly digging / scarifying ballast by beaters / wire brushes or any mechanical means, leveling and dressing formation with specified cross slope after salvaging ballast, separating muck by screening the salvaged ballast with contractor's 20mm size sieve, stacking of screened ballast for measurement, disposing off muck at specified locations with all lead & lifts as directed by Engineer in-charge. Note: Payment shall be made for quantity of ballast stacked after screening of retrieved ballast from track. 25mm gap 'in-situ' welding during traffic block and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint to original position and fixing of joggled fish plate at new weld, to be removed after passing of weld in USFD test as directed by Engineer in charge. Note: 1. Welding shall be carried out only by trained welder having valid competency certificate using RDSO approved Alumino Thermit Welding Portions, 3 piece prefabricated mould (ZIRCON WASHED) manually pressed, Single shot crucible fitted with auto tapping thimble and Compressed Air Petrol/LPG preheating technique as per RDSO Specification No IRST/19-2020 with latest amendment. 2. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing. 3. Only required nos. of Joggled fish plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in-Charge after release from track. All other items required shall be supplied by the Contractor.

Item rate for Operation & Maintenance of Month Waste Water Recycling and Treatment Plant - Capacity 200 KLD at NBQS workshop Operations and Maintenance during the period of 11 Months . 2. Manpower deployment for the Operations and Maintenance of the WWRTP. One operator would be deployed for round the clock for day to day maintenance (one person will work for 08 hrs at a time) ,for operations and maintenance of the plant. A technical staff would be deployed as needed to address any technical issues which the Operator would not be able to rectify. 3. All kinds of Repairs & Servicing of the equipment and devices. 4.Periodical cleaning and routine checking of plant shall becarried out for efficient and smooth functioning of the system 5. General Housekeeping of the Plant and Surrounding Areas 6. All Spares, Consumables & Equipment during the O&M period. 7. Treated Water Quality Tests by NABL Certified Laboratory once in three months 1.Rate is including GST andother taxes 2. The quoted price does not include electricity consumption costs required for the Operations & Maintenance of the Plant (electricity will be provided by the railways) 3.Power Back up facilities and running costs will be provided by the railways 4. Sludge Disposal will be carried out by the agency as when reqd. Tentative List of Equipment covered under Operations & Maintenance Schedule 1. Blowers 2.Pumps 3. Membranes 4. Other Equipments including Meters,Sensors, Filter Press and Dosing Pumps. 5. Activated CarbonFilter 6. Electrical Panel etc log book for day to day The quoted price does not include electricity consumption costs required for the Operations & Maintenance of the Plant (electricity will be provided by the railways) 3.Power Back up facilities and running costs will be provided by the railways 4. Sludge Disposal will be carried out by the agency as when reqd. Tentative List of Equipment covered under Operations & Maintenance Schedule 1. Blowers 2.Pumps 3. Membranes 4. Other Equipments including Meters,Sensors, Filter Press and Dosing Pumps. 5. Activated CarbonFilter 6. Electrical Panel etc log book for day to day maintenance for every activity as material consumption ,PH,TDS ,PUMP OPERATION LOG BOOK SHOULD BE MAINTAINED. Nothing extra will be paid the case what so ever may be. Total 22617128.34