Railway Works & Supplies Tenders

Excavation of cable trench as per cable route plan, 1.2 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr wide advised by Engineer-in-charge alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route 14 from bushes etc., covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on Western Railway and instructions of Railway Engineer at site. In case 1m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1.2m.

Supply & Fixing of electrical Cables Of various sizes mentioned below in Track Machine. The work

Description:- Transportation, Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured,

prepare the surface even and smooth complete. Wall painting with acrylic emulsion paint of 13.60 approved brand and manufacture to give an even shade : 28 13.60.1 Two or more coats on new work Sqm 500 137.85 68925 Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 29 13.61.1 Two or more coats on new work Sqm 500 131.45 65725 Applying priming coats with primer of approved 13.85 brand and manufacture, having low VOC (Volatile Organic Compound ) content. JABALPUR DIVISION-ENGG/WEST CENTRAL RLY 13.91 Removing dry or oil bound distemper, water Sqm 1000 20.85 20850 proofing cement paint and the like by 30 scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Wall painting with plastic emulsion paint of 13.98 approved brand and manufacture to give an even shade: 31 13.98.1 One or more coats on old work Sqm 2000 90.85 181700 15.0 DISMANTLING AND DEMOLISHING Taking out doors, windows and clerestory 15.13 window shutters (steel or wood) including stacking within 50 metres lead : 32 15.13.1 Of area 3 sq. metres and below Each 80 118.3 9464 Dismantling tile work in floors and roofs laid in 15.23 cement mortar including stacking material within 50 metres lead. 33 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 2900 60.5 175450 15.56 Dismantling old plaster or skirting raking out Sqm 1000 45.05 45050 joints and cleaning the surface for plaster 34 including disposal of rubbish to the dumping ground within 50 metres lead. 15.60 Disposal of building rubbish / malba / similar cum 400 219.35 87740 unserviceable, dismantled or waste materials by mechanical means, including loading, 35 transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. 16.0 ROAD WORK 16.49S MISCELLANEOUS 16.68 Providing and laying 60mm thick factory made Sqm 60 951 57060 cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, 36 design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. 17.0 SANITARY INSTALLATIONS Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.2 manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.2 W.C. pan with ISI marked black solid plastic seat Each 90 5426.8 488412 37 and lid 17.7A Providing and fixing wash basin with C.I. Each 90 3459.05 311314.5 brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and 38 making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with Each 104 299.35 31132.4 flexible tube upto 1 metre long with S.S. 39 triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. JABALPUR DIVISION-ENGG/WEST CENTRAL RLY Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle 17.18 lever) conforming to IS : 7231, with all fittings and fixtures complete. 40 17.18.1 10 litre capacity - White Each 90 1023.05 92074.5 17.22A Providing and fixing CP Brass 32mm size Bottle Each 104 886.25 92170 41 Trap of approved quality & make and as per the direction of Engineer-in-charge. 17.22B Providing and fixing CP Brass Single lever Each 90 6119.15 550723.5 telephonic wall mixer of quality & make as 42 approved by Engineer in charge. (a) 15 mm nominal dia Providing and fixing P.V.C. waste pipe for sink 17.28 or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 43 17.28.2.1 32 mm dia Each 104 104.35 10852.4 Providing and fixing PTMT Waste Coupling for 17.69 wash basin and sink, of approved quality and colour. 17.69.1 Waste coupling 31 mm dia of 79 mm length and Each 104 103 10712 44 62mm breadth weighing not less than 45 gms 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 45 18.8.1 15 mm nominal dia Pipes Metre 1440 441.15 635256 46 18.8.3 25 mm nominal dia Pipes Metre 338 626.05 211604.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes 18.9 jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-External work 47 18.9.1 15 mm nominal dia Pipes Metre 312 221.35 69061.2 48 18.9.3 25 mm nominal dia Pipes Metre 100 370.65 37065 49 18.9.5 40 mm nominal dia Pipes Metre 100 559.2 55920 18.15S BRASS FITTINGS Providing and fixing brass stop cock of approved 18.16 quality : 50 18.16.1 15 mm nominal bore Each 110 303.85 33423.5 Providing and fixing uplasticised PVC connection 18.21 pipe with brass unions : Providing and fixing C.P. brass shower rose with 18.22 15 or 20 mm inlet : 51 18.22.2 150 mm diameter Each 104 190.1 19770.4 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 52 18.49.1 15 mm nominal bore Each 81 434.2 35170.2 21.0 ALUMINIUM WORK JABALPUR DIVISION-ENGG/WEST CENTRAL RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.3 Polyester powder coated aluminium (minimum Kg 110 474.7 52217 53 thickness of polyester powder coating 50 micron) 22.0 WATER PROOFING 22.6 Providing and laying water proofing treatment Sqm 2000 585.55 1171100 on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of 54 cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. Total 11727742.05