Loading
Loading…
Loading…
1,423 results • Best match
BEAUTIFICATION WORK AT BABU KALYAN SINGH JI SMRITI STHAL NARORA IN DISTT BULANDSHAHAR (U.P).
Supply,Installation,TestingandCommissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specification sasamended,consisting of Mono/Poly Crystallinesilicon solar cells,net metering facility,necessary protections,earthing,mounted on Aluminium/GIstructure of suitable strength with following components complete as required:-(a)Solar Photovoltaic Module of capacity 330W porabove,manufactured in India,conforming to IS 14286/IEC 61215,IS/IEC 61730-Part-1,IS/IEC 61730-Part 2.Solar Photovoltaic Module conversion efficiency shall not be less than16.5%.PV module susedin solar powerplants/systems must be warranted for their output peak watt capacity,which should not be lessthan 90% at the end of 10year sand 80% attheend of 25 years. (b)Power Conditioning Unit (PCU) of 350-800V DC Input voltage rangeand 400VAC,three phase,4wire,50Hz+/2.5Hz,out put voltage suitable to generate AC Power with efficiency not less than97%, to talharmonic distortion less than3%andsuitable foram bienttemperature from 0to50 degree C.The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency.(c) Data Monitoring System complete with accessories.(d)Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands,lugsand other accessories etc. as required.(e) Lightning and surge voltage protection.(f) Connections &I nterconnections by supplying & fixing required size XLPE insulated copper conductor 1.1kV grade armoured power and control cable between solar modules,main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugsando the accessories etc.as required.
CONSTRUCTION OF MSW REFUSE TRANSFER STATION INCLUDING MRF, RRR CENTRE, AND E-WASTE COLLECTION CENTRE, ALONG WITH SUPPLY, INSTALLATION, TESTING, AND COMMISSIONING (SITC) OF MACHINERY/EQUIPMENT FOR BHAVNAGAR MUNICIPAL CORPORATION AT SIDSAR.
1 Supplying and erecting LED Solar street lights with High power White LEDs wattage of 1Watt and above Ea. 22 36,154.97
Supply Installation Testing and Commissioning of Integrated Security Surveillance System at Various Locations in Idukki District
Supply, installation, testing and commissioning of 170W Solar Power System comprising 170W SPV panel, 65Ah 12V SMF battery, 12V 10A solar charge controller with DC adaptor port, DC power supply unit, necessary DC cabling, panel mounting fabrication structure and accessories, designed to provide minimum 24 hours power backup
Canal Water Based Water Supply Project for Construction of 5.00 MLD Water Treatment Plant WTP and other related works including 5 years O and M Part 2 at Samrala Town District Ludhiana Punjab under AMRUT 2 Scheme
Canal Water based Water Supply Project for Construction of 5.0 MLD Water Treatment Plant and other related works including Operation and Maintenance for a period of 05 years (Part-2) and Supplying, Installation, Testing of Solar Panels including other required equipment as per Guidelines of Punjab Energy Development Agency (PEDA) over Raw Water S&S Tanks of Water Treatment Plants with Operation and Maintenance for a period of 07 years under AMRUT 2.0 Scheme Town name Rampura Phul
Improvement of Riding Quality of Kharagdiha-Khijuri Road (Total Length - 16.400 Km.) For The Year 2026-27
Solar Powered Road Marker (Solar Stud) Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode.The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280.The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinkikng in 1 Hz.There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhace the life of the marker and a full charge should provide for a minimum autonomy of 50 hours.The height, width and length of the marker shall not be less than 10mmx100mmx100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively.The weight of the marker shall not exceed 0.5 Kilograms.Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer.)
Construction of High Level Bridge over Dhowae River at ch 41st km and Construction of High Level Bridge over Mudko River at ch 30th km of Dumka-Hansdiha Road under Road Division Dumka for the year 2026-27
Solar Powered Road Marker (Solar Stud) Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode.The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280.The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinkikng in 1 Hz.There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhace the life of the marker and a full charge should provide for a minimum autonomy of 50 hours.The height, width and length of the marker shall not be less than 10mmx100mmx100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively.The weight of the marker shall not exceed 0.5 Kilograms.Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer.) SOR - 8.35 (For Both Bridges)